WebSVN – ALCASAR – Diff – /alcasar.sh


#!/bin/bash
#  $Id: alcasar.sh 2739 2019-06-06 22:11:37Z rexy $
 
# alcasar.sh
# ALCASAR is a Free and open source NAC created by Franck BOUIJOUX (3abtux), Pascal LEVANT and Richard REY (Rexy)
# This script is distributed under the Gnu General Public License (GPL)
#  team@alcasar.net
 
# ALCASAR Install script -  CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]
# Ce programme est un logiciel libre ; This software is free and open source
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
# Voir la Licence Publique Générale GNU pour plus de détails.
 
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :
 
# Coovachilli, freeradius, mariaDB, lighttpd, netfilter, e2guardian, ntpd, openssl, dnsmasq, unbound, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump
 
# Options :
#       -i or --install
#       -u or --uninstall
 
# Functions :
#	testing			: connectivity tests, free space test and mageia version test
#	init			: Installation of RPM and scripts
#	network			: Network parameters
#	ACC				: ALCASAR Control Center installation
#	CA				: Certification Authority initialization
#	time_server		: NTPd configuration
#	init_db			: Initilization of radius database managed with MariaDB
#	freeradius		: FreeRadius initialisation
#	chilli			: coovachilli initialisation (+authentication page)
#	e2guardian		: E2Guardian filtering HTTP proxy configuration
#	antivirus		: HAVP + libclamav configuration
#	tinyproxy		: little proxy for user filtered with "WL + antivirus" and "antivirus"
#	ulogd			: log system in userland (match NFLOG target of iptables)
#	nfsen			: Configuration of Nfsen Netflow grapher
#	unbound			: Name server configuration
#	dnsmasq			: Name server configuration (for whitelist ipset support)
#	vnstat			: little network stat daemon
#	BL				: Adaptation of Toulouse University BlackList : split into 3 BL (for unbound, for e2guardian and for Netfilter)
#	cron			: Logs export + watchdog + connexion statistics
#	fail2ban		: Fail2ban IDS installation and configuration
#	gammu_smsd		: Autoregister addon via SMS (gammu-smsd)
#	msec			: Mandriva security package configuration
#	letsencrypt		: Let's Encrypt client
#	post_install	: Security, log rotation, etc.
 
DEBUG_ALCASAR='off'; export DEBUG_ALCASAR	# Debug mode = wait (hit key) after each function
DATE=`date '+%d %B %Y - %Hh%M'`
DATE_SHORT=`date '+%d/%m/%Y'`
Lang=`echo $LANG|cut -c 1-2`
mode="install"
# ******* Files parameters - paramètres fichiers *********
DIR_INSTALL=`pwd`						# current directory
DIR_CONF="$DIR_INSTALL/conf"			# install directory (with conf files)
DIR_SCRIPTS="$DIR_INSTALL/scripts"		# install directory (with script files)
DIR_BLACKLIST="$DIR_INSTALL/blacklist"	# install directory (with blacklist files)
DIR_SAVE="/var/Save"					# backup directory (traceability_log, user_db, security_log)
DIR_WEB="/var/www/html"					# directory of Lighttpd
DIR_DG="/etc/e2guardian"				# directory of E2Guardian
DIR_ACC="$DIR_WEB/acc"					# directory of the 'ALCASAR Control Center'
DIR_DEST_BIN="/usr/local/bin"			# directory of ALCASAR scripts
DIR_DEST_ETC="/usr/local/etc"			# directory of ALCASAR conf files
DIR_DEST_SHARE="/usr/local/share"		# directory of share files used by ALCASAR (unbound for instance)
CONF_FILE="$DIR_DEST_ETC/alcasar.conf"	# central ALCASAR conf file
PASSWD_FILE="/root/ALCASAR-passwords.txt"	# text file with the passwords and shared secrets
# ******* DBMS parameters - paramètres SGBD ********
DB_RADIUS="radius"						# database name used by FreeRadius server
DB_USER="radius"						# user name allows to request the users database
DB_GAMMU="gammu"						# database name used by Gammu-smsd
# ******* Network parameters - paramètres réseau *******
HOSTNAME="alcasar"						# default hostname
DOMAIN="localdomain"					# default local domain
EXTIF=''								# EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
INTIF=''								# INTIF is connected to the consultation network
MTU="1500"
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24"	# Default ALCASAR IP address
# ****** Paths - chemin des commandes *******
SED="/bin/sed -i"
# ****************** End of global parameters *********************
 
license()
{
	if [ $Lang == "fr" ]
	then
		cat $DIR_INSTALL/gpl-warning.fr.txt | more
	else
		cat $DIR_INSTALL/gpl-warning.txt | more
	fi
	response=0
	PTN='^[oOyYnN]$'
	until [[ $(expr $response : $PTN) -gt 0 ]]
	do
		if [ $Lang == "fr" ]
			then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
			else echo -n "Do you accept the terms of this license (Y/n)? : "
		fi
		read response
	done
	if [ "$response" = "n" ] || [ "$response" = "N" ]
	then
		exit 1
	fi
} # End of license()
 
header_install()
{
	clear
	echo "-----------------------------------------------------------------------------"
	echo "                     ALCASAR V$VERSION Installation"
	echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
	echo "-----------------------------------------------------------------------------"
} # End of header_install()
 
########################################################
##                  Function "testing"                ##
## - Test Mageia version                              ##
## - Test ALCASAR version (if already installed)      ##
## - Test free space on /var  (>10G)                  ##
## - Test Internet access                             ##
########################################################
testing()
{
# Test of Mageia version
# extract the current Mageia version and hardware architecture (i586 ou X64)
	fic=`cat /etc/product.id`
	unknown_os=0
	old="$IFS"
	IFS=","
	set $fic
	for i in "$@"
	do
		if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
			then
			DISTRIBUTION=`echo $i|cut -d"=" -f2`
			unknown_os=`expr $unknown_os + 1`
		fi
		if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
			then
			CURRENT_VERSION=`echo $i|cut -d"=" -f2`
			unknown_os=`expr $unknown_os + 1`
		fi
		if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
			then
			ARCH=`echo $i|cut -d"=" -f2`
			unknown_os=`expr $unknown_os + 1`
		fi
	done
	if [ "$ARCH" != "x86_64" ]
		then
		if [ $Lang == "fr" ]
			then echo "Votre architecture matérielle doit être en 64bits"
			else echo "You hardware architecture must be 64bits"
		fi
		exit 1
	fi
	IFS="$old"
	if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "6" ) ]]
	then
		if [ -e /var/tmp/alcasar-conf.tar.gz ] # update
			then
			echo
			if [ $Lang == "fr" ]
				then
				echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
				echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"
				echo "2 - Installez Linux-Mageia 6.0 (64bits) et ALCASAR (cf. doc d'installation)"
				echo "3 - Importez votre base des usagers"
			else
				echo "The automatic update of ALCASAR can't be performed."
				echo "1 - Save your traceability files and the user database"
				echo "2 - Install Linux-Mageia 6 (64bits) & ALCASAR (cf. installation doc)"
				echo "3 - Import your users database"
			fi
		else
			if [ $Lang == "fr" ]
				then echo "L'installation d'ALCASAR ne peut pas être réalisée."
				else echo "The installation of ALCASAR can't be performed."
			fi
		fi
		echo
		if [ $Lang == "fr" ]
			then echo "Le système d'exploitation doit être remplacé (Mageia6-64bits)"
			else echo "The OS must be replaced (Mageia6-64bits)"
		fi
		exit 1
	fi
 
# Test if ALCASAR is already installed
	if [ -e $CONF_FILE ]
	then
		current_version=`grep ^VERSION= $CONF_FILE | cut -d"=" -f2`
		if [ $Lang == "fr" ]
			then echo "La version $current_version d'ALCASAR est déjà installée"
			else echo "ALCASAR version $current_version is already installed"
		fi
		response=0
		PTN='^[12]$'
		until [[ $(expr $response : $PTN) -gt 0 ]]
		do
			if [ $Lang == "fr" ]
				then echo -n "Tapez '1' pour une mise à jour; Tapez '2' pour une réinstallation : "
				else echo -n "Hit '1' for an update; Hit '2' for a reinstallation : "
			fi
			read response
		done
		if [ "$response" = "2" ]
		then
			rm -f /var/tmp/alcasar-conf*
		else
# Retrieve former NICname
			EXTIF_saved=`grep ^EXTIF= $CONF_FILE | cut -d'=' -f2-`	# EXTernal InterFace
			INTIF_saved=`grep ^INTIF= $CONF_FILE | cut -d'=' -f2-`	# INTernal InterFace
			[ "$(/usr/sbin/ip link | grep -c " $EXTIF_saved:")" -ne 0 ] && EXTIF=$EXTIF_saved || echo "Warning: Network card \"$EXTIF_saved\" is not connected, so \"$EXTIF\" will be used for external network."
			[ "$(/usr/sbin/ip link | grep -c " $INTIF_saved:")" -ne 0 ] && INTIF=$INTIF_saved || echo "Warning: Network card \"$INTIF_saved\" is not connected, so \"$INTIF\" will be used for internal network."
# Create the current conf file
			$DIR_SCRIPTS/alcasar-conf.sh --create
			mode="update"
		fi
	fi
# Test free space on /var
	if [ ! -d /var/log/netflow/porttracker ]
		then
		free_space=`df -BG --output=avail /var|tail -1|tr -d '[:space:]G'`
		if [ $free_space -lt 10 ]
			then
			if [ $Lang == "fr" ]
				then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
				else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
			fi
		exit 0
		fi
	fi
 
# Detect external/internal interfaces
	if [ -z "$EXTIF" ]; then
		EXTIF=$(/usr/sbin/ip route list | awk '/^default / {print $5}')
		if [ -z "$EXTIF" ]; then
			if [ "$Lang" == 'fr' ]
				then echo -n "Aucune passerelle par défaut configurée"
				else echo -n "No default gateway configured"
			fi
			exit 1
		fi
	fi
	if [ "$Lang" == 'fr' ]
		then echo "Interface externe (Internet) utilisée : $EXTIF"
		else echo "External interface (Internet) used: $EXTIF"
	fi
 
	if [ -z "$INTIF" ]; then
		interfacesList=$(/usr/sbin/ip -br link show | cut -d' ' -f1 | grep -v "^\(lo\|tun0\|$EXTIF\)\$")
		interfacesCount=$(echo "$interfacesList" | wc -w)
		if [ $interfacesCount -eq 0 ]; then
			if [ "$Lang" == 'fr' ]
				then echo "Aucune interface de disponible pour le réseau interne"
				else echo "No interface available for the internal network"
			fi
			exit 1
		elif [ $interfacesCount -eq 1 ]; then
			INTIF="$interfacesList"
		else
			interfacesSorted=$(/usr/sbin/ip -br addr | grep -v "^\(lo\|tun0\|$EXTIF\) " | sort -b -k3n -k2r -k1)
			interfacePreferred=$(echo "$interfacesSorted" | head -1 | cut -d' ' -f1)
			if [ "$Lang" == 'fr' ]
				then echo 'Liste des interfaces disponible :'
				else echo 'List of available interfaces:'
			fi
			echo "$interfacesSorted"
			response=''
			while true; do
				if [ "$Lang" == 'fr' ]
					then echo -n "Choix de l'interface interne ? [$interfacePreferred] "
					else echo -n "Choice of internal interface ? [$interfacePreferred] "
				fi
				read response
 
				[ -z "$response" ] && response="$interfacePreferred"
 
				# Check if interface exist
				if [ "$(echo "$interfacesList" | grep -c "^$response\$")" -eq 1 ]; then
					INTIF="$response"
					break
				else
					if [ "$Lang" == 'fr' ]
						then echo "Interface \"$response\" introuvable"
						else echo "Interface \"$response\" not found"
					fi
				fi
			done
		fi
	fi
	if [ "$Lang" == 'fr' ]
		then echo "Interface interne utilisée : $INTIF"
		else echo "Internal interface used: $INTIF"
	fi
 
	if [ $Lang == "fr" ]
		then echo -n "Tests des paramètres réseau : "
		else echo -n "Network parameters tests: "
	fi
# Remove conf file if NIC is not plugged (ie : GSM/WIFI/Bt dongles)
	cd /etc/sysconfig/network-scripts/ || { echo "Unable to find /etc/sysconfig/network-scripts directory"; exit 1; }
	IF_INTERFACES=`ls ifcfg-*|cut -d"-" -f2|grep -v "^lo"|cut -d"*" -f1`
	for i in $IF_INTERFACES
	do
		if [ "$(/usr/sbin/ip link | grep -c " $i:")" -eq 0 ]; then
			rm -f ifcfg-$i
 
			if [ $Lang == "fr" ]
				then echo "Suppression : ifcfg-$i"
				else echo "Deleting: ifcfg-$i"
			fi
		fi
	done
	cd $DIR_INSTALL || { echo "Unable to find $DIR_INSTALL directory"; exit 1; }
	echo -n "."
# Test Ethernet NIC links state
	interfacesDown=$(/usr/sbin/ip -br link | grep "^\($EXTIF\|$INTIF\) " | grep 'NO-CARRIER' | cut -d' ' -f1)
	if [ ! -z "$interfacesDown" ]; then
		for i in $interfacesDown; do
			if [ $Lang == "fr" ]
			then
				echo -e "\nÉchec"
				echo "Le lien réseau de la carte $i n'est pas actif."
				echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
			else
				echo -e "\nFailed"
				echo "The link state of $i interface is down."
				echo "Make sure that this network card is connected to a switch or an A.P."
			fi
		done
		exit 1
	fi
	echo -n "."
# Test EXTIF config files
	PUBLIC_IP_MASK=`/usr/sbin/ip addr show $EXTIF | grep '^\s*inet\s' | awk '{ print $2 }'`
	PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d'/' -f1`
	PUBLIC_GATEWAY=`/usr/sbin/ip route list | awk -v EXTIF="$EXTIF" '(/^default / && $5 == EXTIF) {print $3}'`
	if [ "$(echo $PUBLIC_IP|wc -c)" -lt 7 ] || [ "$(echo $PUBLIC_GATEWAY|wc -c)" -lt 7 ]
	then
		if [ $Lang == "fr" ]
		then
			echo -e "\nÉchec"
			echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
			echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
			echo "Appliquez les changements : 'systemctl restart network'"
		else
			echo -e "\nFailed"
			echo "The Internet connected network card ($EXTIF) isn't well configured."
			echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
			echo "Apply the new configuration: 'systemctl restart network'"
		fi
		echo "DEVICE=$EXTIF"
		echo "IPADDR="
		echo "NETMASK="
		echo "GATEWAY="
		echo "DNS1="
		echo "DNS2="
		echo "ONBOOT=yes"
		exit 1
	fi
	echo -n "."
# Test if default GW is set on EXTIF (router or ISP provider equipment)
	if [ "$(/usr/sbin/ip route list|grep " $EXTIF "|grep -c '^default ')" -ne 1 ] ; then
		if [ $Lang == "fr" ]
		then
			echo -e "\nÉchec"
			echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
			echo "Réglez ce problème puis relancez ce script."
		else
			echo -e "\nFailed"
			echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
			echo "Resolv this problem, then restart this script."
		fi
		exit 1
	fi
	echo -n "."
# Test if default GW is alive
	arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
	if [ "$(expr $arp_reply)" -eq 0 ]
		then
		if [ $Lang == "fr" ]
		then
			echo -e "\nÉchec"
			echo "Le routeur de sortie ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
			echo "Réglez ce problème puis relancez ce script."
		else
			echo -e "\nFailed"
			echo "The Internet gateway or the ISP equipment ($PUBLIC_GATEWAY) doesn't answered."
			echo "Resolv this problem, then restart this script."
		fi
		exit 1
	fi
	echo -n "."
# Test Internet connectivity
	domainTested='www.google.com'
	/usr/bin/curl -s --head "$domainTested" &>/dev/null
	if [ $? -ne 0 ]; then
		if [ $Lang == "fr" ]
		then
			echo -e "\nLa tentative de connexion vers Internet a échoué ($domainTested)."
			echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
			echo "Vérifiez la validité des adresses IP des DNS."
		else
			echo -e "\nThe Internet connection try failed ($domainTested)."
			echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
			echo "Verify the DNS IP addresses"
		fi
		exit 1
	fi
	echo ". : ok"
} # End of testing()
 
#######################################################################
##                    Function "init"                                ##
## - Creation of ALCASAR conf file "/usr/local/etc/alcasar.conf      ##
## - Creation of random password for GRUB, mariadb (admin and user)  ##
#######################################################################
init()
{
	if [ "$mode" != "update" ]
	then
# On affecte le nom d'organisme
		header_install
		ORGANISME=!
		PTN='^[a-zA-Z0-9-]*$'
		until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
		do
			if [ $Lang == "fr" ]
				then echo -n "Entrez le nom de votre organisme : "
				else echo -n "Enter the name of your organism : "
			fi
			read ORGANISME
			if [ "$ORGANISME" == "" ]
			then
				ORGANISME=!
			fi
		done
	fi
# On crée aléatoirement les mots de passe et les secrets partagés
# We create random passwords and shared secrets
	rm -f $PASSWD_FILE
	echo "#####  ALCASAR ($ORGANISME) security passwords  #####" > $PASSWD_FILE
	grub2pwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c8`
	pbkdf2=`( echo $grub2pwd ; echo $grub2pwd ) | \
		LC_ALL=C /usr/bin/grub2-mkpasswd-pbkdf2 | \
		grep -v '[eE]nter password:' | \
		sed -e "s/PBKDF2 hash of your password is //"`
	echo "GRUB2_PASSWORD=$pbkdf2" > /boot/grub2/user.cfg
	[ -e /root/grub.default ] || cp /etc/grub.d/10_linux /root/grub.default
	cp -f $DIR_CONF/grub-10_linux /etc/grub.d/10_linux  # Request password only on menu editing attempts (not when selecting an entry)
	chmod 0600 /boot/grub2/user.cfg
	echo "# Login name and password to protect GRUB2 boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
	echo "GRUB2_user=root" >> $PASSWD_FILE
	echo "GRUB2_password=$grub2pwd" >> $PASSWD_FILE
	mysqlpwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
	echo "# Login name and Password of MariaDB administrator:" >> $PASSWD_FILE
	echo "db_root=$mysqlpwd" >> $PASSWD_FILE
	radiuspwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
	echo "# Login name and password of MariaDB user:" >> $PASSWD_FILE
	echo "db_user=$DB_USER" >> $PASSWD_FILE
	echo "db_password=$radiuspwd" >> $PASSWD_FILE
	secretuam=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
	echo "# Shared secret between the script 'intercept.php' and coova-chilli:" >> $PASSWD_FILE
	echo "secret_uam=$secretuam" >> $PASSWD_FILE
	secretradius=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
	echo "# Shared secret between coova-chilli and FreeRadius:" >> $PASSWD_FILE
	echo "secret_radius=$secretradius" >> $PASSWD_FILE
	chmod 640 $PASSWD_FILE
#  copy scripts in in /usr/local/bin
	cp -fr $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown -R root:root $DIR_DEST_BIN/alcasar* ; chmod -R 740 $DIR_DEST_BIN/alcasar*
#  copy conf files in /usr/local/etc
	cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*
	$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
# generate central conf file
	cat <<EOF > $CONF_FILE
##########################################
##                                      ##
##          ALCASAR Parameters          ##
##                                      ##
##########################################
 
