Subversion Repositories ALCASAR

######################################################################

#

#	As of 2.0.0, FreeRADIUS supports virtual hosts using the

#	"server" section, and configuration directives.

#

#	Virtual hosts should be put into the "sites-available"

#	directory.  Soft links should be created in the "sites-enabled"

#	directory to these files.  This is done in a normal installation.

#

#	$Id: alcasar-radius 764 2011-11-01 12:04:05Z stephane $

#

######################################################################

#

#	Read "man radiusd" before editing this file.  See the section

#	titled DEBUGGING.  It outlines a method where you can quickly

#	obtain the configuration you want, without running into

#	trouble.  See also "man unlang", which documents the format

#	of this file.

#

#	This configuration is designed to work in the widest possible

#	set of circumstances, with the widest possible number of

#	authentication methods.  This means that in general, you should

#	need to make very few changes to this file.

#

#	The best way to configure the server for your local system

#	is to CAREFULLY edit this file.  Most attempts to make large

#	edits to this file will BREAK THE SERVER.  Any edits should

#	be small, and tested by running the server with "radiusd -X".

#	Once the edits have been verified to work, save a copy of these

#	configuration files somewhere.  (e.g. as a "tar" file).  Then,

#	make more edits, and test, as above.

#

#	There are many "commented out" references to modules such

#	as ldap, sql, etc.  These references serve as place-holders.

#	If you need the functionality of that module, then configure

#	it in radiusd.conf, and un-comment the references to it in

#	this file.  In most cases, those small changes will result

#	in the server being able to connect to the DB, and to

#	authenticate users.

#

######################################################################

#

#	In 1.x, the "authorize", etc. sections were global in

#	radiusd.conf.  As of 2.0, they SHOULD be in a server section.

#

#	The server section with no virtual server name is the "default"

#	section.  It is used when no server name is specified.

#

#	We don't indent the rest of this file, because doing so

#	would make it harder to read.

#

#  Authorization. First preprocess (hints and huntgroups files),

#  then realms, and finally look in the "users" file.

#

#  The order of the realm modules will determine the order that

#  we try to find a matching realm.

#

#  Make *sure* that 'preprocess' comes before any realm if you

#  need to setup hints for the remote radius server

authorize {

	#

	#  The preprocess module takes care of sanitizing some bizarre

	#  attributes in the request, and turning them into attributes

	#  which are more standard.

	#

	#  It takes care of processing the 'raddb/hints' and the

	#  'raddb/huntgroups' files.

	#

	#  It also adds the %{Client-IP-Address} attribute to the request.

	preprocess

	#

	#  If you want to have a log of authentication requests,

	#  un-comment the following line, and the 'detail auth_log'

	#  section, above.

#	auth_log

	#

	#  The chap module will set 'Auth-Type := CHAP' if we are

	#  handling a CHAP request and Auth-Type has not already been set

#	chap

	#

	#  If the users are logging in with an MS-CHAP-Challenge

	#  attribute for authentication, the mschap module will find

	#  the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'

	#  to the request, which will cause the server to then use

	#  the mschap module for authentication.

#	mschap

	#

	#  If you have a Cisco SIP server authenticating against

	#  FreeRADIUS, uncomment the following line, and the 'digest'

	#  line in the 'authenticate' section.

#	digest

	#

	#  Look for IPASS style 'realm/', and if not found, look for

	#  '@realm', and decide whether or not to proxy, based on

	#  that.

#	IPASS

	#

	#  If you are using multiple kinds of realms, you probably

	#  want to set "ignore_null = yes" for all of them.

	#  Otherwise, when the first style of realm doesn't match,

	#  the other styles won't be checked.

	#

#	suffix

#	ntdomain

	#

	#  This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP

	#  authentication.

	#

	#  It also sets the EAP-Type attribute in the request

	#  attribute list to the EAP type from the packet.

	#

	#  As of 2.0, the EAP module returns "ok" in the authorize stage

	#  for TTLS and PEAP.  In 1.x, it never returned "ok" here, so

	#  this change is compatible with older configurations.

	#

	#  The example below uses module failover to avoid querying all

	#  of the following modules if the EAP module returns "ok".

	#  Therefore, your LDAP and/or SQL servers will not be queried

