| 0,0 → 1,824 |
|---|
| ; PSI Config File |
| ; |
| ; @category PHP |
| ; @package PSI |
| ; @author Michael Cramer <BigMichi1@users.sourceforge.net> |
| ; @copyright 2009 phpSysInfo |
| ; @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version |
| ; @version SVN: $Id: phpsysinfo.ini.new 705 2012-11-11 00:33:29Z namiltd $ |
| ; @link http://phpsysinfo.sourceforge.net |
| |
| [main] |
| ; ******************************** |
| ; MAIN PARAMETERS |
| ; ******************************** |
| |
| ; Turn on debugging of some functions and include errors and warnings in xml and provide a popup for displaying errors |
| ; - false : no debug information are stored in xml or displayed |
| ; - true : debug information stored in xml and displayed *be careful if set this to true, may include sensitive information from your pc* |
| ; |
| DEBUG=false |
| |
| ; Turn on logging/unlogging of functions executeProgram() and rfts() |
| ; example : executeProgram () and rfts () record the results to the "/tmp/phpsysinfo.log" file |
| ; LOG="/tmp/phpsysinfo.log" |
| ; example : executeProgram () and rfts () read the results from the "/tmp/phpsysinfo.log" file |
| ; LOG="-/tmp/phpsysinfo.log" |
| ; example : executeProgram () and rfts () read the results from the "/tmp/phpsysinfo.log" file |
| ; LOG="+/tmp/phpsysinfo.log", if lack in the log file it runs normally |
| ; |
| LOG=false |
| |
| ; Turn on/off compression for JavaScript file |
| ; - JS_COMPRESSION=false //no compression (recommended with slow processor) |
| ; - JS_COMPRESSION="None" //code minimizing |
| ; - JS_COMPRESSION="Normal" //code packing |
| ; |
| JS_COMPRESSION="Normal" |
| |
| ; Additional paths where to look for installed programs |
| ; Example : ADD_PATHS="/opt/bin,/opt/sbin" |
| ; |
| ADD_PATHS=false |
| |
| ; List of IP addresses of clients authorized to run |
| ; Example : ALLOWED="127.0.0.1,192.168.1.48" //allowed IP 127.0.0.1 and 192.168.1.48 |
| ; ALLOWED=false //no IP checking |
| ; |
| ALLOWED=false |
| |
| ; List of sudo commands |
| ; Example : SUDO_COMMANDS="iptables-save" //execute "sudo iptables-save" instead "iptables-save" |
| ; SUDO_COMMANDS=false //no sudo commands |
| ; |
| SUDO_COMMANDS=false |
| |
| ; Order of data blocks |
| ; Example : BLOCKS="vitals,hardware,memory,filesystem,network,voltage,current,temperature,fans,power,other,ups" or BLOCKS=true //default order |
| ; BLOCKS=false //hide all blocks |
| ; |
| BLOCKS=true |
| |
| |
| ; Plugins that should be included in xml and output |
| ; List of plugins should look like "plugin,plugin,plugin". See /plugins directory |
| ; - PLUGINS="MDStatus,PS" //list of plugins |
| ; - PLUGINS=false //no plugins |
| ; included plugins: |
| ; - Raid - show the software, fake, zpool or megaraid RAID status |
| ; - PS - show a process tree of all running processes |
| ; - PSStatus - show a graphical representation if a process is running or not |
| ; - Quotas - show a table with all quotas that are active and there current state |
| ; - SMART - show S.M.A.R.T. information from drives that support it |
| ; - BAT - show battery state on a laptop, tablet or phone |
| ; - UpdateNotifier - show update notifications (only for Ubuntu server) |
| ; - SNMPPInfo - show printers info via SNMP |
| ; - Uprecords - show uprecords info |
| ; - Iptables - show iptables rules list |
| ; - PingTest - show Ping Test info |
| ; - StableBit - show StableBit Scanner info (WinNT) |
