Subversion Repositories ALCASAR

Rev

Rev 1898 | Rev 1903 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log

Rev Author Line No. Line
672 richard 1
#!/bin/bash
57 franck 2
#  $Id: alcasar.sh 1899 2016-05-19 08:58:02Z raphael.pion $ 
1 root 3
 
4
# alcasar.sh
959 franck 5
 
1157 stephane 6
# ALCASAR Install script -  CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...] 
7
# Ce programme est un logiciel libre ; This software is free and open source
959 franck 8
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence. 
9
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ; 
10
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE. 
11
# Voir la Licence Publique Générale GNU pour plus de détails. 
12
 
967 franck 13
#  team@alcasar.net
959 franck 14
 
1 root 15
# by Franck BOUIJOUX, Pascal LEVANT and Richard REY
16
# This script is distributed under the Gnu General Public License (GPL)
17
 
672 richard 18
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
1007 richard 19
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
1 root 20
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
1534 richard 21
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares : 
22
# Coovachilli, freeradius, mariaDB, apache, netfilter, dansguardian, ntpd, openssl, dnsmasq, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump
1 root 23
 
24
# Options :
376 franck 25
#       -i or --install
26
#       -u or --uninstall
1 root 27
 
376 franck 28
# Functions :
1378 richard 29
#	testing			: connectivity tests, free space test and mageia version test
1221 richard 30
#	init			: Installation of RPM and scripts
31
#	network			: Network parameters
32
#	ACC			: ALCASAR Control Center installation
33
#	CA			: Certification Authority initialization
1837 richard 34
#	time_server		: NTPd configuration
1221 richard 35
#	init_db			: Initilization of radius database managed with MariaDB
1389 richard 36
#	radius			: FreeRadius initialisation
37
#	chilli			: coovachilli initialisation (+authentication page)
38
#	dansguardian		: DansGuardian filtering HTTP proxy configuration
1221 richard 39
#	antivirus		: HAVP + libclamav configuration
1485 richard 40
#	tinyproxy		: little proxy for user filtered with "WL + antivirus" and "antivirus"
1389 richard 41
#	ulogd			: log system in userland (match NFLOG target of iptables)
1873 richard 42
#	nfsen		:	: Configuration of Nfsen Netflow grapher 
1253 richard 43
#	dnsmasq			: Name server configuration
1541 richard 44
#	vnstat			: little network stat daemon
1873 richard 45
#	BL			: Adaptation of Toulouse University BlackList : split into 3 BL (for Dnsmasq, for dansguardian and for Netfilter)
1266 richard 46
#	cron			: Logs export + watchdog + connexion statistics
1389 richard 47
#	fail2ban		: Fail2ban IDS installation and configuration
48
#	gammu_smsd		: Autoregister addon via SMS (gammu-smsd)
1266 richard 49
#	post_install		: Security, log rotation, etc.
1 root 50
 
51
DATE=`date '+%d %B %Y - %Hh%M'`
52
DATE_SHORT=`date '+%d/%m/%Y'`
595 richard 53
Lang=`echo $LANG|cut -c 1-2`
1362 richard 54
mode="install"
1 root 55
# ******* Files parameters - paramètres fichiers *********
1015 richard 56
DIR_INSTALL=`pwd`				# current directory 
57
DIR_CONF="$DIR_INSTALL/conf"			# install directory (with conf files)
58
DIR_SCRIPTS="$DIR_INSTALL/scripts"		# install directory (with script files)
1564 richard 59
DIR_SAVE="/var/Save"				# backup directory (traceability_log, user_db, security_log)
1015 richard 60
DIR_WEB="/var/www/html"				# directory of APACHE
61
DIR_DG="/etc/dansguardian"			# directory of DansGuardian
62
DIR_ACC="$DIR_WEB/acc"				# directory of the 'ALCASAR Control Center'
63
DIR_DEST_BIN="/usr/local/bin"			# directory of ALCASAR scripts
64
DIR_DEST_ETC="/usr/local/etc"			# directory of ALCASAR conf files
65
DIR_DEST_SHARE="/usr/local/share"		# directory of share files used by ALCASAR (dnsmasq for instance)
66
CONF_FILE="$DIR_DEST_ETC/alcasar.conf"		# central ALCASAR conf file
67
PASSWD_FILE="/root/ALCASAR-passwords.txt"	# text file with the passwords and shared secrets
1 root 68
# ******* DBMS parameters - paramètres SGBD ********
1243 richard 69
DB_RADIUS="radius"				# database name used by FreeRadius server
70
DB_USER="radius"				# user name allows to request the users database
1349 richard 71
DB_GAMMU="gammu"				# database name used by Gammu-smsd
1 root 72
# ******* Network parameters - paramètres réseau *******
1469 richard 73
HOSTNAME="alcasar"				# default hostname
1243 richard 74
DOMAIN="localdomain"				# default local domain
1828 richard 75
EXTIF=`/usr/sbin/ip route|grep default|head -n1|cut -d" " -f5`							# EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
76
INTIF=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "lo\|$EXTIF\|tun0"|head -n1|cut -d" " -f2|tr -d ":"`	# INTIF is connected to the consultation network
1148 crox53 77
MTU="1500"
1243 richard 78
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24"	# Default ALCASAR IP address
1 root 79
# ****** Paths - chemin des commandes *******
80
SED="/bin/sed -i"
81
# ****************** End of global parameters *********************
82
 
959 franck 83
license ()
84
{
85
	if [ $Lang == "fr" ]
1538 richard 86
	then
87
		cat $DIR_INSTALL/gpl-warning.fr.txt | more
88
	else
89
		cat $DIR_INSTALL/gpl-warning.txt | more
959 franck 90
	fi
1538 richard 91
	response=0
92
	PTN='^[oOyYnN]$'
93
	until [[ $(expr $response : $PTN) -gt 0 ]]
94
	do
95
		if [ $Lang == "fr" ]
1563 franck 96
			then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
1538 richard 97
			else echo -n "Do you accept the terms of this license (Y/n)? : "
98
		fi
99
		read response
100
	done
101
	if [ "$response" = "n" ] || [ "$response" = "N" ]
102
	then
103
		exit 1
104
	fi
959 franck 105
}
106
 
1 root 107
header_install ()
108
{
109
	clear
110
	echo "-----------------------------------------------------------------------------"
460 richard 111
	echo "                     ALCASAR V$VERSION Installation"
1 root 112
	echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
113
	echo "-----------------------------------------------------------------------------"
1389 richard 114
}
1 root 115
 
116
##################################################################
1221 richard 117
##			Function "testing"			##
1378 richard 118
## - Test of Mageia version					##
1529 richard 119
## - Test of ALCASAR version (if already installed)		##
1342 richard 120
## - Test of free space on /var  (>10G)				##
1005 richard 121
## - Test of Internet access					##
29 richard 122
##################################################################
123
testing ()
124
{
1529 richard 125
# Test of Mageia version
126
# extract the current Mageia version and hardware architecture (i586 ou X64)
127
	fic=`cat /etc/product.id`
128
	unknown_os=0
129
	old="$IFS"
130
	IFS=","
131
	set $fic
132
	for i in $*
133
	do
134
		if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
135
			then 
136
			DISTRIBUTION=`echo $i|cut -d"=" -f2`
137
			unknown_os=`expr $unknown_os + 1`
138
		fi
139
		if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
140
			then 
141
			CURRENT_VERSION=`echo $i|cut -d"=" -f2`
142
			unknown_os=`expr $unknown_os + 1`
143
		fi
144
		if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
145
			then 
146
			ARCH=`echo $i|cut -d"=" -f2`
147
			unknown_os=`expr $unknown_os + 1`
148
		fi
149
	done
150
	IFS="$old"
1362 richard 151
# Test if ALCASAR is already installed
152
	if [ -e $CONF_FILE ]
153
	then
154
		current_version=`cat $CONF_FILE | grep VERSION | cut -d"=" -f2`
1342 richard 155
		if [ $Lang == "fr" ]
1362 richard 156
			then echo -n "La version "; echo -n $current_version ; echo " d'ALCASAR est déjà installée";
157
			else echo -n "ALCASAR Version "; echo -n $current_version ; echo " is already installed";
1342 richard 158
		fi
1362 richard 159
		response=0
160
		PTN='^[oOnNyY]$'
161
		until [[ $(expr $response : $PTN) -gt 0 ]]
162
		do
163
			if [ $Lang == "fr" ]
164
				then echo -n "Voulez-vous effectuer une mise à jour (O/n)? ";
165
				else echo -n "Do you want to update (Y/n)?";
166
			 fi
167
			read response
168
		done
169
		if [ "$response" = "n" ] || [ "$response" = "N" ] 
170
		then
171
			rm -f /tmp/alcasar-conf*
172
		else
1684 richard 173
# Retrieve former NICname
174
			EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2`				# EXTernal InterFace
175
			INTIF=`grep ^INTIF= $CONF_FILE|cut -d"=" -f2`				# INTernal InterFace
1564 richard 176
# Create the current conf file
1362 richard 177
			$DIR_SCRIPTS/alcasar-conf.sh --create
178
			mode="update"
179
		fi
1529 richard 180
	fi
1785 richard 181
	if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "5" ) ]]
1529 richard 182
		then
183
		if [ -e /tmp/alcasar-conf.tar.gz ] # update
1365 richard 184
			then
1529 richard 185
			echo
1378 richard 186
			if [ $Lang == "fr" ]
187
				then	
1529 richard 188
				echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
189
				echo "1 - Récupérez le fichier de configuration actuel (/tmp/alcasar-conf.tar.gz)."
1564 richard 190
				echo "2 - Installez Linux-Mageia 4.1 (cf. doc d'installation)"
1529 richard 191
				echo "3 - recopiez le fichier 'alcasar-conf.tar.gz' dans le répertoire '/tmp' avant de lancer l'installation d'ALCASAR"
1378 richard 192
			else
193
				echo "The automatic update of ALCASAR can't be performed."
1529 richard 194
				echo "1 - Retrieve the configuration file (/tmp/alcasar-conf.tar.gz)"
1564 richard 195
				echo "2 - Install Linux-Mageia 4.1 (cf. installation doc)"
1529 richard 196
				echo "3 - Copy again the file 'alcasar-conf.tar.gz' in the folder '/tmp' before launching the installation of ALCASAR"
1378 richard 197
			fi
1529 richard 198
		else
199
			if [ $Lang == "fr" ]
200
				then	
201
				echo "L'installation d'ALCASAR ne peut pas être réalisée."
202
			else
203
				echo "The installation of ALCASAR can't be performed."
1378 richard 204
			fi
205
		fi
1529 richard 206
		echo
207
		if [ $Lang == "fr" ]
208
			then	
1785 richard 209
			echo "Le système d'exploitation doit être remplacé (Mageia5)"
1529 richard 210
		else
1785 richard 211
			echo "The OS must be replaced (Mageia5)"
1529 richard 212
		fi
213
		exit 0
1342 richard 214
	fi
1529 richard 215
	if [ ! -d /var/log/netflow/porttracker ]
216
		then
217
# Test of free space on /var
218
		free_space=`df -BG --output=avail /var|tail -1|tr -d [:space:]G`
219
		if [ $free_space -lt 10 ]
220
			then
221
			if [ $Lang == "fr" ]
222
				then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
223
				else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
224
			fi
225
		exit 0
226
		fi
227
	fi
1378 richard 228
	if [ $Lang == "fr" ]
784 richard 229
		then echo -n "Tests des paramètres réseau : "
595 richard 230
		else echo -n "Network parameters tests : "
231
	fi
1471 richard 232
# Test of Ethernet links state
1828 richard 233
	DOWN_IF=`/usr/sbin/ip link|grep "NO-CARRIER"|cut -d":" -f2|tr -d " "`
1471 richard 234
	for i in $DOWN_IF
235
	do
236
		if [ $Lang == "fr" ]
237
		then 
238
			echo "Échec"
239
			echo "Le lien réseau de la carte $i n'est pas actif."
240
			echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
241
		else
242
			echo "Failed"
243
			echo "The link state of $i interface is down."
244
			echo "Make sure that this network card is connected to a switch or an A.P."
245
		fi
246
		exit 0
247
	done
248
	echo -n "."
249
 
250
# Test EXTIF config files
1499 richard 251
	PUBLIC_IP_MASK=`ip addr show $EXTIF|grep "inet "|cut -d" " -f6`
252
	PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d"/" -f1`
1686 richard 253
	PUBLIC_GATEWAY=`ip route list|grep $EXTIF|grep ^default|cut -d" " -f3`
1471 richard 254
	if [ `echo $PUBLIC_IP|wc -c` -lt 7 ] || [ `echo $PUBLIC_GATEWAY|wc -c` -lt 7 ]
255
	then
784 richard 256
		if [ $Lang == "fr" ]
257
		then 
258
			echo "Échec"
259
			echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
260
			echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
1362 richard 261
			echo "Appliquez les changements : 'systemctl restart network'"
784 richard 262
		else
263
			echo "Failed"
264
			echo "The Internet connected network card ($EXTIF) isn't well configured."
265
			echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
1362 richard 266
			echo "Apply the new configuration 'systemctl restart network'"
784 richard 267
		fi
830 richard 268
		echo "DEVICE=$EXTIF"
784 richard 269
		echo "IPADDR="
270
		echo "NETMASK="
271
		echo "GATEWAY="
272
		echo "DNS1="
273
		echo "DNS2="
830 richard 274
		echo "ONBOOT=yes"
784 richard 275
		exit 0
276
	fi
277
	echo -n "."
1471 richard 278
 
