WebSVN – ALCASAR – Diff – /scripts/alcasar-rpm.sh


#!/bin/bash
 
# alcasar-rpm.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# script de mise en place des dépots RPM + installation des RPM complémentaires
# configure the RPM repository + complementary RPM installation
 
Lang=`echo $LANG|cut -c 1-2`
SED="/bin/sed -i"
VERSION="8"
ARCH="x86_64"
# The kernel version we compile netflow for
KERNEL="kernel-server-5.15.82-1.mga8-1-1.mga8"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
# (old) perl-Socket6 : needed by nfsen
# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf
# "lsscsi" & nvme-cli" & "php-dom" : needed by phpsysinfo
# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")
# "sudo" : needed after a reinstallation (to be investigated)
# "clamav" + "clamav-db" : needed because of a lack of mutual dependance
# "postfix" + "cyrus-sasl" + "lib64sasl2-plug-plain" : email registration method
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-dom unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware kernel-firmware-nonfree dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl lib64sasl2-plug-plain iftop"
 
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}
 
rpm_error ()
{
echo
if [ $Lang == "fr" ]
then
	echo "Relancez l'installation ultérieurement."
	echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"
else
	echo "Try an other install later."
	echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"
fi
}
 
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
	if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
	then
		DISTRIBUTION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
	then
		CURRENT_VERSION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
	then
		ARCH=`echo $i|cut -d"=" -f2`
	fi
done
IFS="$old"
 
# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm
 
# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
MIRROR_NBR=3
#                       For French
MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"
#                       For Europeans
MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"
#                       For everybody
MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
try_nb="0"; nb_repository="0"
while [ "$nb_repository" != "4" ]
do
	try_nb=`expr $try_nb + 1`
	MIRRORLIST="MIRRORLIST$try_nb"
	rpm_repository_sync
	nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
	if [ "$nb_repository" != "4" ]
	then
		if [ $Lang == "fr" ]
		then
			echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
		else
			echo "An error occurs when synchronising the repositories N°$try_nb"
		fi
		if [ $(expr $try_nb) -eq $MIRROR_NBR ]
		then
			rpm_error
			exit 1
		fi
		if [ $Lang == "fr" ]
		then
			echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"
		else
			echo "Do you want to try a synchronisation with an other repository? (Y/n)"
		fi
		response=0
		PTN='^[oOnNyY]?$'
		until [[ "$response" =~ $PTN ]]
		do
			read response
		done
		if [ "$response" = "n" ] || [ "$response" = "N" ]
		then
			exit 1
		fi
	fi
done
 
# At this time, we only skip Kernel update
echo "/^kernel/" > /etc/urpmi/skip.list
if [ `egrep '^exclude=' /etc/dnf/dnf.conf |wc -l` -eq "1" ]; then
	$SED "s?^exclude=.*?exclude=kernel\*?g" /etc/dnf/dnf.conf
else
	echo "exclude=kernel*" >> /etc/dnf/dnf.conf
fi
 
# Remove some RPMs in order to avoid error and automatic update
urpme wkhtmltopdf freeradius-ldap
 
# download the kernel used by ALCASAR
if [ $Lang == "fr" ]
then
	echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
	echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
 
# download updated RPM in cache
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
	echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
	echo "Updated RPM download. Please wait ..."
	echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages."
	else
		echo "An error occurs when downloading RPMS"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la mise à jour des paquetages."
	else
		echo "An error occurs when updating packages"
	fi
	rpm_error
	exit 1
fi
# Clean the RPM cache
urpmi --clean
 
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
	echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
	else
		echo "An error occurs when downloading complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --no-recommends $PACKAGES
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
	else
		echo "An error occurs when installing complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
	if [ $i != $KERNEL ];then
		urpme --auto $i
	fi
done
 
# delete unused RPMs
if [ $Lang == "fr" ]
then
	echo "Cleaning the system : "
else
	echo "Nettoyage du système : "
fi
unused_rpm="shorewall mandi plymouth squid polkit pm-utils"
/usr/sbin/urpme --auto -a $unused_rpm
for rpm in `rpm -qa|grep mga7`; do urpme --auto $rpm; done
/usr/sbin/urpme --auto --auto-orphans
 
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
for pkg in `ls rpms/$ARCH/*.rpm`
do
    urpmi --no-verify --auto $pkg
done
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
 
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)
/sbin/depmod -a 2>/dev/null
# test if all needed rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in $PACKAGES
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
 