| ; - HyperV - show Hyper-V info (WinNT) |
| ; - Docker - show docker stats |
| ; |
| PLUGINS=false |
| |
| |
| ; ******************************** |
| ; DISPLAY PARAMETERS |
| ; ******************************** |
| |
| |
| ; Define the default display mode |
| ; auto: let user browser choose the mode |
| ; dynamic: use javascript to refresh data |
| ; static: static page (use metatag to reload page) |
| ; bootstrap: use twitter bootstrap template |
| ; |
| DEFAULT_DISPLAY_MODE="dynamic" |
| |
| |
| ; Define the default language |
| ; |
| DEFAULT_LANG="en" |
| |
| |
| ; Define the default template |
| ; |
| DEFAULT_TEMPLATE="cream" |
| |
| |
| ; Define the default template for frontend "bootstrap" |
| ; |
| DEFAULT_BOOTSTRAP_TEMPLATE="phpsysinfo" |
| |
| |
| ; Show or hide language picklist |
| ; |
| SHOW_PICKLIST_LANG=false |
| |
| |
| ; Show or hide template picklist |
| ; |
| SHOW_PICKLIST_TEMPLATE=false |
| |
| |
| ; Show CPU list expanded |
| ; |
| SHOW_CPULIST_EXPANDED=false |
| |
| |
| ; Show CPU info expanded |
| ; |
| SHOW_CPUINFO_EXPANDED=false |
| |
| |
| ; Show memory infos expanded |
| ; |
| SHOW_MEMORY_INFOS_EXPANDED=false |
| |
| |
| ; Hide loader for frontend "bootstrap" |
| ; |
| HIDE_BOOTSTRAP_LOADER=true |
| |
| |
| ; Define the interval for refreshing data in ms |
| ; - 0 : disabled |
| ; - 1000 : 1 second |
| ; Default is 60 seconds |
| ; |
| REFRESH=60000 |
| |
| |
| ; Show a graph for current cpuload |
| ; - true : displayed, but it's a performance hit (because we have to wait to get a value, 1 second) |
| ; - "compact" : displayed like above but in compact mode |
| ; - false : will not be displayed |
| ; |
| LOAD_BAR=true |
| |
| |
| ; Display the virtual host name and address |
| ; - Default is canonical host name and address |
| ; - Use USE_VHOST=true to display virtual host name. |
| ; |
| USE_VHOST=false |
| |
| |
| ; Controls the units & format for network, memory and filesystem |
| ; - 1 KiB = 2^10 bytes = 1,024 bytes |
| ; - 1 KB = 10^3 bytes = 1,000 bytes |
| ; - "B" everything is in Byte |
| ; - "PiB" everything is in PeBiByte |
| ; - "TiB" everything is in TeBiByte |
| ; - "GiB" everything is in GiBiByte |
| ; - "MiB" everything is in MeBiByte |
| ; - "KiB" everything is in KiBiByte |
| ; - "auto_binary" everything is automatic done if value is to big for, e.g MiB then it will be in GiB |
| ; - "PB" everything is in PetaByte |
| ; - "TB" everything is in TeraByte |
| ; - "GB" everything is in GigaByte |
| ; - "MB" everything is in MegaByte |
| ; - "KB" everything is in KiloByte |
| ; - "auto_decimal" everything is automatic done if value is to big for, e.g MB then it will be in GB |
| ; |
| BYTE_FORMAT="auto_binary" |
| |
| |
| ; Format in which temperature is displayed |
| ; - "c" shown in celsius |
| ; - "f" shown in fahrenheit |
| ; - "c-f" both shown first celsius and fahrenheit in braces |
| ; - "f-c" both shown first fahrenheit and celsius in braces |
| ; |
| TEMP_FORMAT="c" |
| |
| |
| ; Show devices infos |
| ; Example : SHOW_DEVICES_INFOS=true |
| ; |
| SHOW_DEVICES_INFOS=false |
| |
| |
| ; Show devices serial number |
| ; Example : SHOW_DEVICES_SERIAL=true |
| ; |
| SHOW_DEVICES_SERIAL=false |
| |
| |
| ; Format in which datetime is displayed |
| ; - "UTC" shown as UTC string |
| ; - "locale" shown as Locale string |
| ; |
| DATETIME_FORMAT="UTC" |
| |
| |
| ; ******************************** |
| ; SENSORS PARAMETERS |
| ; ******************************** |
| |