279
# Test if router is alive (Box FAI)
1686 richard 280
	if [ `ip route list|grep $EXTIF|grep -c ^default` -ne "1" ] ; then
595 richard 281
		if [ $Lang == "fr" ]
282
		then 
283
			echo "Échec"
284
			echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
285
			echo "Réglez ce problème puis relancez ce script."
286
		else
287
			echo "Failed"
288
			echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
289
			echo "Resolv this problem, then restart this script."
290
		fi
29 richard 291
		exit 0
292
	fi
308 richard 293
	echo -n "."
978 franck 294
# On teste le lien vers le routeur par defaut
1499 richard 295
	arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
527 richard 296
	if [ $(expr $arp_reply) -eq 0 ]
308 richard 297
	       	then
595 richard 298
		if [ $Lang == "fr" ]
299
		then 
300
			echo "Échec"
1499 richard 301
			echo "Le routeur de site ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
595 richard 302
			echo "Réglez ce problème puis relancez ce script."
303
		else
304
			echo "Failed"
305
			echo "The Internet gateway doesn't answered"
306
			echo "Resolv this problem, then restart this script."
307
		fi
308 richard 308
		exit 0
309
	fi
310
	echo -n "."
421 franck 311
# On teste la connectivité Internet
29 richard 312
	rm -rf /tmp/con_ok.html
308 richard 313
	/usr/bin/curl www.google.fr -s -o /tmp/con_ok.html
29 richard 314
	if [ ! -e /tmp/con_ok.html ]
315
	then
595 richard 316
		if [ $Lang == "fr" ]
317
		then 
318
			echo "La tentative de connexion vers Internet a échoué (google.fr)."
319
			echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
320
			echo "Vérifiez la validité des adresses IP des DNS."
321
		else
322
			echo "The Internet connection try failed (google.fr)."
323
			echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
324
			echo "Verify the DNS IP addresses"
325
		fi
29 richard 326
		exit 0
327
	fi
328
	rm -rf /tmp/con_ok.html
308 richard 329
	echo ". : ok"
1389 richard 330
} # end of testing ()
302 richard 331
 
332
##################################################################
1221 richard 333
##			Function "init"				##
302 richard 334
## - Création du fichier "/root/ALCASAR_parametres.txt"		##
335
## - Installation et modification des scripts du portail	##
336
##################################################################
337
init ()
338
{
527 richard 339
	if [ "$mode" != "update" ]
302 richard 340
	then
341
# On affecte le nom d'organisme
597 richard 342
		header_install
302 richard 343
		ORGANISME=!
344
		PTN='^[a-zA-Z0-9-]*$'
580 richard 345
		until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
302 richard 346
                do
595 richard 347
			if [ $Lang == "fr" ]
597 richard 348
			       	then echo -n "Entrez le nom de votre organisme : "
349
				else echo -n "Enter the name of your organism : "
595 richard 350
			fi
330 franck 351
			read ORGANISME
613 richard 352
			if [ "$ORGANISME" == "" ]
330 franck 353
				then
354
				ORGANISME=!
355
			fi
356
		done
302 richard 357
	fi
1 root 358
# On crée aléatoirement les mots de passe et les secrets partagés
628 richard 359
	rm -f $PASSWD_FILE
1350 richard 360
	grubpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
361
	echo -n "Password to protect the GRUB boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
628 richard 362
	echo "$grubpwd" >> $PASSWD_FILE
1348 richard 363
	md5_grubpwd=`/usr/bin/openssl passwd -1 $grubpwd`
384 richard 364
	$SED "/^password.*/d" /boot/grub/menu.lst
365
	$SED "1ipassword --md5 $md5_grubpwd" /boot/grub/menu.lst
1350 richard 366
	mysqlpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
1003 richard 367
	echo -n "Name and password of Mysql/mariadb administrator : " >> $PASSWD_FILE
628 richard 368
	echo "root / $mysqlpwd" >> $PASSWD_FILE
1350 richard 369
	radiuspwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
1003 richard 370
	echo -n "Name and password of Mysql/mariadb user : " >> $PASSWD_FILE
628 richard 371
	echo "$DB_USER / $radiuspwd" >> $PASSWD_FILE
1350 richard 372
	secretuam=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
628 richard 373
	echo -n "Shared secret between the script 'intercept.php' and coova-chilli : " >> $PASSWD_FILE
374
	echo "$secretuam" >> $PASSWD_FILE
1350 richard 375
	secretradius=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
628 richard 376
	echo -n "Shared secret between coova-chilli and FreeRadius : " >> $PASSWD_FILE
377
	echo "$secretradius" >> $PASSWD_FILE
378
	chmod 640 $PASSWD_FILE
1828 richard 379
#  copy scripts in in /usr/local/bin
5 franck 380
	cp -f $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown root:root $DIR_DEST_BIN/alcasar* ; chmod 740 $DIR_DEST_BIN/alcasar*
1828 richard 381
#  copy conf files in /usr/local/etc
648 richard 382
	cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown root:apache $DIR_DEST_ETC/alcasar* ; chmod 660 $DIR_DEST_ETC/alcasar*
1828 richard 383
	$SED "s?^radiussecret.*?radiussecret=\"$secretradius\"?g" $DIR_DEST_BIN/alcasar-logout.sh
384
	$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
385
	$SED "s?^DB_USER=.*?DB_USER=\"$DB_USER\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
386
	$SED "s?^radiuspwd=.*?radiuspwd=\"$radiuspwd\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
628 richard 387
# generate central conf file
388
	cat <<EOF > $CONF_FILE
612 richard 389
##########################################
390
##                                      ##
391
##          ALCASAR Parameters          ##
392
##                                      ##
393
##########################################
1 root 394
 
612 richard 395
INSTALL_DATE=$DATE
396
VERSION=$VERSION
397
ORGANISM=$ORGANISME
1748 richard 398
HOSTNAME=$HOSTNAME
923 franck 399
DOMAIN=$DOMAIN
612 richard 400
EOF
628 richard 401
	chmod o-rwx $CONF_FILE
1 root 402
} # End of init ()
403
 
404
##################################################################
1221 richard 405
##			Function "network"			##
1 root 406
## - Définition du plan d'adressage du réseau de consultation	##
595 richard 407
## - Nommage DNS du système 					##
1336 richard 408
## - Configuration de l'interface INTIF (réseau de consultation)##
1 root 409
## - Modification du fichier /etc/hosts				##
410
## - Renseignement des fichiers hosts.allow et hosts.deny	##
411
##################################################################
412
network ()
413
{
414
	header_install
636 richard 415
	if [ "$mode" != "update" ]
416
		then
417
		if [ $Lang == "fr" ]
418
			then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
419
			else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
420
		fi
421
		response=0
422
		PTN='^[oOyYnN]$'
423
		until [[ $(expr $response : $PTN) -gt 0 ]]
1 root 424
		do
595 richard 425
			if [ $Lang == "fr" ]
659 richard 426
				then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
618 richard 427
				else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
595 richard 428
			fi
1 root 429
			read response
430
		done
636 richard 431
		if [ "$response" = "n" ] || [ "$response" = "N" ]
432
		then
433
			PRIVATE_IP_MASK="0"
434
			PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
435
			until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
1 root 436
			do
595 richard 437
				if [ $Lang == "fr" ]
597 richard 438
					then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
439
					else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
595 richard 440
				fi
597 richard 441
				read PRIVATE_IP_MASK
1 root 442
			done
636 richard 443
		else
444
       			PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
445
		fi
595 richard 446
	else
637 richard 447
		PRIVATE_IP_MASK=`grep PRIVATE_IP conf/etc/alcasar.conf|cut -d"=" -f2` 
448
		rm -rf conf/etc/alcasar.conf
1 root 449
	fi
861 richard 450
# Define LAN side global parameters
1740 richard 451
	hostnamectl set-hostname $HOSTNAME.$DOMAIN
977 richard 452
	PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network address (ie.: 192.168.182.0)
1499 richard 453
	private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4`					# last octet of LAN address
977 richard 454
	PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network mask (ie.: 255.255.255.0)
1499 richard 455
	PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2`					# network prefix (ie. 24)
977 richard 456
	PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1`						# ALCASAR private ip address (consultation LAN side)
1499 richard 457
	if [ $PRIVATE_IP == $PRIVATE_NETWORK ]								# when entering network address instead of ip address
458
		then
459
		PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`	
460
		PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
461
	fi	
462
	private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4`						# last octet of LAN address
463
	PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1`		# second network address (ex.: 192.168.182.2)
977 richard 464
	PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX						# ie.: 192.168.182.0/24
1499 richard 465
	classe=$((PRIVATE_PREFIX/8))									# ie.: 2=classe B, 3=classe C
977 richard 466
	PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`.				# compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
467
	PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2`			# private network broadcast (ie.: 192.168.182.255)
1499 richard 468
	private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f4`				# last octet of LAN broadcast
469
	PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`	# First network address (ex.: 192.168.182.1)
837 richard 470
	PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1`	# last network address (ex.: 192.168.182.254)
1828 richard 471
	PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'` 	# MAC address of INTIF
841 richard 472
# Define Internet parameters
1613 franck 473
	DNS1=`grep ^nameserver /etc/resolv.conf|awk -F" " '{print $2}'|head -n 1`				# 1st DNS server
1499 richard 474
	nb_dns=`grep ^nameserver /etc/resolv.conf|wc -l`
475
	if [ $nb_dns == 2 ]
476
		then
477
		DNS2=`grep ^nameserver /etc/resolv.conf|cut -d" " -f2|tail -n 1`			# 2nd DNS server (if exist)
478
	fi
70 franck 479
	DNS1=${DNS1:=208.67.220.220}
480
	DNS2=${DNS2:=208.67.222.222}
1499 richard 481
	PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
1052 richard 482
	PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
1069 richard 483
	PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
1499 richard 484
# Wrtie the conf file
1469 richard 485
	echo "EXTIF=$EXTIF" >> $CONF_FILE
486
	echo "INTIF=$INTIF" >> $CONF_FILE
1499 richard 487
	IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2`		# IP setting (static or dynamic)
488
	if [ $IP_SETTING == "dhcp" ]
489
		then
490
		echo "PUBLIC_IP=dhcp" >> $CONF_FILE
1585 richard 491
		echo "GW=dhcp" >> $CONF_FILE
1499 richard 492
	else
493
		echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
1585 richard 494
		echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
1499 richard 495
	fi
1587 richard 496
	echo "DNS1=$DNS1" >> $CONF_FILE
497
	echo "DNS2=$DNS2" >> $CONF_FILE
994 franck 498
	echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
628 richard 499
	echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
1484 richard 500
	echo "DHCP=on" >> $CONF_FILE
914 franck 501
	echo "EXT_DHCP_IP=none" >> $CONF_FILE
502
	echo "RELAY_DHCP_IP=none" >> $CONF_FILE
503
	echo "RELAY_DHCP_PORT=none" >> $CONF_FILE
1488 richard 504
	echo "PROTOCOLS_FILTERING=off" >> $CONF_FILE
1610 franck 505
	echo "INT_DNS_DOMAIN=none" >> $CONF_FILE
506
	echo "INT_DNS_IP=none" >> $CONF_FILE
507
	echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
1499 richard 508
# network default
597 richard 509
	[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
1 root 510
	cat <<EOF > /etc/sysconfig/network
511
NETWORKING=yes
512
FORWARD_IPV4=true
513
EOF
1499 richard 514
# /etc/hosts config
1 root 515
	[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
516
	cat <<EOF > /etc/hosts
503 richard 517
127.0.0.1	localhost
1736 richard 518
$PRIVATE_IP	$HOSTNAME.$DOMAIN $HOSTNAME
1 root 519
EOF
1499 richard 520
# EXTIF (Internet) config
521
	[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
522
	if [ $IP_SETTING == "dhcp" ]
523
		then
524
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
14 richard 525
DEVICE=$EXTIF
1585 richard 526
BOOTPROTO=dhcp
527
DNS1=127.0.0.1
528
PEERDNS=no
529
RESOLV_MODS=yes
530
ONBOOT=yes
1613 franck 531
NOZEROCONF=yes
1585 richard 532
METRIC=10
533
MII_NOT_SUPPORTED=yes
534
IPV6INIT=no
535
IPV6TO4INIT=no
536
ACCOUNTING=no
537
USERCTL=no
538
MTU=$MTU
539
EOF
540
		else	
541
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
542
DEVICE=$EXTIF
14 richard 543
BOOTPROTO=static
597 richard 544
IPADDR=$PUBLIC_IP
545
NETMASK=$PUBLIC_NETMASK
546
GATEWAY=$PUBLIC_GATEWAY
14 richard 547
DNS1=127.0.0.1
1499 richard 548
RESOLV_MODS=yes
14 richard 549
ONBOOT=yes
550
METRIC=10
1610 franck 551
NOZEROCONF=yes
14 richard 552
MII_NOT_SUPPORTED=yes
553
IPV6INIT=no
554
IPV6TO4INIT=no
555
ACCOUNTING=no
556
USERCTL=no
994 franck 557
MTU=$MTU
14 richard 558
EOF
1499 richard 559
	fi
1336 richard 560
# Config INTIF (consultation LAN) in normal mode
841 richard 561
	cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
562
DEVICE=$INTIF
563
BOOTPROTO=static
564
ONBOOT=yes
565
NOZEROCONF=yes
566
MII_NOT_SUPPORTED=yes
567
IPV6INIT=no
568
IPV6TO4INIT=no
569
ACCOUNTING=no
570
USERCTL=no
571
EOF
1558 richard 572
	cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
1336 richard 573
# Config of INTIF in bypass mode (see "alcasar-bypass.sh")
1554 richard 574
	cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
1 root 575
DEVICE=$INTIF
576
BOOTPROTO=static
577
IPADDR=$PRIVATE_IP
604 richard 578
NETMASK=$PRIVATE_NETMASK
1 root 579
ONBOOT=yes
580
METRIC=10
581
NOZEROCONF=yes
582
MII_NOT_SUPPORTED=yes
14 richard 583
IPV6INIT=no
584
IPV6TO4INIT=no
585
ACCOUNTING=no
586
USERCTL=no
1 root 587
EOF
588
# Renseignement des fichiers hosts.allow et hosts.deny
589
	[ -e /etc/hosts.allow.default ]  || cp /etc/hosts.allow /etc/hosts.allow.default
590
	cat <<EOF > /etc/hosts.allow
591
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
604 richard 592
sshd: ALL
1 root 593
ntpd: $PRIVATE_NETWORK_SHORT
594
EOF
595
	[ -e /etc/host.deny.default ]  || cp /etc/hosts.deny /etc/hosts.deny.default
596
	cat <<EOF > /etc/hosts.deny
597
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
598
EOF
790 richard 599
	chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
860 richard 600
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
1069 richard 601
	echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
790 richard 602
# load conntrack ftp module
603
	[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
1705 richard 604
	echo "nf_conntrack_ftp" >>  /etc/modprobe.preload
1159 crox53 605
# load ipt_NETFLOW module
606
	echo "ipt_NETFLOW" >>  /etc/modprobe.preload
1513 richard 607
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
608
[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
609
$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
610
[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
1833 richard 611
$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
1157 stephane 612
# 
860 richard 613
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
1 root 614
} # End of network ()
615
 