INSTALL_DATE=$DATE
VERSION=$VERSION
ORGANISM=$ORGANISME
EOF
	chmod o-rwx $CONF_FILE
} # End of init()
 
#########################################################
##                    Function "network"               ##
## - Define the several network address                ##
## - Define the DNS naming                             ##
## - INTIF parameters (consultation network)           ##
## - Write "/etc/hosts" file                           ##
## - write "hosts.allow" & "hosts.deny" files          ##
#########################################################
network()
{
	header_install
	if [ "$mode" != "update" ]
		then
		if [ $Lang == "fr" ]
			then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
			else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
		fi
		response=0
		PTN='^[oOyYnN]$'
		until [[ $(expr $response : $PTN) -gt 0 ]]
		do
			if [ $Lang == "fr" ]
				then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
				else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
			fi
			read response
		done
		if [ "$response" = "n" ] || [ "$response" = "N" ]
		then
			PRIVATE_IP_MASK="0"
			PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
			until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
			do
				if [ $Lang == "fr" ]
					then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
					else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
				fi
				read PRIVATE_IP_MASK
			done
		else
			PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
		fi
	else
		PRIVATE_IP_MASK=`grep ^PRIVATE_IP= conf/etc/alcasar.conf|cut -d"=" -f2`
		rm -f conf/etc/alcasar.conf
	fi
	header_install
	if [ "$mode" != "update" ]
		then
		if [ $Lang == "fr" ]
			then echo "Par défaut, le nom d'hôte d'ALCASAR est : $HOSTNAME.$DOMAIN"
			else echo "The default ALCASAR hostname is : $HOSTNAME.$DOMAIN"
		fi
		response=0
		PTN='^[oOyYnN]$'
		until [[ $(expr $response : $PTN) -gt 0 ]]
		do
			if [ $Lang == "fr" ]
				then echo -n "Voulez-vous utiliser ce nom d'hôte (recommandé) (O/n)? : "
				else echo -n "Do you want to use this hostname (recommanded) (Y/n)? : "
			fi
			read response
		done
		if [ "$response" = "n" ] || [ "$response" = "N" ]
		then
			if [ $Lang == "fr" ]
				then echo -n "Entrez le nouveau nom d'hôte pleinement qualifié (hôte.domain) : "
				else echo -n "Enter the new full qualified hostname (host.domain) : "
			fi
			read FQDN
			HOSTNAME=`echo $FQDN|cut -d"." -f1`
			DOMAIN=`echo $FQDN|cut -d"." -f2`
		fi
	fi
# Define LAN side global parameters
	hostnamectl set-hostname $HOSTNAME.$DOMAIN
	PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network address (ie.: 192.168.182.0)
	private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4`					# last octet of LAN address
	PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network mask (ie.: 255.255.255.0)
	PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2`					# network prefix (ie. 24)
	PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1`						# ALCASAR private ip address (consultation LAN side)
	if [ $PRIVATE_IP == $PRIVATE_NETWORK ]								# when entering network address instead of ip address
	then
		PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`
		PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
	fi
	private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4`						# last octet of LAN address
	PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1`		# second network address (ex.: 192.168.182.2)
	PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX						# ie.: 192.168.182.0/24
	classe=$((PRIVATE_PREFIX/8))									# ie.: 2=classe B, 3=classe C
	PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`.				# compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
	PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'` 	# MAC address of INTIF
# Define Internet parameters
	if [ "$mode" != "update" ]
	then
		DNS1=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS1='| cut -d"=" -f2`	# 1st DNS server
		DNS2=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS2=' | cut -d"=" -f2`	# 2nd DNS server
	else
		DNS1=`cat /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF | grep '^DNS1=' | cut -d"=" -f2`	# 1st DNS server
		DNS2=`cat /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF | grep '^DNS2=' | cut -d"=" -f2`	# 2nd DNS server
	fi
    DNS1=${DNS1:=208.67.220.220}
	DNS2=${DNS2:=208.67.222.222}
#	if [ "$DNS1" == "" ]
#	then
#		if [ $Lang == "fr" ]
#		then
#			echo "L'adresse IP des serveurs DNS ne sont pas corrects"
#			echo "Vérifiez la configuration de la carte réseau externe ($EXTIF)"
#		else
#			echo "The IP address of DNS servers are not set correctly"
#			echo "Check the extern network card configuration ($EXTIF)"
#		fi
#		exit 0
#	fi
	PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
	PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
	PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
# Write network parameters in the conf file
	echo "HOSTNAME=$HOSTNAME" >> $CONF_FILE
	echo "DOMAIN=$DOMAIN" >> $CONF_FILE
	echo "EXTIF=$EXTIF" >> $CONF_FILE
	echo "INTIF=$INTIF" >> $CONF_FILE
	######## Récupération des interfaces du ou des réseaux de consultation supplémentaires #################
	INTERFACES=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "^lo\|$EXTIF\|tun0"|cut -d " " -f2|tr -d ":"`
	for i in $INTERFACES
	do
		SUB=`echo ${i:0:2}`
		if [ $SUB = "wl" ]
			then WIFIF=$i
		elif [ "$i" != "$INTIF" ] && [ $SUB != "ww" ]
			then LANIF=$i
		fi
	done
	if [ -n "$WIFIF" ]
		then echo "WIFIF=$WIFIF" >> $CONF_FILE
	elif [ -n "$LANIF" ]
		then echo "LANIF=$LANIF" >> $CONF_FILE
	fi
	#########################################################################################################
	IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2` # test static or dynamic
	if [ $IP_SETTING == "dhcp" ]
	then
		echo "PUBLIC_IP=dhcp" >> $CONF_FILE
		echo "GW=dhcp" >> $CONF_FILE
	else
		echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
		echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
	fi
	echo "DNS1=$DNS1" >> $CONF_FILE
	echo "DNS2=$DNS2" >> $CONF_FILE
	echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
	echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
	echo "DHCP=on" >> $CONF_FILE
	echo "EXT_DHCP_IP=" >> $CONF_FILE
	echo "RELAY_DHCP_IP=" >> $CONF_FILE
	echo "RELAY_DHCP_PORT=" >> $CONF_FILE
	echo "INT_DNS_DOMAIN=" >> $CONF_FILE
	echo "INT_DNS_IP=" >> $CONF_FILE
	echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
# network default
	[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
	cat <<EOF > /etc/sysconfig/network
NETWORKING=yes
FORWARD_IPV4=true
EOF
# write "/etc/hosts"
	[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
	cat <<EOF > /etc/hosts
127.0.0.1	localhost
$PRIVATE_IP	$HOSTNAME
EOF
# write EXTIF (Internet) config
	[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
	if [ $IP_SETTING == "dhcp" ]
	then
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=dhcp
DNS1=127.0.0.1
PEERDNS=no
RESOLV_MODS=yes
ONBOOT=yes
NOZEROCONF=yes
METRIC=10
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
	else
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=static
IPADDR=$PUBLIC_IP
NETMASK=$PUBLIC_NETMASK
GATEWAY=$PUBLIC_GATEWAY
DNS1=127.0.0.1
RESOLV_MODS=yes
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
	fi
# write INTIF (consultation LAN) in normal mode
	cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
	cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
# write INTIF in bypass mode (see "alcasar-bypass.sh")
	cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
IPADDR=$PRIVATE_IP
NETMASK=$PRIVATE_NETMASK
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
######### Config WIFIF (consultation WIFI) ou LANIF (consultation LAN) in normal mode #################
	if [ -n "$WIFIF" ] && [ "$WIFIF" != "$INTIF" ]
	then
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$WIFIF
DEVICE=$WIFIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
	elif [ -n "$LANIF" ]
	then
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$LANIF
DEVICE=$LANIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
	fi
	#########################################################################################################
# write hosts.allow & hosts.deny
	[ -e /etc/hosts.allow.default ]  || cp /etc/hosts.allow /etc/hosts.allow.default
	cat <<EOF > /etc/hosts.allow
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
sshd: ALL
ntpd: $PRIVATE_NETWORK_SHORT
EOF
	[ -e /etc/host.deny.default ]  || cp /etc/hosts.deny /etc/hosts.deny.default
	cat <<EOF > /etc/hosts.deny
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
EOF
	chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
	echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
# load conntrack ftp module
	[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
	echo "nf_conntrack_ftp" >>  /etc/modprobe.preload
# load ipt_NETFLOW module
	echo "ipt_NETFLOW" >>  /etc/modprobe.preload
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
	[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
	$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
	[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
	$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
#
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
} # End of network()
 
###################################################
##                  Function "ACC"               ##
## - copy ALCASAR Control Center (ACC) files     ##
## - configuration of the web server (Lighttpd)  ##
## - creation of the first ACC admin account     ##
## - secure the ACC access                       ##
###################################################
ACC()
{
	[ -d $DIR_WEB ] && rm -rf $DIR_WEB
	mkdir $DIR_WEB
# Copy & adapt ACC files
	cp -rf $DIR_INSTALL/web/* $DIR_WEB/
	$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
	$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
	$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
	$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
	chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
	chown -R apache:apache $DIR_WEB/*
# copy & adapt "freeradius-web" files
	cp -rf $DIR_CONF/freeradius-web/ /etc/
	[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
	$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
	$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
	$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
	cat <<EOF > /etc/freeradius-web/naslist.conf
nas1_name: alcasar-$ORGANISME
nas1_model: Network Access Controler
nas1_ip: $PRIVATE_IP
nas1_port_num: 0
nas1_community: public
EOF
	chown -R apache:apache /etc/freeradius-web/
# create the log & backup structure :
# - base = users database
# - archive = tarball of "base + http firewall + netflow"
# - security = watchdog log
	for i in base archive security activity_report;
	do
		[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
	done
	chown -R root:apache $DIR_SAVE
# Configuring & securing php
	[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
	timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
	$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
	$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
	$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
	$SED "s?^display_errors.*?display_errors = Off?" /etc/php.ini
	$SED "s?^display_startup_errors.*?display_startup_errors = Off?" /etc/php.ini
	$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
	$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
	$SED "s?^allow_url_fopen.*?allow_url_fopen = Off?" /etc/php.ini
# Configuring & securing Lighttpd
	rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
	[ -e /etc/lighttpd/lighttpd.conf.default ] || cp /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.default
	$SED "s?^server\.use-ipv6.*?server\.use-ipv6 = \"disable\"?g" /etc/lighttpd/lighttpd.conf
	$SED "s?^#server\.bind.*?server\.bind = \"$PRIVATE_IP\"?g" /etc/lighttpd/lighttpd.conf
	$SED "s?^server\.bind.*?server\.bind = \"$PRIVATE_IP\"?g" /etc/lighttpd/lighttpd.conf
	$SED "s?^#server\.tag.*?server\.tag = \"\"?g" /etc/lighttpd/lighttpd.conf
	echo "include \"vhosts.d/alcasar.conf\"" >> /etc/lighttpd/lighttpd.conf
 
	[ -e /etc/lighttpd/modules.conf.default ] || cp /etc/lighttpd/modules.conf /etc/lighttpd/modules.conf.default
	$SED "s?^#[ ]*\"mod_auth\",.*? \"mod_auth\",?g" /etc/lighttpd/modules.conf
	$SED "s?^#[ ]*\"mod_alias\",.*? \"mod_alias\",?g" /etc/lighttpd/modules.conf
	$SED "s?^#[ ]*\"mod_redirect\",.*? \"mod_redirect\",?g" /etc/lighttpd/modules.conf
	$SED "s?^#include \"conf.d/fastcgi.conf\".*?include \"conf.d/fastcgi.conf\"?g" /etc/lighttpd/modules.conf
 
	[ -e /etc/lighttpd/conf.d/fastcgi.conf.default ] || cp /etc/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf.default
	cp $DIR_CONF/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf
 
	[ -e /etc/php-fpm.conf.default ] || cp /etc/php-fpm.conf /etc/php-fpm.conf.default
	$SED "s?^;listen\.owner.*?listen\.owner = apache?g" /etc/php-fpm.conf
	$SED "s?^;listen\.group.*?listen\.group = apache?g" /etc/php-fpm.conf
	$SED "s?^;listen\.mode.*?listen\.mode = 0660?g" /etc/php-fpm.conf
 
 
 
	[ -d /etc/lighttpd/vhosts.d ] || mkdir /etc/lighttpd/vhosts.d
	cp $DIR_CONF/lighttpd/vhosts.d/* /etc/lighttpd/vhosts.d/
	$SED 's/^$SERVER\["socket"\] == ".*:443.*/$SERVER\["socket"\] == "'"$PRIVATE_IP"':443" {/g' /etc/lighttpd/vhosts.d/alcasar-with-ssl.conf
	$SED 's/^$SERVER\["socket"\] == ".*:443.*/$SERVER\["socket"\] == "'"$PRIVATE_IP"':443" {/g' /etc/lighttpd/vhosts.d/alcasar-without-ssl.conf
	$SED "s/^\([\t ]*\)var.server_name.*/\1var.server_name = \"$PRIVATE_IP\"/g" /etc/lighttpd/vhosts.d/alcasar-with-ssl.conf
	$SED "s/^\([\t ]*\)var.server_name.*/\1var.server_name = \"$PRIVATE_IP\"/g" /etc/lighttpd/vhosts.d/alcasar-without-ssl.conf
	ln -s /etc/lighttpd/vhosts.d/alcasar-with-ssl.conf /etc/lighttpd/vhosts.d/alcasar.conf
 
	[ -d /var/log/lighttpd ] || mkdir /var/log/lighttpd
	[ -e /var/log/lighttpd/access.log ] || touch /var/log/lighttpd/access.log
	[ -e /var/log/lighttpd/error.log ] || touch /var/log/lighttpd/error.log
 
	chown -R apache:apache /var/log/lighttpd
	/usr/bin/systemctl start lighttpd
	/usr/bin/systemctl start php-fpm
 
# Creation of the first account (in 'admin' profile)
	if [ "$mode" = "install" ]
	then
		header_install
# Creation of keys file for the admin account ("admin")
		[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
		mkdir -p $DIR_DEST_ETC/digest
		chmod 755 $DIR_DEST_ETC/digest
		if [ $Lang == "fr" ]
			then echo -n "Création du premier compte administrateur : "
			else echo -n "Creation of the first admin account : "
		fi
		until [ -s $DIR_DEST_ETC/digest/key_admin ]
		do
			$DIR_DEST_BIN/alcasar-profil.sh --add admin
		done
	fi
 
	# Run lighttpd after coova (in order waiting tun0 to be up)
	$SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/lighttpd.service
	# Log file for ACC access imputability
	[ -e /var/Save/security/acc_access.log ] || touch /var/Save/security/acc_access.log
	chown root:apache /var/Save/security/acc_access.log
	chmod 664 /var/Save/security/acc_access.log
} # End of ACC()
 
##################################################################
##                               Fonction "CA"                  ##
## - Creating the CA and the server certificate (lighttpd)      ##
##################################################################
CA()
{
	$DIR_DEST_BIN/alcasar-CA.sh
	chown -R root:apache /etc/pki
	chmod -R 750 /etc/pki
} # End of CA()
 
#############################################################
##               Function "time_server"                    ##
## - Configuring NTP server                                ##
#############################################################
time_server()
{
# Set the Internet time server
	[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
	cat <<EOF > /etc/ntp/step-tickers
0.fr.pool.ntp.org	# adapt to your country
1.fr.pool.ntp.org
2.fr.pool.ntp.org
EOF
	[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
	cat <<EOF > /etc/ntp.conf
server 0.fr.pool.ntp.org	# adapt to your country
server 1.fr.pool.ntp.org
server 2.fr.pool.ntp.org
server 127.127.1.0   		# local clock si NTP internet indisponible ...
fudge 127.127.1.0 stratum 10
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
restrict 127.0.0.1
driftfile /var/lib/ntp/drift
logfile /var/log/ntp.log
disable monitor
EOF
	chown -R ntp:ntp /var/lib/ntp
# Synchronize now
	ntpd -4 -q -g &
} # End of time_server()
 
