WebSVN – ALCASAR – Diff – /scripts/alcasar-urpmi.sh


#!/bin/bash
# $Id: alcasar-urpmi.sh 2867 2020-10-24 14:33:04Z rexy $
 
# alcasar-urpmi.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# script de mise en place des dépots RPM
# configure the RPM repository
 
Lang=`echo $LANG|cut -c 1-2`
VERSION="7"
ARCH="x86_64"
# The kernel version we compile netflow for
KERNEL="kernel-server-5.7.19-3.mga7-1-1.mga7"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
# (old) perl-Socket6 : needed by nfsen
# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf
# "lsscsi" & nvme-cli" : needed by phpsysinfo
# "sudo" : needed after a reinstallation (to be investigated)
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-rrd unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo"
 
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}
 
rpm_error ()
{
echo
if [ $Lang == "fr" ]
then
	echo "Relancez l'installation ultérieurement."
	echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"
else
	echo "Try an other install later."
	echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"
fi
}
 
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
	if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
	then
		DISTRIBUTION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
	then
		CURRENT_VERSION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
	then
		ARCH=`echo $i|cut -d"=" -f2`
	fi
done
IFS="$old"
 
# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm
 
# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
MIRROR_NBR=2
#                       For Europeans
MIRRORLIST1="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"
#                       For International install
MIRRORLIST2="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
try_nb="0"; nb_repository="0"
while [ "$nb_repository" != "4" ]
do
	try_nb=`expr $try_nb + 1`
	MIRRORLIST="MIRRORLIST$try_nb"
	rpm_repository_sync
	nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
	if [ "$nb_repository" != "4" ]
	then
		if [ $Lang == "fr" ]
		then
			echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
		else
			echo "An error occurs when synchronising the repositories N°$try_nb"
		fi
		if [ $(expr $try_nb) -eq $MIRROR_NBR ]
		then
			rpm_error
			exit 1
		fi
		if [ $Lang == "fr" ]
		then
			echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"
		else
			echo "Do you want to try a synchronisation with an other repository? (Y/n)"
		fi
		response=0
		PTN='^[oOnNyY]?$'
		until [[ "$response" =~ $PTN ]]
		do
			read response
		done
		if [ "$response" = "n" ] || [ "$response" = "N" ]
		then
			exit 1
		fi
	fi
done
# fix some RPM versions
echo "/^kernel/" > /etc/urpmi/skip.list
echo "/^freeradius/" >> /etc/urpmi/skip.list
echo "/^wkhtmltopdf/" >> /etc/urpmi/skip.list
echo "/^clamd/" >> /etc/urpmi/skip.list
echo "/^clamav/" >> /etc/urpmi/skip.list
# download the kernel used by ALCASAR
if [ $Lang == "fr" ]
then
	echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
	echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
# download updated RPM in cache
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
	echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
	echo "Updated RPM download. Please wait ..."
	echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages."
	else
		echo "An error occurs when downloading RPMS"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la mise à jour des paquetages."
	else
		echo "An error occurs when updating packages"
	fi
	rpm_error
	exit 1
fi
# Clean the RPM cache
urpmi --clean
 
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
	echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
	else
		echo "An error occurs when downloading complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --no-recommends $PACKAGES
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
	else
		echo "An error occurs when installing complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
	if [ $i != $KERNEL ];then
		urpme --auto $i
	fi
done
# delete unused RPMs
if [ $Lang == "fr" ]
then
	echo "Cleaning the system : "
else
	echo "Nettoyage du système : "
fi
rm_rpm="shorewall mandi plymouth cpupower squid"
/usr/sbin/urpme --auto -a $rm_rpm
/usr/sbin/urpme --auto --auto-orphans
 
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
for pkg in `ls rpms/$ARCH/*.rpm`
do
    urpmi --no-verify --auto $pkg
done
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)
/sbin/depmod -a 2>/dev/null
# test if all needed rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in $PACKAGES
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
# test if all custom rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in `ls rpms/$ARCH/|sed 's/.x86_64.rpm//'`
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
exit 0
 

