| 0,0 → 1,86 |
|---|
| smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen |
| Home page is http://smartmontools.sourceforge.net/ |
| |
| === START OF INFORMATION SECTION === |
| Device Model: Hitachi HDS722020ALA330 |
| Serial Number: JK1121[rest of serial number redacted] |
| Firmware Version: JKAOA20N |
| User Capacity: 2,000,398,934,016 bytes |
| Device is: Not in smartctl database [for details use: -P showall] |
| ATA Version is: 8 |
| ATA Standard is: ATA-8-ACS revision 4 |
| Local Time is: Tue Dec 1 15:21:30 2009 CST |
| SMART support is: Available - device has SMART capability. |
| SMART support is: Enabled |
| |
| === START OF READ SMART DATA SECTION === |
| SMART overall-health self-assessment test result: PASSED |
| |
| General SMART Values: |
| Offline data collection status: (0x84) Offline data collection activity |
| was suspended by an interrupting command from host. |
| Auto Offline Data Collection: Enabled. |
| Self-test execution status: ( 0) The previous self-test routine completed |
| without error or no self-test has ever |
| been run. |
| Total time to complete Offline |
| data collection: (21742) seconds. |
| Offline data collection |
| capabilities: (0x5b) SMART execute Offline immediate. |
| Auto Offline data collection on/off support. |
| Suspend Offline collection upon new |
| command. |
| Offline surface scan supported. |
| Self-test supported. |
| No Conveyance Self-test supported. |
| Selective Self-test supported. |
| SMART capabilities: (0x0003) Saves SMART data before entering |
| power-saving mode. |
| Supports SMART auto save timer. |
| Error logging capability: (0x01) Error logging supported. |
| General Purpose Logging supported. |
| Short self-test routine |
| recommended polling time: ( 1) minutes. |
| Extended self-test routine |
| recommended polling time: ( 255) minutes. |
| SCT capabilities: (0x003d) SCT Status supported. |
| SCT Feature Control supported. |
| SCT Data Table supported. |
| |
| SMART Attributes Data Structure revision number: 16 |
| Vendor Specific SMART Attributes with Thresholds: |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
| 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 |
| 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 98 |
| 3 Spin_Up_Time 0x0007 123 123 024 Pre-fail Always - 587 (Average 584) |
| 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 16 |
| 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 |
| 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 |
| 8 Seek_Time_Performance 0x0005 114 114 020 Pre-fail Offline - 38 |
| 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 292 |
| 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16 |
| 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 16 |
| 194 Temperature_Celsius 0x0002 230 230 000 Old_age Always - 27 (Lifetime Min/Max 20/45) |
| 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 |
| 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 |
| 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 |
| 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 |
| |
| SMART Error Log Version: 0 |
| No Errors Logged |
| |
| SMART Self-test log structure revision number 1 |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] |
| |
| SMART Selective self-test log data structure revision number 1 |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 1 0 0 Not_testing |
| 2 0 0 Not_testing |
| 3 0 0 Not_testing |
| 4 0 0 Not_testing |
| 5 0 0 Not_testing |
| Selective self-test flags (0x0): |
| After scanning selected spans, do NOT read-scan remainder of disk. |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
| Property changes: |
|---|
| Added: svn:eol-style |
|---|
| +native |
|---|
| \ No newline at end of property |
|---|