	#  for the many packets that go back and forth to set up TTLS

	#  or PEAP.  The load on those servers will therefore be reduced.

	#

#	eap {

#		ok = return

#	}

	#

	#  Pull crypt'd passwords from /etc/passwd or /etc/shadow,

	#  using the system API's to get the password.  If you want

	#  to read /etc/passwd or /etc/shadow directly, see the

	#  passwd module in radiusd.conf.

	#

#	unix

	#

	#  Read the 'users' file

#	files

	#

	#  Look in an SQL database.  The schema of the database

	#  is meant to mirror the "users" file.

	#

	#  See "Authorization Queries" in sql.conf

	sql

	noresetcounter

	dailycounter

	monthlycounter

	#

	#  If you are using /etc/smbpasswd, and are also doing

	#  mschap authentication, the un-comment this line, and

	#  configure the 'etc_smbpasswd' module, above.

#	etc_smbpasswd

	#

	#  The ldap module will set Auth-Type to LDAP if it has not

	#  already been set

#	ldap {

#		fail = 1

#	}

	#

	#  Enforce daily limits on time spent logged in.

#	daily

	#

	# Use the checkval module

#	checkval

	expiration

	logintime

	#

	#  If no other module has claimed responsibility for

	#  authentication, then try to use PAP.  This allows the

	#  other modules listed above to add a "known good" password

	#  to the request, and to do nothing else.  The PAP module

	#  will then see that password, and use it to do PAP

	#  authentication.

	#

	#  This module should be listed last, so that the other modules

	#  get a chance to set Auth-Type for themselves.

	#

#	pap

	#

	#  If "status_server = yes", then Status-Server messages are passed

	#  through the following section, and ONLY the following section.

	#  This permits you to do DB queries, for example.  If the modules

	#  listed here return "fail", then NO response is sent.

	#

#	Autz-Type Status-Server {

#

#	}

}

#  Authentication.

#

#

#  This section lists which modules are available for authentication.

#  Note that it does NOT mean 'try each module in order'.  It means

#  that a module from the 'authorize' section adds a configuration

#  attribute 'Auth-Type := FOO'.  That authentication type is then

#  used to pick the apropriate module from the list below.

#

#  In general, you SHOULD NOT set the Auth-Type attribute.  The server

#  will figure it out on its own, and will do the right thing.  The

#  most common side effect of erroneously setting the Auth-Type

#  attribute is that one authentication method will work, but the

#  others will not.

#

#  The common reasons to set the Auth-Type attribute by hand

#  is to either forcibly reject the user (Auth-Type := Reject),

#  or to or forcibly accept the user (Auth-Type := Accept).

#

#  Note that Auth-Type := Accept will NOT work with EAP.

#

#  Please do not put "unlang" configurations into the "authenticate"

#  section.  Put them in the "post-auth" section instead.  That's what

#  the post-auth section is for.

#

authenticate {

#	#

#	#  PAP authentication, when a back-end database listed

#	#  in the 'authorize' section supplies a password.  The

#	#  password can be clear-text, or encrypted.

#	Auth-Type PAP {

#		pap

#	}

#

#	#

#	#  Most people want CHAP authentication

#	#  A back-end database listed in the 'authorize' section

#	#  MUST supply a CLEAR TEXT password.  Encrypted passwords

#	#  won't work.

#	Auth-Type CHAP {

#		chap

#	}

#

#	#

#	#  MSCHAP authentication.

#	Auth-Type MS-CHAP {

#		mschap

#	}

#

#	#

#	#  If you have a Cisco SIP server authenticating against

#	#  FreeRADIUS, uncomment the following line, and the 'digest'

#	#  line in the 'authorize' section.

#	digest

#

#	#

#	#  Pluggable Authentication Modules.

#	pam

#

#	#

#	#  See 'man getpwent' for information on how the 'unix'

#	#  module checks the users password.  Note that packets

#	#  containing CHAP-Password attributes CANNOT be authenticated

#	#  against /etc/passwd!  See the FAQ for details.

#	#

#	unix

#

#	# Uncomment it if you want to use ldap for authentication

#	#

#	# Note that this means "check plain-text password against

#	# the ldap database", which means that EAP won't work,

#	# as it does not supply a plain-text password.

#	Auth-Type LDAP {

#		ldap

#	}

#

#	#

#	#  Allow EAP authentication.

#	eap

}

#

#  Pre-accounting.  Decide which accounting type to use.

#

preacct {

	preprocess

	#

	#  Ensure that we have a semi-unique identifier for every

	#  request, and many NAS boxes are broken.

#	acct_unique

	#

	#  Look for IPASS-style 'realm/', and if not found, look for

	#  '@realm', and decide whether or not to proxy, based on

	#  that.

	#

	#  Accounting requests are generally proxied to the same

	#  home server as authentication requests.

#	IPASS

#	suffix

#	ntdomain

	#

	#  Read the 'acct_users' file

#	files

}