# test if all custom rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in `ls rpms/$ARCH/|sed 's/.x86_64.rpm//'`
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
exit 0
 

Rev 3099	Rev 3103
1	`#!/bin/bash`	1	`#!/bin/bash`
2		2
3	`# alcasar-rpm.sh`	3	`# alcasar-rpm.sh`
4	`# by 3abtux and Rexy`	4	`# by 3abtux and Rexy`
5	`# This script is distributed under the Gnu General Public License (GPL)`	5	`# This script is distributed under the Gnu General Public License (GPL)`
6		6
7	`# script de mise en place des dépots RPM + installation des RPM complémentaires`	7	`# script de mise en place des dépots RPM + installation des RPM complémentaires`
8	`# configure the RPM repository + complementary RPM installation`	8	`# configure the RPM repository + complementary RPM installation`
9		9
10	Lang=`echo $LANG\|cut -c 1-2`	10	Lang=`echo $LANG\|cut -c 1-2`
11	`SED="/bin/sed -i"`	11	`SED="/bin/sed -i"`
12	`VERSION="8"`	12	`VERSION="8"`
13	`ARCH="x86_64"`	13	`ARCH="x86_64"`
14	`# The kernel version we compile netflow for`	14	`# The kernel version we compile netflow for`
15	`KERNEL="kernel-server-5.15.74-1.mga8-1-1.mga8"`	15	`KERNEL="kernel-server-5.15.82-1.mga8-1-1.mga8"`
16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`	16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`
17	`# (old) perl-Socket6 : needed by nfsen`	17	`# (old) perl-Socket6 : needed by nfsen`
18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`	18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`
19	`# "lsscsi" & nvme-cli" & "php-dom" : needed by phpsysinfo`	19	`# "lsscsi" & nvme-cli" & "php-dom" : needed by phpsysinfo`
20	`# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")`	20	`# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")`
21	`# "sudo" : needed after a reinstallation (to be investigated)`	21	`# "sudo" : needed after a reinstallation (to be investigated)`
22	`# "clamav" + "clamav-db" : needed because of a lack of mutual dependance`	22	`# "clamav" + "clamav-db" : needed because of a lack of mutual dependance`
23	`# "postfix" + "cyrus-sasl" + "lib64sasl2-plug-plain" : email registration method`	23	`# "postfix" + "cyrus-sasl" + "lib64sasl2-plug-plain" : email registration method`
24	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-dom unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware kernel-firmware-nonfree dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl lib64sasl2-plug-plain iftop"	24	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-dom unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware kernel-firmware-nonfree dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl lib64sasl2-plug-plain iftop"
25		25
26	`rpm_repository_sync ()`	26	`rpm_repository_sync ()`
27	`{`	27	`{`
28	`cat <<EOF > /etc/urpmi/urpmi.cfg`	28	`cat <<EOF > /etc/urpmi/urpmi.cfg`
29	`{`	29	`{`
30	`downloader: wget`	30	`downloader: wget`
31	`}`	31	`}`
32	`EOF`	32	`EOF`
33	`echo ${!MIRRORLIST}`	33	`echo ${!MIRRORLIST}`
34	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`	34	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`
35	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`	35	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`
36	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`	36	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`
37	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`	37	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`
38	`}`	38	`}`
39		39
40	`rpm_error ()`	40	`rpm_error ()`
41	`{`	41	`{`
42	`echo`	42	`echo`
43	`if [ $Lang == "fr" ]`	43	`if [ $Lang == "fr" ]`
44	`then`	44	`then`
45	`echo "Relancez l'installation ultérieurement."`	45	`echo "Relancez l'installation ultérieurement."`
46	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"`	46	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"`
47	`else`	47	`else`
48	`echo "Try an other install later."`	48	`echo "Try an other install later."`
49	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"`	49	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"`
50	`fi`	50	`fi`
51	`}`	51	`}`
52		52
53	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	53	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
54	fic=`cat /etc/product.id`	54	fic=`cat /etc/product.id`
55	`old="$IFS"`	55	`old="$IFS"`
56	`IFS=","`	56	`IFS=","`