616
##################################################################
1221 richard 617
##			Function "ACC"				##
1898 richard 618
## - installation of then ALCASAR Control Center (ACC)	)	##
619
## - configuration of the web server (Apache)			##
620
## - creation of the first ACC admin account 			##
621
## - secure the access						##
1 root 622
##################################################################
1221 richard 623
ACC ()
1 root 624
{
625
	[ -d $DIR_WEB ] && rm -rf $DIR_WEB
626
	mkdir $DIR_WEB
1833 richard 627
# Copy & adapt ACC files
316 richard 628
	cp -rf $DIR_INSTALL/web/* $DIR_WEB/
972 richard 629
	echo "$VERSION" > $DIR_WEB/VERSION
316 richard 630
	$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
631
	$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
632
	$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
633
	$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
634
	chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
5 franck 635
	chown -R apache:apache $DIR_WEB/*
1833 richard 636
# copy & adapt "freeradius-web" files
637
	cp -rf $DIR_CONF/freeradius-web/ /etc/
638
	[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
639
	$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
640
	$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
641
	$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
642
	cat <<EOF > /etc/freeradius-web/naslist.conf
643
nas1_name: alcasar-$ORGANISME
644
nas1_model: Network Access Controler
645
nas1_ip: $PRIVATE_IP
646
nas1_port_num: 0
647
nas1_community: public
648
EOF
649
	chown -R apache:apache /etc/freeradius-web/
650
# create the log & backup structure :
1489 richard 651
# - base = users database
652
# - archive = tarball of "base + http firewall + netflow"
1833 richard 653
# - security = watchdog log
1564 richard 654
	for i in base archive security;
1 root 655
	do
656
		[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
657
	done
5 franck 658
	chown -R root:apache $DIR_SAVE
1833 richard 659
# Configuring & securing php
71 richard 660
	[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
534 richard 661
	timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
662
	$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
411 richard 663
	$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
664
	$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
71 richard 665
	$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
666
	$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
1833 richard 667
# Configuring & sécuring Apache
790 richard 668
	rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
1 root 669
	[ -e /etc/httpd/conf/httpd.conf.default ] || cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.default
1243 richard 670
	$SED "s?^#ServerName.*?ServerName $HOSTNAME.$DOMAIN?g" /etc/httpd/conf/httpd.conf
303 richard 671
	$SED "s?^Listen.*?Listen $PRIVATE_IP:80?g" /etc/httpd/conf/httpd.conf
1532 richard 672
	$SED "s?Options Indexes.*?Options -Indexes?g" /etc/httpd/conf/httpd.conf
673
	echo "ServerTokens Prod" >> /etc/httpd/conf/httpd.conf
674
	echo "ServerSignature Off" >> /etc/httpd/conf/httpd.conf
675
	[ -e /etc/httpd/conf/modules.d/00_base.conf.default ] || cp /etc/httpd/conf/modules.d/00_base.conf /etc/httpd/conf/modules.d/00_base.conf.default
676
	$SED "s?^LoadModule authn_anon_module.*?#LoadModule authn_anon_module modules/mod_authn_anon.so?g" /etc/httpd/conf/modules.d/00_base.conf
677
	$SED "s?^LoadModule status_module.*?#LoadModule status_module modules/mod_status.so?g" /etc/httpd/conf/modules.d/00_base.conf
678
	$SED "s?^LoadModule info_module.*?#LoadModule info_module modules/mod_info.so?g" /etc/httpd/conf/modules.d/00_base.conf
679
	$SED "s?^LoadModule imagemap_module.*?#LoadModule imagemap_module modules/mod_imagemap.so?g" /etc/httpd/conf/modules.d/00_base.conf
680
	$SED "s?^LoadModule rewrite_module.*?#LoadModule rewrite_module modules/mod_rewrite.so?g" /etc/httpd/conf/modules.d/00_base.conf
681
	$SED "s?^LoadModule speling_module.*?#LoadModule speling_module modules/mod_speling.so?g" /etc/httpd/conf/modules.d/00_base.conf
1359 richard 682
	[ -e /etc/httpd/conf/conf.d/ssl.conf.default ] || cp /etc/httpd/conf/conf.d/ssl.conf /etc/httpd/conf/conf.d/ssl.conf.default
1702 richard 683
	echo "Listen $PRIVATE_IP:443" > /etc/httpd/conf/conf.d/ssl.conf # Listen only on INTIF
684
	echo "SSLProtocol all -SSLv2 -SSLv3" >> /etc/httpd/conf/conf.d/ssl.conf  # exclude vulnerable protocols
685
	echo "SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS" >> /etc/httpd/conf/conf.d/ssl.conf # Define the cipher suite
686
	echo "SSLHonorCipherOrder on" >> /etc/httpd/conf/conf.d/ssl.conf # The Browser must respect the order of the cipher suite
687
	echo "SSLPassPhraseDialog  builtin" >> /etc/httpd/conf/conf.d/ssl.conf # in case of passphrase the dialog will be perform on stdin
688
	echo "SSLSessionCache \"shmcb:/run/httpd/ssl_scache(512000)\"" >> /etc/httpd/conf/conf.d/ssl.conf # default cache size
689
	echo "SSLSessionCacheTimeout 300" >> /etc/httpd/conf/conf.d/ssl.conf # default cache time in seconds
1532 richard 690
# Error page management
1534 richard 691
[ -e /etc/httpd/conf/conf.d/multilang-errordoc.conf.default ] || cp /etc/httpd/conf/conf.d/multilang-errordoc.conf /etc/httpd/conf/conf.d/multilang-errordoc.conf.default
692
cat <<EOF > /etc/httpd/conf/conf.d/multilang-errordoc.conf
1532 richard 693
Alias /error/ "/var/www/html/"
694
<Directory "/usr/share/httpd/error">
695
    AllowOverride None
696
    Options IncludesNoExec
697
    AddOutputFilter Includes html
698
    AddHandler type-map var
699
    Require all granted
700
    LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
701
    ForceLanguagePriority Prefer Fallback
702
</Directory>
703
ErrorDocument 400 /error/error.php?error=400
704
ErrorDocument 401 /error/error.php?error=401
705
ErrorDocument 403 /error/error.php?error=403
706
ErrorDocument 404 /error/error.php?error=404
707
ErrorDocument 405 /error/error.php?error=405
708
ErrorDocument 408 /error/error.php?error=408
709
ErrorDocument 410 /error/error.php?error=410
710
ErrorDocument 411 /error/error.php?error=411
711
ErrorDocument 412 /error/error.php?error=412
712
ErrorDocument 413 /error/error.php?error=413
713
ErrorDocument 414 /error/error.php?error=414
714
ErrorDocument 415 /error/error.php?error=415
715
ErrorDocument 500 /error/error.php?error=500
716
ErrorDocument 501 /error/error.php?error=501
717
ErrorDocument 502 /error/error.php?error=502
718
ErrorDocument 503 /error/error.php?error=503
719
ErrorDocument 506 /error/error.php?error=506
720
EOF
1359 richard 721
	[ -e /usr/share/httpd/error/include/top.html.default ] || cp /usr/share/httpd/error/include/top.html /usr/share/httpd/error/include/top.html.default
722
	$SED "s?background-color.*?background-color: #EFEFEF; }?g" /usr/share/httpd/error/include/top.html
723
	[ -e /usr/share/httpd/error/include/bottom.html.default ] || cp /usr/share/httpd/error/include/bottom.html /usr/share/httpd/error/include/bottom.html.default
724
	cat <<EOF > /usr/share/httpd/error/include/bottom.html
1 root 725
</body>
726
</html>
727
EOF
728
# Définition du premier compte lié au profil 'admin'
1833 richard 729
if [ "$mode" = "install" ]
730
	then
1676 richard 731
		header_install
613 richard 732
		admin_portal=!
733
		PTN='^[a-zA-Z0-9-]*$'
734
		until [[ $(expr $admin_portal : $PTN) -gt 0 ]]
735
                	do
736
			header_install
737
			if [ $Lang == "fr" ]
738
			then 
739
				echo ""
740
				echo "Définissez un premier compte d'administration du portail :"
741
				echo
742
				echo -n "Nom : "
743
			else
744
				echo ""
745
				echo "Define the first account allow to administrate the portal :"
746
				echo
747
				echo -n "Account : "
748
			fi
749
			read admin_portal
750
			if [ "$admin_portal" == "" ]
751
				then
752
				admin_portal=!
753
			fi
754
			done
1268 richard 755
# Creation of keys file for the admin account ("admin")
510 richard 756
		[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
757
		mkdir -p $DIR_DEST_ETC/digest
758
		chmod 755 $DIR_DEST_ETC/digest
759
		until [ -s $DIR_DEST_ETC/digest/key_admin ]
760
			do
1748 richard 761
				/usr/bin/htdigest -c $DIR_DEST_ETC/digest/key_admin "ALCASAR Control Center (ACC)" $admin_portal
510 richard 762
			done
1828 richard 763
		$DIR_DEST_BIN/alcasar-profil.sh --list
1833 richard 764
fi
765
# ACC partitioning
988 franck 766
	rm -f /etc/httpd/conf/webapps.d/alcasar*
1 root 767
	cat <<EOF > /etc/httpd/conf/webapps.d/alcasar.conf
316 richard 768
<Directory $DIR_ACC>
1 root 769
	SSLRequireSSL
770
	AllowOverride None
771
	Order deny,allow
772
	Deny from all
773
	Allow from 127.0.0.1
774
	Allow from $PRIVATE_NETWORK_MASK
775
	require valid-user
776
	AuthType digest
1748 richard 777
	AuthName "ALCASAR Control Center (ACC)" 
1747 richard 778
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 779
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 780
	AuthUserFile $DIR_DEST_ETC/digest/key_all
1243 richard 781
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 782
</Directory>
316 richard 783
<Directory $DIR_ACC/admin>
1 root 784
	SSLRequireSSL
785
	AllowOverride None
786
	Order deny,allow
787
	Deny from all
788
	Allow from 127.0.0.1
789
	Allow from $PRIVATE_NETWORK_MASK
790
	require valid-user
791
	AuthType digest
1748 richard 792
	AuthName "ALCASAR Control Center (ACC)" 
1747 richard 793
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 794
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 795
	AuthUserFile $DIR_DEST_ETC/digest/key_admin
1243 richard 796
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 797
</Directory>
344 richard 798
<Directory $DIR_ACC/manager>
1 root 799
	SSLRequireSSL
800
	AllowOverride None
801
	Order deny,allow
802
	Deny from all
803
	Allow from 127.0.0.1
804
	Allow from $PRIVATE_NETWORK_MASK
805
	require valid-user
806
	AuthType digest
1748 richard 807
	AuthName "ALCASAR Control Center (ACC)" 
1747 richard 808
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 809
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 810
	AuthUserFile $DIR_DEST_ETC/digest/key_manager
1243 richard 811
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 812
</Directory>
316 richard 813
<Directory $DIR_ACC/backup>
814
	SSLRequireSSL
815
	AllowOverride None
816
	Order deny,allow
817
	Deny from all
818
	Allow from 127.0.0.1
819
	Allow from $PRIVATE_NETWORK_MASK
820
	require valid-user
821
	AuthType digest
1748 richard 822
	AuthName "ALCASAR Control Center (ACC)" 
1747 richard 823
	AuthDigestDomain $HOSTNAME.$DOMAIN
316 richard 824
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 825
	AuthUserFile $DIR_DEST_ETC/digest/key_backup
1243 richard 826
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
316 richard 827
</Directory>
811 richard 828
Alias /save/ "$DIR_SAVE/"
829
<Directory $DIR_SAVE>
830
	SSLRequireSSL
831
	Options Indexes
832
	Order deny,allow
833
	Deny from all
834
	Allow from 127.0.0.1
835
	Allow from $PRIVATE_NETWORK_MASK
836
	require valid-user
837
	AuthType digest
1748 richard 838
	AuthName "ALCASAR Control Center (ACC)" 
1747 richard 839
	AuthDigestDomain $HOSTNAME.$DOMAIN
811 richard 840
	AuthUserFile $DIR_DEST_ETC/digest/key_backup
1243 richard 841
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
811 richard 842
</Directory>
1833 richard 843
<Directory $DIR_WEB/pass>
844
	SSLRequireSSL
845
	AllowOverride None
846
	Order deny,allow
847
	Deny from all
848
	Allow from 127.0.0.1
849
	Allow from $PRIVATE_NETWORK_MASK
850
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN
851
</Directory>
1 root 852
EOF
1833 richard 853
# Launch after coova (in order to wait tun0 to be up)
1378 richard 854
$SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/httpd.service
1389 richard 855
} # End of ACC ()
1 root 856
 