Rev 2865	Rev 2867
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`# $Id: alcasar-urpmi.sh 2865 2020-10-18 22:21:46Z rexy $`	2	`# $Id: alcasar-urpmi.sh 2867 2020-10-24 14:33:04Z rexy $`
3		3
4	`# alcasar-urpmi.sh`	4	`# alcasar-urpmi.sh`
5	`# by 3abtux and Rexy`	5	`# by 3abtux and Rexy`
6	`# This script is distributed under the Gnu General Public License (GPL)`	6	`# This script is distributed under the Gnu General Public License (GPL)`
7		7
8	`# script de mise en place des dépots RPM`	8	`# script de mise en place des dépots RPM`
9	`# configure the RPM repository`	9	`# configure the RPM repository`
10		10
11	Lang=`echo $LANG\|cut -c 1-2`	11	Lang=`echo $LANG\|cut -c 1-2`
12	`VERSION="7"`	12	`VERSION="7"`
13	`ARCH="x86_64"`	13	`ARCH="x86_64"`
14	`# The kernel version we compile netflow for`	14	`# The kernel version we compile netflow for`
15	`KERNEL="kernel-server-5.7.14-1.mga7-1-1.mga7"`	15	`KERNEL="kernel-server-5.7.19-3.mga7-1-1.mga7"`
16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`	16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`
17	`# (old) perl-Socket6 : needed by nfsen`	17	`# (old) perl-Socket6 : needed by nfsen`
18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`	18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`
19	`# "lsscsi" & nvme-cli" : needed by phpsysinfo`	19	`# "lsscsi" & nvme-cli" : needed by phpsysinfo`
20	`# "sudo" : needed after a reinstallation (to be investigated)`	20	`# "sudo" : needed after a reinstallation (to be investigated)`
21	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-rrd unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo"	21	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-rrd unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo"
22		22
23	`rpm_repository_sync ()`	23	`rpm_repository_sync ()`
24	`{`	24	`{`
25	`cat <<EOF > /etc/urpmi/urpmi.cfg`	25	`cat <<EOF > /etc/urpmi/urpmi.cfg`
26	`{`	26	`{`
27	`downloader: wget`	27	`downloader: wget`
28	`}`	28	`}`
29	`EOF`	29	`EOF`
30	`echo ${!MIRRORLIST}`	30	`echo ${!MIRRORLIST}`
31	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`	31	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`
32	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`	32	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`
33	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`	33	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`
34	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`	34	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`
35	`}`	35	`}`
36		36
37	`rpm_error ()`	37	`rpm_error ()`
38	`{`	38	`{`
39	`echo`	39	`echo`
40	`if [ $Lang == "fr" ]`	40	`if [ $Lang == "fr" ]`
41	`then`	41	`then`
42	`echo "Relancez l'installation ultérieurement."`	42	`echo "Relancez l'installation ultérieurement."`
43	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`	43	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`
44	`else`	44	`else`
45	`echo "Try an other install later."`	45	`echo "Try an other install later."`
46	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`	46	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`
47	`fi`	47	`fi`
48	`}`	48	`}`
49		49
50	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	50	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
51	fic=`cat /etc/product.id`	51	fic=`cat /etc/product.id`
52	`old="$IFS"`	52	`old="$IFS"`
53	`IFS=","`	53	`IFS=","`
54	`set $fic`	54	`set $fic`
55	`for i in $*`	55	`for i in $*`
56	`do`	56	`do`
57	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	57	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
58	`then`	58	`then`
59	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	59	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
60	`fi`	60	`fi`
61	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	61	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
62	`then`	62	`then`
63	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	63	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