#####################################################################
##                     Function "init_db"                          ##
## - Mysql initialization                                          ##
## - Set admin (root) password                                     ##
## - Remove unused users & databases                               ##
## - Radius database creation                                      ##
## - Copy of accounting tables (mtotacct, totacct) & userinfo      ##
#####################################################################
init_db()
{
	if [ "`systemctl is-active mysqld`" == "active" ]
	then
		systemctl stop mysqld
	fi
	rm -rf /var/lib/mysql # to be sure that there is no former installation
	[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
	$SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
	$SED "s?^port.*?#&?g" /etc/my.cnf # we use unix socket only
	$SED "s?^;collation_server =.*?collation_server = utf8_unicode_ci?g" /etc/my.cnf
	$SED "s?^;character_set_server =.*?character_set_server = utf8?g" /etc/my.cnf  # accentuated user names are allowed
	[ -e /etc/my.cnf.d/feedback.cnf ] && $SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/feedback.cnf # remove the feedback plugin (ALCASAR doesn't report anything !)
	[ -e /etc/my.cnf.d/auth_gssapi.cnf ] && $SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/auth_gssapi.cnf # remove GSS plugin (ALCASAR doesn't use Kerberos)
	/usr/sbin/mysqld-prepare-db-dir > /dev/null 2>&1
	/usr/bin/systemctl set-environment MYSQLD_OPTS="--skip-grant-tables --skip-networking"
	/usr/bin/systemctl start mysqld
	nb_round=1
	while [ ! -S /var/lib/mysql/mysql.sock ] && [ $nb_round -lt 10 ] # we wait until mariadb is on
	do
		nb_round=`expr $nb_round + 1`
		sleep 2
	done
	if [ ! -S /var/lib/mysql/mysql.sock ]
	then
		echo "Problème : la base données 'MariaDB' ne s'est pas lancée !"
		exit
	fi
# Secure the server
	/usr/bin/mysql --execute "GRANT ALL PRIVILEGES ON *.* TO root@'localhost' IDENTIFIED BY '$mysqlpwd';"
	MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
	$MYSQL "DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
	$MYSQL "CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;"
# Create 'radius' database
	$MYSQL "CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
# Add an empty radius database structure
	/usr/bin/mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
# modify the start script in order to close accounting connexion when the system is comming down or up
	[ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
	$SED "/^ExecStart=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
	$SED "/^ExecStop=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
	/usr/bin/systemctl unset-environment MYSQLD_OPTS
	/usr/bin/systemctl daemon-reload
} # End of init_db()
 
###################################################################
##                       Function "freeradius"                   ##
## - Set the configuration files                                 ##
## - Set the shared secret between coova-chilli and freeradius   ##
## - Adapt the Mysql conf file and counters                      ##
###################################################################
freeradius()
{
	cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
	chown -R radius:radius /etc/raddb
	[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
# Set radius global parameters (radius.conf)
	$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
	$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
	$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
	$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf # remove the proxy function
	$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf # remove the proxy function
# Add ALCASAR & Coovachilli dictionaries
	[ -e /etc/raddb/dictionary.default ] || cp /etc/raddb/dictionary /etc/raddb/dictionary.default
	cp $DIR_CONF/radius/dictionary.alcasar /etc/raddb/
	echo '$INCLUDE dictionary.alcasar' > /etc/raddb/dictionary
	cp /usr/share/doc/coova-chilli/dictionary.coovachilli /etc/raddb/
	echo '$INCLUDE dictionary.coovachilli' >> /etc/raddb/dictionary
# Set "client.conf" to describe radius clients (coova on 127.0.0.1)
	[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
	cat << EOF > /etc/raddb/clients.conf
client localhost {
	ipaddr = 127.0.0.1
	secret = $secretradius
	shortname = chilli
	nas_type = other
}
EOF
# Set Virtual server (remvove all except "alcasar virtual site")
	rm -f /etc/raddb/sites-enabled/*
	cp $DIR_CONF/radius/alcasar /etc/raddb/sites-available/alcasar
	cp $DIR_CONF/radius/alcasar-with-ldap /etc/raddb/sites-available/alcasar-with-ldap
	chown radius:apache /etc/raddb/sites-available/alcasar*
	chmod 660 /etc/raddb/sites-available/alcasar*
	ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
	# INFO : To connect from outside (EAP), add the EAP virtual server (link in sites-enabled) and inner-tunnel modules (link in mods-enabled)
# Set modules
	# Add custom LDAP "available module"
	cp -f $DIR_CONF/radius/ldap-alcasar /etc/raddb/mods-available/
	chown -R radius:radius /etc/raddb/mods-available/ldap-alcasar
	# Set only usefull modules for ALCASAR (! the module 'ldap-alcasar' is enabled only via ACC)
	rm -rf  /etc/raddb/mods-enabled/*
	for mods in sql sqlcounter attr_filter expiration logintime pap expr always
	do
		ln -s /etc/raddb/mods-available/$mods /etc/raddb/mods-enabled/$mods
	done
	# INFO : To connect from outside (EAP), add the EAP module (and right accesses to the keys (/etc/pki/tls/private/radius.pem)
# Configure SQL mod
	[ -e /etc/raddb/mods-available/sql.default ] || cp /etc/raddb/mods-available/sql /etc/raddb/mods-available/sql.default
	$SED "s?^[\t ]*driver =.*?driver = \"rlm_sql_mysql\"?g" /etc/raddb/mods-available/sql
	$SED "s?^[\t ]*dialect =.*?dialect = \"mysql\"?g" /etc/raddb/mods-available/sql
	$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/mods-available/sql
	$SED "s?^#[\t ]*server =.*?server = \"localhost\"?g" /etc/raddb/mods-available/sql
	$SED "s?^#[\t ]*port =.*?port = \"3306\"?g" /etc/raddb/mods-available/sql
	$SED "s?^#[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/mods-available/sql
	$SED "s?^#[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/mods-available/sql
# queries.conf modifications : case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.
	[ -e /etc/raddb/mods-config/sql/main/mysql/queries.conf.default ] || cp /etc/raddb/mods-config/sql/main/mysql/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf.default
	cp -f $DIR_CONF/radius/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf
	chown -R radius:radius /etc/raddb/mods-config/sql/main/mysql/queries.conf
# sqlcounter modifications
	[ -e /etc/raddb/mods-available/sqlcounter.default ] || cp /etc/raddb/mods-available/sqlcounter /etc/raddb/mods-available/sqlcounter.default
	cp -f $DIR_CONF/radius/sqlcounter /etc/raddb/mods-available/sqlcounter
	chown -R radius:radius /etc/raddb/mods-available/sqlcounter
# make certain that mysql is up before freeradius start
	[ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
	$SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
	/usr/bin/systemctl daemon-reload
# Allow apache to change some conf files (ie : ldap on/off)
	chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/mods-available
} # End of freeradius()
 
#############################################################################
##                           Function "chilli"                             ##
## - Creation of the conf file and init file (systemd) for coova-chilli    ##
## - Adapt the authentication web page (intercept.php)                     ##
#############################################################################
chilli()
{
# chilli unit for systemd
	cat << EOF > /lib/systemd/system/chilli.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
[Unit]
Description=chilli is a captive portal daemon
After=network.target
 
[Service]
Type=forking
ExecStart=/usr/libexec/chilli start
ExecStop=/usr/libexec/chilli stop
ExecReload=/usr/libexec/chilli reload
PIDFile=/var/run/chilli.pid
 
[Install]
WantedBy=multi-user.target
EOF
# init file creation
	[ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
	cat <<EOF > /etc/init.d/chilli
#!/bin/sh
#
# chilli CoovaChilli init
#
# chkconfig: 2345 65 35
# description: CoovaChilli
### BEGIN INIT INFO
# Provides:       chilli
# Required-Start: network
# Should-Start:
# Required-Stop:  network
# Should-Stop:
# Default-Start:  2 3 5
# Default-Stop:
# Description:    CoovaChilli access controller
### END INIT INFO
 
[ -f /usr/sbin/chilli ] || exit 0
. /etc/init.d/functions
CONFIG=/etc/chilli.conf
pidfile=/var/run/chilli.pid
[ -f \$CONFIG ] || {
	echo "\$CONFIG Not found"
	exit 0
}
current_users_file="/var/tmp/havp/current_users.txt"	# file containing active users
RETVAL=0
prog="chilli"
case \$1 in
	start)
		if [ -f \$pidfile ] ; then
			gprintf "chilli is already running"
		else
			gprintf "Starting \$prog: "
			echo '' > \$current_users_file && chown apache:apache \$current_users_file
			rm -f /var/run/chilli* # cleaning
			/usr/sbin/modprobe tun >/dev/null 2>&1
			echo 1 > /proc/sys/net/ipv4/ip_forward
			[ -e /dev/net/tun ] || {
				(cd /dev;
				mkdir net;
				cd net;
				mknod tun c 10 200)
			}
			ifconfig $INTIF 0.0.0.0
			/usr/sbin/ethtool -K $INTIF gro off
			daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
			RETVAL=\$?
		fi
		;;
 
	reload)
		killall -HUP chilli
		;;
 
	restart)
		\$0 stop
		sleep 2
		\$0 start
		;;
 
	status)
		status chilli
		RETVAL=0
		;;
 
	stop)
		if [ -f \$pidfile ] ; then
			gprintf "Shutting down \$prog: "
			killproc /usr/sbin/chilli
			RETVAL=\$?
			[ \$RETVAL = 0 ] && rm -f \$pidfile
			[ -e \$current_users_file ] && rm -f \$current_users_file
		else
			gprintf "chilli is not running"
		fi
		;;
 
	*)
		echo "Usage: \$0 {start|stop|restart|reload|status}"
		exit 1
esac
echo
EOF
	chmod a+x /etc/init.d/chilli
	ln -s /etc/init.d/chilli /usr/libexec/chilli
# conf file creation
	[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
	#NTP Option configuration for DHCP
	#DHCP Options : rfc2132
		#dhcp option value will be convert in hexa.
		#NTP option (or 'option 42') is like :
		#
		#    Code   Len         Address 1               Address 2
		#   +-----+-----+-----+-----+-----+-----+-----+-----+--
		#   |  42 |  n  |  a1 |  a2 |  a3 |  a4 |  a1 |  a2 |  ...
		#   +-----+-----+-----+-----+-----+-----+-----+-----+--
		#
		#Code : 42 => 2a
		#Len : 4 => 04
	PRIVATE_IP_HEXA=$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f1)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f2)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f3)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f4)")
	cat <<EOF > /etc/chilli.conf
# coova config for ALCASAR
cmdsocket	/var/run/chilli.sock
unixipc		chilli.$INTIF.ipc
pidfile		/var/run/chilli.pid
net		$PRIVATE_NETWORK_MASK
dhcpif		$INTIF
ethers		$DIR_DEST_ETC/alcasar-ethers
#nodynip
#statip
dynip		$PRIVATE_NETWORK_MASK
domain		$DOMAIN
dns1		$PRIVATE_IP
dns2		$PRIVATE_IP
uamlisten	$PRIVATE_IP
uamport		3990
uamuiport	3991
macauth
macpasswd	password
strictmacauth
locationname	$HOSTNAME.$DOMAIN
radiusserver1	127.0.0.1
radiusserver2	127.0.0.1
radiussecret	$secretradius
radiusauthport	1812
radiusacctport	1813
uamserver	https://$HOSTNAME.$DOMAIN/intercept.php
redirurl
radiusnasid	$HOSTNAME.$DOMAIN
uamsecret	$secretuam
uamallowed	$HOSTNAME,$HOSTNAME.$DOMAIN
coaport		3799
conup		$DIR_DEST_BIN/alcasar-conup.sh
condown		$DIR_DEST_BIN/alcasar-condown.sh
macup		$DIR_DEST_BIN/alcasar-macup.sh
include		$DIR_DEST_ETC/alcasar-uamallowed
include		$DIR_DEST_ETC/alcasar-uamdomain
dhcpopt		2a04$PRIVATE_IP_HEXA
#dhcpgateway		none
#dhcprelayagent		none
#dhcpgatewayport	none
sslkeyfile	/etc/pki/tls/private/alcasar.key
sslcertfile	/etc/pki/tls/certs/alcasar.crt
redirssl
uamuissl
EOF
# create files for "DHCP static ip" and "DHCP static ip info". Reserve the second IP address for INTIF (the first one is for tun0)
	echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
	echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers-info
# create files for trusted domains and urls
	touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
	chown root:apache $DIR_DEST_ETC/alcasar-*
	chmod 660 $DIR_DEST_ETC/alcasar-*
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
	$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
# user 'chilli' creation (in order to run conup/off and up/down scripts
	chilli_exist=`grep -c ^chilli: /etc/passwd`
	if [ "$chilli_exist" == "1" ]
	then
		userdel -r chilli 2>/dev/null
	fi
	groupadd -f chilli
	useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
}  # End of chilli()
 
################################################################
##                   Function "e2guardian"                    ##
## - Set the parameters of this HTML proxy (as controler)     ##
################################################################
e2guardian()
{
	mkdir -p /var/e2guardian /var/log/e2guardian
	chown -R e2guardian /var/e2guardian /var/log/e2guardian
	$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/e2guardian -c /etc/e2guardian/e2guardian.conf?g" /lib/systemd/system/e2guardian.service
	$SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/e2guardian.service
	[ -e $DIR_DG/e2guardian.conf.default ] || cp $DIR_DG/e2guardian.conf $DIR_DG/e2guardian.conf.default
# By default the filter is off
	$SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/e2guardian.conf
# French deny HTML page
	$SED "s?^language =.*?language = french?g" $DIR_DG/e2guardian.conf
# Listen only on LAN side
	$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/e2guardian.conf
# DG send its flow to HAVP
	$SED "s?^proxyport.*?proxyport = 8090?g" $DIR_DG/e2guardian.conf
# replace the default deny HTML page
	cp -f $DIR_CONF/template.html /usr/share/e2guardian/languages/ukenglish/
	cp -f $DIR_CONF/template-fr.html /usr/share/e2guardian/languages/french/template.html
# Don't log
	$SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/e2guardian.conf
# # Change the default report page
	$SED "s?^accessdeniedaddress =.*?accessdeniedaddress = http://$HOSTNAME.$DOMAIN?g" $DIR_DG/e2guardian.conf
# Disable HTML content control
	$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/e2guardian.conf
	cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
# Disable URL control with regex
	cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
# Configure E2guardian for large site
# Minimum number of processus to handle connections
	$SED "s?^minchildren =.*?minchildren = 15?g" $DIR_DG/e2guardian.conf
# Maximum number of processus to handle connections
	$SED "s?^maxchildren =.*?maxchildren = 200?g" $DIR_DG/e2guardian.conf
# Run at least 8 daemons
	$SED "s?^minsparechildren =.*?minsparechildren = 8?g" $DIR_DG/e2guardian.conf
# minimum number of processes to spawn
	$SED "s?^preforkchildren =.*?preforkchildren = 10?g" $DIR_DG/e2guardian.conf
# maximum age of a child process before it croaks it
	$SED "s?^maxagechildren =.*?maxagechildren = 1000?g" $DIR_DG/e2guardian.conf
# Disable download files control
	[ -e $DIR_DG/e2guardianf1.conf.default ] || cp $DIR_DG/e2guardianf1.conf $DIR_DG/e2guardianf1.conf.default
	$SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/e2guardianf1.conf
	[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
	[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
	touch $DIR_DG/lists/bannedextensionlist
	touch $DIR_DG/lists/bannedmimetypelist
# 'Safesearch' regex actualisation
	$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
# empty LAN IP list that won't be WEB filtered
	[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
	touch $DIR_DG/lists/exceptioniplist
# Keep a copy of URL & domain filter configuration files
	[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
	[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
} # End of e2guardian()
 
##################################################################
##                     Function "antivirus"                     ##
## - Set the parameters of havp, libclamav and freshclam        ##
##################################################################
antivirus()
{
# create 'havp' user
	havp_exist=`grep -c ^havp: /etc/passwd`
	if [ "$havp_exist" == "1" ]
	then
		userdel -r havp 2>/dev/null
		groupdel havp 2>/dev/null
	fi
	groupadd -f havp
	useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
	mkdir -p /var/tmp/havp /var/log/havp /var/run/havp /var/log/clamav /var/lib/clamav
	chown -R havp:havp /var/tmp/havp /var/log/havp /var/run/havp
	chown -R clamav:clamav /var/log/clamav /var/lib/clamav
	[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
	$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
	$SED "s?^# PIDFILE.*?PIDFILE /var/run/havp/havp.pid?g" /etc/havp/havp.config	# pidfile
	$SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config		# transparent mode
	$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config	# we listen only on loopback
	$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config				# datas come on port 8090 (on loopback)
	$SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config	# Log format
	$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config		# active libclamav AV
	$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config			# log only when malware matches
	$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config		# 10 daemons are started simultaneously
	$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config		# doesn't scan image files
	$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
# skip checking of youtube flow (too heavy load / risk too low)
	[ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
	echo "# Whitelist youtube flow" >> /etc/havp/whitelist
	echo "*.youtube.com/*" >> /etc/havp/whitelist
# adapt init script and systemd unit
	[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
	cp -f $DIR_CONF/havp-init /etc/init.d/havp
	[ -e /lib/systemd/system/havp.service.default ] || cp /lib/systemd/system/havp.service /lib/systemd/system/havp.service.default
	$SED "/^PIDFile/i ExecStartPre=/bin/mkdir -p /var/run/havp" /lib/systemd/system/havp.service
	$SED "/^PIDFile/i ExecStartPre=/bin/chown -R havp:havp /var/run/havp /var/log/havp" /lib/systemd/system/havp.service
# replace of the intercept page (template)
	cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
	cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
# update virus database every 4 hours (24h/6)
	[ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
	$SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
	$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
	$SED "/^DatabaseMirror/i DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
	$SED "/^DatabaseMirror db.fr.clamav.net/i DatabaseMirror switch.clamav.net" /etc/freshclam.conf
	$SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
# update now
	/usr/bin/freshclam --no-warnings
} # End of antivirus()
 
