Subversion Repositories ALCASAR

Rev

Rev 888 | Rev 916 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log

#/bin/bash
# $Id: alcasar-nf.sh 791 2012-01-13 21:31:36Z richard $

# alcasar-dhcp.sh
# by Rexy
# This script is distributed under the Gnu General Public License (GPL)

# active ou desactive le service DHCP sur le réseau de consultation
# enable or disable the DHCP service on consultation LAN

SED="/bin/sed -i"
CHILLI_CONF_FILE="/etc/chilli.conf"
ALCASAR_CONF_FILE="/usr/local/etc/alcasar.conf"
DNSMASQ_CONF_FILE="/etc/dnsmasq.conf"
ETHERS_FILE="/usr/local/etc/alcasar-ethers"

# define DHCP parameters (LAN side)
PRIVATE_IP_MASK=`grep PRIVATE_IP $ALCASAR_CONF_FILE|cut -d"=" -f2`
PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1`
PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2`                         # network prefix (ie. 24)
PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2`
PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP $PRIVATE_NETMASK| cut -d"=" -f2`
PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP $PRIVATE_NETMASK |cut -d"=" -f2`
PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX                                   # ie.: 192.168.182.0/24
classe=$((PRIVATE_PREFIX/8)); classe_sup=`expr $classe + 1`; classe_sup_sup=`expr $classe + 2`          # ie.: 2=classe B, 3=classe C
PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2`                # private network broadcast (ie.: 192.168.182.255)
private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f$classe_sup`                # last octet of LAN address
private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f$classe_sup`            # last octet of LAN broadcast
PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`         # First network address (ex.: 192.168.182.1)
PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1`      # last network address (ex.: 192.168.182.254)
PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX
tmp_mask=`echo $PRIVATE_NETWORK_MASK|cut -d"/" -f2`; half_mask=`expr $tmp_mask + 1`     # masque du 1/2 réseau de consultation (ex.: 25)
PRIVATE_STAT_IP=$PRIVATE_NETWORK/$half_mask                                             # plage des adresses statiques (ex.: 192.168.182.0/25)
private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f$classe_sup`                # dernier octet de l'@ de réseau
private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f$classe_sup`            # dernier octet de l'@ de broadcast
private_plage=`expr $private_broadcast_ending - $private_network_ending + 1`
private_half_plage=`expr $private_plage / 2`
private_dyn=`expr $private_half_plage + $private_network_ending`
private_dyn_ip_network=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`"."$private_dyn"."`echo $PRIVATE_NETWORK | cut -d"." -f$classe_sup_sup-5`
PRIVATE_DYN_IP=`echo $private_dyn_ip_network | cut -d"." -f1-4`/$half_mask                                      # @ réseau (CIDR) de la plage des adresses dynamiques (ex.: 192.168.182.128/25)
private_dyn_ip_ending=`echo $private_dyn_ip_network | cut -d"." -f4`
PRIVATE_DYN_FIRST_IP=`echo $private_dyn_ip_network | cut -d"." -f1-3`"."`expr $private_dyn_ip_ending + 1`       # 1ère adresse de la plage dynamique (ex.: 192.168.182.129)
PRIVATE_DYN_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1`          # dernière adresse de la plage dynamique (ex.: 192.168.182.254)
EXT_DHCP_IP=`grep DHCP_EXT_IP $ALCASAR_CONF_FILE|cut -d"=" -f2`                         # Adresse du serveur DHCP externe
RELAY_DHCP_IP=$PRIVATE_IP                                                               # Adresse de l'agent Relay : IP interne (défaut 192.168.182.1)
RELAY_DHCP_PORT="67"                                                                    # Port de redirection vers le relay DHCP :  67 par défaut