64	`fi`	64	`fi`
65	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	65	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
66	`then`	66	`then`
67	ARCH=`echo $i\|cut -d"=" -f2`	67	ARCH=`echo $i\|cut -d"=" -f2`
68	`fi`	68	`fi`
69	`done`	69	`done`
70	`IFS="$old"`	70	`IFS="$old"`
71		71
72	`# We prefer wget than curl`	72	`# We prefer wget than curl`
73	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`	73	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`
74		74
75	`# Set the RPM repository (if not already set)`	75	`# Set the RPM repository (if not already set)`
76	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`	76	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`
77	`MIRROR_NBR=2`	77	`MIRROR_NBR=2`
78	`# For Europeans`	78	`# For Europeans`
79	`MIRRORLIST1="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`	79	`MIRRORLIST1="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`
80	`# For International install`	80	`# For International install`
81	`MIRRORLIST2="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`	81	`MIRRORLIST2="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`
82	`try_nb="0"; nb_repository="0"`	82	`try_nb="0"; nb_repository="0"`
83	`while [ "$nb_repository" != "4" ]`	83	`while [ "$nb_repository" != "4" ]`
84	`do`	84	`do`
85	try_nb=`expr $try_nb + 1`	85	try_nb=`expr $try_nb + 1`
86	`MIRRORLIST="MIRRORLIST$try_nb"`	86	`MIRRORLIST="MIRRORLIST$try_nb"`
87	`rpm_repository_sync`	87	`rpm_repository_sync`
88	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`	88	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`
89	`if [ "$nb_repository" != "4" ]`	89	`if [ "$nb_repository" != "4" ]`
90	`then`	90	`then`
91	`if [ $Lang == "fr" ]`	91	`if [ $Lang == "fr" ]`
92	`then`	92	`then`
93	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`	93	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`
94	`else`	94	`else`
95	`echo "An error occurs when synchronising the repositories N°$try_nb"`	95	`echo "An error occurs when synchronising the repositories N°$try_nb"`
96	`fi`	96	`fi`
97	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`	97	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`
98	`then`	98	`then`
99	`rpm_error`	99	`rpm_error`
100	`exit 1`	100	`exit 1`
101	`fi`	101	`fi`
102	`if [ $Lang == "fr" ]`	102	`if [ $Lang == "fr" ]`
103	`then`	103	`then`
104	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`	104	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`
105	`else`	105	`else`
106	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`	106	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`
107	`fi`	107	`fi`
108	`response=0`	108	`response=0`
109	`PTN='^[oOnNyY]?$'`	109	`PTN='^[oOnNyY]?$'`
110	`until [[ "$response" =~ $PTN ]]`	110	`until [[ "$response" =~ $PTN ]]`
111	`do`	111	`do`
112	`read response`	112	`read response`
113	`done`	113	`done`
114	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	114	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
115	`then`	115	`then`
116	`exit 1`	116	`exit 1`
117	`fi`	117	`fi`
118	`fi`	118	`fi`
119	`done`	119	`done`
120	`# fix some RPM versions`	120	`# fix some RPM versions`
121	`echo "/^kernel/" > /etc/urpmi/skip.list`	121	`echo "/^kernel/" > /etc/urpmi/skip.list`
122	`echo "/^freeradius/" >> /etc/urpmi/skip.list`	122	`echo "/^freeradius/" >> /etc/urpmi/skip.list`
123	`echo "/^wkhtmltopdf/" >> /etc/urpmi/skip.list`	123	`echo "/^wkhtmltopdf/" >> /etc/urpmi/skip.list`
124	`echo "/^clamd/" >> /etc/urpmi/skip.list`	124	`echo "/^clamd/" >> /etc/urpmi/skip.list`
125	`echo "/^clamav/" >> /etc/urpmi/skip.list`	125	`echo "/^clamav/" >> /etc/urpmi/skip.list`
126	`# download the kernel used by ALCASAR`	126	`# download the kernel used by ALCASAR`
127	`if [ $Lang == "fr" ]`	127	`if [ $Lang == "fr" ]`
128	`then`	128	`then`
129	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`	129	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`