################################################################################
##                           Function "tinyproxy"                             ##
## - Set the parameters of tinyproxy (proxy between filtered users and havp)  ##
################################################################################
tinyproxy()
{
	tinyproxy_exist=`grep -c ^tinyproxy: /etc/passwd`
	if [ "$tinyproxy_exist" == "1" ]
	then
		userdel -r tinyproxy 2>/dev/null
		groupdel tinyproxy 2>/dev/null
	fi
	groupadd -f tinyproxy
	useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
	mkdir -p /var/run/tinyproxy /var/log/tinyproxy
	chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
	[ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
	$SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
	$SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
	$SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf			# Listen Port
	$SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf		# Listen NIC (only intif)
	$SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
	$SED "s?^#PidFile.*?PidFile \"/var/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
	$SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf		# Only errors are logged
	$SED "s?^#Upstream.*?Upstream 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf	# forward to HAVP
	$SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf	# Stealth mode
	$SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf	# Allow from LAN
# Create the systemd unit
cat << EOF > /lib/systemd/system/tinyproxy.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
 
# This unit launches tinyproxy (a very light proxy).
# The "sleep 2" is needed because the pid file isn't ready for systemd
[Unit]
Description=Tinyproxy Web Proxy Server
After=network.target iptables.service
 
[Service]
Type=forking
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
ExecStartPre=/bin/sleep 2
PIDFile=/var/run/tinyproxy/tinyproxy.pid
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf
 
[Install]
WantedBy=multi-user.target
EOF
 
} # end of tinyproxy()
 
##############################################################
##                            function "ulogd"              ##
## - Ulog config for multi-log files                        ##
##############################################################
ulogd()
{
# Three instances of ulogd (three different logfiles)
	[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
	nl=1
	for log_type in traceability ssh ext-access
	do
		[ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
		[ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
		cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
		$SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
		cat << EOF >> /etc/ulogd-$log_type.conf
[emu1]
file="/var/log/firewall/$log_type.log"
sync=1
EOF
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
		nl=`expr $nl + 1`
	done
	chown -R root:apache /var/log/firewall
	chmod 750 /var/log/firewall
	chmod 640 /var/log/firewall/*
}  # End of ulogd()
 
##########################################################
##                    Function "nfsen"                  ##
## - install the nfsen grapher                          ##
## - install the two plugins porttracker & surfmap      ##
##########################################################
nfsen()
{
	tar xzf ./conf/nfsen/nfsen-*.tar.gz -C /tmp/
# Add PortTracker plugin
	for i in /var/www/html/acc/manager/nfsen/plugins /var/log/netflow/porttracker /usr/share/nfsen/plugins
	do
		[ ! -d $i ] && mkdir -p $i && chown -R apache:apache $i
	done
	$SED "s?^my \$PORTSDBDIR =.*?my \$PORTSDBDIR = \"/var/log/netflow/porttracker\";?g" /tmp/nfsen-*/contrib/PortTracker/PortTracker.pm
# use of our conf file and init unit
	cp $DIR_CONF/nfsen/nfsen.conf /tmp/nfsen-*/etc/
# Installation of nfsen (we change a little 'install.pl in order not to ask the user for the perl version)
	DirTmp=$(pwd)
	cd /tmp/nfsen-*/ || { echo "Unable to find nfsen directory"; exit 1; }
	/usr/bin/perl install.pl etc/nfsen.conf
	/usr/bin/perl install.pl etc/nfsen.conf # to avoid a Perl mistake "Semaphore introuvable"
# Create RRD DB for porttracker (only in it still doesn't exist)
	cp contrib/PortTracker/PortTracker.pm /usr/share/nfsen/plugins/
	cp contrib/PortTracker/PortTracker.php /var/www/html/acc/manager/nfsen/plugins/
	if [ "$(ls -A "/var/log/netflow/porttracker" 2>&1)" = "" ]; then sudo -u apache nftrack -I -d /var/log/netflow/porttracker; else echo "RRD DB already exists"; fi
	chmod -R 770 /var/log/netflow/porttracker
# nfsen unit for systemd
	cat << EOF > /lib/systemd/system/nfsen.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
 
# This unit launches nfsen (a Netflow grapher).
[Unit]
Description= NfSen init script
After=network.target iptables.service
 
[Service]
Type=oneshot
RemainAfterExit=yes
PIDFile=/var/run/nfsen/nfsen.pid
ExecStartPre=/bin/mkdir -p /var/run/nfsen
ExecStartPre=/bin/chown apache:apache /var/run/nfsen
ExecStart=/usr/bin/nfsen start
ExecStop=/usr/bin/nfsen stop
ExecReload=/usr/bin/nfsen restart
TimeoutSec=0
 
[Install]
WantedBy=multi-user.target
EOF
# Add the listen port to collect netflow packet (nfcapd)
	$SED 's?$ziparg $extensions.*?$ziparg $extensions -b 127.0.0.1";?g' /usr/libexec/NfSenRC.pm
# expire delay for the profile "live"
	/usr/bin/systemctl start nfsen
	/bin/nfsen -m live -e 62d 2>/dev/null
# add SURFmap plugin (waiting for new technical solution)
# see https://adullact.net/forum/forum.php?thread_id=319545&forum_id=1601&group_id=450
#	cp $DIR_CONF/nfsen/SURFmap_*.tar.gz /tmp/
#	cp $DIR_CONF/nfsen/GeoLiteCity* /tmp/
#	tar xzf /tmp/SURFmap_*.tar.gz -C /tmp/
#	cd /tmp/
#	/usr/bin/sh SURFmap/install.sh (no more used since Google sells the access to googleMap API)
# clear the installation
#	rm -rf /tmp/SURFmap*
	rm -rf /tmp/nfsen-*
	cd $DirTmp || { echo "Unable to find $DirTmp directory"; exit 1; }
	chown -R apache:apache /var/www/html/acc/manager/nfsen /usr/share/nfsen /var/log/nfsen
} # End of nfsen()
 
###########################################################
##                     Function "vnstat"                 ##
## - Initialization of Vnstat and vnstat phpFrontEnd     ##
###########################################################
vnstat()
{
	[ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
	$SED "s?^Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
	$SED "s?^DatabaseDir.*?DatabaseDir /var/log/vnstat?g" /etc/vnstat.conf
	[ -e $DIR_ACC/manager/stats/config.php.default ] || cp $DIR_ACC/manager/stats/config.php $DIR_ACC/manager/stats/config.php.default
	$SED "s?\$iface_list =.*?\$iface_list = array('$EXTIF');?" $DIR_ACC/manager/stats/config.php
	$SED "s?\$iface_title\['.*?\$iface_title\['$EXTIF'\] = \$title;?" $DIR_ACC/manager/stats/config.php
	/usr/bin/vnstat -i $EXTIF -u --force
} # End of vnstat()
 
###################################################################
##                     Function "dnsmasq"                        ##
## - creation of the conf files of dnsmasq (whitelist for ipset )##
###################################################################
dnsmasq()
{
	[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
	[ -e /etc/dnsmasq.conf.default ] || mv /etc/dnsmasq.conf /etc/dnsmasq.conf.default
	# dnsmasq listen on udp 55 ("dnsmasq with whitelist")
	cat << EOF > /etc/dnsmasq-whitelist.conf
# Configuration file for "dnsmasq with whitelist"
# ADD Toulouse university whitelist domains
pid-file=/var/run/dnsmasq-whitelist.pid
listen-address=127.0.0.1
port=55
no-dhcp-interface=lo
bind-interfaces
cache-size=1024
domain-needed
expand-hosts
bogus-priv
filterwin2k
ipset=/#/wl_ip_allowed	# dynamically add the resolv IP address in the Firewall rules
server=$DNS1
server=$DNS2
EOF
	# Create dnsmasq-whitelist unit
	mv /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
	cp /lib/systemd/system/dnsmasq.service.default /lib/systemd/system/dnsmasq-whitelist.service
	$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-whitelist.conf?g" /lib/systemd/system/dnsmasq-whitelist.service
	$SED "s?^PIDFile=.*?PIDFile=/var/run/dnsmasq-whitelist.pid?g" /lib/systemd/system/dnsmasq-whitelist.service
} # End of dnsmasq()
 
#########################################################
##              Function "unbound"                     ##
## - create the conf files for 4 unbound services      ##
## - create the systemd files for 4 unbound services   ##
#########################################################
unbound ()
{
	[ -d /etc/unbound/conf.d ] || mkdir -p /etc/unbound/conf.d
	[ -d /etc/unbound/conf.d/common ] || mkdir /etc/unbound/conf.d/common
	[ -d /etc/unbound/conf.d/common/local-forward ] || mkdir /etc/unbound/conf.d/common/local-forward
	[ -d /etc/unbound/conf.d/common/local-dns ] || mkdir /etc/unbound/conf.d/common/local-dns
	[ -d /etc/unbound/conf.d/forward ] || mkdir /etc/unbound/conf.d/forward
	[ -d /etc/unbound/conf.d/blacklist ] || mkdir /etc/unbound/conf.d/blacklist
	[ -d /etc/unbound/conf.d/whitelist ] || mkdir /etc/unbound/conf.d/whitelist
	[ -d /etc/unbound/conf.d/blackhole ] || mkdir /etc/unbound/conf.d/blackhole
	[ -d /var/log/unbound ] || { mkdir /var/log/unbound; chown unbound:unbound /var/log/unbound; }
	[ -e /etc/unbound/unbound.conf.default ] || cp /etc/unbound/unbound.conf /etc/unbound/unbound.conf.default
	# Local static DNS configuration
	[ -e /etc/unbound/conf.d/common/local-dns/global.conf ] || touch /etc/unbound/conf.d/common/local-dns/global.conf
 
# Forward zone configuration file for all unbound dns servers
	cat << EOF > /etc/unbound/conf.d/common/forward-zone.conf
forward-zone:
	name: "."
	forward-addr: $DNS1
	forward-addr: $DNS2
EOF
 
# Custom configuration file for manual DNS configuration
	cat << EOF > /etc/unbound/conf.d/common/local-forward/custom.conf
## Ajouter un bloc pour chaque nom de domaine géré par un autre seveur DNS
## Add one block for each domain name managed by an other DNS server
##
## Example:
##
## server:
##     local-zone: "<your_domain>." transparent
## forward-zone:
##     name: "<your_domain>."
##     forward-addr: <@IP_domain_server>
##
## INFO : local hostnames are resolved in /etc/hosts file
EOF
 
# Configuration file of ALCASAR main domains for $INTIF
	cat << EOF > /etc/unbound/conf.d/common/local-dns/${INTIF}.conf
server:
	local-zone: "$HOSTNAME.$DOMAIN" static
	local-data: "$HOSTNAME.$DOMAIN A $PRIVATE_IP"
	local-zone: "$HOSTNAME" static
	local-data: "$HOSTNAME A $PRIVATE_IP"
	local-zone: "$DOMAIN." static
	local-data: "$DOMAIN. A"
EOF
 
# Configuration file for lo of forward unbound
	cat << EOF > /etc/unbound/conf.d/forward/iface.lo.conf
server:
	interface: 127.0.0.1@53
	access-control-view: 127.0.0.1/8 lo
 
view:
	name: "lo"
	local-zone: "$HOSTNAME.$DOMAIN" static
	local-data: "$HOSTNAME.$DOMAIN A 127.0.0.1"
	local-zone: "$HOSTNAME" static
	local-data: "$HOSTNAME A 127.0.0.1"
	view-first: yes
EOF
 
# Configuration file for $INTIF of forward unbound
	cat << EOF > /etc/unbound/conf.d/forward/iface.${INTIF}.conf
server:
	interface: ${PRIVATE_IP}@53
	access-control-view: $PRIVATE_NETWORK_MASK $INTIF
 
view:
	name: "$INTIF"
	local-zone: "$HOSTNAME.$DOMAIN" static
	local-data: "$HOSTNAME.$DOMAIN A $PRIVATE_IP"
	local-zone: "$HOSTNAME" static
	local-data: "$HOSTNAME A $PRIVATE_IP"
	view-first: yes
EOF
 
# Configuration file for forward unbound
	cat << EOF > /etc/unbound/unbound.conf
server:
	verbosity: 1
	hide-version: yes
	hide-identity: yes
	do-ip6: no
	include: /etc/unbound/conf.d/common/forward-zone.conf
	include: /etc/unbound/conf.d/common/local-forward/*
	include: /etc/unbound/conf.d/common/local-dns/*
	include: /etc/unbound/conf.d/forward/*
EOF
 
# Configuration file for $INTIF of blacklist unbound
	cat << EOF > /etc/unbound/conf.d/blacklist/iface.${INTIF}.conf
server:
	interface: ${PRIVATE_IP}@54
	access-control: $PRIVATE_IP_MASK allow
	access-control-tag: $PRIVATE_IP_MASK "blacklist"
	access-control-tag-action: $PRIVATE_IP_MASK "blacklist" redirect
	access-control-tag-data: $PRIVATE_IP_MASK "blacklist" "A $PRIVATE_IP"
EOF
 
# Configuration file for blacklist unbound
	cat << EOF > /etc/unbound/unbound-blacklist.conf
server:
	verbosity: 1
	hide-version: yes
	hide-identity: yes
	do-ip6: no
	logfile: "/var/log/unbound/unbound-blacklist.log"
	chroot: ""
	define-tag: "blacklist"
	log-local-actions: yes
	include: /etc/unbound/conf.d/common/forward-zone.conf
	include: /etc/unbound/conf.d/common/local-forward/*
	include: /etc/unbound/conf.d/common/local-dns/*
	include: /etc/unbound/conf.d/blacklist/*
	include: /usr/local/share/unbound-bl-enabled/*
EOF
 
# Configuration file for $INTIF of whitelist unbound
	cat << EOF > /etc/unbound/conf.d/whitelist/iface.${INTIF}.conf
server:
	interface: ${PRIVATE_IP}@55
	access-control: $PRIVATE_IP_MASK allow
	access-control-tag: $PRIVATE_IP_MASK "whitelist"
	access-control-tag-action: $PRIVATE_IP_MASK "whitelist" redirect
	access-control-tag-data: $PRIVATE_IP_MASK "whitelist" "A $PRIVATE_IP"
EOF
 
# Configuration file for whitelist unbound
	cat << EOF > /etc/unbound/unbound-whitelist.conf
server:
	verbosity: 1
	hide-version: yes
	hide-identity: yes
	do-ip6: no
	do-not-query-localhost: no
	define-tag: "whitelist"
	local-zone: "." transparent
	local-zone-tag: "." "whitelist"
	include: /usr/local/share/unbound-wl-enabled/*
	include: /etc/unbound/conf.d/whitelist/*
	include: /etc/unbound/conf.d/common/local-dns/*
	include: /etc/unbound/conf.d/common/local-forward/*
forward-zone:
	name: "."
	forward-addr: 127.0.0.1@55
EOF
 
# Configuration file for $INTIF of blackhole unbound
	cat << EOF > /etc/unbound/conf.d/blackhole/iface.${INTIF}.conf
server:
	interface: ${PRIVATE_IP}@56
	access-control-view: $PRIVATE_NETWORK_MASK $INTIF
 
view:
	name: "$INTIF"
	local-zone: "." redirect
	local-data: ". A $PRIVATE_IP"
EOF
 
# Configuration file for blackhole unbound
	cat << EOF > /etc/unbound/unbound-blackhole.conf
server:
	verbosity: 1
	hide-version: yes
	hide-identity: yes
	do-ip6: no
	include: /etc/unbound/conf.d/blackhole/*
	include: /etc/unbound/conf.d/common/local-dns/*
	include: /etc/unbound/conf.d/common/local-forward/*
EOF
 
	if [ ! -e /lib/systemd/system/unbound.service.default ]
	then
		cp -f /lib/systemd/system/unbound.service /lib/systemd/system/unbound.service.default
	fi
	$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/unbound -d -c /etc/unbound/unbound.conf?g" /lib/systemd/system/unbound.service
	$SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/unbound.service
	for list in blacklist blackhole whitelist
	do
		cp -f /lib/systemd/system/unbound.service /lib/systemd/system/unbound-$list.service
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/unbound -d -c /etc/unbound/unbound-$list.conf?g" /lib/systemd/system/unbound-$list.service
		$SED "s?^PIDFile=.*?PIDFile=/var/run/unbound-$list.pid?g" /lib/systemd/system/unbound-$list.service
	done
	$SED "s?^After=.*?After=syslog.target network-online.target chilli.service dnsmasq-whitelist.service?g" /lib/systemd/system/unbound-whitelist.service
} # End of unbound()
 
##################################################
##              Function "dhcpd"                ##
##################################################
dhcpd()
{
	[ -e /etc/dhcpd.conf.default ] || cp /etc/dhcpd.conf /etc/dhcpd.conf.default
	cat <<EOF > /etc/dhcpd.conf
ddns-update-style none;
subnet $PRIVATE_NETWORK netmask $PRIVATE_NETMASK {
	option routers $PRIVATE_IP;
	option subnet-mask $PRIVATE_NETMASK;
	option domain-name-servers $PRIVATE_IP;
	range dynamic-bootp $PRIVATE_SECOND_IP $PRIVATE_LAST_IP;
	default-lease-time 21600;
	max-lease-time 43200;
}
EOF
} # End of dhcpd()
 