1893 richard 857
##########################################################################
858
##				Fonction "CA"				##
1898 richard 859
## - Creating the CA and the server certificate (apache)	 	##
1893 richard 860
##########################################################################
1221 richard 861
CA ()
1 root 862
{
510 richard 863
	$DIR_DEST_BIN/alcasar-CA.sh
800 richard 864
	FIC_VIRTUAL_SSL=`find /etc/httpd/conf -type f -name *default_ssl_vhost.conf`
303 richard 865
	[ -e /etc/httpd/conf/vhosts-ssl.default ]  || cp $FIC_VIRTUAL_SSL /etc/httpd/conf/vhosts-ssl.default
1410 richard 866
	cat <<EOF > $FIC_VIRTUAL_SSL
867
# default SSL virtual host, used for all HTTPS requests that do not
868
# match a ServerName or ServerAlias in any <VirtualHost> block.
869
 
870
<VirtualHost _default_:443>
871
# general configuration
872
    ServerAdmin root@localhost
1748 richard 873
    ServerName $HOSTNAME.$DOMAIN
1410 richard 874
 
875
# SSL configuration
876
    SSLEngine on
877
    SSLCertificateFile /etc/pki/tls/certs/alcasar.crt
878
    SSLCertificateKeyFile /etc/pki/tls/private/alcasar.key
879
    SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
880
    CustomLog logs/ssl_request_log \
881
	"%t %{SSL_PROTOCOL}x %{SSL_CIPHER}x [%h] \"%r\" %b"
882
    ErrorLog logs/ssl_error_log
883
    ErrorLogFormat "[%t] [%m:%l] [client %a] %M"
884
</VirtualHost>
885
EOF
5 franck 886
	chown -R root:apache /etc/pki
1 root 887
	chmod -R 750 /etc/pki
1389 richard 888
} # End of CA ()
1 root 889
 
1837 richard 890
##################################################################
891
##			Function "time_server"			##
892
## - Configuring NTP server					##
893
##################################################################
894
time_server ()
895
{
896
# Set the Internet time server
897
	[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
898
	cat <<EOF > /etc/ntp/step-tickers
899
0.fr.pool.ntp.org	# adapt to your country
900
1.fr.pool.ntp.org
901
2.fr.pool.ntp.org
902
EOF
903
	[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
904
	cat <<EOF > /etc/ntp.conf
905
server 0.fr.pool.ntp.org	# adapt to your country
906
server 1.fr.pool.ntp.org
907
server 2.fr.pool.ntp.org
908
server 127.127.1.0   		# local clock si NTP internet indisponible ...
909
fudge 127.127.1.0 stratum 10
910
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
911
restrict 127.0.0.1
912
driftfile /var/lib/ntp/drift
913
logfile /var/log/ntp.log
914
disable monitor
915
EOF
916
	chown -R ntp:ntp /var/lib/ntp
917
# Synchronize now
918
	ntpd -q -g &
919
} # End of time_server ()
920
 
1 root 921
##########################################################################################
1221 richard 922
##			Fonction "init_db"						##
1 root 923
## - Initialisation de la base Mysql							##
924
## - Affectation du mot de passe de l'administrateur (root)				##
925
## - Suppression des bases et des utilisateurs superflus				##
926
## - Création de la base 'radius'							##
927
## - Installation du schéma de cette base						##
928
## - Import des tables de comptabilité (mtotacct, totacct) et info_usagers (userinfo)	##
929
##       ces table proviennent de 'dialupadmin' (paquetage freeradius-web)		##
930
##########################################################################################
931
init_db ()
932
{
1355 richard 933
	rm -rf /var/lib/mysql # to be sure that there is no former installation
1 root 934
	[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
935
	$SED "s?^#bind-address.*?bind-address=127.0.0.1?g" /etc/my.cnf
1355 richard 936
	$SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
1574 richard 937
	/usr/bin/systemctl start mysqld.service
1 root 938
	sleep 4
939
	mysqladmin -u root password $mysqlpwd
940
	MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
1355 richard 941
# Secure the server
942
	$MYSQL="DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
943
	$MYSQL="CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;" 
615 richard 944
# Create 'radius' database
1317 richard 945
	$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
615 richard 946
# Add an empty radius database structure
1800 richard 947
	mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
615 richard 948
# modify the start script in order to close accounting connexion when the system is comming down or up
1357 richard 949
	[ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
1828 richard 950
	$SED "/ExecStartPost=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
951
	$SED "/ExecStartPost=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
1574 richard 952
	/usr/bin/systemctl daemon-reload
1389 richard 953
} # End of init_db ()
1 root 954
 
955
##########################################################################
1389 richard 956
##			Fonction "radius"				##
1 root 957
## - Paramètrage des fichiers de configuration FreeRadius		##
958
## - Affectation du secret partagé entre coova-chilli et freeradius	##
959
## - Modification de fichier de conf pour l'accès à Mysql		##
960
##########################################################################
1389 richard 961
radius ()
1 root 962
{
1800 richard 963
	cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
1 root 964
	chown -R radius:radius /etc/raddb
965
	[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
1278 richard 966
# Set radius.conf parameters
1 root 967
	$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
968
	$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
969
	$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
1278 richard 970
# remove the proxy function
1 root 971
	$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf
972
	$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf
1278 richard 973
# remove EAP module
654 richard 974
	$SED "s?^[\t ]*\$INCLUDE eap.conf.*?#\$INCLUDE eap.conf?g" /etc/raddb/radiusd.conf
1278 richard 975
# listen on loopback (should be modified later if EAP enabled)
1 root 976
	$SED "s?^[\t ]*ipaddr =.*?ipaddr = 127.0.0.1?g" /etc/raddb/radiusd.conf
1278 richard 977
# enable the  SQL module (and SQL counter)
1 root 978
	$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql.conf.*?\$INCLUDE sql.conf?g" /etc/raddb/radiusd.conf
979
	$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql/mysql/counter.conf?\$INCLUDE sql/mysql/counter.conf?g" /etc/raddb/radiusd.conf
980
	$SED "s?^[\t ]*\$INCLUDE policy.conf?#\$INCLUDE policy.conf?g" /etc/raddb/radiusd.conf
1465 richard 981
# only include modules for ALCASAR needs
982
	$SED "s?^[\t ]*\$INCLUDE \${confdir}/modules/.*?\t#\$INCLUDE \${confdir}/modules/\n\t# we only include modules for ALCASAR needs\n\t\$INCLUDE \${confdir}/modules/attr_filter\n\t\$INCLUDE \${confdir}/modules/expiration\n\t\$INCLUDE \${confdir}/modules/logintime\n\t\$INCLUDE \${confdir}/modules/ldap\n\t\$INCLUDE \${confdir}/modules/pap?g" /etc/raddb/radiusd.conf
983
	$SED "s/^[\t ]exec$/\#\texec/g" /etc/raddb/radiusd.conf
984
	$SED "s?^[\t ]*expr.*?\#\texpr?g" /etc/raddb/radiusd.conf
985
	$SED "s?^[\t ]*\#	daily.*?\#\tdaily\n\tsql?g" /etc/raddb/radiusd.conf
986
	$SED "s?^[\t ]*logintime.*?\tlogintime\n\tnoresetcounter\n\tdailycounter\n\tmonthlycounter\n\tattr_filter.access_reject\n\tattr_filter.accounting_response\n\tpap?g" /etc/raddb/radiusd.conf
987
	$SED "s?^[\t ]*\$INCLUDE sites-enabled/.*?\#\$INCLUDE sites-enabled/\n\#\tenable only alcasar virtual server\n\$INCLUDE sites-enabled/alcasar?g" /etc/raddb/radiusd.conf
1278 richard 988
# remvove virtual server and copy our conf file
1 root 989
	rm -f /etc/raddb/sites-enabled/*
1278 richard 990
       	cp $DIR_CONF/radius/alcasar-radius /etc/raddb/sites-available/alcasar
1 root 991
	chown radius:apache /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap # droits rw pour apache (module ldap)
992
	chmod 660 /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap
993
	chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/modules
994
	ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
384 richard 995
# Inutile dans notre fonctionnement mais les liens sont recréés par un update de radius ... donc forcé en tant que fichier à 'vide'
1 root 996
	touch /etc/raddb/sites-enabled/{inner-tunnel,control-socket,default}
1278 richard 997
# client.conf configuration (127.0.0.1 suffit mais on laisse le deuxième client pour la future gestion de l'EAP)
1 root 998
	[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
999
	cat << EOF > /etc/raddb/clients.conf
1000
client 127.0.0.1 {
1001
	secret = $secretradius
1002
	shortname = localhost
1003
}
1004
EOF
1278 richard 1005
# sql.conf modification
1 root 1006
	[ -e /etc/raddb/sql.conf.default ] || cp /etc/raddb/sql.conf /etc/raddb/sql.conf.default
1007
	$SED "s?^[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/sql.conf
1008
	$SED "s?^[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/sql.conf
1009
	$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/sql.conf
1010
	$SED "s?^[\t ]*sqltrace =.*?sqltrace = no?g" /etc/raddb/sql.conf
1278 richard 1011
# dialup.conf modification (case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.) 
1 root 1012
	[ -e /etc/raddb/sql/mysql/dialup.conf.default ] || cp /etc/raddb/sql/mysql/dialup.conf /etc/raddb/sql/mysql/dialup.conf.default
1278 richard 1013
	cp -f $DIR_CONF/radius/dialup.conf /etc/raddb/sql/mysql/dialup.conf
1014
# counter.conf modification (change the Max-All-Session-Time counter)
1015
	[ -e /etc/raddb/sql/mysql/counter.conf.default ] || cp /etc/raddb/sql/mysql/counter.conf /etc/raddb/sql/mysql/counter.conf.default
1016
	cp -f $DIR_CONF/radius/counter.conf /etc/raddb/sql/mysql/counter.conf
1017
	chown -R radius:radius /etc/raddb/sql/mysql/*
1358 richard 1018
# make certain that mysql is up before radius start
1019
	[ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
1020
	$SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
1574 richard 1021
	/usr/bin/systemctl daemon-reload
1389 richard 1022
} # End radius ()
1 root 1023
 
799 richard 1024
##################################################################################
1389 richard 1025
##			Fonction "chilli"					##
799 richard 1026
## - Création du fichier d'initialisation et de configuration de coova-chilli	##
1027
## - Paramètrage de la page d'authentification (intercept.php)			##
1028
##################################################################################
1389 richard 1029
chilli ()
1 root 1030
{
1370 richard 1031
# chilli unit for systemd
1032
cat << EOF > /lib/systemd/system/chilli.service
1372 richard 1033
#  This file is part of systemd.
1034
#
1035
#  systemd is free software; you can redistribute it and/or modify it
1036
#  under the terms of the GNU General Public License as published by
1037
#  the Free Software Foundation; either version 2 of the License, or
1038
#  (at your option) any later version.
1370 richard 1039
[Unit]
1040
Description=chilli is a captive portal daemon
1041
After=network.target
1042
 
1043
[Service]
1379 richard 1044
Type=forking
1370 richard 1045
ExecStart=/usr/libexec/chilli start
1046
ExecStop=/usr/libexec/chilli stop
1047
ExecReload=/usr/libexec/chilli reload
1048
PIDFile=/var/run/chilli.pid
1049
 
1050
[Install]
1051
WantedBy=multi-user.target
1052
EOF
799 richard 1053
# init file creation
1370 richard 1054
	[ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
1801 richard 1055
	cat <<EOF > /etc/init.d/chilli
799 richard 1056
#!/bin/sh
1057
#
1058
# chilli CoovaChilli init
1059
#
1060
# chkconfig: 2345 65 35
1061
# description: CoovaChilli
1062
### BEGIN INIT INFO
1063
# Provides:       chilli
1064
# Required-Start: network 
1065
# Should-Start: 
1066
# Required-Stop:  network
1067
# Should-Stop: 
1068
# Default-Start:  2 3 5
1069
# Default-Stop:
1070
# Description:    CoovaChilli access controller
1071
### END INIT INFO
1072
 