130	`else`	130	`else`
131	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`	131	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`
132	`fi`	132	`fi`
133	`urpmi --auto --quiet $KERNEL`	133	`urpmi --auto --quiet $KERNEL`
134	`# download updated RPM in cache`	134	`# download updated RPM in cache`
135	`if [ $Lang == "fr" ]`	135	`if [ $Lang == "fr" ]`
136	`then`	136	`then`
137	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`	137	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`
138	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`	138	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`
139	`else`	139	`else`
140	`echo "Updated RPM download. Please wait ..."`	140	`echo "Updated RPM download. Please wait ..."`
141	`echo "You should now take a coffe (or a good beer) ;-)"`	141	`echo "You should now take a coffe (or a good beer) ;-)"`
142	`fi`	142	`fi`
143	`urpmi --auto --auto-update --quiet --test --retry 2`	143	`urpmi --auto --auto-update --quiet --test --retry 2`
144	`if [ "$?" != "0" ]`	144	`if [ "$?" != "0" ]`
145	`then`	145	`then`
146	`echo`	146	`echo`
147	`if [ $Lang == "fr" ]`	147	`if [ $Lang == "fr" ]`
148	`then`	148	`then`
149	`echo "Une erreur a été détectée lors de la récupération des paquetages."`	149	`echo "Une erreur a été détectée lors de la récupération des paquetages."`
150	`else`	150	`else`
151	`echo "An error occurs when downloading RPMS"`	151	`echo "An error occurs when downloading RPMS"`
152	`fi`	152	`fi`
153	`rpm_error`	153	`rpm_error`
154	`exit 1`	154	`exit 1`
155	`fi`	155	`fi`
156		156
157	`# update with cached RPM`	157	`# update with cached RPM`
158	`urpmi --auto --auto-update`	158	`urpmi --auto --auto-update`
159	`if [ "$?" != "0" ]`	159	`if [ "$?" != "0" ]`
160	`then`	160	`then`
161	`echo`	161	`echo`
162	`if [ $Lang == "fr" ]`	162	`if [ $Lang == "fr" ]`
163	`then`	163	`then`
164	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`	164	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`
165	`else`	165	`else`
166	`echo "An error occurs when updating packages"`	166	`echo "An error occurs when updating packages"`
167	`fi`	167	`fi`
168	`rpm_error`	168	`rpm_error`
169	`exit 1`	169	`exit 1`
170	`fi`	170	`fi`
171	`# Clean the RPM cache`	171	`# Clean the RPM cache`
172	`urpmi --clean`	172	`urpmi --clean`
173		173
174	`# Download of ALCASAR specifics RPM in cache (and test)`	174	`# Download of ALCASAR specifics RPM in cache (and test)`
175	`if [ $Lang == "fr" ]`	175	`if [ $Lang == "fr" ]`
176	`then`	176	`then`
177	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`	177	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`
178	`else`	178	`else`
179	`echo "Download of complementary packages. Please wait ..."`	179	`echo "Download of complementary packages. Please wait ..."`
180	`fi`	180	`fi`
181	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`	181	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`
182	`if [ "$?" != "0" ]`	182	`if [ "$?" != "0" ]`
183	`then`	183	`then`
184	`echo`	184	`echo`
185	`if [ $Lang == "fr" ]`	185	`if [ $Lang == "fr" ]`
186	`then`	186	`then`
187	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`	187	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`
188	`else`	188	`else`
189	`echo "An error occurs when downloading complementary packages"`	189	`echo "An error occurs when downloading complementary packages"`
190	`fi`	190	`fi`
191	`rpm_error`	191	`rpm_error`
192	`exit 1`	192	`exit 1`
193	`fi`	193	`fi`
194		194
195	`# update with cached RPM`	195	`# update with cached RPM`
196	`urpmi --auto --no-recommends $PACKAGES`	196	`urpmi --auto --no-recommends $PACKAGES`
197	`if [ "$?" != "0" ]`	197	`if [ "$?" != "0" ]`
198	`then`	198	`then`
199	`echo`	199	`echo`
200	`if [ $Lang == "fr" ]`	200	`if [ $Lang == "fr" ]`
201	`then`	201	`then`
202	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`	202	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`
203	`else`	203	`else`