| |
| ; Define the motherboard monitoring program |
| ; We support the following programs so far |
| ; - HDDtemp http://www.guzu.net/linux/hddtemp.php (Linux) |
| ; - LMSensors http://www.lm-sensors.org/ (Linux) |
| ; - Healthd http://healthd.thehousleys.net/ (FreeBSD) |
| ; - HWSensors http://www.openbsd.org/ (OpenBSD) |
| ; - MBMon http://www.nt.phys.kyushu-u.ac.jp/shimizu/download/download.html (FreeBSD/Linux/NetBSD/OpenBSD) |
| ; - MBM5 http://mbm.livewiredev.com/ (data from file data/MBM5.csv - WinNT) |
| ; - Coretemp No addon tool neded (FreeBSD/Linux) |
| ; - IPMItool http://ipmitool.sourceforge.net/ (Linux) |
| ; - FreeIPMI http://www.gnu.org/software/freeipmi/ (FreeBSD/Linux/OpenBSD/SunOS) |
| ; - IPMIutil http://ipmiutil.sourceforge.net/ (Darwin/FreeBSD/Linux/SunOS/WinNT) |
| ; - K8Temp http://hur.st/k8temp/ (DragonFly/FreeBSD/NetBSD/OpenBSD) |
| ; - PiTemp No addon tool neded (Raspberry Pi and Banana Pi - Linux) |
| ; - OHM http://openhardwaremonitor.org/ (WinNT) |
| ; - ThermalZone No addon tool neded (WinNT/Linux/Android) |
| ; - QTSsnmp SNMP service enabled and snmp-utils package installed: opkg install snmp-utils (QNAP - QTS Linux) |
| ; - Hwmon No addon tool neded (Linux) |
| ; - SpeedFan http://www.almico.com/speedfan.php (required tool packaged in: tools/speedfan/SpeedFanGet_bin.zip) (WinNT) |
| ; - Thinkpad No addon tool neded (Lenovo Thinkpad - Linux) |
| ; |
| ; Example: If you want to use lmsensors : SENSOR_PROGRAM="LMSensors" |
| ; If you want to use lmsensors and IPMItool: SENSOR_PROGRAM="LMSensors,IPMItool" |
| ; |
| SENSOR_PROGRAM=false |
| |
| |
| ; Show events of sensors |
| ; - true : show events |
| ; - false : do not show events |
| ; |
| SENSOR_EVENTS=true |
| |
| |
| ; Sort sensors list |
| ; |
| SORT_SENSORS_LIST=false |
| |
| |
| ; Some sensors programs contain an additional configuration in the relevant sections [sensor_...] |
| |
| |
| ; ******************************** |
| ; FILESYSTEM PARAMETERS |
| ; ******************************** |
| |
| |
| ; Show mount point |
| ; - true : show mount point |
| ; - false : do not show mount point |
| ; |
| SHOW_MOUNT_POINT=true |
| |
| |
| ; Show mount option |
| ; - true : show mount option |
| ; - false : do not show mount option |
| ; |
| SHOW_MOUNT_OPTION=true |
| |
| |
| ; Show mount credentials |
| ; - true : show mount credentials |
| ; - false : do not show mount credentials |
| ; |
| SHOW_MOUNT_CREDENTIALS=false |
| |
| |
| ; Show inode usage |
| ; - true : display used inodes in percent |
| ; - false : hide them |
| ; |
| SHOW_INODES=false |
| |
| |
| ; Hide mounts |
| ; Example : HIDE_MOUNTS="/home,/usr" |
| ; |
| ; HIDE_MOUNTS="/dev,/dev/shm,/run,/run/user/0,/var/tmp/havp,/sys/fs/cgroup" |
| HIDE_MOUNTS="" |
| |
| |
| ; Filesystem usage warning threshold in percent |
| ; - 0 : disabled |
| ; - 90 : 90% |
| ; Default is 90% |
| ; |
| FS_USAGE_THRESHOLD=90 |
| |
| |
| ; Ignore usage and usage threshold for filesystem types |
| ; Example : IGNORE_THRESHOLD_FS_TYPES="iso9660, squashfs, devfs, devtmpfs, lxfs, udf, UDF, CDFS" |
| ; |
| IGNORE_THRESHOLD_FS_TYPES="iso9660, squashfs, devfs, devtmpfs, lxfs, udf, UDF, CDFS" |
| |
| |
| ; Ignore usage of mounts |
| ; Example : IGNORE_USAGE="/root,/mnt/c" |
| ; |
| IGNORE_USAGE="" |
| |
| |
| ; Ignore free space size of mounts |
| ; Example : IGNORE_FREE="/zfs/space,/zfs/data" |
| ; |
| IGNORE_FREE="" |
| |
| |
| ; Hide filesystem types |