1073
[ -f /usr/sbin/chilli ] || exit 0
1074
. /etc/init.d/functions
1075
CONFIG=/etc/chilli.conf
1076
pidfile=/var/run/chilli.pid
1077
[ -f \$CONFIG ] || {
1078
    echo "\$CONFIG Not found"
1079
    exit 0
1080
}
1081
RETVAL=0
1082
prog="chilli"
1083
case \$1 in
1084
    start)
1085
	if [ -f \$pidfile ] ; then 
1086
		gprintf "chilli is already running"
1087
	else
1088
        	gprintf "Starting \$prog: "
1089
		rm -f /var/run/chilli* # cleaning
1828 richard 1090
        	/usr/sbin/modprobe tun >/dev/null 2>&1
799 richard 1091
        	echo 1 > /proc/sys/net/ipv4/ip_forward
1092
		[ -e /dev/net/tun ] || {
1093
	    	(cd /dev; 
1094
			mkdir net; 
1095
			cd net; 
1096
			mknod tun c 10 200)
1097
		}
1336 richard 1098
		ifconfig $INTIF 0.0.0.0
1576 richard 1099
		/usr/sbin/ethtool -K $INTIF gro off
799 richard 1100
		daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
1101
        	RETVAL=$?
1102
	fi
1103
	;;
1104
 
1105
    reload)
1106
	killall -HUP chilli
1107
	;;
1108
 
1109
    restart)
1110
	\$0 stop
1111
        sleep 2
1112
	\$0 start
1113
	;;
1114
 
1115
    status)
1116
        status chilli
1117
        RETVAL=0
1118
        ;;
1119
 
1120
    stop)
1121
	if [ -f \$pidfile ] ; then  
1122
        	gprintf "Shutting down \$prog: "
1123
		killproc /usr/sbin/chilli
1124
		RETVAL=\$?
1125
		[ \$RETVAL = 0 ] && rm -f $pidfile
1126
	else	
1127
        	gprintf "chilli is not running"
1128
	fi
1129
	;;
1130
 
1131
    *)
1132
        echo "Usage: \$0 {start|stop|restart|reload|status}"
1133
        exit 1
1134
esac
1135
echo
1136
EOF
1801 richard 1137
chmod a+x /etc/init.d/chilli
1138
ln -s /etc/init.d/chilli /usr/libexec/chilli
799 richard 1139
# conf file creation
346 richard 1140
	[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
1141
	cat <<EOF > /etc/chilli.conf
1142
# coova config for ALCASAR
1143
cmdsocket	/var/run/chilli.sock
1336 richard 1144
unixipc		chilli.$INTIF.ipc
1551 richard 1145
pidfile		/var/run/chilli.pid
346 richard 1146
net		$PRIVATE_NETWORK_MASK
595 richard 1147
dhcpif		$INTIF
841 richard 1148
ethers		$DIR_DEST_ETC/alcasar-ethers
861 richard 1149
#nodynip
865 richard 1150
#statip
1151
dynip		$PRIVATE_NETWORK_MASK
1249 richard 1152
domain		$DOMAIN
355 richard 1153
dns1		$PRIVATE_IP
1154
dns2		$PRIVATE_IP
346 richard 1155
uamlisten	$PRIVATE_IP
503 richard 1156
uamport		3990
837 richard 1157
macauth
1158
macpasswd	password
1697 richard 1159
strictmacauth
1243 richard 1160
locationname	$HOSTNAME.$DOMAIN
346 richard 1161
radiusserver1	127.0.0.1
1162
radiusserver2	127.0.0.1
1163
radiussecret	$secretradius
1164
radiusauthport	1812
1165
radiusacctport	1813
1243 richard 1166
uamserver	https://$HOSTNAME.$DOMAIN/intercept.php
1167
radiusnasid	$HOSTNAME.$DOMAIN
346 richard 1168
uamsecret	$secretuam
1249 richard 1169
uamallowed	$HOSTNAME,$HOSTNAME.$DOMAIN
346 richard 1170
coaport		3799
1379 richard 1171
conup		$DIR_DEST_BIN/alcasar-conup.sh
1172
condown		$DIR_DEST_BIN/alcasar-condown.sh
503 richard 1173
include		$DIR_DEST_ETC/alcasar-uamallowed
1174
include		$DIR_DEST_ETC/alcasar-uamdomain
1613 franck 1175
#dhcpgateway		none
1176
#dhcprelayagent		none
1610 franck 1177
#dhcpgatewayport	none
346 richard 1178
EOF
1336 richard 1179
# create file for DHCP static ip. Reserve the second IP address for INTIF (the first one is for tun0)
977 richard 1180
	echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
840 richard 1181
# create files for trusted domains and urls
1148 crox53 1182
	touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
503 richard 1183
	chown root:apache $DIR_DEST_ETC/alcasar-*
1184
	chmod 660 $DIR_DEST_ETC/alcasar-*
847 richard 1185
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
526 stephane 1186
	$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
1187
	$SED "s?^\$userpassword=1.*?\$userpassword=1;?g" $DIR_WEB/intercept.php
796 richard 1188
# user 'chilli' creation (in order to run conup/off and up/down scripts
1189
	chilli_exist=`grep chilli /etc/passwd|wc -l`
1190
	if [ "$chilli_exist" == "1" ]
1191
	then
1192
	      userdel -r chilli 2>/dev/null
1193
	fi
1194
	groupadd -f chilli
1195
	useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
1389 richard 1196
}  # End of chilli ()
1349 richard 1197
 
1 root 1198
##################################################################
1389 richard 1199
##		Fonction "dansguardian"				##
1 root 1200
## - Paramètrage du gestionnaire de contenu Dansguardian	##
1201
##################################################################
1389 richard 1202
dansguardian ()
1 root 1203
{
1841 richard 1204
	mkdir -p /var/dansguardian /var/log/dansguardian
1205
	chown -R dansguardian /var/dansguardian /var/log/dansguardian
1375 richard 1206
	$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dansguardian -c /etc/dansguardian/dansguardian.conf?g" /lib/systemd/system/dansguardian.service
1391 richard 1207
	$SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/dansguardian.service
497 richard 1208
	[ -e $DIR_DG/dansguardian.conf.default ] || cp $DIR_DG/dansguardian.conf $DIR_DG/dansguardian.conf.default
1293 richard 1209
# By default the filter is off 
1556 richard 1210
	$SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/dansguardian.conf
1293 richard 1211
# French deny HTML page
497 richard 1212
	$SED "s?^language =.*?language = french?g" $DIR_DG/dansguardian.conf
1293 richard 1213
# Listen only on LAN side
497 richard 1214
	$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/dansguardian.conf
1342 richard 1215
# DG send its flow to HAVP
1216
	$SED "s?^proxyport.*?proxyport = 8090?g" $DIR_DG/dansguardian.conf
1293 richard 1217
# replace the default deny HTML page
1 root 1218
	cp -f $DIR_CONF/template.html /usr/share/dansguardian/languages/ukenglish/
1219
	cp -f $DIR_CONF/template-fr.html /usr/share/dansguardian/languages/french/template.html
1293 richard 1220
# Don't log
1221
	$SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/dansguardian.conf
1 root 1222
# on désactive par défaut le controle de contenu des pages html
497 richard 1223
	$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/dansguardian.conf
1224
	cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
1225
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
1 root 1226
# on désactive par défaut le contrôle d'URL par expressions régulières
497 richard 1227
	cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
1228
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
1721 richard 1229
 
1230
# Configure Dansguardian for large site
1231
# Minimum number of processus to handle connections
1232
	$SED "s?^minchildren =.*?minchildren = 15?g" $DIR_DG/dansguardian.conf
1233
# Maximum number of processus to handle connections
1234
	$SED "s?^maxchildren =.*?maxchildren = 200?g" $DIR_DG/dansguardian.conf
1235
# Run at least 8 daemons
1236
	$SED "s?^minsparechildren =.*?minsparechildren = 8?g" $DIR_DG/dansguardian.conf
1237
# minimum number of processes to spawn
1238
	$SED "s?^preforkchildren =.*?preforkchildren = 10?g" $DIR_DG/dansguardian.conf
1239
# maximum age of a child process before it croaks it
1240
	$SED "s?^maxagechildren =.*?maxagechildren = 1000?g" $DIR_DG/dansguardian.conf
1241
 
1 root 1242
# on désactive par défaut le contrôle de téléchargement de fichiers
497 richard 1243
	[ -e $DIR_DG/dansguardianf1.conf.default ] || cp $DIR_DG/dansguardianf1.conf $DIR_DG/dansguardianf1.conf.default
1244
	$SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/dansguardianf1.conf
1245
	[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
1246
	[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
1247
	touch $DIR_DG/lists/bannedextensionlist
1248
	touch $DIR_DG/lists/bannedmimetypelist
1249
# 'Safesearch' regex actualisation
498 richard 1250
	$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
497 richard 1251
# empty LAN IP list that won't be WEB filtered
1252
	[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
1253
	touch $DIR_DG/lists/exceptioniplist
1254
# Keep a copy of URL & domain filter configuration files
1255
	[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
1256
	[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
1389 richard 1257
} # End of dansguardian ()
1 root 1258
 
71 richard 1259
##################################################################
1221 richard 1260
##			Fonction "antivirus"			##
1357 richard 1261
## - configuration of havp, libclamav and freshclam		##
71 richard 1262
##################################################################
1263
antivirus ()		
1264
{
1358 richard 1265
# create 'havp' user
288 richard 1266
	havp_exist=`grep havp /etc/passwd|wc -l`
307 richard 1267
	if [ "$havp_exist" == "1" ]
288 richard 1268
	then
478 richard 1269
	      userdel -r havp 2>/dev/null
894 richard 1270
	      groupdel havp 2>/dev/null
288 richard 1271
	fi
307 richard 1272
	groupadd -f havp
1486 richard 1273
	useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
1841 richard 1274
	mkdir -p /var/tmp/havp /var/log/havp /var/run/havp /var/log/clamav /var/lib/clamav
1484 richard 1275
	chown -R havp:havp /var/tmp/havp /var/log/havp /var/run/havp
1841 richard 1276
	chown -R clamav:clamav /var/log/clamav /var/lib/clamav
109 richard 1277
	[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
1278
	$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
1484 richard 1279
	$SED "s?^# PIDFILE.*?PIDFILE /var/run/havp/havp.pid?g" /etc/havp/havp.config	# pidfile
1280
	$SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config		# transparent mode
631 richard 1281
	$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config	# we listen only on loopback
1485 richard 1282
	$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config				# datas come on port 8090 (on loopback)
990 franck 1283
	$SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config	# Log format
631 richard 1284
	$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config		# active libclamav AV
1285
	$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config			# log only when malware matches
659 richard 1286
	$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config		# 10 daemons are started simultaneously
835 richard 1287
	$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config		# doesn't scan image files
1288
	$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
1007 richard 1289
# skip checking of youtube flow (too heavy load / risk too low)
1290
	[ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
1291
	echo "# Whitelist youtube flow" >> /etc/havp/whitelist
1292
	echo "*.youtube.com/*" >> /etc/havp/whitelist
1544 richard 1293
# adapt init script and systemd unit
335 richard 1294
	[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
481 franck 1295
	cp -f $DIR_CONF/havp-init /etc/init.d/havp
1547 richard 1296
	[ -e /lib/systemd/system/havp.service.default ] || cp /lib/systemd/system/havp.service /lib/systemd/system/havp.service.default
1297
	$SED "/^PIDFile/i ExecStartPre=/bin/mkdir -p /var/run/havp" /lib/systemd/system/havp.service
1544 richard 1298
	$SED "/^PIDFile/i ExecStartPre=/bin/chown -R havp:havp /var/run/havp /var/log/havp" /lib/systemd/system/havp.service
1358 richard 1299
# replace of the intercept page (template)
340 richard 1300
	cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
1301
	cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
1358 richard 1302
# update virus database every 4 hours (24h/6)
1357 richard 1303
	[ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
1304
	$SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
489 richard 1305
	$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
1357 richard 1306
	$SED "/^DatabaseMirror/i DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
1358 richard 1307
	$SED "/^DatabaseMirror db.fr.clamav.net/i DatabaseMirror switch.clamav.net" /etc/freshclam.conf
1308
	$SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
1385 richard 1309
# update now
1382 richard 1310
	/usr/bin/freshclam --no-warnings
1389 richard 1311
} # End of antivirus ()
71 richard 1312
 