57	`set $fic`	57	`set $fic`
58	`for i in $*`	58	`for i in $*`
59	`do`	59	`do`
60	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	60	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
61	`then`	61	`then`
62	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	62	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
63	`fi`	63	`fi`
64	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	64	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
65	`then`	65	`then`
66	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	66	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
67	`fi`	67	`fi`
68	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	68	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
69	`then`	69	`then`
70	ARCH=`echo $i\|cut -d"=" -f2`	70	ARCH=`echo $i\|cut -d"=" -f2`
71	`fi`	71	`fi`
72	`done`	72	`done`
73	`IFS="$old"`	73	`IFS="$old"`
74		74
75	`# We prefer wget than curl`	75	`# We prefer wget than curl`
76	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`	76	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`
77		77
78	`# Set the RPM repository (if not already set)`	78	`# Set the RPM repository (if not already set)`
79	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`	79	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`
80	`MIRROR_NBR=3`	80	`MIRROR_NBR=3`
81	`# For French`	81	`# For French`
82	`MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"`	82	`MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"`
83	`# For Europeans`	83	`# For Europeans`
84	`MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`	84	`MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`
85	`# For everybody`	85	`# For everybody`
86	`MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`	86	`MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`
87	`try_nb="0"; nb_repository="0"`	87	`try_nb="0"; nb_repository="0"`
88	`while [ "$nb_repository" != "4" ]`	88	`while [ "$nb_repository" != "4" ]`
89	`do`	89	`do`
90	try_nb=`expr $try_nb + 1`	90	try_nb=`expr $try_nb + 1`
91	`MIRRORLIST="MIRRORLIST$try_nb"`	91	`MIRRORLIST="MIRRORLIST$try_nb"`
92	`rpm_repository_sync`	92	`rpm_repository_sync`
93	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`	93	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`
94	`if [ "$nb_repository" != "4" ]`	94	`if [ "$nb_repository" != "4" ]`
95	`then`	95	`then`
96	`if [ $Lang == "fr" ]`	96	`if [ $Lang == "fr" ]`
97	`then`	97	`then`
98	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`	98	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`
99	`else`	99	`else`
100	`echo "An error occurs when synchronising the repositories N°$try_nb"`	100	`echo "An error occurs when synchronising the repositories N°$try_nb"`
101	`fi`	101	`fi`
102	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`	102	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`
103	`then`	103	`then`
104	`rpm_error`	104	`rpm_error`
105	`exit 1`	105	`exit 1`
106	`fi`	106	`fi`
107	`if [ $Lang == "fr" ]`	107	`if [ $Lang == "fr" ]`
108	`then`	108	`then`
109	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`	109	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`
110	`else`	110	`else`
111	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`	111	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`
112	`fi`	112	`fi`
113	`response=0`	113	`response=0`
114	`PTN='^[oOnNyY]?$'`	114	`PTN='^[oOnNyY]?$'`
115	`until [[ "$response" =~ $PTN ]]`	115	`until [[ "$response" =~ $PTN ]]`
116	`do`	116	`do`
117	`read response`	117	`read response`
118	`done`	118	`done`
119	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	119	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
120	`then`	120	`then`
121	`exit 1`	121	`exit 1`
122	`fi`	122	`fi`
123	`fi`	123	`fi`
124	`done`	124	`done`
125		125
126	`# At this time, we only skip Kernel update`	126	`# At this time, we only skip Kernel update`
127	`echo "/^kernel/" > /etc/urpmi/skip.list`	127	`echo "/^kernel/" > /etc/urpmi/skip.list`
128	if [ `egrep '^exclude=' /etc/dnf/dnf.conf \|wc -l` -eq "1" ]; then	128	if [ `egrep '^exclude=' /etc/dnf/dnf.conf \|wc -l` -eq "1" ]; then
129	`$SED "s?^exclude=.?exclude=kernel\?g" /etc/dnf/dnf.conf`	129	`$SED "s?^exclude=.?exclude=kernel\?g" /etc/dnf/dnf.conf`
130	`else`	130	`else`
131	`echo "exclude=kernel*" >> /etc/dnf/dnf.conf`	131	`echo "exclude=kernel*" >> /etc/dnf/dnf.conf`