| ; Example : HIDE_FS_TYPES="tmpfs,devtmpfs,usbfs,bstfolder" |
| ; |
| HIDE_FS_TYPES="tmpfs,devtmpfs" |
| |
| |
| ; Hide partitions |
| ; Example : HIDE_DISKS="rootfs,/dev/sda1" |
| ; HIDE_DISKS=true //hide all partitions |
| ; |
| HIDE_DISKS="" |
| |
| |
| ; ******************************** |
| ; NETWORK PARAMETERS |
| ; ******************************** |
| |
| |
| ; Hide network interfaces |
| ; Example : HIDE_NETWORK_INTERFACE="eth0,sit0" |
| ; HIDE_NETWORK_INTERFACE=true //hide all network interfaces |
| ; |
| HIDE_NETWORK_INTERFACE="lo,tun0" |
| |
| |
| ; Show network interfaces infos for Linux, Android, FreeBSD, NetBSD, OpenBSD, Haiku, Darwin, SunOS, Minix, QNX and WinNT |
| ; Example : SHOW_NETWORK_INFOS=true |
| ; |
| SHOW_NETWORK_INFOS=true |
| |
| |
| ; Hide MAC address in the infos |
| ; |
| HIDE_NETWORK_MACADDR=false |
| |
| |
| ; Sort network interfaces list |
| ; |
| SORT_NETWORK_INTERFACES_LIST=false |
| |
| |
| ; Show network infos expanded |
| ; |
| SHOW_NETWORK_INFOS_EXPANDED=false |
| |
| |
| ; Show network active speed |
| ; - true : display network active speed |
| ; - "bps" : display network active speed in bits per second (b/s, Kb/s, etc...) |
| ; - false : hide them |
| ; |
| SHOW_NETWORK_ACTIVE_SPEED=true |
| |
| |
| ; ******************************** |
| ; UPS PARAMETERS |
| ; ******************************** |
| |
| |
| ; Define the ups monitoring program |
| ; We support the following programs so far |
| ; - Apcupsd http://www.apcupsd.com/ |
| ; - Nut http://www.networkupstools.org/ |
| ; - PowerSoftPlus http://ever.eu/ |
| ; - pmset based on the result of the command "pmset -g batt" on Darwin system |
| ; - SNMPups monitoring via Simple Network Management Protocol (SNMP) |
| ; |
| ; Example: If you want to use Apcupsd : UPS_PROGRAM="Apcupsd" |
| ; If you want to use Apcupsd and Nut : UPS_PROGRAM="Apcupsd,Nut" |
| ; |
| UPS_PROGRAM=false |
| |
| |
| ; Apcupsd supports multiple UPSes |
| ; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The defaults are: 127.0.0.1:3551 |
| ; See the following parameters in apcupsd.conf: NETSERVER, NISIP, NISPORT |
| ; It uses the defaults if not specified. |
| ; |
| UPS_APCUPSD_LIST=false |
| |
| |
| ; Apcupsd has a CGI monitoring utility called apcupsd-cgi |
| ; You can set the parameter below to true if you have it installed - this will add apcupsd-cgi links to the UPS tree |
| ; |
| UPS_APCUPSD_CGI_ENABLE=false |
| |
| |
| ; Nut supports multiple UPSes |
| ; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The defaults are: 127.0.0.1:3493 |
| ; See the following parameters in upsd.conf: LISTEN |
| ; It uses the defaults if not specified. |
| ; |
| UPS_NUT_LIST=false |
| |
| |
| ; SNMPups supports multiple UPSes |
| ; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The default port is 161 |
| ; List must be specified. |
| ; |
| UPS_SNMPUPS_LIST=false |
| |
| |
| ; define how to access the SNMP data |
| ; - "php-snmp" execute php snmprealwalk function (php-snmp module must be installed) |
| ; - "command" execute snmpwalk command |
| ; |
| UPS_SNMPUPS_ACCESS="php-snmp" |
| |
| |
| ; ******************************** |
| ; SENSORS PROGRAMS PARAMETERS |
| ; ******************************** |
| |
| |
| [sensor_hddtemp] |
| ; Hddtemp motherboard monitoring program configuration |
| ; |
| ; If the hddtemp program is available we can read the temperature, if hdd is smart capable |
| ; !!ATTENTION!! hddtemp might be a security issue |