##########################################################
##                      Function "BL"                   ##
## - copy Toulouse BL                                   ##
## - adapt this BL to ALCASAR architecture              ##
##     - domain names for unbound-bl & unbound-wl       ##
##     - URLs for E²guardian                            ##
##     - IPs for NetFilter                              ##
##########################################################
BL()
{
	# copy the Toulouse university BL in order to be adapted to ALCASAR architecture (alcasar-bl.sh -adapt)
	rm -rf $DIR_DG/lists/blacklists
	mkdir -p /tmp/blacklists
	cp $DIR_BLACKLIST/blacklists.tar.gz /tmp/blacklists/
# creation of file for the rehabilited domains and urls
	[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
	[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
	touch $DIR_DG/lists/exceptionsitelist
	touch $DIR_DG/lists/exceptionurllist
# On crée la configuration de base du filtrage de domaine et d'URL pour E2guardian
	cat <<EOF > $DIR_DG/lists/bannedurllist
# E2guardian filter config for ALCASAR
EOF
	cat <<EOF > $DIR_DG/lists/bannedsitelist
# E2guardian domain filter config for ALCASAR
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
#**
# block all SSL and CONNECT tunnels
**s
# block all SSL and CONNECT tunnels specified only as an IP
*ips
# block all sites specified only by an IP
*ip
EOF
# Add Bing to the safesearch url regext list (parental control)
	cat <<EOF >> $DIR_DG/lists/urlregexplist
# Bing - add 'adlt=strict'
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
EOF
# change the google safesearch ("safe=strict" instead of "safe=vss")
	$SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
# creation of the custom BL and WL categorie named "ossi" (for domain names & ip only)
	mkdir -p $DIR_DG/lists/blacklists/ossi-bl
	touch $DIR_DG/lists/blacklists/ossi-bl/domains
	echo "ossi-bl" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
	mkdir -p $DIR_DG/lists/blacklists/ossi-wl
	touch $DIR_DG/lists/blacklists/ossi-wl/domains
	echo "ossi-wl" >> $DIR_DEST_ETC/alcasar-wl-categories-enabled
# add custom ALCASAR BL files
	for x in $(ls $DIR_BLACKLIST | grep -v "^blacklist")
	do
		mkdir $DIR_DG/lists/blacklists/ossi-bl-$x
		cp $DIR_BLACKLIST/$x  $DIR_DG/lists/blacklists/ossi-bl-$x/domains
		echo "ossi-bl-$x" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
	done
	chown -R e2guardian:apache $DIR_DG
	chown -R root:apache $DIR_DEST_SHARE
	chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
# adapt the Toulouse BL to ALCASAR architecture
	$DIR_DEST_BIN/alcasar-bl.sh --adapt
# enable the default categories
	$DIR_DEST_BIN/alcasar-bl.sh --cat_choice
	rm -rf /tmp/blacklists
} # End of BL()
 
#######################################################
##                  Function "cron"                  ##
## - write all cron & anacron files                  ##
#######################################################
cron()
{
# 'crontab' with standard cron at midnight instead of 4:0 am (default)
	[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
	cat <<EOF > /etc/crontab
SHELL=/usr/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/
 
# run-parts
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
EOF
	[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
	cat <<EOF >> /etc/anacrontab
7	8	cron.MysqlDump		nice /etc/cron.d/alcasar-mysql
7	10	cron.logExport		nice /etc/cron.d/alcasar-archive
EOF
	cat <<EOF > /etc/cron.d/alcasar-mysql
# Verify, repair and export users database (every monday at 4:45 am)
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
# Remove users whose expiration date is exceeded for more more than 7 days (every Monday at 4:40 am)
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
EOF
	cat <<EOF > /etc/cron.d/alcasar-archive
# Archiving logs (traceability & users database) (every Monday at 5:35 am)
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
EOF
	cat <<EOF > /etc/cron.d/alcasar-ticket-clean
# Remove password files (created when importing users by CSV files) and user's PDF voucher (every hours at 30')
30 * * * *  root $DIR_DEST_BIN/alcasar-ticket-clean.sh
EOF
	cat <<EOF > /etc/cron.d/alcasar-distrib-updates
# Update the system (everyday at 3:30 am)
30 3 * * *  root /usr/sbin/urpmi --auto-update --auto 2>&1
EOF
	cat <<EOF > /etc/cron.d/alcasar-connections-stats
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
# 'alcasar-tot_stats' : aggregate the daily connections of users and write it in the table 'totacct' (everyday at 1:01 pm)
# 'alcasar-monthly_tot_stat' : aggregate the monthly connections of users and write it in table 'mtotacct' (everyday at 1h05 pm)
# 'alcasar-truncate_raddact' : remove the user' session log older than 365 days (applying French law : "LCEN") (every month, the first at 01:10 pm)
# 'alcasar-clean_radacct' : close the sessions openned for more than 30 days (every month, the first at 01:15 pm)
# 'alcasar-activity_report.sh' : generate an activity report in PDF (every sunday at 5:35 pm)
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
35 5 * * 0 root $DIR_DEST_BIN/alcasar-activity_report.sh > /dev/null 2>&1
EOF
	cat <<EOF > /etc/cron.d/alcasar-watchdog
# 'alcasar-watchdog.sh' : run the "watchdog" (every 10')
# 'alcasar-flush_ipset_wl.sh' : empty the IPSET of the whitelisted IP loaded dynamically with dnsmasq-whitelist hook (every sunday at 0:05 am)
# 'alcasar-watchdog-hl.sh' : (optionnaly) remove the IP 0.0.0.0 from chilli cache memory
*/10 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
0 5 * * 0 root $DIR_DEST_BIN/alcasar-flush_ipset_wl.sh > /dev/null 2>&1
#* * * * * root $DIR_DEST_BIN/alcasar-watchdog-hl.sh > /dev/null 2>&1
EOF
	cat <<EOF > /etc/cron.d/alcasar-daemon-watchdog
# start dead daemons (after boot process and every 18')
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
EOF
	cat <<EOF > /etc/cron.d/alcasar-rsync-bl
# Automatic update the BL via rsync (every 12 hours). The enabled categories are listed in '/usr/local/etc/update_cat.conf' (no sync if empty).
0 */12 * * * root $DIR_DEST_BIN/alcasar-bl.sh --update_cat > /dev/null 2>&1
EOF
	cat <<EOF > /etc/cron.d/alcasar-letsencrypt
# Automatic renew the Let's Encrypt certificate (daily --> see "cron.daily")
@daily root $DIR_DEST_BIN/alcasar-letsencrypt.sh --cron > /dev/null 2>&1
EOF
 
# removing the users crons
	rm -f /var/spool/cron/*
} # End of cron()
 
######################################################################
##                      Fonction "Fail2Ban"                         ##
##- Adapt conf file to ALCASAR                                      ##
##- Secure items : DDOS, SSH-Brute-Force, Intercept.php Brute-Force ##
######################################################################
fail2ban()
{
	/usr/bin/sh $DIR_CONF/fail2ban.sh
# Autorise la lecture seule 2 des 3 fichiers de log concernés, havp est traité dans le script d'init de havp
	[ -e /var/log/fail2ban.log ] || touch /var/log/fail2ban.log
	[ -e /var/Save/security/watchdog.log ] || touch /var/Save/security/watchdog.log
	chmod 644 /var/log/fail2ban.log
	chmod 644 /var/Save/security/watchdog.log
	/usr/bin/touch /var/log/auth.log
# fail2ban unit
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
$SED '/Type=/a\PIDFile=/var/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
$SED '/After=*/c After=syslog.target network.target lighttpd.service' /usr/lib/systemd/system/fail2ban.service
} # End of fail2ban()
 
#########################################################
##                   Fonction "gammu_smsd"             ##
## - Creating of SMS management database               ##
## - Write the gammu a gammu_smsd conf files           ##
#########################################################
gammu_smsd()
{
# Create 'gammu' system user
	groupadd -f gammu_smsd
	useradd --system -g gammu_smsd -s /bin/false -c "system user for gammu_smsd" gammu_smsd
	usermod -a -G dialout gammu_smsd
 
# Create 'gammu' database
	MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
	$MYSQL "CREATE DATABASE IF NOT EXISTS $DB_GAMMU; GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd'; FLUSH PRIVILEGES;"
# Add a gammu database structure
	/usr/bin/mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql
 
# Config file for the gammu_smsd daemon & gammu (ttyUSB0 as default com port)
	cat << EOF > /etc/gammurc
[gammu]
device = /dev/ttyUSB0
connection = at115200
EOF
 
	cat << EOF > /etc/gammu_smsd_conf
[gammu]
port = /dev/ttyUSB0
connection = at115200
 
[smsd]
PIN = 1234
logfile = /var/log/gammu-smsd/gammu-smsd.log
logformat = textall
debuglevel = 0
 
service = sql
driver = native_mysql
user = $DB_USER
password = $radiuspwd
pc = localhost
database = $DB_GAMMU
 
RunOnReceive = sudo $DIR_DEST_BIN/alcasar-sms.sh --new_sms
 
StatusFrequency = 30
;LoopSleep = 2
 
;ResetFrequency = 300
;HardResetFrequency = 120
 
CheckSecurity = 1
CheckSignal = 1
CheckBattery = 0
EOF
	chmod 755 /etc/gammu_smsd_conf /etc/gammurc
 
# Create the systemd unit
	cat << EOF > /lib/systemd/system/gammu-smsd.service
[Unit]
Description=SMS daemon for Gammu
Documentation=man:gammu-smsd(1)
After=network.target mysql.service
 
[Service]
Type=forking
ExecStart=/usr/bin/gammu-smsd --config /etc/gammu_smsd_conf --user=gammu_smsd --group=gammu_smsd --pid=/var/run/gammu-smsd.pid --daemon
ExecReload=/bin/kill -HUP $MAINPID
ExecStopPost=/bin/rm -f /var/run/gammu-smsd.pid
PIDFile=/var/run/gammu-smsd.pid
 
[Install]
WantedBy=multi-user.target
EOF
 
# Log folder for gammu-smsd
	[ -e /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
	chmod 755 /var/log/gammu-smsd
 
# Udev rule for Modeswitch (switch from "mass_storage" mode to "ttyUSB" modem) needed with some Huawei MODEM (idVendor: 12d1)
# normally not needed now since modeswitch is managed by udev (see Mageia RPM)
#cat << EOF > /lib/udev/rules.d/66-huawei.rules
#KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
#EOF
# Udev rule for fixing the enumeration of ttyUSB port on some MODEM (when they switch randomly the order of their ports at boot time)
# example : http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/
 
} # End of gammu_smsd()
 
############################################################
##                 Fonction "msec"                        ##
## - Apply the "fileserver" security level                ##
## - remove the "system request" for rebboting            ##
## - Fix several file permissions                         ##
############################################################
msec()
{
 
# Apply fileserver security level
[ -e /etc/security/msec/security.conf.default ] || cp /etc/security/msec/security.conf /etc/security/msec/security.conf.default
echo "BASE_LEVEL=fileserver" > /etc/security/msec/security.conf
 
# Set permissions monitoring and enforcement
cat <<EOF > /etc/security/msec/perm.local
/var/log/firefwall/                     root.apache     750
/var/log/firewall/*                     root.apache     640
/etc/security/msec/perm.local           root.root       640
/etc/security/msec/level.local          root.root       640
/etc/freeradius-web                     root.apache     750
/etc/freeradius-web/admin.conf          root.apache     640
/etc/raddb/client.conf                  radius.radius   640
/etc/raddb/radius.conf                  radius.radius   640
/etc/raddb/mods-available/ldap          radius.apache   660
/etc/raddb/sites-available/alcasar      radius.apache   660
/etc/pki/*                              root.apache     750
/var/log/netflow/porttracker            root.apache     770
/var/log/netflow/porttracker/*          root.apache     660
EOF
# apply now hourly & daily checks
/usr/sbin/msec
/etc/cron.weekly/msec
 
} # End of msec()
 
##################################################################
##                   Fonction "letsencrypt"                     ##
## - Install Let's Encrypt client                               ##
## - Prepare Let's Encrypt ALCASAR configuration file           ##
##################################################################
letsencrypt()
{
	echo "Installing Let's Encrypt client..."
 
	# Remove potential old installers
	rm -rf /tmp/acme.sh-*
 
	# Extract acme.sh
	tar xzf ./conf/letsencrypt-client/acme.sh-*.tar.gz -C /tmp/
 
	pwdInstall=$(pwd)
	cd /tmp/acme.sh-* || { echo "Unable to find ACME directory"; exit 1; }
 
	acmesh_installDir="/opt/acme.sh"
	acmesh_confDir="/usr/local/etc/letsencrypt"
	acmesh_userAgent="ALCASAR"
 
	# Install acme.sh
	./acme.sh --install \
		--home $acmesh_installDir \
		--config-home $acmesh_confDir/data \
		--certhome $acmesh_confDir/certs \
		--accountkey $acmesh_confDir/ca/account.key \
		--accountconf $acmesh_confDir/data/account.conf \
		--useragent $acmesh_userAgent \
		--nocron \
		> /dev/null
 
	if [ $? -ne 0 ]; then
		echo "Error during installation of Let's Encrypt client (acme.sh)."
	fi
 
	# Create configuration file
	cat <<EOF > /usr/local/etc/alcasar-letsencrypt
email=
dateIssueRequest=
domainRequest=
challenge=
dateIssued=
dnsapi=
dateNextRenewal=
EOF
 
	cd $pwdInstall || { echo "Unable to find $pwdInstall directory"; exit 1; }
	rm -rf /tmp/acme.sh-*
 
} # End of letsencrypt()
 
##################################################################
##                    Fonction "post_install"                   ##
## - Modifying banners (locals et ssh) & prompts                ##
## - SSH config                                                 ##
## - sudoers config & files security                            ##
## - log rotate & ANSSI security parameters                     ##
## - Apply former conf in case of an update                     ##
##################################################################
post_install()
{
# change the SSH banner
	cp -f $DIR_CONF/banner /etc/ssh/alcasar-banner-ssh
	echo " V$VERSION" >> /etc/ssh/alcasar-banner-ssh
	chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
	[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
	$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
	$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
# postfix banner anonymisation
	$SED "s?^smtpd_banner =.*?smtpd_banner = \$myhostname ESMTP?g" /etc/postfix/main.cf
	chown -R postfix:postfix /var/lib/postfix
# sshd liste on EXTIF & INTIF
	$SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
# sshd authorized certificate for root login
	$SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
# ALCASAR conf file
	echo "HTTPS_LOGIN=on" >> $CONF_FILE
	echo "HTTPS_CHILLI=off" >> $CONF_FILE
	echo "SSH=on" >> $CONF_FILE
	echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
	echo "LDAP=off" >> $CONF_FILE
	echo "LDAP_SERVER=127.0.0.1" >> $CONF_FILE
	echo "LDAP_BASE=cn=Users;dc=serverad;dc=localdomain" >> $CONF_FILE
	echo "LDAP_UID=sAMAccountName" >> $CONF_FILE
	echo "LDAP_FILTER=" >> $CONF_FILE
	echo "LDAP_USER=alcasar" >> $CONF_FILE
	echo "LDAP_PASSWORD=" >> $CONF_FILE
	echo "LDAP_SSL=on" >> $CONF_FILE
	echo "LDAP_CERT_REQUIRED=" >> $CONF_FILE
	echo "SMS=off" >> $CONF_FILE
	echo "SMS_NUM=" >> $CONF_FILE
	echo "MULTIWAN=off" >> $CONF_FILE
	echo "FAILOVER=30" >> $CONF_FILE
	echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
	echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
	echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
	echo "BL_PUREIP=on" >> $CONF_FILE
	echo "BL_SAFESEARCH=off" >> $CONF_FILE
	echo "WL_SAFESEARCH=off" >> $CONF_FILE
# Prompt customisation (colors)
	[ -e /etc/bashrc.default ]  || cp /etc/bashrc /etc/bashrc.default
	cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
	$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
# sudoers configuration for "apache" & "sysadmin"
	[ -e /etc/sudoers.default ]  || cp /etc/sudoers /etc/sudoers.default
	cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
	$SED "s?^Host_Alias.*?Host_Alias	LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost		#réseau de l'organisme?g" /etc/sudoers
# Modify some logrotate files (gammu, ulogd)
	cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
	chmod 644 /etc/logrotate.d/*
# Log compression
	$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
# actualisation des fichiers logs compressés
	for dir in firewall e2guardian lighttpd
	do
		find /var/log/$dir -type f -name "*.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]" -exec gzip {} \;
	done
# create the alcasar-load_balancing unit
	cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
 
# This unit lauches alcasar-load-balancing.sh script.
[Unit]
Description=alcasar-load_balancing.sh execution
After=network.target iptables.service
 
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
TimeoutSec=0
SysVStartPriority=99
 
[Install]
WantedBy=multi-user.target
EOF
	/usr/bin/systemctl daemon-reload
# processes launched at boot time (Systemctl)
	for i in alcasar-load_balancing mysqld lighttpd php-fpm ntpd iptables unbound unbound-blacklist unbound-whitelist dnsmasq-whitelist unbound-blackhole radiusd nfsen e2guardian freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
	do
		/usr/bin/systemctl -q enable $i.service
	done
 
# disable processes at boot time (Systemctl)
	for i in ulogd gpm dhcpd
	do
		/usr/bin/systemctl -q disable $i.service
	done
 
