/rpms/ipt-netflow-2.2.tgz |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Deleted: svn:mime-type |
-application/octet-stream |
\ No newline at end of property |
/rpms/coova-chilli-1.3.2.tar.gz |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Deleted: svn:mime-type |
-application/octet-stream |
\ No newline at end of property |
/rpms/coova-chilli-1.3.2.spec |
---|
File deleted |
/rpms/rpm-build-howto |
---|
32,7 → 32,6 |
- rpmbuild -dd ***.spec |
**** ipt_netflow **** |
- Must be complied on a system which runs the target kernel ! |
- install the RPMs "kernel-server-devel", "lib64iptables-devel (or libiptables-devel in 32b arch)" |
- download, uncompress and test the conpilation of the last version of ipt-netflow (configure, make all install). The module is compiled in the same directory. The lib is copied in the /lib64/iptables |
- test the module : go to the directory of source and try to load it (modprobe ipt_NETFLOW), "lsmod" to verify that it's loaded, "alcasar-iptables.sh" to test the iptables rules |
/rpms/coova-chilli-1.3.1.4-2.mga5.i586.rpm |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/rpms/coova-chilli-1.3.1.spec |
---|
0,0 → 1,111 |
%define _disable_ld_no_undefined 1 |
Summary: CoovaChilli is an open-source software access controller for captive portal hotspots |
Name: coova-chilli |
Version: 1.3.1.4 |
Release: 2%{?dist} |
License: GPLv3 |
Packager: Richard REY (Rexy) |
Group: System/Servers |
URL: https://coova.github.io/CoovaChilli |
Source: %{name}-%{version}.tar.gz |
BuildRequires: libtool |
Provides: coova-chilli = %{version}-%{release} |
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot |
%description |
Coova-Chilli is a fork of the ChilliSpot project - an open source captive |
portal or wireless LAN access point controller. It supports web based login |
(Universal Access Method, or UAM), standard for public HotSpots, and it |
supports Wireless Protected Access (WPA), the standard for secure roamable |
networks. Authentication, Authorization and Accounting (AAA) is handled by |
your favorite radius server. Read more at http://coova.github.io/. |
%prep |
%setup -q -n %{name}-%{version} |
%build |
sh bootstrap |
%configure \ |
--disable-static \ |
--enable-shared \ |
--enable-largelimits \ |
--enable-chilliredir \ |
--enable-chilliscript \ |
--with-poll \ |
--enable-dhcpopt \ |
--enable-libjson \ |
--enable-json |
%make |
%post |
%_post_service chilli |
%preun |
%_preun_service chilli |
%install |
rm -rf %{buildroot} |
%makeinstall_std |
%clean |
rm -rf %{buildroot} |
%files |
%defattr(-,root,root) |
%{_sbindir}/* |
%{_libdir}/*.so* |
%doc AUTHORS COPYING ChangeLog INSTALL README doc/dictionary.coovachilli doc/attributes |
%config %{_sysconfdir}/chilli.conf |
%config %{_sysconfdir}/chilli/gui-config-default.ini |
%config(noreplace) %{_sysconfdir}/chilli/defaults |
%dir %{_sysconfdir}/chilli |
%{_sysconfdir}/init.d/chilli |
%{_sysconfdir}/chilli/wwwsh |
%{_sysconfdir}/chilli/functions |
%{_sysconfdir}/chilli/*.sh |
%{_mandir}/man1/*.1* |
%{_mandir}/man5/*.5* |
%{_mandir}/man8/*.8* |
%exclude %{_sysconfdir}/chilli/www/* |
%exclude %{_sysconfdir}/chilli/wpad.dat |
%exclude %{_includedir}/chilli* |
%exclude %{_libdir}/*.la* |
%exclude %{_libdir}/python/CoovaChilliLib.py* |
%changelog |
* Thu Jun 2 2016 Rexy for ALCASAR project |
- 1.3.1.4 release (Limited to ALCASAR project) |
* Sun Apr 3 2016 Rexy for ALCASAR project |
- 1.3.1.3 release (Limited to ALCASAR project) |
* Tue May 14 2013 Crox for ALCASAR project |
- 1.3.0 release (Limited to ALCASAR project) |
* Mon Jun 18 2012 Rexy for ALCASAR project |
- 1.2.9-1 release |