| ; - ACCESS="command" //read data from 'hddtemp' command (must be set suid) |
| ; - ACCESS="tcp" //read data from hddtemp deamon (localhost:7634) |
| ; |
| ACCESS="command" |
| |
| [sensor_lmsensors] |
| ; LMSensors motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'sensors' command |
| ; - ACCESS="data" //read data from file data/lmsensors.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_healthd] |
| ; Healthd motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'healthdc' command |
| ; - ACCESS="data" //read data from file data/healthd.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_mbmon] |
| ; MBMon motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'mbmon -c 1 -r' command |
| ; - ACCESS="data" //read data from file data/mbmon.txt |
| ; - ACCESS="tcp" //read data from mbmon deamon (localhost:411) |
| ; |
| ACCESS="command" |
| |
| [sensor_ipmitool] |
| ; IPMItool motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'ipmitool sensor -v' command |
| ; //if access error execute first: chmod 666 /dev/ipmi0 |
| ; - ACCESS="data" //read data from file data/ipmitool.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_freeipmi] |
| ; FreeIPMI motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'ipmi-sensors --output-sensor-thresholds' program |
| ; - ACCESS="data" //read data from file data/freeipmi.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_ipmiutil] |
| ; IPMIutil motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'ipmiutil sensor -stw' command |
| ; //if access error execute first: chmod 666 /dev/ipmi0 |
| ; - ACCESS="data" //read data from file data/ipmiutil.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_k8temp] |
| ; K8Temp motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'k8temp' command |
| ; - ACCESS="data" //read data from file data/k8temp.txt |
| ; |
| ACCESS="command" |
| |
| [sensor_speedfan] |
| ; SpeedFan motherboard monitoring program configuration |
| ; |
| ; - ACCESS="command" //read data from 'speedfanget' command |
| ; - ACCESS="data" //read data from file data/speedfan.txt |
| ; |
| ACCESS="command" |
| |
| |
| ; ******************************** |
| ; PLUGINS PARAMETERS |
| ; ******************************** |
| |
| |
| [bat] |
| ; BAT Plugin configuration |
| |
| ; define how to access the battery statistic data |
| ; - "command" on Linux and Android read data from /proc/acpi/battery/BAT0/info and /proc/acpi/battery/BAT0/state |
| ; or on newer kernel from /sys/class/power_supply/ |
| ; or from 'upower -d' command (if UPOWER is true) |
| ; on Android read data from /sys/class/power_supply/ |
| ; on Darwin read data from 'ioreg -w0 -l -n AppleSmartBattery -r' command |
| ; on FreeBSD read data from 'acpiconf -i batt' command |
| ; on OpenBSD read data from 'sysctl hw.sensors.acpibat0' command |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "bat_info.txt" and "bat_state.txt"; content is the output |
| ; from "cat /proc/acpi/battery/BAT0/info" and "cat /proc/acpi/battery/BAT0/state") |
| ; |
| ACCESS="command" |
| |
| ; on Lunux try executing 'upower -d' command |
| ; |
| UPOWER=false |
| |
| ; Show battery serial number |
| ; |
| SHOW_SERIAL=false |
| |
| |
| [raid] |
| ; Raid Plugin configuration |
| |
| ; define how to access the raid statistic data |
| ; - "command" - mdstat: file "/proc/mdstat" is read (on Linux only) |
| ; - dmraid: command "dmraid -s -vv 2>&1" is run (on Linux only) |