1486 richard 1313
##########################################################################
1314
##			Fonction "tinyproxy"				##
1315
## - configuration of tinyproxy (proxy between filterde users and havp)	##
1316
##########################################################################
1485 richard 1317
tinyproxy ()		
1318
{
1486 richard 1319
	tinyproxy_exist=`grep tinyproxy /etc/passwd|wc -l`
1320
	if [ "$tinyproxy_exist" == "1" ]
1321
	then
1322
	      userdel -r tinyproxy 2>/dev/null
1323
	      groupdel tinyproxy 2>/dev/null
1324
	fi
1325
	groupadd -f tinyproxy
1488 richard 1326
	useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
1668 richard 1327
	mkdir -p /var/run/tinyproxy /var/log/tinyproxy
1328
	chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
1486 richard 1329
	[ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
1330
	$SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
1331
	$SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
1332
	$SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf			# Listen Port
1333
	$SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf		# Listen NIC (only intif)
1508 richard 1334
	$SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
1518 richard 1335
	$SED "s?^#PidFile.*?PidFile \"/var/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
1486 richard 1336
	$SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf		# Only errors are logged
1337
	$SED "s?^#Upstream.*?Upstream 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf	# forward to HAVP
1338
	$SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf	# Stealth mode
1544 richard 1339
	$SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf	# Allow from LAN
1509 richard 1340
# Create the systemd unit
1341
cat << EOF > /lib/systemd/system/tinyproxy.service
1342
#  This file is part of systemd.
1343
#
1344
#  systemd is free software; you can redistribute it and/or modify it
1345
#  under the terms of the GNU General Public License as published by
1346
#  the Free Software Foundation; either version 2 of the License, or
1347
#  (at your option) any later version.
1485 richard 1348
 
1509 richard 1349
# This unit launches tinyproxy (a very light proxy).
1518 richard 1350
# The "sleep 2" is needed because the pid file isn't ready for systemd
1509 richard 1351
[Unit]
1352
Description=Tinyproxy Web Proxy Server
1353
After=network.target iptables.service
1354
 
1355
[Service]
1356
Type=forking
1518 richard 1357
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
1358
ExecStartPre=/bin/sleep 2
1359
PIDFile=/var/run/tinyproxy/tinyproxy.pid
1509 richard 1360
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf
1361
 
1362
[Install]
1363
WantedBy=multi-user.target
1364
EOF
1365
 
1485 richard 1366
} # end of tinyproxy
1 root 1367
##################################################################################
1389 richard 1368
##			function "ulogd"					##
476 richard 1369
## - Ulog config for multi-log files 						##
1370
##################################################################################
1389 richard 1371
ulogd ()
476 richard 1372
{
1373
# Three instances of ulogd (three different logfiles)
1374
	[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
478 richard 1375
	nl=1
1358 richard 1376
	for log_type in traceability ssh ext-access
478 richard 1377
	do
1365 richard 1378
		[ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
1369 richard 1379
		[ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
1375 richard 1380
		cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
1704 richard 1381
		$SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
1554 richard 1382
		if [ "$ARCH" == "i586" ]; then $SED "s/lib64/lib/g" /etc/ulogd-$log_type.conf; fi
478 richard 1383
		cat << EOF >> /etc/ulogd-$log_type.conf
1452 richard 1384
[emu1]
478 richard 1385
file="/var/log/firewall/$log_type.log"
1386
sync=1
1387
EOF
1452 richard 1388
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
478 richard 1389
		nl=`expr $nl + 1`
1390
	done
476 richard 1391
	chown -R root:apache /var/log/firewall
1392
	chmod 750 /var/log/firewall
1393
	chmod 640 /var/log/firewall/*
1389 richard 1394
}  # End of ulogd ()
476 richard 1395
 
1159 crox53 1396
 
1397
##########################################################
1389 richard 1398
##              Function "nfsen"			##
1567 richard 1399
## - install the nfsen grapher				##
1400
## - install the two plugins porttracker & surfmap	##
1159 crox53 1401
##########################################################
1389 richard 1402
nfsen()
1 root 1403
{
1569 richard 1404
	tar xzf ./conf/nfsen/nfsen-1.3.7.tar.gz -C /tmp/
1365 richard 1405
# Add PortTracker plugin
1534 richard 1406
	for i in /var/www/html/acc/manager/nfsen/plugins /var/log/netflow/porttracker /usr/share/nfsen/plugins
1395 richard 1407
	do
1536 richard 1408
	[ ! -d $i ] && mkdir -p $i && chown -R apache:apache $i
1395 richard 1409
	done
1569 richard 1410
	$SED "s?^my \$PORTSDBDIR =.*?my \$PORTSDBDIR = \"/var/log/netflow/porttracker\";?g" /tmp/nfsen-1.3.7/contrib/PortTracker/PortTracker.pm
1365 richard 1411
# use of our conf file and init unit
1569 richard 1412
	cp $DIR_CONF/nfsen/nfsen.conf /tmp/nfsen-1.3.7/etc/
1570 richard 1413
# Installation of nfsen (we change a little 'install.pl in order not to ask the user for the perl version)
1221 richard 1414
	DirTmp=$(pwd)
1569 richard 1415
	cd /tmp/nfsen-1.3.7/
1570 richard 1416
	/usr/bin/perl install.pl etc/nfsen.conf
1417
	/usr/bin/perl install.pl etc/nfsen.conf # to avoid a Perl mistake "Semaphore introuvable"
1365 richard 1418
# Create RRD DB for porttracker (only in it still doesn't exist)
1570 richard 1419
	cp contrib/PortTracker/PortTracker.pm /usr/share/nfsen/plugins/
1420
	cp contrib/PortTracker/PortTracker.php /var/www/html/acc/manager/nfsen/plugins/
1395 richard 1421
	if [ "$(ls -A "/var/log/netflow/porttracker" 2>&1)" = "" ]; then sudo -u apache nftrack -I -d /var/log/netflow/porttracker; else echo "RRD DB already exists"; fi
1422
	chmod -R 770 /var/log/netflow/porttracker
1372 richard 1423
# nfsen unit for systemd
1424
cat << EOF > /lib/systemd/system/nfsen.service
1425
#  This file is part of systemd.
1426
#
1427
#  systemd is free software; you can redistribute it and/or modify it
1428
#  under the terms of the GNU General Public License as published by
1429
#  the Free Software Foundation; either version 2 of the License, or
1430
#  (at your option) any later version.
1431
 
1432
# This unit launches nfsen (a Netflow grapher).
1433
[Unit]
1434
Description= NfSen init script
1435
After=network.target iptables.service
1436
 
1437
[Service]
1438
Type=oneshot
1439
RemainAfterExit=yes
1393 richard 1440
PIDFile=/var/run/nfsen/nfsen.pid
1441
ExecStartPre=/bin/mkdir -p /var/run/nfsen
1442
ExecStartPre=/bin/chown apache:apache /var/run/nfsen
1372 richard 1443
ExecStart=/usr/bin/nfsen start 
1444
ExecStop=/usr/bin/nfsen stop
1393 richard 1445
ExecReload=/usr/bin/nfsen restart
1372 richard 1446
TimeoutSec=0
1447
 
1448
[Install]
1449
WantedBy=multi-user.target
1450
EOF
1365 richard 1451
# Add the listen port to collect netflow packet (nfcapd)
1393 richard 1452
$SED "s?'\$ziparg $extensions.*?\$ziparg $extensions -b 127.0.0.1;'?g" /usr/libexec/NfSenRC.pm 
1365 richard 1453
# expire delay for the profile "live"
1574 richard 1454
	/usr/bin/systemctl start nfsen
1393 richard 1455
	/bin/nfsen -m live -e 62d 2>/dev/null
1397 richard 1456
# add SURFmap plugin
1509 richard 1457
	cp $DIR_CONF/nfsen/SURFmap_v3.3.1.tar.gz /tmp/
1512 richard 1458
	cp $DIR_CONF/nfsen/GeoLiteCity* /tmp/
1509 richard 1459
	tar xzf /tmp/SURFmap_v3.3.1.tar.gz -C /tmp/
1512 richard 1460
	cd /tmp/
1461
	/usr/bin/sh SURFmap/install.sh
1544 richard 1462
chown -R apache:apache /var/www/html/acc/manager/nfsen /usr/share/nfsen
1365 richard 1463
# clear the installation
1221 richard 1464
	cd $DirTmp
1509 richard 1465
	rm -rf /tmp/nfsen*
1466
	rm -rf /tmp/SURFmap*
1389 richard 1467
} # End of nfsen ()
1 root 1468
 
1390 richard 1469
##################################################
1541 richard 1470
##		Function "vnstat"		##
1471
## Initialization of Vnstat and vnstat phpFE    ##
1472
##################################################
1473
vnstat ()
1474
{
1475
	 [ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
1476
	 $SED "s?Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
1477
	 [ -e $DIR_ACC/manager/stats/config.php.default ] || cp $DIR_ACC/manager/stats/config.php $DIR_ACC/manager/stats/config.php.default
1478
	 $SED "s?\$iface_list =.*?\$iface_list = array('$EXTIF');?g" $DIR_ACC/manager/stats/config.php
1479
	/usr/bin/vnstat -u -i $EXTIF
1480
} # End of vnstat	
1481
##################################################
1389 richard 1482
##		Function "dnsmasq"		##
1390 richard 1483
##################################################
1389 richard 1484
dnsmasq ()
219 jeremy 1485
{
1486
	[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
1356 richard 1487
	[ -e /etc/sysconfig/dnsmasq.default ] || cp /etc/sysconfig/dnsmasq /etc/sysconfig/dnsmasq.default
1387 richard 1488
	$SED "s?^OPTION=.*?OPTION=-C /etc/dnsmasq.conf?g" /etc/sysconfig/dnsmasq # default conf file for the first dnsmasq instance
503 richard 1489
	[ -e /etc/dnsmasq.conf.default ] || cp /etc/dnsmasq.conf /etc/dnsmasq.conf.default
1472 richard 1490
# 1st dnsmasq listen on udp 53 ("dnsmasq - forward"). It's used as dhcp server only if "alcasar-bypass" is on.
503 richard 1491
	cat << EOF > /etc/dnsmasq.conf 
520 richard 1492
# Configuration file for "dnsmasq in forward mode"
1387 richard 1493
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
259 richard 1494
listen-address=$PRIVATE_IP
1390 richard 1495
pid-file=/var/run/dnsmasq.pid
259 richard 1496
listen-address=127.0.0.1
286 richard 1497
no-dhcp-interface=$INTIF
1387 richard 1498
no-dhcp-interface=tun0
1499
no-dhcp-interface=lo
259 richard 1500
bind-interfaces
1721 richard 1501
cache-size=2048
259 richard 1502
domain=$DOMAIN
1503
domain-needed
1504
expand-hosts
1505
bogus-priv
1506
filterwin2k
1507
server=$DNS1
1508
server=$DNS2
1387 richard 1509
# DHCP service is configured. It will be enabled in "bypass" mode
1610 franck 1510
#dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h
1511
#dhcp-option=option:router,$PRIVATE_IP
1512
#dhcp-option=option:ntp-server,$PRIVATE_IP
259 richard 1513
 
1387 richard 1514
# Exemple of static dhcp assignation : <@MAC>,<name>,<@IP>,<MASK>,<ttl bail>
420 franck 1515
#dhcp-host=11:22:33:44:55:66,ssic-test,192.168.182.20,255.255.255.0,45m
259 richard 1516
EOF
1356 richard 1517
# 2nd dnsmasq listen on udp 54 ("dnsmasq with blacklist")
1518
	cat << EOF > /etc/dnsmasq-blacklist.conf 
1390 richard 1519
# Configuration file for "dnsmasq with blacklist"
1873 richard 1520
# Add Toulouse University blacklist domains
1472 richard 1521
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1015 richard 1522
conf-dir=$DIR_DEST_SHARE/dnsmasq-bl-enabled
1390 richard 1523
pid-file=/var/run/dnsmasq-blacklist.pid
498 richard 1524
listen-address=$PRIVATE_IP
1525
port=54
1526
no-dhcp-interface=$INTIF
1387 richard 1527
no-dhcp-interface=tun0
1472 richard 1528
no-dhcp-interface=lo
498 richard 1529
bind-interfaces
1721 richard 1530
cache-size=2048
498 richard 1531
domain=$DOMAIN
1532
domain-needed
1533
expand-hosts
1534
bogus-priv
1535
filterwin2k
1536
server=$DNS1
1537
server=$DNS2
1538
EOF
1379 richard 1539
# 3rd dnsmasq listen on udp 55 ("dnsmasq with whitelist")
1357 richard 1540
	cat << EOF > /etc/dnsmasq-whitelist.conf 
1390 richard 1541
# Configuration file for "dnsmasq with whitelist"
1873 richard 1542
# ADD Toulouse university whitelist domains
1472 richard 1543
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1356 richard 1544
conf-dir=$DIR_DEST_SHARE/dnsmasq-wl-enabled
1472 richard 1545
pid-file=/var/run/dnsmasq-whitelist.pid
1356 richard 1546
listen-address=$PRIVATE_IP
1547
port=55
1548
no-dhcp-interface=$INTIF
1387 richard 1549
no-dhcp-interface=tun0
1472 richard 1550
no-dhcp-interface=lo
1356 richard 1551
bind-interfaces
1721 richard 1552
cache-size=1024
1356 richard 1553
domain=$DOMAIN
1554
domain-needed
1555
expand-hosts
1556
bogus-priv
1557
filterwin2k
1867 raphael.pi 1558
ipset=/#/wl_ip_allowed			# dynamicly add the resolv IP address in the Firewall rules
1472 richard 1559
address=/#/$PRIVATE_IP				# for Domain name without local resolution (WL)  
1356 richard 1560
EOF
1472 richard 1561
# 4th dnsmasq listen on udp 56 ("blackhole")
1562
	cat << EOF > /etc/dnsmasq-blackhole.conf 
1563
# Configuration file for "dnsmasq as a blackhole"
1564
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1565
address=/#/$PRIVATE_IP				# redirect all on ALCASAR IP address
1566
pid-file=/var/run/dnsmasq-blackhole.pid
1567
listen-address=$PRIVATE_IP
1568
port=56
1569
no-dhcp-interface=$INTIF
1570
no-dhcp-interface=tun0
1571
no-dhcp-interface=lo
1572
bind-interfaces
1573
cache-size=256
1574
domain=$DOMAIN
1575
domain-needed
1576
expand-hosts
1577
bogus-priv
1578
filterwin2k
1579
EOF
1580
 