132	`fi`	132	`fi`
133		133
134	`# Remove some RPMs in order to avoid error and automatic update`	134	`# Remove some RPMs in order to avoid error and automatic update`
135	`urpme wkhtmltopdf freeradius-ldap`	135	`urpme wkhtmltopdf freeradius-ldap`
136		136
137	`# download the kernel used by ALCASAR`	137	`# download the kernel used by ALCASAR`
138	`if [ $Lang == "fr" ]`	138	`if [ $Lang == "fr" ]`
139	`then`	139	`then`
140	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`	140	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`
141	`else`	141	`else`
142	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`	142	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`
143	`fi`	143	`fi`
144	`urpmi --auto --quiet $KERNEL`	144	`urpmi --auto --quiet $KERNEL`
145		145
146	`# download updated RPM in cache`	146	`# download updated RPM in cache`
147	`if [ $Lang == "fr" ]`	147	`if [ $Lang == "fr" ]`
148	`then`	148	`then`
149	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`	149	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`
150	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`	150	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`
151	`else`	151	`else`
152	`echo "Updated RPM download. Please wait ..."`	152	`echo "Updated RPM download. Please wait ..."`
153	`echo "You should now take a coffe (or a good beer) ;-)"`	153	`echo "You should now take a coffe (or a good beer) ;-)"`
154	`fi`	154	`fi`
155	`urpmi --auto --auto-update --quiet --test --retry 2`	155	`urpmi --auto --auto-update --quiet --test --retry 2`
156	`if [ "$?" != "0" ]`	156	`if [ "$?" != "0" ]`
157	`then`	157	`then`
158	`echo`	158	`echo`
159	`if [ $Lang == "fr" ]`	159	`if [ $Lang == "fr" ]`
160	`then`	160	`then`
161	`echo "Une erreur a été détectée lors de la récupération des paquetages."`	161	`echo "Une erreur a été détectée lors de la récupération des paquetages."`
162	`else`	162	`else`
163	`echo "An error occurs when downloading RPMS"`	163	`echo "An error occurs when downloading RPMS"`
164	`fi`	164	`fi`
165	`rpm_error`	165	`rpm_error`
166	`exit 1`	166	`exit 1`
167	`fi`	167	`fi`
168		168
169	`# update with cached RPM`	169	`# update with cached RPM`
170	`urpmi --auto --auto-update`	170	`urpmi --auto --auto-update`
171	`if [ "$?" != "0" ]`	171	`if [ "$?" != "0" ]`
172	`then`	172	`then`
173	`echo`	173	`echo`
174	`if [ $Lang == "fr" ]`	174	`if [ $Lang == "fr" ]`
175	`then`	175	`then`
176	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`	176	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`
177	`else`	177	`else`
178	`echo "An error occurs when updating packages"`	178	`echo "An error occurs when updating packages"`
179	`fi`	179	`fi`
180	`rpm_error`	180	`rpm_error`
181	`exit 1`	181	`exit 1`
182	`fi`	182	`fi`
183	`# Clean the RPM cache`	183	`# Clean the RPM cache`
184	`urpmi --clean`	184	`urpmi --clean`
185		185
186	`# Download of ALCASAR specifics RPM in cache (and test)`	186	`# Download of ALCASAR specifics RPM in cache (and test)`
187	`if [ $Lang == "fr" ]`	187	`if [ $Lang == "fr" ]`
188	`then`	188	`then`
189	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`	189	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`
190	`else`	190	`else`
191	`echo "Download of complementary packages. Please wait ..."`	191	`echo "Download of complementary packages. Please wait ..."`
192	`fi`	192	`fi`
193	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`	193	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`
194	`if [ "$?" != "0" ]`	194	`if [ "$?" != "0" ]`
195	`then`	195	`then`
196	`echo`	196	`echo`
197	`if [ $Lang == "fr" ]`	197	`if [ $Lang == "fr" ]`
198	`then`	198	`then`
199	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`	199	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`
200	`else`	200	`else`
201	`echo "An error occurs when downloading complementary packages"`	201	`echo "An error occurs when downloading complementary packages"`
202	`fi`	202	`fi`
203	`rpm_error`	203	`rpm_error`
204	`exit 1`	204	`exit 1`
205	`fi`	205	`fi`
206		206
207	`# update with cached RPM`	207	`# update with cached RPM`
208	`urpmi --auto --no-recommends $PACKAGES`	208	`urpmi --auto --no-recommends $PACKAGES`
209	`if [ "$?" != "0" ]`	209	`if [ "$?" != "0" ]`
210	`then`	210	`then`
211	`echo`	211	`echo`