| ; If access error try execute first: chmod 4755 /sbin/dmraid |
| ; This method is not recommended for safety reasons! |
| ; - megactl: command "megactl" (on Linux only) |
| ; downloaded from http://sourceforge.net/projects/megactl/ or http://github.com/hmage/megactl |
| ; If permission error try execute first: chmod 4755 /usr/sbin/megactl |
| ; - megasasctl: command "megasasctl" (on Linux only) |
| ; downloaded from http://sourceforge.net/projects/megactl/ or http://github.com/hmage/megactl |
| ; If permission error try execute first: chmod 4755 /usr/sbin/megasasctl |
| ; - graid: command "graid list" is run (on FreeBSD only) |
| ; - zpool: command "zpool status" is run |
| ; - idrac: command "snmpwalk -Ona -c public -v 1 -r 0 -t 3 {device} .1.3.6.1.4.1.674.10892.5.5.1.20" is run |
| ; - "php-snmp"- idrac: execute php snmprealwalk function (php-snmp module must be installed) |
| ; - for others the option is inactive (uses "command" instead) |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "raidmdstat.txt" or "raiddmraid.txt" or "raidmegactl.txt" |
| ; or "raidmegasasctl" or "raidgraid.txt" or "raidzpool.txt" or "raididrac{device_number}.txt") |
| ; |
| ACCESS="command" |
| |
| ; define possible programs |
| PROGRAM="mdstat,dmraid,megactl,megasasctl,graid,zpool,idrac" |
| |
| ; Hide RAID devices |
| ; Example : HIDE_DEVICES="md127" |
| ; |
| HIDE_DEVICES="" |
| |
| ; |
| ; string contains a list of IDRAC devices that are checked |
| ; Example : IDRAC_DEVICES="192.168.0.120" |
| ; |
| IDRAC_DEVICES="" |
| |
| [ps] |
| ; PS Plugin configuration |
| |
| ; define how to access the ps statistic data |
| ; - "command" ps command is run everytime the block gets refreshed or build / on WINNT |
| ; information is retrieved everytime through WMI |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "ps.txt"; content is the output from "ps -axo pid,ppid,pmem,args") |
| ; |
| ACCESS="command" |
| |
| ; Memory Usage info |
| ; |
| MEMORY_USAGE=true |
| |
| ; CPU Usage info |
| ; |
| CPU_USAGE=true |
| |
| ; Show kthreadd child list expanded |
| ; |
| SHOW_KTHREADD_EXPANDED=false |
| |
| ; Show PID 1 child list expanded |
| ; |
| SHOW_PID1CHILD_EXPANDED=false |
| |
| |
| [psstatus] |
| ; PSStatus Plugin configuration |
| |
| ; define how to access the psstatus statistic data |
| ; - "command" pidof command is run everytime the block gets refreshed or build / on WINNT |
| ; information is retrieved everytime through WMI |
| ; - "data" a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "psstatus.txt"; content is the output from |
| ; <code>for ps in "apache2" "mysqld" "sshd"; do echo $ps "|" `pidof -s -x "$ps"`; done</code> |
| ; |
| ACCESS="command" |
| |
| ; Regular expression search in the process name (e.g. "ddclient.*") |
| ; - true : Regular expression search (used pgrep command) |
| ; - false : Normal search (used pidof command) |
| ; |
| USE_REGEX=false |
| |
| ; controls which processes are checked if they are running |
| ; |
| ; string contains a list of process names that are checked, names are seperated by a comma (on WINNT names must end with '.exe') |
| ; |
| PROCESSES="mysqld, sshd, explorer.exe" |
| |
| |
| [quotas] |
| ; Quotas Plugin configuration |
| |
| ; define how to access the repquota statistic data |
| ; - "command" repquota command is run everytime the block gets refreshed or build |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation with the filename "quotas.txt"; content is the output from "repquota -au") |