# Apply French Security Agency (ANSSI) rules
# ignore ICMP broadcast (smurf attack)
	echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
# ignore ICMP errors bogus
	echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
# remove ICMP redirects responces
	echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
	echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
# enable SYN Cookies (Syn flood attacks)
	echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
# enable kernel antispoofing
	echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
# ignore source routing
	echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
# set conntrack timer to 1h (3600s) instead of 5 weeks
	echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
# disable log_martians (ALCASAR is often installed between two private network addresses)
	echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
# disable iptables_helpers
	echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
# Switch to the router mode
	echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
# Remove unused service ipv6
	echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
	echo "net.ipv6.conf.all.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
	echo "net.ipv6.conf.default.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
	echo "net.ipv6.conf.default.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
# switch to multi-users runlevel (instead of x11)
	ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
# GRUB2 modifications (Wait time : 3s - ALCASAR entry - VGA=791 - Change the default banner
	[ -e /etc/default/grub.default ]  || cp /etc/default/grub /etc/default/grub.default
	$SED "s?^GRUB_TIMEOUT=.*?GRUB_TIMEOUT=3?g" /etc/default/grub
	$SED "s?^GRUB_DISTRIBUTOR=.*?GRUB_DISTRIBUTOR=ALCASAR?g" /etc/default/grub
	[ -e /etc/mageia-release.default ]  || cp /etc/mageia-release /etc/mageia-release.default
	vm_vga=`lsmod | egrep -c "virtio|vmwgfx"` # test if in VM
	if [ $vm_vga == 0 ] # is not a VM
	then
		cp -f $DIR_CONF/banner /etc/mageia-release # ALCASAR ASCII-Art
		echo >> /etc/mageia-release
		$SED "s?^GRUB_CMDLINE_LINUX_DEFAULT=\"?&vga=791 ?" /etc/default/grub
	fi
	if [ $Lang == "fr" ]
	then
		echo "Bienvenue sur ALCASAR V$VERSION" >> /etc/mageia-release
		echo "Connectez-vous à l'URL 'https://$HOSTNAME.$DOMAIN/acc'" >> /etc/mageia-release
	else
		echo "Welcome on ALCASAR V$VERSION" >> /etc/mageia-release
		echo "Connect to 'https://$HOSTNAME.$DOMAIN/acc'" >> /etc/mageia-release
	fi
	/usr/bin/update-grub2
# Load and apply the previous conf file
	if [ "$mode" = "update" ]
	then
		$DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
		$DIR_DEST_BIN/alcasar-conf.sh --load
		PARENT_SCRIPT=`basename $0`
		export PARENT_SCRIPT # to avoid stop&start process during the installation process
		$DIR_DEST_BIN/alcasar-conf.sh --apply
		$DIR_DEST_BIN/alcasar-file-clean.sh # Clean & sort conf files. Add uamallowed domains to the dns-blackhole conf
		$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
		$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
	fi
	rm -f /var/tmp/alcasar-conf*
	chown -R root:apache $DIR_DEST_ETC/*
	chmod -R 660 $DIR_DEST_ETC/*
	chmod ug+x $DIR_DEST_ETC/digest
	cd $DIR_INSTALL || { echo "Unable to find $DIR_INSTALL directory"; exit 1; }
	echo ""
	echo "#############################################################################"
	if [ $Lang == "fr" ]
		then
		echo "#                        Fin d'installation d'ALCASAR                       #"
		echo "#                                                                           #"
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
		echo "#                                                                           #"
		echo "#############################################################################"
		echo
		echo "- ALCASAR sera fonctionnel après redémarrage du système"
		echo
		echo "- Lisez attentivement la documentation d'exploitation"
		echo
		echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://$HOSTNAME.$DOMAIN"
		echo
		echo "                   Appuyez sur 'Entrée' pour continuer"
	else
		echo "#                        End of ALCASAR install process                     #"
		echo "#                                                                           #"
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
		echo "#                                                                           #"
		echo "#############################################################################"
		echo
		echo "- The system will be rebooted in order to operate ALCASAR"
		echo
		echo "- Read the exploitation documentation"
		echo
		echo "- The ALCASAR Control Center (ACC) is at http://$HOSTNAME.$DOMAIN"
		echo
		echo "                   Hit 'Enter' to continue"
	fi
	sleep 2
	if [ "$mode" == "install" ] || [ "$DEBUG_ALCASAR" == "on" ]
	then
		read
	fi
	clear
	reboot
} # End of post_install()
 
#####################################################################################
#                                   Main Install loop                               #
#####################################################################################
dir_exec=`dirname "$0"`
if [ $dir_exec != "." ]
then
	echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
	echo "Launch this program from the ALCASAR archive directory"
	exit 0
fi
if [ $EUID -gt 0 ]
then
	echo "Vous devez être \"root\" pour installer ALCASAR (commande 'su')"
	echo "You must be \"root\" to install ALCASAR ('su' command)"
	exit 0
fi
VERSION=`cat $DIR_INSTALL/VERSION`
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
	nb_args=1
	args="-h"
fi
chmod -R u+x $DIR_SCRIPTS/*
case $args in
	-\? | -h* | --h*)
		echo "$usage"
		exit 0
		;;
	-i | --install)
		for func in license testing
		do
			header_install
			$func
			if [ $DEBUG_ALCASAR == "on" ]
			then
				echo "*** 'debug' : end of install '$func' ***"
				read
			fi
		done
# RPMs install
		$DIR_SCRIPTS/alcasar-urpmi.sh
		if [ "$?" != "0" ]
		then
			exit 0
		fi
		if [ -e $CONF_FILE ]
		then
# Uninstall or update the running version
			if [ "$mode" == "update" ]
			then
				$DIR_DEST_BIN/alcasar-uninstall.sh -update
			else
				$DIR_DEST_BIN/alcasar-uninstall.sh -full
			fi
		fi
	if [ $DEBUG_ALCASAR == "on" ]
	then
		echo "*** 'debug' : end of cleaning ***"
		read
	fi
# Test if manual update
		if [ -e /var/tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
		then
			header_install
			if [ $Lang == "fr" ]
				then echo "Le fichier de configuration d'une ancienne version a été trouvé";
				else echo "The configuration file of an old version has been found";
			fi
			response=0
			PTN='^[oOnNyY]$'
			until [[ $(expr $response : $PTN) -gt 0 ]]
			do
				if [ $Lang == "fr" ]
					then echo -n "Voulez-vous l'utiliser (O/n)? ";
					else echo -n "Do you want to use it (Y/n)?";
				 fi
				read response
				if [ "$response" = "n" ] || [ "$response" = "N" ]
				then rm -f /var/tmp/alcasar-conf*
				fi
			done
		fi
# Test if update
		if [ -e /var/tmp/alcasar-conf* ]
		then
			if [ $Lang == "fr" ]
				then echo "#### Installation avec mise à jour ####";
				else echo "#### Installation with update     ####";
			fi
# Extract some info from the previous configuration file
			tar -xf /var/tmp/alcasar-conf* conf/etc/alcasar.conf
			ORGANISME=`grep ^ORGANISM= conf/etc/alcasar.conf|cut -d"=" -f2`
			PREVIOUS_VERSION=`grep ^VERSION= conf/etc/alcasar.conf|cut -d"=" -f2`
			MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
			MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2`
			UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3|cut -c1`
			mode="update"
		fi
		for func in init network ACC CA time_server init_db freeradius chilli e2guardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq unbound dhcpd BL cron fail2ban gammu_smsd msec letsencrypt post_install
		do
			$func
			if [ $DEBUG_ALCASAR == "on" ]
			then
				echo "*** 'debug' : end of install '$func' ***"
				read
			fi
		done
		;;
	-u | --uninstall)
		if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
		then
			if [ $Lang == "fr" ]
				then echo "ALCASAR n'est pas installé!";
				else echo "ALCASAR isn't installed!";
			fi
			exit 0
		fi
		response=0
		PTN='^[oOnN]$'
		until [[ $(expr $response : $PTN) -gt 0 ]]
		do
			if [ $Lang == "fr" ]
				then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
				else echo -n "Do you want to create the running version configuration file (Y/n)? ";
			fi
			read response
		done
		if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
		then
			$DIR_SCRIPTS/alcasar-conf.sh --create
		else
			rm -f /var/tmp/alcasar-conf*
		fi
# Uninstall the running version
		$DIR_DEST_BIN/alcasar-uninstall.sh -full
		;;
	*)
		echo "Argument inconnu :$1";
		echo "Unknown argument :$1";
		echo "$usage"
		exit 1
		;;
esac
# end of script
 
 
Generated by GNU Enscript 1.6.6.
 
 
 