212	`if [ $Lang == "fr" ]`	212	`if [ $Lang == "fr" ]`
213	`then`	213	`then`
214	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`	214	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`
215	`else`	215	`else`
216	`echo "An error occurs when installing complementary packages"`	216	`echo "An error occurs when installing complementary packages"`
217	`fi`	217	`fi`
218	`rpm_error`	218	`rpm_error`
219	`exit 1`	219	`exit 1`
220	`fi`	220	`fi`
221		221
222	`# Keep only the kernel version we compil netflow with, and remove all others`	222	`# Keep only the kernel version we compil netflow with, and remove all others`
223	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`	223	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`
224	`for i in $kernelVersion`	224	`for i in $kernelVersion`
225	`do`	225	`do`
226	`if [ $i != $KERNEL ];then`	226	`if [ $i != $KERNEL ];then`
227	`urpme --auto $i`	227	`urpme --auto $i`
228	`fi`	228	`fi`
229	`done`	229	`done`
230		230
231	`# delete unused RPMs`	231	`# delete unused RPMs`
232	`if [ $Lang == "fr" ]`	232	`if [ $Lang == "fr" ]`
233	`then`	233	`then`
234	`echo "Cleaning the system : "`	234	`echo "Cleaning the system : "`
235	`else`	235	`else`
236	`echo "Nettoyage du système : "`	236	`echo "Nettoyage du système : "`
237	`fi`	237	`fi`
238	`unused_rpm="shorewall mandi plymouth squid polkit pm-utils"`	238	`unused_rpm="shorewall mandi plymouth squid polkit pm-utils"`
239	`/usr/sbin/urpme --auto -a $unused_rpm`	239	`/usr/sbin/urpme --auto -a $unused_rpm`
240	for rpm in `rpm -qa\|grep mga7`; do urpme --auto $rpm; done	240	for rpm in `rpm -qa\|grep mga7`; do urpme --auto $rpm; done
241	`/usr/sbin/urpme --auto --auto-orphans`	241	`/usr/sbin/urpme --auto --auto-orphans`
242		242
243	`# Save chilli launch script (erase with new rpm one)`	243	`# Save chilli launch script (erase with new rpm one)`
244	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`	244	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`
245	`# Install home made RPMs`	245	`# Install home made RPMs`
246	for pkg in `ls rpms/$ARCH/*.rpm`	246	for pkg in `ls rpms/$ARCH/*.rpm`
247	`do`	247	`do`
248	`urpmi --no-verify --auto $pkg`	248	`urpmi --no-verify --auto $pkg`
249	`done`	249	`done`
250	`# restore chilli launch script`	250	`# restore chilli launch script`
251	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`	251	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`
252		252
253	`# Clean the RPM cache`	253	`# Clean the RPM cache`
254	`urpmi --clean`	254	`urpmi --clean`
255	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`	255	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`
256	`/sbin/depmod -a 2>/dev/null`	256	`/sbin/depmod -a 2>/dev/null`
257	`# test if all needed rpms are correctly installed`	257	`# test if all needed rpms are correctly installed`
258	`count_pkg=0; nb_pkg=0;`	258	`count_pkg=0; nb_pkg=0;`
259	`for pkg in $PACKAGES`	259	`for pkg in $PACKAGES`
260	`do`	260	`do`
261	nb_pkg=`expr $nb_pkg + 1`	261	nb_pkg=`expr $nb_pkg + 1`
262	`if rpm -q --quiet $pkg ; then`	262	`if rpm -q --quiet $pkg ; then`
263	count_pkg=`expr $count_pkg + 1`	263	count_pkg=`expr $count_pkg + 1`
264	`else`	264	`else`
265	`echo "error installing $pkg"`	265	`echo "error installing $pkg"`
266	`fi`	266	`fi`
267	`done`	267	`done`
268	`if [ $count_pkg -ne $nb_pkg ]`	268	`if [ $count_pkg -ne $nb_pkg ]`
269	`then`	269	`then`
270	`exit 1`	270	`exit 1`
271	`fi`	271	`fi`
272		272
273	`# test if all custom rpms are correctly installed`	273	`# test if all custom rpms are correctly installed`
274	`count_pkg=0; nb_pkg=0;`	274	`count_pkg=0; nb_pkg=0;`
275	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`	275	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`
276	`do`	276	`do`
277	nb_pkg=`expr $nb_pkg + 1`	277	nb_pkg=`expr $nb_pkg + 1`
278	`if rpm -q --quiet $pkg ; then`	278	`if rpm -q --quiet $pkg ; then`
279	count_pkg=`expr $count_pkg + 1`	279	count_pkg=`expr $count_pkg + 1`
280	`else`	280	`else`
281	`echo "error installing $pkg"`	281	`echo "error installing $pkg"`
282	`fi`	282	`fi`
283	`done`	283	`done`
284	`if [ $count_pkg -ne $nb_pkg ]`	284	`if [ $count_pkg -ne $nb_pkg ]`
285	`then`	285	`then`
286	`exit 1`	286	`exit 1`
287	`fi`	287	`fi`
288	`exit 0`	288	`exit 0`
289		289

Subversion Repositories ALCASAR

(root)/scripts/alcasar-rpm.sh – Rev 3099 → 3103