| ; |
| ACCESS="command" |
| |
| |
| [smart] |
| ; SMART Plugin configuration |
| |
| ; Smartctl program |
| ; If the smartctl program is available we can read S.M.A.R.T informations |
| ; - "command" smartctl command is run everytime the block gets refreshed or build |
| ; if error: Smartctl open device: /dev/sda failed: Permission denied |
| ; Not recommended method: |
| ; execute: chmod 4755 /usr/sbin/smartctl |
| ; Second method: |
| ; try to set: SUDO_COMMANDS="smartctl" and add to file /etc/sudoers line: apache ALL = (ALL) NOPASSWD: /usr/sbin/smartctl |
| ; - "data" (a file must be available in the data directory of the |
| ; phpsysinfo installation with the filename "smart{disk_number}.txt"; |
| ; content is the output from "smartctl --all device") |
| ; - "wmi" information is retrieved everytime through WMI (WinNT only) |
| ; |
| ACCESS="command" |
| |
| ; Smartctl devices to monitor |
| ; If the smartctl support is enabled, those disks information will be displayed |
| ; - DEVICES="/dev/hda,/dev/hdb" //Will display those two disks informations |
| ; You also can specify --device option value for smartctl command surrounded by parentheses eg: |
| ; - DEVICES="(marvell)/dev/sda" |
| ; or |
| ; - DEVICES="(megaraid.0)/dev/sda" //comma in --device option value is replaced by a dot |
| ; |
| DEVICES="/dev/sda, /dev/sdb" |
| |
| ; Smartctl ID# and column name from "Vendor Specific SMART Attributes with Thresholds" table |
| ; If the smartctl support is enabled, enter the ID#-COLUMN_NAME from "Vendor Specific SMART Attributes with Thresholds" table from smartctl output. |
| ; or for no SCSI devices: ID#-COLUMN_NAME-REPLACEMENT_ID# where REPLACEMENT_ID# is an alternative ID number. |
| ; COLUMN_NAME of this ID# will be displayed in the phpsysinfo S.M.A.R.T table. If you want RAW_VALUE to be displayed for the temperature (ID# 194) enter 194-RAW_VALUE |
| ; - IDS="194-VALUE,4-VALUE,009-RAW_VALUE" //ID#-COLUMN_NAME, ID#-COLUMN_NAME, etc... |
| ; |
| IDS="005-RAW_VALUE,194-RAW_VALUE,4-RAW_VALUE,009-RAW_VALUE,012-RAW_VALUE,193-RAW_VALUE-225,001-RAW_VALUE,007-RAW_VALUE,200-RAW_VALUE,197-RAW_VALUE,198-RAW_VALUE" |
| |
| |
| [snmppinfo] |
| ; SNMPPInfo Plugin configuration |
| |
| ; define how to access the SNMP Printer Info statistic data |
| ; - "php-snmp" execute php snmprealwalk function (php-snmp module must be installed) |
| ; - "command" execute snmpwalk command |
| ; - "data" a file must be available in the data directory of the |
| ; phpsysinfo installation with the filename "snmppinfo{printer_number}.txt"; |
| ; content is the output from: |
| ; LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.1.5 > snmppinfo{printer_number}.txt |
| ; LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.4.1.367.3.2.1.2.24.1.1 >> snmppinfo{printer_number}.txt |
| ; LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.43.11.1.1 >> snmppinfo{printer_number}.txt |
| ; LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.43.18.1.1 >> snmppinfo{printer_number}.txt |
| ; |
| ACCESS="php-snmp" |
| |
| ;define the Printer devices |
| ; |
| ; string contains a list of printer addresses that are checked |
| ; |
| DEVICES="192.168.0.5, 192.168.0.9" |
| |
| |
| [updatenotifier] |
| ; Update Notifier Plugin configuration |
| |
| ; define how to access the updatenotifier statistic data |
| ; - "command" execute command /usr/lib/update-notifier/apt-check |