1517 richard 1581
# the main instance should start after network and chilli (which create tun0)
1547 richard 1582
	[ -e /lib/systemd/system/dnsmasq.service.default ] || cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
1517 richard 1583
	$SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/dnsmasq.service
1474 richard 1584
# Create dnsmasq-blacklist, dnsmasq-whitelist and dnsmasq-blackhole unit
1585
	for list in blacklist whitelist blackhole
1586
	do
1587
		cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq-$list.service
1588
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-$list.conf?g" /lib/systemd/system/dnsmasq-$list.service
1589
		$SED "s?^PIDFile=.*?PIDFile=/var/run/dnsmasq-$list.pid?g" /lib/systemd/system/dnsmasq-$list.service
1590
	done
308 richard 1591
} # End dnsmasq
1592
 
1593
##########################################################
1221 richard 1594
##		Fonction "BL"				##
308 richard 1595
##########################################################
1596
BL ()
1597
{
1873 richard 1598
# copy and extract Toulouse university BL
648 richard 1599
	rm -rf $DIR_DG/lists/blacklists
1600
	tar zxf $DIR_CONF/blacklists.tar.gz --directory=$DIR_DG/lists/ > /dev/null 2>&1
1383 richard 1601
# creation of the OSSI BL and WL categories (domain name and url)
878 richard 1602
	mkdir $DIR_DG/lists/blacklists/ossi
1864 raphael.pi 1603
	touch $DIR_DG/lists/blacklists/ossi/domains
1604
	touch $DIR_DG/lists/blacklists/ossi/urls
1384 richard 1605
	chown -R dansguardian:apache $DIR_DG $DIR_DEST_SHARE
1606
	chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
1383 richard 1607
# creation of file for the rehabilited domains and urls
648 richard 1608
	[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
673 richard 1609
	[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
648 richard 1610
	touch $DIR_DG/lists/exceptionsitelist
1611
	touch $DIR_DG/lists/exceptionurllist
311 richard 1612
# On crée la configuration de base du filtrage de domaine et d'URL pour Dansguardian
648 richard 1613
	cat <<EOF > $DIR_DG/lists/bannedurllist
311 richard 1614
# Dansguardian filter config for ALCASAR
1615
EOF
648 richard 1616
	cat <<EOF > $DIR_DG/lists/bannedsitelist
311 richard 1617
# Dansguardian domain filter config for ALCASAR
1618
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
1619
#**
1620
# block all SSL and CONNECT tunnels
1621
**s
1622
# block all SSL and CONNECT tunnels specified only as an IP
1623
*ips
1624
# block all sites specified only by an IP
1625
*ip
1626
EOF
1852 raphael.pi 1627
# Add Bing to the safesearch url regext list (parental control)
878 richard 1628
	cat <<EOF >> $DIR_DG/lists/urlregexplist
1629
# Bing - add 'adlt=strict'
1630
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
1631
EOF
1000 richard 1632
# change the the google safesearch ("safe=strict" instead of "safe=vss")
1003 richard 1633
	$SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
1370 richard 1634
# adapt the BL to ALCASAR architecture. Enable the default categories
654 richard 1635
	if [ "$mode" != "update" ]; then
1828 richard 1636
		$DIR_DEST_BIN/alcasar-bl.sh --adapt
1637
		$DIR_DEST_BIN/alcasar-bl.sh --cat_choice
1899 raphael.pi 1638
		mv $DIR_CONF/ossi-tor_node.txt  $DIR_DEST_SHARE/iptables-bl-enabled/
1639
		chown dansguardian:apache $DIR_DEST_SHARE/iptables-bl-enabled/ossi-tor_node.txt
654 richard 1640
	fi
308 richard 1641
}
219 jeremy 1642
 
1 root 1643
##########################################################
1221 richard 1644
##		Fonction "cron"				##
1 root 1645
## - Mise en place des différents fichiers de cron	##
1646
##########################################################
1647
cron ()
1648
{
1649
# Modif du fichier 'crontab' pour passer les cron à minuit au lieu de 04h00
1650
	[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
1651
	cat <<EOF > /etc/crontab
1828 richard 1652
SHELL=/usr/bin/bash
1653
PATH=/usr/sbin:/usr/bin
1 root 1654
MAILTO=root
1655
HOME=/
1656
 
1657
# run-parts
1658
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
1659
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
1660
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
1661
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
1662
EOF
1663
	[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
1664
	cat <<EOF >> /etc/anacrontab
667 franck 1665
7       8       cron.MysqlDump          nice /etc/cron.d/alcasar-mysql
1380 richard 1666
7       10      cron.logExport          nice /etc/cron.d/alcasar-archive
667 franck 1667
7	20	cron.importClean	nice /etc/cron.d/alcasar-clean_import
1 root 1668
EOF
1247 crox53 1669
 
811 richard 1670
	cat <<EOF > /etc/cron.d/alcasar-mysql
868 richard 1671
# Contrôle, réparation et export de la base des usagers (tous les lundi à 4h45)
1828 richard 1672
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
905 franck 1673
# Nettoyage des utilisateurs dont la date d'expiration du compte est supérieure à 7 jours
1828 richard 1674
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
1 root 1675
EOF
952 franck 1676
	cat <<EOF > /etc/cron.d/alcasar-archive
1677
# Archive des logs et de la base de données (tous les lundi à 5h35)
1678
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
1679
EOF
1566 richard 1680
	cat << EOF > /etc/cron.d/alcasar-ticket-clean
1681
# suppression des fichiers de mots de passe (imports massifs par fichier) et des ticket PDF d'utilisateur
1682
30 * * * *  root $DIR_DEST_BIN/alcasar-ticket-clean.sh
168 franck 1683
EOF
722 franck 1684
	cat << EOF > /etc/cron.d/alcasar-distrib-updates
1685
# mise à jour automatique de la distribution tous les jours 3h30
762 franck 1686
30 3 * * *  root /usr/sbin/urpmi --auto-update --auto 2>&1
722 franck 1687
EOF
1159 crox53 1688
 
1808 richard 1689
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
1690
# 'alcasar-tot_stats' (everyday at 01h01 pm) : aggregating the daily connections of users (write in the table 'totacct')
1691
# 'alcasar-monthly_tot_stat' (everyday at 01h05 pm) : aggregating the monthly connections of users (write in table 'mtotacct')
1692
# 'alcasar-truncate_raddact' (every month, the first at 01h10 pm) : removing the log sessions of users older than 365 days
1693
# 'alcasar-clean_radacct' (every month, the first at 01h15 pm) : closing the sessions openned for more than 30 days
1 root 1694
	cat << EOF > /etc/cron.d/freeradius-web
1808 richard 1695
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
1696
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
1697
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
1698
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
1 root 1699
EOF
671 franck 1700
	cat << EOF > /etc/cron.d/alcasar-watchdog
713 franck 1701
# activation du "chien de garde" (watchdog) toutes les 3'
1 root 1702
*/3 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
1703
EOF
1808 richard 1704
# Enabling the watchdog every 18'
808 franck 1705
	cat << EOF > /etc/cron.d/alcasar-daemon-watchdog
1851 franck 1706
# activation du "chien de garde" (daemon-watchdog) à chaque redémarrage
1707
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
808 franck 1708
# activation du "chien de garde" (daemon-watchdog) toutes les 18'
1709
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
1710
EOF
1862 raphael.pi 1711
 
1874 raphael.pi 1712
# Enabling category update from rsync
1876 raphael.pi 1713
	cat << EOF > /etc/cron.d/alcasar-update_cat
1874 raphael.pi 1714
# activation de la mise a jour des categories. Si le fichier /usr/local/etc/update_cat.conf est vide. On ne met pas à jour.
1875 raphael.pi 1715
 
1874 raphael.pi 1716
EOF
1862 raphael.pi 1717
 
1877 raphael.pi 1718
chmod 644 /etc/cron.d/alcasar-update_cat
1867 raphael.pi 1719
 
1808 richard 1720
# removing the users crons
522 richard 1721
	rm -f /var/spool/cron/*
1 root 1722
} # End cron
1723
 
1724
##################################################################
1221 richard 1725
## 			Fonction "Fail2Ban"			##
1163 crox53 1726
##- Modification de la configuration de fail2ban		##
1727
##- Sécurisation DDOS, SSH-Brute-Force, Intercept.php ...	##
1728
##################################################################
1729
fail2ban()
1730
{
1191 crox53 1731
	$DIR_CONF/fail2ban.sh
1474 richard 1732
# Autorise la lecture seule 2 des 3 fichiers de log concernés, havp est traité dans le script d'init de havp
1192 crox53 1733
	[ -e /var/log/fail2ban.log ] || touch /var/log/fail2ban.log
1489 richard 1734
	[ -e /var/Save/security/watchdog.log ] || touch /var/Save/security/watchdog.log
1165 crox53 1735
	chmod 644 /var/log/fail2ban.log
1489 richard 1736
	chmod 644 /var/Save/security/watchdog.log
1418 richard 1737
	/usr/bin/touch /var/log/auth.log
1515 richard 1738
# fail2ban unit
1739
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
1740
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
1741
$SED '/Type=/a\PIDFile=/var/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
1418 richard 1742
$SED '/After=*/c After=syslog.target network.target httpd.service' /usr/lib/systemd/system/fail2ban.service
1163 crox53 1743
} #Fin de fail2ban_install()
1744
 
1745
##################################################################
1376 richard 1746
## 			Fonction "gammu_smsd"			##
1747
## - Creation de la base de donnée Gammu			##
1748
## - Creation du fichier de config: gammu_smsd_conf		##
1749
##								##
1750
##################################################################
1751
gammu_smsd()
1752
{
1753
# Create 'gammu' databse
1754
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
1755
	$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_GAMMU;GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES"
1756
# Add a gammu database structure
1800 richard 1757
	mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql
1376 richard 1758
 
1759
# config file for the daemon
1760
cat << EOF > /etc/gammu_smsd_conf
1761
[gammu]
1762
port = /dev/ttyUSB0
1763
connection = at115200
1764
 
1765
;########################################################
1766
 
1767
[smsd]
1768
 
1769
PIN = 1234
1770
 
1771
logfile = /var/log/gammu-smsd/gammu-smsd.log
1772
logformat = textall
1773
debuglevel = 0
1774
 
1775
service = sql
1776
driver = native_mysql
1777
user = $DB_USER
1778
password = $radiuspwd
1779
pc = localhost
1780
database = $DB_GAMMU
1781
 
1828 richard 1782
RunOnReceive = $DIR_DEST_BIN/alcasar-sms.sh --new_sms
1376 richard 1783
 
1784
StatusFrequency = 30
1380 richard 1785
;LoopSleep = 2
1376 richard 1786
 
1787
;ResetFrequency = 300
1788
;HardResetFrequency = 120
1789
 
1790
CheckSecurity = 1 
1791
CheckSignal = 1
1792
CheckBattery = 0
1793
EOF
1794
 
1795
chmod 755 /etc/gammu_smsd_conf
1796
 
1797
#Creation dossier de log Gammu-smsd
1382 richard 1798
[ -e /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
1376 richard 1799
chmod 755 /var/log/gammu-smsd
1800
 
1801
#Edition du script sql gammu <-> radius
1452 richard 1802
$SED "s/^u_db=\".*/u_db=\"$DB_USER\"/g" $DIR_DEST_BIN/alcasar-sms.sh
1803
$SED "s/^p_db=\".*/p_db=\"$radiuspwd\"/g" $DIR_DEST_BIN/alcasar-sms.sh
1376 richard 1804
 
1380 richard 1805
#Création de la règle udev pour les Huawei // idVendor: 12d1
1806
cat << EOF > /etc/udev/rules.d/66-huawei.rules
1828 richard 1807
KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
1380 richard 1808
EOF
1809
 