Rev 2737	Rev 2739
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`# $Id: alcasar.sh 2737 2019-06-04 22:11:57Z rexy $`	2	`# $Id: alcasar.sh 2739 2019-06-06 22:11:37Z rexy $`
3		3
4	`# alcasar.sh`	4	`# alcasar.sh`
5	`# ALCASAR is a Free and open source NAC created by Franck BOUIJOUX (3abtux), Pascal LEVANT and Richard REY (Rexy)`	5	`# ALCASAR is a Free and open source NAC created by Franck BOUIJOUX (3abtux), Pascal LEVANT and Richard REY (Rexy)`
6	`# This script is distributed under the Gnu General Public License (GPL)`	6	`# This script is distributed under the Gnu General Public License (GPL)`
7	`# team@alcasar.net`	7	`# team@alcasar.net`
8		8
9	`# ALCASAR Install script - CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]`	9	`# ALCASAR Install script - CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]`
10	`# Ce programme est un logiciel libre ; This software is free and open source`	10	`# Ce programme est un logiciel libre ; This software is free and open source`
11	`# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.`	11	`# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.`
12	`# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;`	12	`# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;`
13	`# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.`	13	`# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.`
14	`# Voir la Licence Publique Générale GNU pour plus de détails.`	14	`# Voir la Licence Publique Générale GNU pour plus de détails.`
15		15
16	`# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)`	16	`# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)`
17	`# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :`	17	`# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :`
18	`# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)`	18	`# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)`
19	`# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :`	19	`# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :`
20		20
21	`# Coovachilli, freeradius, mariaDB, lighttpd, netfilter, e2guardian, ntpd, openssl, dnsmasq, unbound, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump`	21	`# Coovachilli, freeradius, mariaDB, lighttpd, netfilter, e2guardian, ntpd, openssl, dnsmasq, unbound, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump`
22		22
23	`# Options :`	23	`# Options :`
24	`# -i or --install`	24	`# -i or --install`
25	`# -u or --uninstall`	25	`# -u or --uninstall`
26		26
27	`# Functions :`	27	`# Functions :`
28	`# testing : connectivity tests, free space test and mageia version test`	28	`# testing : connectivity tests, free space test and mageia version test`
29	`# init : Installation of RPM and scripts`	29	`# init : Installation of RPM and scripts`
30	`# network : Network parameters`	30	`# network : Network parameters`
31	`# ACC : ALCASAR Control Center installation`	31	`# ACC : ALCASAR Control Center installation`
32	`# CA : Certification Authority initialization`	32	`# CA : Certification Authority initialization`
33	`# time_server : NTPd configuration`	33	`# time_server : NTPd configuration`
34	`# init_db : Initilization of radius database managed with MariaDB`	34	`# init_db : Initilization of radius database managed with MariaDB`
35	`# freeradius : FreeRadius initialisation`	35	`# freeradius : FreeRadius initialisation`
36	`# chilli : coovachilli initialisation (+authentication page)`	36	`# chilli : coovachilli initialisation (+authentication page)`
37	`# e2guardian : E2Guardian filtering HTTP proxy configuration`	37	`# e2guardian : E2Guardian filtering HTTP proxy configuration`
38	`# antivirus : HAVP + libclamav configuration`	38	`# antivirus : HAVP + libclamav configuration`
39	`# tinyproxy : little proxy for user filtered with "WL + antivirus" and "antivirus"`	39	`# tinyproxy : little proxy for user filtered with "WL + antivirus" and "antivirus"`
40	`# ulogd : log system in userland (match NFLOG target of iptables)`	40	`# ulogd : log system in userland (match NFLOG target of iptables)`
41	`# nfsen : Configuration of Nfsen Netflow grapher`	41	`# nfsen : Configuration of Nfsen Netflow grapher`
42	`# unbound : Name server configuration`	42	`# unbound : Name server configuration`
43	`# dnsmasq : Name server configuration (for whitelist ipset support)`	43	`# dnsmasq : Name server configuration (for whitelist ipset support)`
44	`# vnstat : little network stat daemon`	44	`# vnstat : little network stat daemon`
45	`# BL : Adaptation of Toulouse University BlackList : split into 3 BL (for unbound, for e2guardian and for Netfilter)`	45	`# BL : Adaptation of Toulouse University BlackList : split into 3 BL (for unbound, for e2guardian and for Netfilter)`
46	`# cron : Logs export + watchdog + connexion statistics`	46	`# cron : Logs export + watchdog + connexion statistics`
47	`# fail2ban : Fail2ban IDS installation and configuration`	47	`# fail2ban : Fail2ban IDS installation and configuration`
48	`# gammu_smsd : Autoregister addon via SMS (gammu-smsd)`	48	`# gammu_smsd : Autoregister addon via SMS (gammu-smsd)`
49	`# msec : Mandriva security package configuration`	49	`# msec : Mandriva security package configuration`
50	`# letsencrypt : Let's Encrypt client`	50	`# letsencrypt : Let's Encrypt client`
51	`# post_install : Security, log rotation, etc.`	51	`# post_install : Security, log rotation, etc.`
52		52
53	`DEBUG_ALCASAR='off'; export DEBUG_ALCASAR # Debug mode = wait (hit key) after each function`	53	`DEBUG_ALCASAR='off'; export DEBUG_ALCASAR # Debug mode = wait (hit key) after each function`
54	DATE=`date '+%d %B %Y - %Hh%M'`	54	DATE=`date '+%d %B %Y - %Hh%M'`
55	DATE_SHORT=`date '+%d/%m/%Y'`	55	DATE_SHORT=`date '+%d/%m/%Y'`
56	Lang=`echo $LANG\|cut -c 1-2`	56	Lang=`echo $LANG\|cut -c 1-2`
57	`mode="install"`	57	`mode="install"`
58	`# ***** Files parameters - paramètres fichiers *******`	58	`# ***** Files parameters - paramètres fichiers *******`
59	DIR_INSTALL=`pwd` # current directory	59	DIR_INSTALL=`pwd` # current directory
60	`DIR_CONF="$DIR_INSTALL/conf" # install directory (with conf files)`	60	`DIR_CONF="$DIR_INSTALL/conf" # install directory (with conf files)`
61	`DIR_SCRIPTS="$DIR_INSTALL/scripts" # install directory (with script files)`	61	`DIR_SCRIPTS="$DIR_INSTALL/scripts" # install directory (with script files)`
62	`DIR_BLACKLIST="$DIR_INSTALL/blacklist" # install directory (with blacklist files)`	62	`DIR_BLACKLIST="$DIR_INSTALL/blacklist" # install directory (with blacklist files)`
63	`DIR_SAVE="/var/Save" # backup directory (traceability_log, user_db, security_log)`	63	`DIR_SAVE="/var/Save" # backup directory (traceability_log, user_db, security_log)`
64	`DIR_WEB="/var/www/html" # directory of Lighttpd`	64	`DIR_WEB="/var/www/html" # directory of Lighttpd`
65	`DIR_DG="/etc/e2guardian" # directory of E2Guardian`	65	`DIR_DG="/etc/e2guardian" # directory of E2Guardian`
66	`DIR_ACC="$DIR_WEB/acc" # directory of the 'ALCASAR Control Center'`	66	`DIR_ACC="$DIR_WEB/acc" # directory of the 'ALCASAR Control Center'`
67	`DIR_DEST_BIN="/usr/local/bin" # directory of ALCASAR scripts`	67	`DIR_DEST_BIN="/usr/local/bin" # directory of ALCASAR scripts`
68	`DIR_DEST_ETC="/usr/local/etc" # directory of ALCASAR conf files`	68	`DIR_DEST_ETC="/usr/local/etc" # directory of ALCASAR conf files`
69	`DIR_DEST_SHARE="/usr/local/share" # directory of share files used by ALCASAR (unbound for instance)`	69	`DIR_DEST_SHARE="/usr/local/share" # directory of share files used by ALCASAR (unbound for instance)`
70	`CONF_FILE="$DIR_DEST_ETC/alcasar.conf" # central ALCASAR conf file`	70	`CONF_FILE="$DIR_DEST_ETC/alcasar.conf" # central ALCASAR conf file`
71	`PASSWD_FILE="/root/ALCASAR-passwords.txt" # text file with the passwords and shared secrets`	71	`PASSWD_FILE="/root/ALCASAR-passwords.txt" # text file with the passwords and shared secrets`
72	`# ***** DBMS parameters - paramètres SGBD ******`	72	`# ***** DBMS parameters - paramètres SGBD ******`
73	`DB_RADIUS="radius" # database name used by FreeRadius server`	73	`DB_RADIUS="radius" # database name used by FreeRadius server`
74	`DB_USER="radius" # user name allows to request the users database`	74	`DB_USER="radius" # user name allows to request the users database`
75	`DB_GAMMU="gammu" # database name used by Gammu-smsd`	75	`DB_GAMMU="gammu" # database name used by Gammu-smsd`
76	`# ***** Network parameters - paramètres réseau *****`	76	`# ***** Network parameters - paramètres réseau *****`
77	`HOSTNAME="alcasar" # default hostname`	77	`HOSTNAME="alcasar" # default hostname`
78	`DOMAIN="localdomain" # default local domain`	78	`DOMAIN="localdomain" # default local domain`
79	`EXTIF='' # EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)`	79	`EXTIF='' # EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)`
80	`INTIF='' # INTIF is connected to the consultation network`	80	`INTIF='' # INTIF is connected to the consultation network`
81	`MTU="1500"`	81	`MTU="1500"`
82	`DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24" # Default ALCASAR IP address`	82	`DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24" # Default ALCASAR IP address`
83	`# **** Paths - chemin des commandes *****`	83	`# **** Paths - chemin des commandes *****`
84	`SED="/bin/sed -i"`	84	`SED="/bin/sed -i"`
85	`# **************** End of global parameters *******************`	85	`# **************** End of global parameters *******************`
86		86
87	`license()`	87	`license()`
88	`{`	88	`{`
89	`if [ $Lang == "fr" ]`	89	`if [ $Lang == "fr" ]`
90	`then`	90	`then`
91	`cat $DIR_INSTALL/gpl-warning.fr.txt \| more`	91	`cat $DIR_INSTALL/gpl-warning.fr.txt \| more`
92	`else`	92	`else`
93	`cat $DIR_INSTALL/gpl-warning.txt \| more`	93	`cat $DIR_INSTALL/gpl-warning.txt \| more`
94	`fi`	94	`fi`
95	`response=0`	95	`response=0`
96	`PTN='^[oOyYnN]$'`	96	`PTN='^[oOyYnN]$'`
97	`until [[ $(expr $response : $PTN) -gt 0 ]]`	97	`until [[ $(expr $response : $PTN) -gt 0 ]]`
98	`do`	98	`do`
99	`if [ $Lang == "fr" ]`	99	`if [ $Lang == "fr" ]`
100	`then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "`	100	`then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "`
101	`else echo -n "Do you accept the terms of this license (Y/n)? : "`	101	`else echo -n "Do you accept the terms of this license (Y/n)? : "`
102	`fi`	102	`fi`
103	`read response`	103	`read response`
104	`done`	104	`done`
105	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	105	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
106	`then`	106	`then`
107	`exit 1`	107	`exit 1`
108	`fi`	108	`fi`
109	`} # End of license()`	109	`} # End of license()`
110		110
111	`header_install()`	111	`header_install()`
112	`{`	112	`{`
113	`clear`	113	`clear`
114	`echo "-----------------------------------------------------------------------------"`	114	`echo "-----------------------------------------------------------------------------"`
115	`echo " ALCASAR V$VERSION Installation"`	115	`echo " ALCASAR V$VERSION Installation"`
116	`echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"`	116	`echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"`
117	`echo "-----------------------------------------------------------------------------"`	117	`echo "-----------------------------------------------------------------------------"`
118	`} # End of header_install()`	118	`} # End of header_install()`
119		119
120	`########################################################`	120	`########################################################`
121	`## Function "testing" ##`	121	`## Function "testing" ##`
122	`## - Test Mageia version ##`	122	`## - Test Mageia version ##`
123	`## - Test ALCASAR version (if already installed) ##`	123	`## - Test ALCASAR version (if already installed) ##`
124	`## - Test free space on /var (>10G) ##`	124	`## - Test free space on /var (>10G) ##`
125	`## - Test Internet access ##`	125	`## - Test Internet access ##`
126	`########################################################`	126	`########################################################`
127	`testing()`	127	`testing()`
128	`{`	128	`{`
129	`# Test of Mageia version`	129	`# Test of Mageia version`
130	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	130	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
131	fic=`cat /etc/product.id`	131	fic=`cat /etc/product.id`
132	`unknown_os=0`	132	`unknown_os=0`
133	`old="$IFS"`	133	`old="$IFS"`
134	`IFS=","`	134	`IFS=","`
135	`set $fic`	135	`set $fic`
136	`for i in "$@"`	136	`for i in "$@"`
137	`do`	137	`do`
138	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	138	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
139	`then`	139	`then`
140	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	140	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
141	unknown_os=`expr $unknown_os + 1`	141	unknown_os=`expr $unknown_os + 1`
142	`fi`	142	`fi`
143	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	143	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
144	`then`	144	`then`
145	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	145	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
146	unknown_os=`expr $unknown_os + 1`	146	unknown_os=`expr $unknown_os + 1`
147	`fi`	147	`fi`
148	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	148	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
149	`then`	149	`then`
150	ARCH=`echo $i\|cut -d"=" -f2`	150	ARCH=`echo $i\|cut -d"=" -f2`
151	unknown_os=`expr $unknown_os + 1`	151	unknown_os=`expr $unknown_os + 1`
152	`fi`	152	`fi`
153	`done`	153	`done`
154	`if [ "$ARCH" != "x86_64" ]`	154	`if [ "$ARCH" != "x86_64" ]`
155	`then`	155	`then`
156	`if [ $Lang == "fr" ]`	156	`if [ $Lang == "fr" ]`
157	`then echo "Votre architecture matérielle doit être en 64bits"`	157	`then echo "Votre architecture matérielle doit être en 64bits"`
158	`else echo "You hardware architecture must be 64bits"`	158	`else echo "You hardware architecture must be 64bits"`
159	`fi`	159	`fi`
160	`exit 1`	160	`exit 1`
161	`fi`	161	`fi`
162	`IFS="$old"`	162	`IFS="$old"`
163	`if [[ ( $unknown_os != 3 ) \|\| ("$DISTRIBUTION" != "Mageia" ) \|\| ( "$CURRENT_VERSION" != "6" ) ]]`	163	`if [[ ( $unknown_os != 3 ) \|\| ("$DISTRIBUTION" != "Mageia" ) \|\| ( "$CURRENT_VERSION" != "6" ) ]]`
164	`then`	164	`then`
165	`if [ -e /var/tmp/alcasar-conf.tar.gz ] # update`	165	`if [ -e /var/tmp/alcasar-conf.tar.gz ] # update`
166	`then`	166	`then`
167	`echo`	167	`echo`
168	`if [ $Lang == "fr" ]`	168	`if [ $Lang == "fr" ]`
169	`then`	169	`then`
170	`echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."`	170	`echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."`
171	`echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"`	171	`echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"`
172	`echo "2 - Installez Linux-Mageia 6.0 (64bits) et ALCASAR (cf. doc d'installation)"`	172	`echo "2 - Installez Linux-Mageia 6.0 (64bits) et ALCASAR (cf. doc d'installation)"`
173	`echo "3 - Importez votre base des usagers"`	173	`echo "3 - Importez votre base des usagers"`
174	`else`	174	`else`
175	`echo "The automatic update of ALCASAR can't be performed."`	175	`echo "The automatic update of ALCASAR can't be performed."`
176	`echo "1 - Save your traceability files and the user database"`	176	`echo "1 - Save your traceability files and the user database"`
177	`echo "2 - Install Linux-Mageia 6 (64bits) & ALCASAR (cf. installation doc)"`	177	`echo "2 - Install Linux-Mageia 6 (64bits) & ALCASAR (cf. installation doc)"`
178	`echo "3 - Import your users database"`	178	`echo "3 - Import your users database"`
179	`fi`	179	`fi`
180	`else`	180	`else`
181	`if [ $Lang == "fr" ]`	181	`if [ $Lang == "fr" ]`
182	`then echo "L'installation d'ALCASAR ne peut pas être réalisée."`	182	`then echo "L'installation d'ALCASAR ne peut pas être réalisée."`
183	`else echo "The installation of ALCASAR can't be performed."`	183	`else echo "The installation of ALCASAR can't be performed."`
184	`fi`	184	`fi`
185	`fi`	185	`fi`
186	`echo`	186	`echo`
187	`if [ $Lang == "fr" ]`	187	`if [ $Lang == "fr" ]`
188	`then echo "Le système d'exploitation doit être remplacé (Mageia6-64bits)"`	188	`then echo "Le système d'exploitation doit être remplacé (Mageia6-64bits)"`
189	`else echo "The OS must be replaced (Mageia6-64bits)"`	189	`else echo "The OS must be replaced (Mageia6-64bits)"`
190	`fi`	190	`fi`
191	`exit 1`	191	`exit 1`
192	`fi`	192	`fi`
193		193
194	`# Test if ALCASAR is already installed`	194	`# Test if ALCASAR is already installed`
195	`if [ -e $CONF_FILE ]`	195	`if [ -e $CONF_FILE ]`
196	`then`	196	`then`
197	current_version=`grep ^VERSION= $CONF_FILE \| cut -d"=" -f2`	197	current_version=`grep ^VERSION= $CONF_FILE \| cut -d"=" -f2`
198	`if [ $Lang == "fr" ]`	198	`if [ $Lang == "fr" ]`
199	`then echo "La version $current_version d'ALCASAR est déjà installée"`	199	`then echo "La version $current_version d'ALCASAR est déjà installée"`
200	`else echo "ALCASAR version $current_version is already installed"`	200	`else echo "ALCASAR version $current_version is already installed"`
201	`fi`	201	`fi`
202	`response=0`	202	`response=0`
203	`PTN='^[12]$'`	203	`PTN='^[12]$'`
204	`until [[ $(expr $response : $PTN) -gt 0 ]]`	204	`until [[ $(expr $response : $PTN) -gt 0 ]]`
205	`do`	205	`do`
206	`if [ $Lang == "fr" ]`	206	`if [ $Lang == "fr" ]`
207	`then echo -n "Tapez '1' pour une mise à jour; Tapez '2' pour une réinstallation : "`	207	`then echo -n "Tapez '1' pour une mise à jour; Tapez '2' pour une réinstallation : "`
208	`else echo -n "Hit '1' for an update; Hit '2' for a reinstallation : "`	208	`else echo -n "Hit '1' for an update; Hit '2' for a reinstallation : "`
209	`fi`	209	`fi`
210	`read response`	210	`read response`
211	`done`	211	`done`
212	`if [ "$response" = "2" ]`	212	`if [ "$response" = "2" ]`
213	`then`	213	`then`
214	`rm -f /var/tmp/alcasar-conf*`	214	`rm -f /var/tmp/alcasar-conf*`
215	`else`	215	`else`
216	`# Retrieve former NICname`	216	`# Retrieve former NICname`
217	EXTIF_saved=`grep ^EXTIF= $CONF_FILE \| cut -d'=' -f2-` # EXTernal InterFace	217	EXTIF_saved=`grep ^EXTIF= $CONF_FILE \| cut -d'=' -f2-` # EXTernal InterFace
218	INTIF_saved=`grep ^INTIF= $CONF_FILE \| cut -d'=' -f2-` # INTernal InterFace	218	INTIF_saved=`grep ^INTIF= $CONF_FILE \| cut -d'=' -f2-` # INTernal InterFace
219	`[ "$(/usr/sbin/ip link \| grep -c " $EXTIF_saved:")" -ne 0 ] && EXTIF=$EXTIF_saved \|\| echo "Warning: Network card \"$EXTIF_saved\" is not connected, so \"$EXTIF\" will be used for external network."`	219	`[ "$(/usr/sbin/ip link \| grep -c " $EXTIF_saved:")" -ne 0 ] && EXTIF=$EXTIF_saved \|\| echo "Warning: Network card \"$EXTIF_saved\" is not connected, so \"$EXTIF\" will be used for external network."`
220	`[ "$(/usr/sbin/ip link \| grep -c " $INTIF_saved:")" -ne 0 ] && INTIF=$INTIF_saved \|\| echo "Warning: Network card \"$INTIF_saved\" is not connected, so \"$INTIF\" will be used for internal network."`	220	`[ "$(/usr/sbin/ip link \| grep -c " $INTIF_saved:")" -ne 0 ] && INTIF=$INTIF_saved \|\| echo "Warning: Network card \"$INTIF_saved\" is not connected, so \"$INTIF\" will be used for internal network."`
221	`# Create the current conf file`	221	`# Create the current conf file`
222	`$DIR_SCRIPTS/alcasar-conf.sh --create`	222	`$DIR_SCRIPTS/alcasar-conf.sh --create`
223	`mode="update"`	223	`mode="update"`
224	`fi`	224	`fi`
225	`fi`	225	`fi`
226	`# Test free space on /var`	226	`# Test free space on /var`
227	`if [ ! -d /var/log/netflow/porttracker ]`	227	`if [ ! -d /var/log/netflow/porttracker ]`
228	`then`	228	`then`
229	free_space=`df -BG --output=avail /var\|tail -1\|tr -d '[:space:]G'`	229	free_space=`df -BG --output=avail /var\|tail -1\|tr -d '[:space:]G'`
230	`if [ $free_space -lt 10 ]`	230	`if [ $free_space -lt 10 ]`
231	`then`	231	`then`
232	`if [ $Lang == "fr" ]`	232	`if [ $Lang == "fr" ]`
233	`then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"`	233	`then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"`
234	`else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"`	234	`else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"`
235	`fi`	235	`fi`
236	`exit 0`	236	`exit 0`
237	`fi`	237	`fi`
238	`fi`	238	`fi`
239		239
240	`# Detect external/internal interfaces`	240	`# Detect external/internal interfaces`
241	`if [ -z "$EXTIF" ]; then`	241	`if [ -z "$EXTIF" ]; then`
242	`EXTIF=$(/usr/sbin/ip route list \| awk '/^default / {print $5}')`	242	`EXTIF=$(/usr/sbin/ip route list \| awk '/^default / {print $5}')`