| ; - "data" reads data from file defined in FILE parameter |
| ; |
| ACCESS="data" |
| |
| ; define the update info file format |
| ; - true: Ubuntu Landscape format (file: /var/lib/update-notifier/updates-available) |
| ; - false: universal format (format: A;B) |
| ; A: total packages to update |
| ; B: security packages to update |
| ; |
| UBUNTU_LANDSCAPE_FORMAT=true |
| |
| ; define the update info file. The default is: /var/lib/update-notifier/updates-available |
| ; |
| FILE="/var/lib/update-notifier/updates-available" |
| |
| |
| [uprecords] |
| ; Uprecords Plugin configuration |
| |
| ; define how to access the uprecords statistic data |
| ; - "command" uprecords command is run everytime the block gets refreshed or build |
| ; if access error try execute first: chmod 4755 /usr/bin/uprecords |
| ; This method is not recommended for safety reasons! |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "uprecords.txt"; content is the output from "TZ=GMT uprecords -a -w") |
| ; |
| ACCESS="command" |
| |
| ; define the maximum number of entries to show (for command access) |
| ; default is 10 |
| ; |
| MAX_ENTRIES = 10 |
| |
| ; define the short mode (do not print extra statistics) |
| ; default is false |
| ; |
| SHORT_MODE = false |
| |
| ; denote current system session by asterisk (* at the end) instead by the arrow (-> at the beginning) |
| ; default is false |
| ; |
| DENOTE_BY_ASTERISK = false |
| |
| |
| [iptables] |
| ; Iptables Plugin configuration |
| |
| ; define how to access the iptables rules data |
| ; - "command" iptables-save command is run everytime the block gets refreshed or build |
| ; if access error try to set: SUDO_COMMANDS="iptables-save" and add to file /etc/sudoers line: apache ALL = (ALL) NOPASSWD: /sbin/iptables-save |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation with the filename "iptables.txt"; content is the output from "iptables-save") |
| ; |
| ACCESS="command" |
| |
| |
| [pingtest] |
| ; PingTest Plugin configuration |
| |
| ; define how to access the psstatus statistic data |
| ; - "command" ping command is run everytime the block gets refreshed or build |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "pingtest.txt") |
| ; |
| ACCESS="command" |
| |
| ;define the Addresses |
| ; |
| ; string contains a list of addresses that are checked |
| ; Example : ADDRESSES="127.0.0.1,8.8.8.8" |
| ; |
| ADDRESSES="" |
| |
| ; Define ping timeout in seconds |
| ; - 0 : default ping command timeout |
| ; - 3 : 3 seconds |
| ; Default is 2 seconds |
| ; |
| TIMEOUT=2 |
| |
| [stablebit] |
| ; StableBit Plugin configuration |
| |
| ; Show or hide disks serial number |
| ; |
| SHOW_SERIAL=false |
| |
| [hyperv] |
| ; HyperV Plugin configuration |
| |
| ; define how to access the ps statistic data |
| ; - "command" information is retrieved through WMI |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "hyperv.txt") |
| ; |
| ACCESS="command" |
| |
| [docker] |
| ; Docker Plugin configuration |
| |
| ; define how to access the docker statistic data |
| ; - "command" docker command is run everytime the block gets refreshed or build |
| ; - "data" (a file must be available in the data directory of the phpsysinfo installation |
| ; with the filename "docker.txt"; content is the output from "docker stats --no-stream --format 'table {{.Name}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.MemPerc}}\t{{.NetIO}}\t{{.BlockIO}}\t{{.PIDs}}'") |
| ; |
| ACCESS="command" |