* Wed Jan 18 2012 Rexy for ALCASAR project |
- 1.2.9 release |
* Sun Jul 11 2011 Rexy for ALCASAR project |
- 1.2.8 release |
* Sat Feb 12 2011 Rexy for Alcasar project |
+ revision: 433 |
+ add _disable_ld_no_undefined 1 |
- 1.2.6 release |
* Sat Nov 20 2010 Rexy for Alcasar project |
+ revision: 394 |
- 1.2.5 release |
* Sat Jan 2 2010 <david@coova.com> |
- 1.2.0 release |
* Thu Sep 30 2007 <david@coova.com> |
- 1.0.8 release |
* Thu Aug 20 2007 <david@coova.com> |
- 1.0-coova.7 release |
* Thu Jun 7 2007 <david@coova.com> |
- 1.0-coova.6 release |
* Wed May 16 2007 <david@coova.com> |
- 1.0-coova.5 release |
* Wed Feb 07 2007 <david@coova.com> |
- 1.0-coova.4 release |
* Wed Nov 15 2006 <david@coova.com> |
- 1.0-coova.3 release |
* Thu Mar 25 2004 <support@chillispot.org> |
- Initial release. |
/rpms/ipt-netflow-2.2-2.mga5.i586.rpm |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/rpms/coova-chilli-1.3.0-1.spec |
---|
0,0 → 1,110 |
%define _disable_ld_no_undefined 1 |
Summary: Wireless LAN Access Point Controller |
Name: coova-chilli |
Version: 1.3.0 |
Release: %mkrel 1%{?dist} |
License: GPLv3 |
Packager: Rexy & Crox (from ALCASAR team) |
Group: System/Servers |
URL: http://coova.org/wiki/index.php/CoovaChilli |
Source0: http://ap.coova.org/chilli/%{name}-%{version}.tar.gz |
Requires(pre): rpm-helper |
Requires(postun): rpm-helper |
BuildRequires: libtool |
Provides: coova-chilli = %{version}-%{release} |
Obsoletes: chillispot |
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot |
%description |
Coova-Chilli is a fork of the ChilliSpot project - an open source captive |
portal or wireless LAN access point controller. It supports web based login |
(Universal Access Method, or UAM), standard for public HotSpots, and it |
supports Wireless Protected Access (WPA), the standard for secure roamable |
networks. Authentication, Authorization and Accounting (AAA) is handled by |
your favorite radius server. Read more at http://coova.org/ and |
http://www.chillispot.org/. |
%prep |
%setup -q -n %{name}-%{version} |
%build |
%configure2_5x \ |
--disable-static \ |
--enable-shared \ |
--enable-largelimits \ |
--enable-chilliredir \ |
--enable-chilliproxy \ |
--enable-chilliscript \ |
--with-poll |
%make |
%post |
%_post_service chilli |
%preun |
%_preun_service chilli |
%install |
rm -rf %{buildroot} |
%makeinstall_std |
%clean |
rm -rf %{buildroot} |
%files |
%defattr(-,root,root) |
%{_sbindir}/* |
%{_libdir}/*.so* |
%doc AUTHORS COPYING ChangeLog INSTALL README doc/dictionary.chillispot doc/hotspotlogin.cgi |
%config %{_sysconfdir}/chilli.conf |
%config %{_sysconfdir}/chilli/gui-config-default.ini |
%config(noreplace) %{_sysconfdir}/chilli/defaults |
%dir %{_sysconfdir}/chilli |
%{_sysconfdir}/init.d/chilli |
%{_sysconfdir}/chilli/wwwsh |
%{_sysconfdir}/chilli/functions |
%{_sysconfdir}/chilli/*.sh |
%{_mandir}/man1/*.1* |
%{_mandir}/man5/*.5* |
%{_mandir}/man8/*.8* |
%exclude %{_sysconfdir}/chilli/www/* |
%exclude %{_sysconfdir}/chilli/wpad.dat |
%exclude %{_includedir}/chilli* |
%exclude %{_libdir}/*.la* |
%exclude %{_libdir}/python/* |
%changelog |
* Mon Dec 29 2014 Rexy for ALCASAR project |
- 1.3.0-1 release (from SVN revision 492) |
* Tue May 14 2013 Crox for ALCASAR project |
- 1.3.0 release |
* Mon Jun 18 2012 Rexy for ALCASAR project |
- 1.2.9-1 release |
* Wed Jan 18 2012 Rexy for ALCASAR project |
- 1.2.9 release |
* Sun Jul 11 2011 Rexy for ALCASAR project |
- 1.2.8 release |
* Sat Feb 12 2011 Rexy for Alcasar project |
+ revision: 433 |
+ add _disable_ld_no_undefined 1 |
- 1.2.6 release |
* Sat Nov 20 2010 Rexy for Alcasar project |
+ revision: 394 |
- 1.2.5 release |