usage="Usage: alcasar-dhcp.sh {--full | -full} | {--off | -off} | {--half | -half}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
        echo "$usage"
        exit 1
fi
case $args in
        -\? | -h | --h)
                echo "$usage"
                exit 0
                ;;
        --off|-off) # disable DHCP service
                $SED "s?.*statip.*?statip\t\t$PRIVATE_NETWORK_MASK?g" $CHILLI_CONF_FILE
                $SED "s?^#nodynip.*?nodynip?g" $CHILLI_CONF_FILE
                $SED "s?^dynip.*?#dynip?g" $CHILLI_CONF_FILE
                $SED "s?^#dynip.*?#dynip?g" $CHILLI_CONF_FILE
                $SED "s?^DHCP.*?DHCP=off?g" $ALCASAR_CONF_FILE
                if [ $EXT_DHCP_IP != "none" ] 
                then
                      $SED "s?.*dhcpgateway.*?dhcpgateway\t\t$EXT_DHCP_IP?g" $CHILLI_CONF_FILE
                      $SED "s?.*dhcprelayagent.*?dhcprelayagent\t\t$RELAY_DHCP_IP?g" $CHILLI_CONF_FILE
                      $SED "s?.*dhcpgatewayport.*?#dhcpgatewayport\t\t$RELAY_DHCP_PORT?g" $CHILLI_CONF_FILE
                fi
                /etc/init.d/chilli restart
                ;;
        --full|-full) # enable DHCP service on all range of IP addresses
                $SED "s?^.*statip.*?#statip?g" $CHILLI_CONF_FILE
                $SED "s?^nodynip.*?#nodynip?g" $CHILLI_CONF_FILE
                $SED "s?^DHCP.*?DHCP=full?g" $ALCASAR_CONF_FILE
                $SED "s?^dynip.*?dynip\t\t$PRIVATE_NETWORK_MASK?g" $CHILLI_CONF_FILE
                $SED "s?^#dynip.*?dynip\t\t$PRIVATE_NETWORK_MASK?g" $CHILLI_CONF_FILE
                $SED "s?^dhcp_range.*?dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h?g" $DNSMASQ_CONF_FILE
                $SED "s?^dhcpgateway.*?#dhcpgateway\t\t$EXT_DHCP_IP?g" $CHILLI_CONF_FILE
                $SED "s?^dhcprelayagent.*?#dhcprelayagent\t\t$RELAY_DHCP_IP?g" $CHILLI_CONF_FILE
                $SED "s?^dhcpgatewayport.*?#dhcpgatewayport\t\t$RELAY_DHCP_PORT?g" $CHILLI_CONF_FILE
                $SED "s?^EXT_DHCP_IP.*?EXT_DHCP_IP=none?g" $ALCASAR_CONF_FILE
                $SED "s?^RELAY_DHCP_IP.*?RELAY_DHCP_IP=none?g" $ALCASAR_CONF_FILE
                $SED "s?^RELAY_DHCP_PORT.*?RELAY_DHCP_PORT=none?g" $ALCASAR_CONF_FILE
                /etc/init.d/chilli restart
                ;;
        --half|-half) # enable DHCP service on half (upper) range of IP addresses
                $SED "s?.*statip.*?statip\t\t$PRIVATE_STAT_IP?g" $CHILLI_CONF_FILE
                $SED "s?^nodynip.*?#nodynip?g" $CHILLI_CONF_FILE
                $SED "s?^DHCP.*?DHCP=half?g" $ALCASAR_CONF_FILE
                $SED "s?^dynip.*?dynip\t\t$PRIVATE_DYN_IP?g" $CHILLI_CONF_FILE
                $SED "s?^#dynip.*?dynip\t\t$PRIVATE_DYN_IP?g" $CHILLI_CONF_FILE
                $SED "s?^dhcp_range.*?dhcp-range=$PRIVATE_DYN_FIRST_IP,$PRIVATE_DYN_LAST_IP,$PRIVATE_NETMASK,12h?g" $DNSMASQ_CONF_FILE
                $SED "s?^dhcpgateway.*?#dhcpgateway\t\t$EXT_DHCP_IP?g" $CHILLI_CONF_FILE
                $SED "s?^dhcprelayagent.*?#dhcprelayagent\t\t$RELAY_DHCP_IP?g" $CHILLI_CONF_FILE
                $SED "s?^dhcpgatewayport.*?#dhcpgatewayport\t\t$RELAY_DHCP_PORT?g" $CHILLI_CONF_FILE
                $SED "s?^EXT_DHCP_IP.*?EXT_DHCP_IP=none?g" $ALCASAR_CONF_FILE
                $SED "s?^RELAY_DHCP_IP.*?RELAY_DHCP_IP=none?g" $ALCASAR_CONF_FILE
                $SED "s?^RELAY_DHCP_PORT.*?RELAY_DHCP_PORT=none?g" $ALCASAR_CONF_FILE
                /etc/init.d/chilli restart
                ;;
        *)
                echo "Argument inconnu :$1";
                echo "$usage"
                exit 1
                ;;
esac