1376 richard 1810
} # END gammu_smsd()
1811
 
1812
##################################################################
1221 richard 1813
##			Fonction "post_install"			##
1 root 1814
## - Modification des bannières (locales et ssh) et des prompts ##
1815
## - Installation de la structure de chiffrement pour root	##
1816
## - Mise en place du sudoers et de la sécurité sur les fichiers##
1817
## - Mise en place du la rotation des logs			##
5 franck 1818
## - Configuration dans le cas d'une mise à jour		##
1 root 1819
##################################################################
1820
post_install()
1821
{
1822
# création de la bannière locale
1007 richard 1823
	[ -e /etc/mageia-release.default ]  || cp /etc/mageia-release /etc/mageia-release.default
1824
	cp -f $DIR_CONF/banner /etc/mageia-release
1825
	echo " V$VERSION" >> /etc/mageia-release
1 root 1826
# création de la bannière SSH
1007 richard 1827
	cp /etc/mageia-release /etc/ssh/alcasar-banner-ssh
5 franck 1828
	chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
1 root 1829
	[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
1830
	$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
1831
	$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
793 richard 1832
# postfix banner anonymisation
1833
	$SED "s?^smtpd_banner =.*?smtpd_banner = $myhostname ESMTP?g" /etc/postfix/main.cf
1841 richard 1834
	chown -R postfix:postfix /var/lib/postfix
604 richard 1835
# sshd écoute côté LAN et WAN
1548 richard 1836
	$SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
1696 franck 1837
# sshd autorise les connections root par certificat
1838
	$SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
1769 richard 1839
	# Put the default values in conf file
1839 richard 1840
	echo "SSH=on" >> $CONF_FILE
1631 richard 1841
	echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
628 richard 1842
	echo "LDAP=off" >> $CONF_FILE
786 richard 1843
	echo "LDAP_IP=0.0.0.0/0.0.0.0" >> $CONF_FILE
1078 franck 1844
	echo "MULTIWAN=off" >> $CONF_FILE
1845
	echo "FAILOVER=30" >> $CONF_FILE
1846
	echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
1336 richard 1847
	echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
1848
	echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
1 root 1849
# Coloration des prompts
1850
	[ -e /etc/bashrc.default ]  || cp /etc/bashrc /etc/bashrc.default
5 franck 1851
	cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
630 franck 1852
	$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
1 root 1853
# Droits d'exécution pour utilisateur apache et sysadmin
1854
	[ -e /etc/sudoers.default ]  || cp /etc/sudoers /etc/sudoers.default
5 franck 1855
	cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
629 richard 1856
	$SED "s?^Host_Alias.*?Host_Alias	LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost		#réseau de l'organisme?g" /etc/sudoers
1543 richard 1857
# Modify some logrotate files (gammu, ulogd)
1 root 1858
	cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
1859
	chmod 644 /etc/logrotate.d/*
714 franck 1860
# rectification sur versions précédentes de la compression des logs
706 franck 1861
	$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
1862
# actualisation des fichiers logs compressés
1342 richard 1863
	for dir in firewall dansguardian httpd
706 franck 1864
	do
714 franck 1865
	      find /var/log/$dir -type f -name *.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] -exec gzip {} \;
706 franck 1866
	done
1221 richard 1867
# create the alcasar-load_balancing unit
1868
	cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
1184 crox53 1869
#  This file is part of systemd.
1870
#
1871
#  systemd is free software; you can redistribute it and/or modify it
1872
#  under the terms of the GNU General Public License as published by
1873
#  the Free Software Foundation; either version 2 of the License, or
1874
#  (at your option) any later version.
1875
 
1876
# This unit lauches alcasar-load-balancing.sh script.
1877
[Unit]
1878
Description=alcasar-load_balancing.sh execution
1879
After=network.target iptables.service
1880
 
1881
[Service]
1882
Type=oneshot
1883
RemainAfterExit=yes
1828 richard 1884
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
1885
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
1184 crox53 1886
TimeoutSec=0
1887
SysVStartPriority=99
1888
 
1889
[Install]
1890
WantedBy=multi-user.target
1157 stephane 1891
EOF
1221 richard 1892
# processes launched at boot time (Systemctl)
1839 richard 1893
	for i in alcasar-load_balancing mysqld httpd ntpd iptables dnsmasq dnsmasq-blacklist dnsmasq-whitelist dnsmasq-blackhole radiusd nfsen dansguardian freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
1221 richard 1894
	do
1574 richard 1895
		/usr/bin/systemctl -q enable $i.service
1221 richard 1896
	done
1452 richard 1897
 
1898
# disable processes at boot time (Systemctl)
1899
	for i in ulogd
1900
	do
1574 richard 1901
		/usr/bin/systemctl -q disable $i.service
1452 richard 1902
	done
1903
 
1221 richard 1904
# Apply French Security Agency (ANSSI) rules
1362 richard 1905
# ignore ICMP broadcast (smurf attack)
1906
	echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
1907
# ignore ICMP errors bogus
1908
	echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
1909
# remove ICMP redirects responces
1910
	echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
1911
	echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
1912
# enable SYN Cookies (Syn flood attacks)
1913
	echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
1914
# enable kernel antispoofing
1915
	echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
1916
# ignore source routing
1917
	echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
1918
# set conntrack timer to 1h (3600s) instead of 5 weeks
1919
	echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
1157 stephane 1920
# disable log_martians (ALCASAR is often installed between two private network addresses) 
1363 richard 1921
	echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
1778 richard 1922
# disable iptables_helpers
1923
	echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
1788 richard 1924
# Switch to the router mode
1925
	echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
1362 richard 1926
# remove Magic SysReq Keys
1363 richard 1927
	[ -e /etc/sysctl.d/51-alt-sysrq.conf ] && rm /etc/sysctl.d/51-alt-sysrq.conf
1003 richard 1928
# switch to multi-users runlevel (instead of x11)
1221 richard 1929
	ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
1600 richard 1930
#	GRUB modifications (only one time)
1005 richard 1931
# limit wait time to 3s
1932
# create an alcasar entry instead of linux-nonfb
1933
# change display to 1024*768 (vga791)
1600 richard 1934
	grub_already_modified=`grep ALCASAR /boot/grub/menu.lst|wc -l`
1935
	if [ $grub_already_modified == 0 ]
1936
		then
1937
		$SED "s?^timeout.*?timeout 3?g" /boot/grub/menu.lst
1938
		$SED "s?^title linux?title ALCASAR?g" /boot/grub/menu.lst
1939
		$SED "/^kernel/s/splash quiet //" /boot/grub/menu.lst
1601 richard 1940
		$SED "/^kernel/s/$/ vga=791/" /boot/grub/menu.lst
1600 richard 1941
		$SED "/^kernel/s/BOOT_IMAGE=linux /BOOT_IMAGE=linux-nonfb /" /boot/grub/menu.lst
1942
		$SED "/^gfxmenu/d" /boot/grub/menu.lst
1943
	fi
1221 richard 1944
# Load and apply the previous conf file
1945
	if [ "$mode" = "update" ]
532 richard 1946
	then
1668 richard 1947
		$DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
1221 richard 1948
		$DIR_DEST_BIN/alcasar-conf.sh --load
1949
		PARENT_SCRIPT=`basename $0`
1950
		export PARENT_SCRIPT # to avoid stop&start process during the installation process
1951
		$DIR_DEST_BIN/alcasar-conf.sh --apply
1952
		$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
1953
		$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
532 richard 1954
	fi
1221 richard 1955
	rm -f /tmp/alcasar-conf*
1956
	chown -R root:apache $DIR_DEST_ETC/*
1957
	chmod -R 660 $DIR_DEST_ETC/*
1958
	chmod ug+x $DIR_DEST_ETC/digest
1 root 1959
	cd $DIR_INSTALL
5 franck 1960
	echo ""
1 root 1961
	echo "#############################################################################"
638 richard 1962
	if [ $Lang == "fr" ]
1963
		then
1964
		echo "#                        Fin d'installation d'ALCASAR                       #"
1965
		echo "#                                                                           #"
1966
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
1967
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
1968
		echo "#                                                                           #"
1969
		echo "#############################################################################"
1970
		echo
1971
		echo "- ALCASAR sera fonctionnel après redémarrage du système"
1972
		echo
1973
		echo "- Lisez attentivement la documentation d'exploitation"
1974
		echo
1975
		echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://alcasar"
1976
		echo
1977
		echo "                   Appuyez sur 'Entrée' pour continuer"
1978
	else	
1979
		echo "#                        Enf of ALCASAR install process                     #"
1980
		echo "#                                                                           #"
1981
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
1982
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
1983
		echo "#                                                                           #"
1984
		echo "#############################################################################"
1985
		echo
1986
		echo "- The system will be rebooted in order to operate ALCASAR"
1987
		echo
1988
		echo "- Read the exploitation documentation"
1989
		echo
1990
		echo "- The ALCASAR Control Center (ACC) is at http://alcasar"
1991
		echo
1992
		echo "                   Hit 'Enter' to continue"
1993
	fi
1782 franck 1994
	sleep 2
815 richard 1995
	if [ "$mode" != "update" ]
820 richard 1996
	then
815 richard 1997
		read a
1998
	fi
774 richard 1999
	clear
1 root 2000
	reboot
2001
} # End post_install ()
2002
 
2003
#################################
1005 richard 2004
#  	Main Install loop  	#
1 root 2005
#################################
832 richard 2006
dir_exec=`dirname "$0"`
2007
if [ $dir_exec != "." ]
2008
then
2009
	echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
2010
	echo "Launch this program from the ALCASAR archive directory"
2011
	exit 0
2012
fi
2013
VERSION=`cat $DIR_INSTALL/VERSION`
291 franck 2014
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
1 root 2015
nb_args=$#
2016
args=$1
2017
if [ $nb_args -eq 0 ]
2018
then
2019
	nb_args=1
2020
	args="-h"
2021
fi
1062 richard 2022
chmod -R u+x $DIR_SCRIPTS/*
1 root 2023
case $args in
2024
	-\? | -h* | --h*)
2025
		echo "$usage"
2026
		exit 0
2027
		;;
291 franck 2028
	-i | --install)
1538 richard 2029
		header_install
959 franck 2030
		license
1544 richard 2031
		header_install
29 richard 2032
		testing
595 richard 2033
# RPMs install
2034
		$DIR_SCRIPTS/alcasar-urpmi.sh
2035
		if [ "$?" != "0" ]
1 root 2036
		then
595 richard 2037
			exit 0
2038
		fi
1249 richard 2039
		if [ -e $CONF_FILE ]
595 richard 2040
		then
597 richard 2041
# Uninstall the running version
1828 richard 2042
			$DIR_SCRIPTS/alcasar-uninstall.sh
595 richard 2043
		fi
636 richard 2044
# Test if manual update	
1362 richard 2045
		if [ -e /tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
595 richard 2046
		then
636 richard 2047
			header_install
595 richard 2048
			if [ $Lang == "fr" ]
636 richard 2049
				then echo "Le fichier de configuration d'une ancienne version a été trouvé";
2050
				else echo "The configuration file of an old version has been found";
595 richard 2051
			fi
597 richard 2052
			response=0
2053
			PTN='^[oOnNyY]$'
2054
			until [[ $(expr $response : $PTN) -gt 0 ]]
2055
			do
2056
				if [ $Lang == "fr" ]
2057
					then echo -n "Voulez-vous l'utiliser (O/n)? ";
2058
					else echo -n "Do you want to use it (Y/n)?";
2059
				 fi
2060
				read response
2061
				if [ "$response" = "n" ] || [ "$response" = "N" ] 
2062
				then rm -f /tmp/alcasar-conf*
2063
				fi
2064
			done
2065
		fi
636 richard 2066
# Test if update
1057 richard 2067
		if [ -e /tmp/alcasar-conf* ] 
597 richard 2068
		then
2069
			if [ $Lang == "fr" ]
2070
				then echo "#### Installation avec mise à jour ####";
2071
				else echo "#### Installation with update     ####";
2072
			fi
636 richard 2073
# Extract the central configuration file
1057 richard 2074
			tar -xf /tmp/alcasar-conf* conf/etc/alcasar.conf 
637 richard 2075
			ORGANISME=`grep ORGANISM conf/etc/alcasar.conf|cut -d"=" -f2`
1010 richard 2076
			PREVIOUS_VERSION=`grep VERSION conf/etc/alcasar.conf|cut -d"=" -f2`
2077
			MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
2078
			MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2|cut -c1`
2079
			UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3`
5 franck 2080
			mode="update"
1 root 2081
		fi
1837 richard 2082
		for func in init network ACC CA time_server init_db radius chilli dansguardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq BL cron fail2ban gammu_smsd post_install
5 franck 2083
		do
2084
			$func
1362 richard 2085
# echo "*** 'debug' : end of function $func ***"; read a
14 richard 2086
		done
5 franck 2087
		;;
291 franck 2088
	-u | --uninstall)
1828 richard 2089
		if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
1 root 2090
		then
597 richard 2091
			if [ $Lang == "fr" ]
2092
				then echo "ALCASAR n'est pas installé!";
2093
				else echo "ALCASAR isn't installed!";
2094
			fi
1 root 2095
			exit 0
2096
		fi
5 franck 2097
		response=0
2098
		PTN='^[oOnN]$'
580 richard 2099
		until [[ $(expr $response : $PTN) -gt 0 ]]
5 franck 2100
		do
597 richard 2101
			if [ $Lang == "fr" ]
2102
				then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
854 richard 2103
				else echo -n "Do you want to create the running version configuration file (Y/n)? ";
597 richard 2104
			fi
5 franck 2105
			read response
2106
		done
1103 richard 2107
		if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
1 root 2108
		then
1103 richard 2109
			$DIR_SCRIPTS/alcasar-conf.sh --create
498 richard 2110
		else	
2111
			rm -f /tmp/alcasar-conf*
1 root 2112
		fi
597 richard 2113
# Uninstall the running version
1828 richard 2114
		$DIR_SCRIPTS/alcasar-uninstall.sh
1 root 2115
		;;
2116
	*)
2117
		echo "Argument inconnu :$1";
460 richard 2118
		echo "Unknown argument :$1";
1 root 2119
		echo "$usage"
2120
		exit 1
2121
		;;
2122
esac
10 franck 2123
# end of script
366 franck 2124