#

#  Accounting.  Log the accounting data.

#

accounting {

	#

	#  Create a 'detail'ed log of the packets.

	#  Note that accounting requests which are proxied

	#  are also logged in the detail file.

#	detail

#	daily

	#  Update the wtmp file

	#

	#  If you don't use "radlast", you can delete this line.

#	unix

	#

	#  For Simultaneous-Use tracking.

	#

	#  Due to packet losses in the network, the data here

	#  may be incorrect.  There is little we can do about it.

#	radutmp

	sradutmp

	#  Return an address to the IP Pool when we see a stop record.

#	main_pool

	#

	#  Log traffic to an SQL database.

	#

	#  See "Accounting queries" in sql.conf

	sql

	#

	#  Instead of sending the query to the SQL server,

	#  write it into a log file.

	#

#	sql_log

	#  Cisco VoIP specific bulk accounting

#	pgsql-voip

	#  Filter attributes from the accounting response.

	attr_filter.accounting_response

	#

	#  See "Autz-Type Status-Server" for how this works.

	#

#	Acct-Type Status-Server {

#

#	}

}

#  Session database, used for checking Simultaneous-Use. Either the radutmp

#  or rlm_sql module can handle this.

#  The rlm_sql module is *much* faster

session {

#	radutmp

	#

	#  See "Simultaneous Use Checking Queries" in sql.conf

	sql

}

#  Post-Authentication

#  Once we KNOW that the user has been authenticated, there are

#  additional steps we can take.

post-auth {

	#  Get an address from the IP Pool.

#	main_pool

	#

	#  If you want to have a log of authentication replies,

	#  un-comment the following line, and the 'detail reply_log'

	#  section, above.

#	reply_log

	#

	#  After authenticating the user, do another SQL query.

	#

	#  See "Authentication Logging Queries" in sql.conf

#	sql

	#

	#  Instead of sending the query to the SQL server,

	#  write it into a log file.

	#

#	sql_log

	#

	#  Un-comment the following if you have set

	#  'edir_account_policy_check = yes' in the ldap module sub-section of

	#  the 'modules' section.

	#

#	ldap

#	exec

	#

	#  Access-Reject packets are sent through the REJECT sub-section of the

	#  post-auth section.

	#

	#  Add the ldap module name (or instance) if you have set

	#  'edir_account_policy_check = yes' in the ldap module configuration

	#

	Post-Auth-Type REJECT {

		attr_filter.access_reject

	}

}

#

#  When the server decides to proxy a request to a home server,

#  the proxied request is first passed through the pre-proxy

#  stage.  This stage can re-write the request, or decide to

#  cancel the proxy.

#

#  Only a few modules currently have this method.

#

pre-proxy {

#	attr_rewrite

	#  Uncomment the following line if you want to change attributes

	#  as defined in the preproxy_users file.

#	files

	#  Uncomment the following line if you want to filter requests

	#  sent to remote servers based on the rules defined in the

	#  'attrs.pre-proxy' file.

#	attr_filter.pre-proxy

	#  If you want to have a log of packets proxied to a home

	#  server, un-comment the following line, and the

	#  'detail pre_proxy_log' section, above.

#	pre_proxy_log

}

#

#  When the server receives a reply to a request it proxied

#  to a home server, the request may be massaged here, in the

#  post-proxy stage.

#

post-proxy {

	#  If you want to have a log of replies from a home server,

	#  un-comment the following line, and the 'detail post_proxy_log'

	#  section, above.

#	post_proxy_log

#	attr_rewrite

	#  Uncomment the following line if you want to filter replies from

	#  remote proxies based on the rules defined in the 'attrs' file.

#	attr_filter.post-proxy

	#

	#  If you are proxying LEAP, you MUST configure the EAP

	#  module, and you MUST list it here, in the post-proxy

	#  stage.

	#

	#  You MUST also use the 'nostrip' option in the 'realm'

	#  configuration.  Otherwise, the User-Name attribute

	#  in the proxied request will not match the user name

	#  hidden inside of the EAP packet, and the end server will

	#  reject the EAP request.

	#

#	eap

	#

	#  If the server tries to proxy a request and fails, then the

	#  request is processed through the modules in this section.

	#

	#  The main use of this section is to permit robust proxying

	#  of accounting packets.  The server can be configured to

	#  proxy accounting packets as part of normal processing.

	#  Then, if the home server goes down, accounting packets can

	#  be logged to a local "detail" file, for processing with

	#  radrelay.  When the home server comes back up, radrelay

	#  will read the detail file, and send the packets to the

	#  home server.

	#

	#  With this configuration, the server always responds to

	#  Accounting-Requests from the NAS, but only writes

	#  accounting packets to disk if the home server is down.

	#

#	Post-Proxy-Type Fail {

#			detail

#	}

}