204	`echo "An error occurs when installing complementary packages"`	204	`echo "An error occurs when installing complementary packages"`
205	`fi`	205	`fi`
206	`rpm_error`	206	`rpm_error`
207	`exit 1`	207	`exit 1`
208	`fi`	208	`fi`
209		209
210	`# Keep only the kernel version we compil netflow with, and remove all others`	210	`# Keep only the kernel version we compil netflow with, and remove all others`
211	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`	211	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`
212	`for i in $kernelVersion`	212	`for i in $kernelVersion`
213	`do`	213	`do`
214	`if [ $i != $KERNEL ];then`	214	`if [ $i != $KERNEL ];then`
215	`urpme --auto $i`	215	`urpme --auto $i`
216	`fi`	216	`fi`
217	`done`	217	`done`
218	`# delete unused RPMs`	218	`# delete unused RPMs`
219	`if [ $Lang == "fr" ]`	219	`if [ $Lang == "fr" ]`
220	`then`	220	`then`
221	`echo "Cleaning the system : "`	221	`echo "Cleaning the system : "`
222	`else`	222	`else`
223	`echo "Nettoyage du système : "`	223	`echo "Nettoyage du système : "`
224	`fi`	224	`fi`
225	`rm_rpm="shorewall mandi plymouth cpupower squid"`	225	`rm_rpm="shorewall mandi plymouth cpupower squid"`
226	`/usr/sbin/urpme --auto -a $rm_rpm`	226	`/usr/sbin/urpme --auto -a $rm_rpm`
227	`/usr/sbin/urpme --auto --auto-orphans`	227	`/usr/sbin/urpme --auto --auto-orphans`
228		228
229	`# Save chilli launch script (erase with new rpm one)`	229	`# Save chilli launch script (erase with new rpm one)`
230	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`	230	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`
231	`# Install home made RPMs`	231	`# Install home made RPMs`
232	for pkg in `ls rpms/$ARCH/*.rpm`	232	for pkg in `ls rpms/$ARCH/*.rpm`
233	`do`	233	`do`
234	`urpmi --no-verify --auto $pkg`	234	`urpmi --no-verify --auto $pkg`
235	`done`	235	`done`
236	`# restore chilli launch script`	236	`# restore chilli launch script`
237	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`	237	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`
238	`# Clean the RPM cache`	238	`# Clean the RPM cache`
239	`urpmi --clean`	239	`urpmi --clean`
240	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`	240	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`
241	`/sbin/depmod -a 2>/dev/null`	241	`/sbin/depmod -a 2>/dev/null`
242	`# test if all needed rpms are correctly installed`	242	`# test if all needed rpms are correctly installed`
243	`count_pkg=0; nb_pkg=0;`	243	`count_pkg=0; nb_pkg=0;`
244	`for pkg in $PACKAGES`	244	`for pkg in $PACKAGES`
245	`do`	245	`do`
246	nb_pkg=`expr $nb_pkg + 1`	246	nb_pkg=`expr $nb_pkg + 1`
247	`if rpm -q --quiet $pkg ; then`	247	`if rpm -q --quiet $pkg ; then`
248	count_pkg=`expr $count_pkg + 1`	248	count_pkg=`expr $count_pkg + 1`
249	`else`	249	`else`
250	`echo "error installing $pkg"`	250	`echo "error installing $pkg"`
251	`fi`	251	`fi`
252	`done`	252	`done`
253	`if [ $count_pkg -ne $nb_pkg ]`	253	`if [ $count_pkg -ne $nb_pkg ]`
254	`then`	254	`then`
255	`exit 1`	255	`exit 1`
256	`fi`	256	`fi`
257	`# test if all custom rpms are correctly installed`	257	`# test if all custom rpms are correctly installed`
258	`count_pkg=0; nb_pkg=0;`	258	`count_pkg=0; nb_pkg=0;`
259	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`	259	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`
260	`do`	260	`do`
261	nb_pkg=`expr $nb_pkg + 1`	261	nb_pkg=`expr $nb_pkg + 1`
262	`if rpm -q --quiet $pkg ; then`	262	`if rpm -q --quiet $pkg ; then`
263	count_pkg=`expr $count_pkg + 1`	263	count_pkg=`expr $count_pkg + 1`
264	`else`	264	`else`
265	`echo "error installing $pkg"`	265	`echo "error installing $pkg"`
266	`fi`	266	`fi`
267	`done`	267	`done`
268	`if [ $count_pkg -ne $nb_pkg ]`	268	`if [ $count_pkg -ne $nb_pkg ]`
269	`then`	269	`then`
270	`exit 1`	270	`exit 1`
271	`fi`	271	`fi`
272	`exit 0`	272	`exit 0`
273		273

Subversion Repositories ALCASAR

(root)/scripts/alcasar-urpmi.sh – Rev 2865 → 2867