| /web/acc/phpsysinfo/sample/ups/1-upscDell2700.txt |
|---|
| 0,0 → 1,74 |
| battery.capacity: 9.00 |
| battery.charge: 96 |
| battery.charge.low: 30 |
| battery.charge.restart: 0 |
| battery.energysave: no |
| battery.runtime: 4963 |
| battery.runtime.low: 180 |
| battery.type: PbAc |
| device.mfr: DELL |
| device.model: Dell UPS Rack/Tower 2700W HV - 230V |
| device.serial: |
| device.type: ups |
| driver.name: usbhid-ups |
| driver.parameter.pollfreq: 30 |
| driver.parameter.pollinterval: 2 |
| driver.parameter.port: auto |
| driver.version: 2.6.3 |
| driver.version.data: MGE HID 1.27 |
| driver.version.internal: 0.35 |
| input.frequency: 50.0 |
| input.frequency.nominal: 50 |
| input.transfer.boost.low: 210 |
| input.transfer.high: 286 |
| input.transfer.low: 160 |
| input.transfer.trim.high: 250 |
| input.voltage: 226.0 |
| input.voltage.nominal: 230 |
| outlet.1.autoswitch.charge.low: 0 |
| outlet.1.delay.shutdown: 2147483647 |
| outlet.1.delay.start: 0 |
| outlet.1.desc: PowerShare Outlet 1 |
| outlet.1.id: 1 |
| outlet.1.status: on |
| outlet.1.switchable: yes |
| outlet.2.autoswitch.charge.low: 0 |
| outlet.2.delay.shutdown: 2147483647 |
| outlet.2.delay.start: 1 |
| outlet.2.desc: PowerShare Outlet 2 |
| outlet.2.id: 2 |
| outlet.2.status: on |
| outlet.2.switchable: yes |
| outlet.desc: Main Outlet |
| outlet.id: 0 |
| outlet.switchable: no |
| output.current: 1.40 |
| output.frequency: 50.0 |
| output.frequency.nominal: 50 |
| output.voltage: 226.0 |
| output.voltage.nominal: 230 |
| ups.beeper.status: enabled |
| ups.date: 2012/11/24 |
| ups.delay.shutdown: 20 |
| ups.delay.start: 30 |
| ups.firmware: 01.14.0003 |
| ups.load: 13 |
| ups.load.high: 110 |
| ups.mfr: DELL |
| ups.model: Dell UPS Rack/Tower 2700W HV - 230V |
| ups.power: 333 |
| ups.power.nominal: 2700 |
| ups.productid: ffff |
| ups.realpower: 306 |
| ups.realpower.nominal: 2700 |
| ups.serial: |
| ups.start.battery: yes |
| ups.start.reboot: yes |
| ups.status: OL CHRG |
| ups.test.interval: 7776000 |
| ups.test.result: No test initiated |
| ups.time: 22:45:33 |
| ups.timer.shutdown: 0 |
| ups.timer.start: 0 |
| ups.type: offline / line interactive |
| ups.vendorid: 047c |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |
| /web/acc/phpsysinfo/sample/ups/1-upscPW5110.txt |
|---|
| 0,0 → 1,19 |
| battery.voltage: 13.5 |
| driver.name: bcmxcp_usb |
| driver.parameter.pollinterval: 2 |
| driver.parameter.port: auto |
| driver.version: 2.2.2 |
| driver.version.internal: 0.14 |
| input.frequency: 49.9 |
| input.voltage: 234 |
| output.current: 0.3 |
| output.frequency: 49.9 |
| output.phases: 1 |
| output.voltage: 234 |
| output.voltage.nominal: 240 |
| ups.firmware: Cont:00.50 Inve:01.50 |
| ups.load: 16.7 |
| ups.model: POWERWARE UPS 700VA |
| ups.power.nominal: 700 |
| ups.serial: |
| ups.status: OL |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |
| /web/acc/phpsysinfo/sample/ups/1-upscl.txt |
|---|
| 0,0 → 1,0 |
| PW5110 |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |
| /web/acc/phpsysinfo/sample/ups/apcaccess1.txt |
|---|
| 0,0 → 1,53 |
| APC : 001,052,1303 |
| DATE : 2014-06-15 09:53:19 +0200 |
| HOSTNAME : intranet |
| VERSION : 3.14.10 (13 September 2011) redhat |
| UPSNAME : UPS_1 |
| CABLE : Custom Cable Smart |
| DRIVER : APC Smart UPS (any) |
| UPSMODE : Stand Alone |
| STARTTIME: 2014-05-21 17:17:39 +0200 |
| MODEL : SMART-UPS 700 |
| STATUS : ONLINE |
| LINEV : 231.4 Volts |
| LOADPCT : 23.9 Percent Load Capacity |
| BCHARGE : 100.0 Percent |
| TIMELEFT : 6.0 Minutes |
| MBATTCHG : 5 Percent |
| MINTIMEL : 3 Minutes |
| MAXTIME : 0 Seconds |
| MAXLINEV : 232.7 Volts |
| MINLINEV : 230.1 Volts |
| OUTPUTV : 231.4 Volts |
| SENSE : High |
| DWAKE : 000 Seconds |
| DSHUTD : 020 Seconds |
| DLOWBATT : 02 Minutes |
| LOTRANS : 196.0 Volts |
| HITRANS : 253.0 Volts |
| RETPCT : 000.0 Percent |
| ITEMP : 36.9 C Internal |
| ALARMDEL : 5 seconds |
| BATTV : 27.7 Volts |
| LINEFREQ : 50.0 Hz |
| LASTXFER : Line voltage notch or spike |
| NUMXFERS : 8 |
| XONBATT : 2014-06-12 13:25:24 +0200 |
| TONBATT : 0 seconds |
| CUMONBATT: 13 seconds |
| XOFFBATT : 2014-06-12 13:25:26 +0200 |
| SELFTEST : NO |
| STESTI : 336 |
| STATFLAG : 0x07000008 Status Flag |
| DIPSW : 0x00 Dip Switch |
| REG1 : 0x00 Register 1 |
| REG2 : 0x00 Register 2 |
| REG3 : 0x00 Register 3 |
| MANDATE : 12/01/98 |
| SERIALNO : NS9876543210 |
| BATTDATE : 08/01/14 |
| NOMOUTV : 230 Volts |
| NOMBATTV : 24.0 Volts |
| EXTBATTS : 0 |
| FIRMWARE : 50.11.I |
| END APC : 2014-06-15 09:54:07 +0200 |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |
| /web/acc/phpsysinfo/sample/ups/pmset.txt |
|---|
| 0,0 → 1,2 |
| Now drawing from 'AC Power' |
| -Back-UPS XS 900 FW:830.E7 .D USB FW:E7 100%; charging |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |
| /web/acc/phpsysinfo/sample/ups/powersoftplus1.txt |
|---|
| 0,0 → 1,16 |
| PowerSoft Plus v.0.1.6 - EVER UPS monitoring software |
| =========================================================== |
| Current UPS state : Normal mode |
| Alert : - |
| ----------------------------------------------------------- |
| Identifier: UPS Model : SINLINE 1200 |
| Identifier: UPS Version : Firmware: 1.1 |
| Battery state : At full capacity |
| Battery voltage : 27.2 [Volt] |
| Input voltage : 228 [Volt] |
| Input frequency : 50.0 [Hz] |
| Output voltage : 229 [Volt] |
| Output current : 0.4 [A] |
| Effective power : 61 [W] |
| Output load : 0 [%] |
| =========================================================== |
| Property changes: |
| Added: svn:eol-style |
| +native |
| \ No newline at end of property |