243	`if [ -z "$EXTIF" ]; then`	243	`if [ -z "$EXTIF" ]; then`
244	`if [ "$Lang" == 'fr' ]`	244	`if [ "$Lang" == 'fr' ]`
245	`then echo -n "Aucune passerelle par défaut configurée"`	245	`then echo -n "Aucune passerelle par défaut configurée"`
246	`else echo -n "No default gateway configured"`	246	`else echo -n "No default gateway configured"`
247	`fi`	247	`fi`
248	`exit 1`	248	`exit 1`
249	`fi`	249	`fi`
250	`fi`	250	`fi`
251	`if [ "$Lang" == 'fr' ]`	251	`if [ "$Lang" == 'fr' ]`
252	`then echo "Interface externe (Internet) utilisée : $EXTIF"`	252	`then echo "Interface externe (Internet) utilisée : $EXTIF"`
253	`else echo "External interface (Internet) used: $EXTIF"`	253	`else echo "External interface (Internet) used: $EXTIF"`
254	`fi`	254	`fi`
255		255
256	`if [ -z "$INTIF" ]; then`	256	`if [ -z "$INTIF" ]; then`
257	`interfacesList=$(/usr/sbin/ip -br link show \| cut -d' ' -f1 \| grep -v "^\(lo\\|tun0\\|$EXTIF\)\$")`	257	`interfacesList=$(/usr/sbin/ip -br link show \| cut -d' ' -f1 \| grep -v "^\(lo\\|tun0\\|$EXTIF\)\$")`
258	`interfacesCount=$(echo "$interfacesList" \| wc -w)`	258	`interfacesCount=$(echo "$interfacesList" \| wc -w)`
259	`if [ $interfacesCount -eq 0 ]; then`	259	`if [ $interfacesCount -eq 0 ]; then`
260	`if [ "$Lang" == 'fr' ]`	260	`if [ "$Lang" == 'fr' ]`
261	`then echo "Aucune interface de disponible pour le réseau interne"`	261	`then echo "Aucune interface de disponible pour le réseau interne"`
262	`else echo "No interface available for the internal network"`	262	`else echo "No interface available for the internal network"`
263	`fi`	263	`fi`
264	`exit 1`	264	`exit 1`
265	`elif [ $interfacesCount -eq 1 ]; then`	265	`elif [ $interfacesCount -eq 1 ]; then`
266	`INTIF="$interfacesList"`	266	`INTIF="$interfacesList"`
267	`else`	267	`else`
268	`interfacesSorted=$(/usr/sbin/ip -br addr \| grep -v "^\(lo\\|tun0\\|$EXTIF\) " \| sort -b -k3n -k2r -k1)`	268	`interfacesSorted=$(/usr/sbin/ip -br addr \| grep -v "^\(lo\\|tun0\\|$EXTIF\) " \| sort -b -k3n -k2r -k1)`
269	`interfacePreferred=$(echo "$interfacesSorted" \| head -1 \| cut -d' ' -f1)`	269	`interfacePreferred=$(echo "$interfacesSorted" \| head -1 \| cut -d' ' -f1)`
270	`if [ "$Lang" == 'fr' ]`	270	`if [ "$Lang" == 'fr' ]`
271	`then echo 'Liste des interfaces disponible :'`	271	`then echo 'Liste des interfaces disponible :'`
272	`else echo 'List of available interfaces:'`	272	`else echo 'List of available interfaces:'`
273	`fi`	273	`fi`
274	`echo "$interfacesSorted"`	274	`echo "$interfacesSorted"`
275	`response=''`	275	`response=''`
276	`while true; do`	276	`while true; do`
277	`if [ "$Lang" == 'fr' ]`	277	`if [ "$Lang" == 'fr' ]`
278	`then echo -n "Choix de l'interface interne ? [$interfacePreferred] "`	278	`then echo -n "Choix de l'interface interne ? [$interfacePreferred] "`
279	`else echo -n "Choice of internal interface ? [$interfacePreferred] "`	279	`else echo -n "Choice of internal interface ? [$interfacePreferred] "`
280	`fi`	280	`fi`
281	`read response`	281	`read response`
282		282
283	`[ -z "$response" ] && response="$interfacePreferred"`	283	`[ -z "$response" ] && response="$interfacePreferred"`
284		284
285	`# Check if interface exist`	285	`# Check if interface exist`
286	`if [ "$(echo "$interfacesList" \| grep -c "^$response\$")" -eq 1 ]; then`	286	`if [ "$(echo "$interfacesList" \| grep -c "^$response\$")" -eq 1 ]; then`
287	`INTIF="$response"`	287	`INTIF="$response"`
288	`break`	288	`break`
289	`else`	289	`else`
290	`if [ "$Lang" == 'fr' ]`	290	`if [ "$Lang" == 'fr' ]`
291	`then echo "Interface \"$response\" introuvable"`	291	`then echo "Interface \"$response\" introuvable"`
292	`else echo "Interface \"$response\" not found"`	292	`else echo "Interface \"$response\" not found"`
293	`fi`	293	`fi`
294	`fi`	294	`fi`
295	`done`	295	`done`
296	`fi`	296	`fi`
297	`fi`	297	`fi`
298	`if [ "$Lang" == 'fr' ]`	298	`if [ "$Lang" == 'fr' ]`
299	`then echo "Interface interne utilisée : $INTIF"`	299	`then echo "Interface interne utilisée : $INTIF"`
300	`else echo "Internal interface used: $INTIF"`	300	`else echo "Internal interface used: $INTIF"`
301	`fi`	301	`fi`
302		302
303	`if [ $Lang == "fr" ]`	303	`if [ $Lang == "fr" ]`
304	`then echo -n "Tests des paramètres réseau : "`	304	`then echo -n "Tests des paramètres réseau : "`
305	`else echo -n "Network parameters tests: "`	305	`else echo -n "Network parameters tests: "`
306	`fi`	306	`fi`
307	`# Remove conf file if NIC is not plugged (ie : GSM/WIFI/Bt dongles)`	307	`# Remove conf file if NIC is not plugged (ie : GSM/WIFI/Bt dongles)`
308	`cd /etc/sysconfig/network-scripts/ \|\| { echo "Unable to find /etc/sysconfig/network-scripts directory"; exit 1; }`	308	`cd /etc/sysconfig/network-scripts/ \|\| { echo "Unable to find /etc/sysconfig/network-scripts directory"; exit 1; }`
309	IF_INTERFACES=`ls ifcfg-\|cut -d"-" -f2\|grep -v "^lo"\|cut -d"" -f1`	309	IF_INTERFACES=`ls ifcfg-\|cut -d"-" -f2\|grep -v "^lo"\|cut -d"" -f1`
310	`for i in $IF_INTERFACES`	310	`for i in $IF_INTERFACES`
311	`do`	311	`do`
312	`if [ "$(/usr/sbin/ip link \| grep -c " $i:")" -eq 0 ]; then`	312	`if [ "$(/usr/sbin/ip link \| grep -c " $i:")" -eq 0 ]; then`
313	`rm -f ifcfg-$i`	313	`rm -f ifcfg-$i`
314		314
315	`if [ $Lang == "fr" ]`	315	`if [ $Lang == "fr" ]`
316	`then echo "Suppression : ifcfg-$i"`	316	`then echo "Suppression : ifcfg-$i"`
317	`else echo "Deleting: ifcfg-$i"`	317	`else echo "Deleting: ifcfg-$i"`
318	`fi`	318	`fi`
319	`fi`	319	`fi`
320	`done`	320	`done`
321	`cd $DIR_INSTALL \|\| { echo "Unable to find $DIR_INSTALL directory"; exit 1; }`	321	`cd $DIR_INSTALL \|\| { echo "Unable to find $DIR_INSTALL directory"; exit 1; }`
322	`echo -n "."`	322	`echo -n "."`
323	`# Test Ethernet NIC links state`	323	`# Test Ethernet NIC links state`
324	`interfacesDown=$(/usr/sbin/ip -br link \| grep "^\($EXTIF\\|$INTIF\) " \| grep 'NO-CARRIER' \| cut -d' ' -f1)`	324	`interfacesDown=$(/usr/sbin/ip -br link \| grep "^\($EXTIF\\|$INTIF\) " \| grep 'NO-CARRIER' \| cut -d' ' -f1)`
325	`if [ ! -z "$interfacesDown" ]; then`	325	`if [ ! -z "$interfacesDown" ]; then`
326	`for i in $interfacesDown; do`	326	`for i in $interfacesDown; do`
327	`if [ $Lang == "fr" ]`	327	`if [ $Lang == "fr" ]`
328	`then`	328	`then`
329	`echo -e "\nÉchec"`	329	`echo -e "\nÉchec"`
330	`echo "Le lien réseau de la carte $i n'est pas actif."`	330	`echo "Le lien réseau de la carte $i n'est pas actif."`
331	`echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"`	331	`echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"`
332	`else`	332	`else`
333	`echo -e "\nFailed"`	333	`echo -e "\nFailed"`
334	`echo "The link state of $i interface is down."`	334	`echo "The link state of $i interface is down."`
335	`echo "Make sure that this network card is connected to a switch or an A.P."`	335	`echo "Make sure that this network card is connected to a switch or an A.P."`
336	`fi`	336	`fi`
337	`done`	337	`done`
338	`exit 1`	338	`exit 1`
339	`fi`	339	`fi`
340	`echo -n "."`	340	`echo -n "."`
341	`# Test EXTIF config files`	341	`# Test EXTIF config files`
342	PUBLIC_IP_MASK=`/usr/sbin/ip addr show $EXTIF \| grep '^\s*inet\s' \| awk '{ print $2 }'`	342	PUBLIC_IP_MASK=`/usr/sbin/ip addr show $EXTIF \| grep '^\s*inet\s' \| awk '{ print $2 }'`
343	PUBLIC_IP=`echo $PUBLIC_IP_MASK \| cut -d'/' -f1`	343	PUBLIC_IP=`echo $PUBLIC_IP_MASK \| cut -d'/' -f1`
344	PUBLIC_GATEWAY=`/usr/sbin/ip route list \| awk -v EXTIF="$EXTIF" '(/^default / && $5 == EXTIF) {print $3}'`	344	PUBLIC_GATEWAY=`/usr/sbin/ip route list \| awk -v EXTIF="$EXTIF" '(/^default / && $5 == EXTIF) {print $3}'`
345	`if [ "$(echo $PUBLIC_IP\|wc -c)" -lt 7 ] \|\| [ "$(echo $PUBLIC_GATEWAY\|wc -c)" -lt 7 ]`	345	`if [ "$(echo $PUBLIC_IP\|wc -c)" -lt 7 ] \|\| [ "$(echo $PUBLIC_GATEWAY\|wc -c)" -lt 7 ]`
346	`then`	346	`then`
347	`if [ $Lang == "fr" ]`	347	`if [ $Lang == "fr" ]`
348	`then`	348	`then`
349	`echo -e "\nÉchec"`	349	`echo -e "\nÉchec"`
350	`echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."`	350	`echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."`
351	`echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"`	351	`echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"`
352	`echo "Appliquez les changements : 'systemctl restart network'"`	352	`echo "Appliquez les changements : 'systemctl restart network'"`
353	`else`	353	`else`
354	`echo -e "\nFailed"`	354	`echo -e "\nFailed"`
355	`echo "The Internet connected network card ($EXTIF) isn't well configured."`	355	`echo "The Internet connected network card ($EXTIF) isn't well configured."`
356	`echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"`	356	`echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"`
357	`echo "Apply the new configuration: 'systemctl restart network'"`	357	`echo "Apply the new configuration: 'systemctl restart network'"`
358	`fi`	358	`fi`
359	`echo "DEVICE=$EXTIF"`	359	`echo "DEVICE=$EXTIF"`
360	`echo "IPADDR="`	360	`echo "IPADDR="`
361	`echo "NETMASK="`	361	`echo "NETMASK="`
362	`echo "GATEWAY="`	362	`echo "GATEWAY="`
363	`echo "DNS1="`	363	`echo "DNS1="`
364	`echo "DNS2="`	364	`echo "DNS2="`
365	`echo "ONBOOT=yes"`	365	`echo "ONBOOT=yes"`
366	`exit 1`	366	`exit 1`
367	`fi`	367	`fi`
368	`echo -n "."`	368	`echo -n "."`
369	`# Test if default GW is set on EXTIF (router or ISP provider equipment)`	369	`# Test if default GW is set on EXTIF (router or ISP provider equipment)`
370	`if [ "$(/usr/sbin/ip route list\|grep " $EXTIF "\|grep -c '^default ')" -ne 1 ] ; then`	370	`if [ "$(/usr/sbin/ip route list\|grep " $EXTIF "\|grep -c '^default ')" -ne 1 ] ; then`
371	`if [ $Lang == "fr" ]`	371	`if [ $Lang == "fr" ]`
372	`then`	372	`then`
373	`echo -e "\nÉchec"`	373	`echo -e "\nÉchec"`
374	`echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."`	374	`echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."`
375	`echo "Réglez ce problème puis relancez ce script."`	375	`echo "Réglez ce problème puis relancez ce script."`
376	`else`	376	`else`
377	`echo -e "\nFailed"`	377	`echo -e "\nFailed"`
378	`echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"`	378	`echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"`
379	`echo "Resolv this problem, then restart this script."`	379	`echo "Resolv this problem, then restart this script."`
380	`fi`	380	`fi`
381	`exit 1`	381	`exit 1`
382	`fi`	382	`fi`
383	`echo -n "."`	383	`echo -n "."`
384	`# Test if default GW is alive`	384	`# Test if default GW is alive`
385	arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY\|grep response\|cut -d" " -f2`	385	arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY\|grep response\|cut -d" " -f2`
386	`if [ "$(expr $arp_reply)" -eq 0 ]`	386	`if [ "$(expr $arp_reply)" -eq 0 ]`
387	`then`	387	`then`
388	`if [ $Lang == "fr" ]`	388	`if [ $Lang == "fr" ]`
389	`then`	389	`then`
390	`echo -e "\nÉchec"`	390	`echo -e "\nÉchec"`
391	`echo "Le routeur de sortie ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."`	391	`echo "Le routeur de sortie ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."`
392	`echo "Réglez ce problème puis relancez ce script."`	392	`echo "Réglez ce problème puis relancez ce script."`
393	`else`	393	`else`
394	`echo -e "\nFailed"`	394	`echo -e "\nFailed"`
395	`echo "The Internet gateway or the ISP equipment ($PUBLIC_GATEWAY) doesn't answered."`	395	`echo "The Internet gateway or the ISP equipment ($PUBLIC_GATEWAY) doesn't answered."`
396	`echo "Resolv this problem, then restart this script."`	396	`echo "Resolv this problem, then restart this script."`
397	`fi`	397	`fi`
398	`exit 1`	398	`exit 1`
399	`fi`	399	`fi`
400	`echo -n "."`	400	`echo -n "."`
401	`# Test Internet connectivity`	401	`# Test Internet connectivity`
402	`domainTested='www.google.com'`	402	`domainTested='www.google.com'`
403	`/usr/bin/curl -s --head "$domainTested" &>/dev/null`	403	`/usr/bin/curl -s --head "$domainTested" &>/dev/null`
404	`if [ $? -ne 0 ]; then`	404	`if [ $? -ne 0 ]; then`
405	`if [ $Lang == "fr" ]`	405	`if [ $Lang == "fr" ]`
406	`then`	406	`then`
407	`echo -e "\nLa tentative de connexion vers Internet a échoué ($domainTested)."`	407	`echo -e "\nLa tentative de connexion vers Internet a échoué ($domainTested)."`
408	`echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."`	408	`echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."`
409	`echo "Vérifiez la validité des adresses IP des DNS."`	409	`echo "Vérifiez la validité des adresses IP des DNS."`
410	`else`	410	`else`
411	`echo -e "\nThe Internet connection try failed ($domainTested)."`	411	`echo -e "\nThe Internet connection try failed ($domainTested)."`
412	`echo "Please, verify that the $EXTIF card is connected with the Internet gateway."`	412	`echo "Please, verify that the $EXTIF card is connected with the Internet gateway."`
413	`echo "Verify the DNS IP addresses"`	413	`echo "Verify the DNS IP addresses"`
414	`fi`	414	`fi`
415	`exit 1`	415	`exit 1`
416	`fi`	416	`fi`
417	`echo ". : ok"`	417	`echo ". : ok"`
418	`} # End of testing()`	418	`} # End of testing()`
419		419
420	`#######################################################################`	420	`#######################################################################`
421	`## Function "init" ##`	421	`## Function "init" ##`
422	`## - Creation of ALCASAR conf file "/usr/local/etc/alcasar.conf ##`	422	`## - Creation of ALCASAR conf file "/usr/local/etc/alcasar.conf ##`
423	`## - Creation of random password for GRUB, mariadb (admin and user) ##`	423	`## - Creation of random password for GRUB, mariadb (admin and user) ##`
424	`#######################################################################`	424	`#######################################################################`
425	`init()`	425	`init()`
426	`{`	426	`{`
427	`if [ "$mode" != "update" ]`	427	`if [ "$mode" != "update" ]`
428	`then`	428	`then`
429	`# On affecte le nom d'organisme`	429	`# On affecte le nom d'organisme`
430	`header_install`	430	`header_install`
431	`ORGANISME=!`	431	`ORGANISME=!`
432	`PTN='^[a-zA-Z0-9-]*$'`	432	`PTN='^[a-zA-Z0-9-]*$'`
433	`until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]`	433	`until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]`
434	`do`	434	`do`
435	`if [ $Lang == "fr" ]`	435	`if [ $Lang == "fr" ]`
436	`then echo -n "Entrez le nom de votre organisme : "`	436	`then echo -n "Entrez le nom de votre organisme : "`
437	`else echo -n "Enter the name of your organism : "`	437	`else echo -n "Enter the name of your organism : "`
438	`fi`	438	`fi`
439	`read ORGANISME`	439	`read ORGANISME`
440	`if [ "$ORGANISME" == "" ]`	440	`if [ "$ORGANISME" == "" ]`
441	`then`	441	`then`
442	`ORGANISME=!`	442	`ORGANISME=!`
443	`fi`	443	`fi`
444	`done`	444	`done`
445	`fi`	445	`fi`
446	`# On crée aléatoirement les mots de passe et les secrets partagés`	446	`# On crée aléatoirement les mots de passe et les secrets partagés`
447	`# We create random passwords and shared secrets`	447	`# We create random passwords and shared secrets`
448	`rm -f $PASSWD_FILE`	448	`rm -f $PASSWD_FILE`
449	`echo "##### ALCASAR ($ORGANISME) security passwords #####" > $PASSWD_FILE`	449	`echo "##### ALCASAR ($ORGANISME) security passwords #####" > $PASSWD_FILE`
450	grub2pwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c8`	450	grub2pwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c8`
451	pbkdf2=`( echo $grub2pwd ; echo $grub2pwd ) \| \	451	pbkdf2=`( echo $grub2pwd ; echo $grub2pwd ) \| \
452	`LC_ALL=C /usr/bin/grub2-mkpasswd-pbkdf2 \| \`	452	`LC_ALL=C /usr/bin/grub2-mkpasswd-pbkdf2 \| \`
453	`grep -v '[eE]nter password:' \| \`	453	`grep -v '[eE]nter password:' \| \`
454	sed -e "s/PBKDF2 hash of your password is //"`	454	sed -e "s/PBKDF2 hash of your password is //"`
455	`echo "GRUB2_PASSWORD=$pbkdf2" > /boot/grub2/user.cfg`	455	`echo "GRUB2_PASSWORD=$pbkdf2" > /boot/grub2/user.cfg`
456	`[ -e /root/grub.default ] \|\| cp /etc/grub.d/10_linux /root/grub.default`	456	`[ -e /root/grub.default ] \|\| cp /etc/grub.d/10_linux /root/grub.default`
457	`cp -f $DIR_CONF/grub-10_linux /etc/grub.d/10_linux # Request password only on menu editing attempts (not when selecting an entry)`	457	`cp -f $DIR_CONF/grub-10_linux /etc/grub.d/10_linux # Request password only on menu editing attempts (not when selecting an entry)`
458	`chmod 0600 /boot/grub2/user.cfg`	458	`chmod 0600 /boot/grub2/user.cfg`
459	`echo "# Login name and password to protect GRUB2 boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE`	459	`echo "# Login name and password to protect GRUB2 boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE`
460	`echo "GRUB2_user=root" >> $PASSWD_FILE`	460	`echo "GRUB2_user=root" >> $PASSWD_FILE`
461	`echo "GRUB2_password=$grub2pwd" >> $PASSWD_FILE`	461	`echo "GRUB2_password=$grub2pwd" >> $PASSWD_FILE`
462	mysqlpwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`	462	mysqlpwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`
463	`echo "# Login name and Password of MariaDB administrator:" >> $PASSWD_FILE`	463	`echo "# Login name and Password of MariaDB administrator:" >> $PASSWD_FILE`
464	`echo "db_root=$mysqlpwd" >> $PASSWD_FILE`	464	`echo "db_root=$mysqlpwd" >> $PASSWD_FILE`
465	radiuspwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`	465	radiuspwd=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`
466	`echo "# Login name and password of MariaDB user:" >> $PASSWD_FILE`	466	`echo "# Login name and password of MariaDB user:" >> $PASSWD_FILE`
467	`echo "db_user=$DB_USER" >> $PASSWD_FILE`	467	`echo "db_user=$DB_USER" >> $PASSWD_FILE`
468	`echo "db_password=$radiuspwd" >> $PASSWD_FILE`	468	`echo "db_password=$radiuspwd" >> $PASSWD_FILE`
469	secretuam=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`	469	secretuam=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`
470	`echo "# Shared secret between the script 'intercept.php' and coova-chilli:" >> $PASSWD_FILE`	470	`echo "# Shared secret between the script 'intercept.php' and coova-chilli:" >> $PASSWD_FILE`
471	`echo "secret_uam=$secretuam" >> $PASSWD_FILE`	471	`echo "secret_uam=$secretuam" >> $PASSWD_FILE`
472	secretradius=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`	472	secretradius=`cat /dev/urandom \| tr -dc '[:alnum:]' \| head -c16`
473	`echo "# Shared secret between coova-chilli and FreeRadius:" >> $PASSWD_FILE`	473	`echo "# Shared secret between coova-chilli and FreeRadius:" >> $PASSWD_FILE`
474	`echo "secret_radius=$secretradius" >> $PASSWD_FILE`	474	`echo "secret_radius=$secretradius" >> $PASSWD_FILE`
475	`chmod 640 $PASSWD_FILE`	475	`chmod 640 $PASSWD_FILE`
476	`# copy scripts in in /usr/local/bin`	476	`# copy scripts in in /usr/local/bin`
477	`cp -fr $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown -R root:root $DIR_DEST_BIN/alcasar* ; chmod -R 740 $DIR_DEST_BIN/alcasar*`	477	`cp -fr $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown -R root:root $DIR_DEST_BIN/alcasar* ; chmod -R 740 $DIR_DEST_BIN/alcasar*`
478	`# copy conf files in /usr/local/etc`	478	`# copy conf files in /usr/local/etc`
479	`cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*`	479	`cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*`
480	`$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh`	480	`$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh`
481	`# generate central conf file`	481	`# generate central conf file`
482	`cat <<EOF > $CONF_FILE`	482	`cat <<EOF > $CONF_FILE`
483	`##########################################`	483	`##########################################`
484	`## ##`	484	`## ##`
485	`## ALCASAR Parameters ##`	485	`## ALCASAR Parameters ##`
486	`## ##`	486	`## ##`
487	`##########################################`	487	`##########################################`
488		488
489	`INSTALL_DATE=$DATE`	489	`INSTALL_DATE=$DATE`
490	`VERSION=$VERSION`	490	`VERSION=$VERSION`
491	`ORGANISM=$ORGANISME`	491	`ORGANISM=$ORGANISME`
492	`EOF`	492	`EOF`
493	`chmod o-rwx $CONF_FILE`	493	`chmod o-rwx $CONF_FILE`
494	`} # End of init()`	494	`} # End of init()`
495		495
496	`#########################################################`	496	`#########################################################`
497	`## Function "network" ##`	497	`## Function "network" ##`
498	`## - Define the several network address ##`	498	`## - Define the several network address ##`
499	`## - Define the DNS naming ##`	499	`## - Define the DNS naming ##`
500	`## - INTIF parameters (consultation network) ##`	500	`## - INTIF parameters (consultation network) ##`

Subversion Repositories ALCASAR

(root)/alcasar.sh @ 2737 – Rev 2737 → 2739