* Sat Jan 2 2010 <david@coova.com> |
- 1.2.0 release |
* Thu Sep 30 2007 <david@coova.com> |
- 1.0.8 release |
* Thu Aug 20 2007 <david@coova.com> |
- 1.0-coova.7 release |
* Thu Jun 7 2007 <david@coova.com> |
- 1.0-coova.6 release |
* Wed May 16 2007 <david@coova.com> |
- 1.0-coova.5 release |
* Wed Feb 07 2007 <david@coova.com> |
- 1.0-coova.4 release |
* Wed Nov 15 2006 <david@coova.com> |
- 1.0-coova.3 release |
* Thu Mar 25 2004 <support@chillispot.org> |
- Initial release. |
/rpms/coova-chilli-1.3.0.spec |
---|
0,0 → 1,107 |
%define _disable_ld_no_undefined 1 |
Summary: Wireless LAN Access Point Controller |
Name: coova-chilli |
Version: 1.3.0 |
Release: %mkrel 0%{?dist} |
License: GPLv3 |
Packager: Francois Crosnier (Crox) ALCASAR team |
Group: System/Servers |
URL: http://coova.org/wiki/index.php/CoovaChilli |
Source0: http://ap.coova.org/chilli/%{name}-%{version}.tar.gz |
Requires(pre): rpm-helper |
Requires(postun): rpm-helper |
BuildRequires: libtool |
Provides: coova-chilli = %{version}-%{release} |
Obsoletes: chillispot |
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot |
%description |
Coova-Chilli is a fork of the ChilliSpot project - an open source captive |
portal or wireless LAN access point controller. It supports web based login |
(Universal Access Method, or UAM), standard for public HotSpots, and it |
supports Wireless Protected Access (WPA), the standard for secure roamable |
networks. Authentication, Authorization and Accounting (AAA) is handled by |
your favorite radius server. Read more at http://coova.org/ and |
http://www.chillispot.org/. |
%prep |
%setup -q -n %{name}-%{version} |
%build |
%configure2_5x \ |
--disable-static \ |
--enable-shared \ |
--enable-largelimits \ |
--enable-chilliredir \ |
--enable-chilliproxy \ |
--enable-chilliscript \ |
--with-poll |
%make |
%post |
%_post_service chilli |
%preun |
%_preun_service chilli |
%install |
rm -rf %{buildroot} |
%makeinstall_std |
%clean |
rm -rf %{buildroot} |
%files |
%defattr(-,root,root) |
%{_sbindir}/* |
%{_libdir}/*.so* |
%doc AUTHORS COPYING ChangeLog INSTALL README doc/dictionary.chillispot doc/hotspotlogin.cgi |
%config %{_sysconfdir}/chilli.conf |
%config %{_sysconfdir}/chilli/gui-config-default.ini |
%config(noreplace) %{_sysconfdir}/chilli/defaults |
%dir %{_sysconfdir}/chilli |
%{_sysconfdir}/init.d/chilli |
%{_sysconfdir}/chilli/wwwsh |
%{_sysconfdir}/chilli/functions |
%{_sysconfdir}/chilli/*.sh |
%{_mandir}/man1/*.1* |
%{_mandir}/man5/*.5* |
%{_mandir}/man8/*.8* |
%exclude %{_sysconfdir}/chilli/www/* |
%exclude %{_includedir}/chilli* |
%exclude %{_libdir}/*.la* |
%exclude %{_libdir}/python/CoovaChilliLib.py |
%changelog |
* Tue May 14 2013 Crox for ALCASAR project |
- 1.3.0 release (Limited for ALCASAR project) |
* Mon Jun 18 2012 Rexy for ALCASAR project |
- 1.2.9-1 release |
* Wed Jan 18 2012 Rexy for ALCASAR project |
- 1.2.9 release |
* Sun Jul 11 2011 Rexy for ALCASAR project |
- 1.2.8 release |
* Sat Feb 12 2011 Rexy for Alcasar project |
+ revision: 433 |
+ add _disable_ld_no_undefined 1 |
- 1.2.6 release |
* Sat Nov 20 2010 Rexy for Alcasar project |
+ revision: 394 |
- 1.2.5 release |
* Sat Jan 2 2010 <david@coova.com> |
- 1.2.0 release |
* Thu Sep 30 2007 <david@coova.com> |
- 1.0.8 release |
* Thu Aug 20 2007 <david@coova.com> |
- 1.0-coova.7 release |
* Thu Jun 7 2007 <david@coova.com> |
- 1.0-coova.6 release |
* Wed May 16 2007 <david@coova.com> |
- 1.0-coova.5 release |
* Wed Feb 07 2007 <david@coova.com> |
- 1.0-coova.4 release |
* Wed Nov 15 2006 <david@coova.com> |
- 1.0-coova.3 release |
* Thu Mar 25 2004 <support@chillispot.org> |
- Initial release. |