Subversion Repositories ALCASAR

Rev

Rev 2519 | Rev 2541 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log

#!/bin/bash
#  $Id: alcasar.sh 2521 2018-04-02 19:46:16Z armand.ito $

# alcasar.sh
# ALCASAR is a Free and open source NAC created by Franck BOUIJOUX (3abtux), Pascal LEVANT and Richard REY (Rexy)
# This script is distributed under the Gnu General Public License (GPL)
#  team@alcasar.net

# ALCASAR Install script -  CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]
# Ce programme est un logiciel libre ; This software is free and open source
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
# Voir la Licence Publique Générale GNU pour plus de détails.

# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :

# Coovachilli, freeradius, mariaDB, lighttpd, netfilter, e2guardian, ntpd, openssl, dnsmasq, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump

# Options :
#       -i or --install
#       -u or --uninstall

# Functions :
#       testing                 : connectivity tests, free space test and mageia version test
#       init                    : Installation of RPM and scripts
#       network                 : Network parameters
#       ACC                     : ALCASAR Control Center installation
#       CA                      : Certification Authority initialization
#       time_server             : NTPd configuration
#       init_db                 : Initilization of radius database managed with MariaDB
#       freeradius              : FreeRadius initialisation
#       chilli                  : coovachilli initialisation (+authentication page)
#       e2guardian              : E2Guardian filtering HTTP proxy configuration
#       antivirus               : HAVP + libclamav configuration
#       tinyproxy               : little proxy for user filtered with "WL + antivirus" and "antivirus"
#       ulogd                   : log system in userland (match NFLOG target of iptables)
#       nfsen                   : Configuration of Nfsen Netflow grapher
#       dnsmasq                 : Name server configuration
#       vnstat                  : little network stat daemon
#       BL                      : Adaptation of Toulouse University BlackList : split into 3 BL (for Dnsmasq, for e2guardian and for Netfilter)
#       cron                    : Logs export + watchdog + connexion statistics
#       fail2ban                : Fail2ban IDS installation and configuration
#       gammu_smsd              : Autoregister addon via SMS (gammu-smsd)
#       msec                    : Mandriva security package configuration
#       letsencrypt             : Let's Encrypt client
#       post_install            : Security, log rotation, etc.

DEBUG_ALCASAR='off'; export DEBUG_ALCASAR       # Debug mode = wait (hit key) after each function
DATE=`date '+%d %B %Y - %Hh%M'`
DATE_SHORT=`date '+%d/%m/%Y'`
Lang=`echo $LANG|cut -c 1-2`
mode="install"
# ******* Files parameters - paramètres fichiers *********
DIR_INSTALL=`pwd`                               # current directory
DIR_CONF="$DIR_INSTALL/conf"                    # install directory (with conf files)
DIR_SCRIPTS="$DIR_INSTALL/scripts"              # install directory (with script files)
DIR_BLACKLIST="$DIR_INSTALL/blacklist"          # install directory (with blacklist files)
DIR_SAVE="/var/Save"                            # backup directory (traceability_log, user_db, security_log)
DIR_WEB="/var/www/html"                         # directory of Lighttpd
DIR_DG="/etc/e2guardian"                        # directory of E2Guardian
DIR_ACC="$DIR_WEB/acc"                          # directory of the 'ALCASAR Control Center'
DIR_DEST_BIN="/usr/local/bin"                   # directory of ALCASAR scripts
DIR_DEST_ETC="/usr/local/etc"                   # directory of ALCASAR conf files
DIR_DEST_SHARE="/usr/local/share"               # directory of share files used by ALCASAR (dnsmasq for instance)
CONF_FILE="$DIR_DEST_ETC/alcasar.conf"          # central ALCASAR conf file
PASSWD_FILE="/root/ALCASAR-passwords.txt"       # text file with the passwords and shared secrets
# ******* DBMS parameters - paramètres SGBD ********
DB_RADIUS="radius"                              # database name used by FreeRadius server
DB_USER="radius"                                # user name allows to request the users database
DB_GAMMU="gammu"                                # database name used by Gammu-smsd
# ******* Network parameters - paramètres réseau *******
HOSTNAME="alcasar"                              # default hostname
DOMAIN="localdomain"                            # default local domain
EXTIF=`/usr/sbin/ip route|grep default|head -n1|cut -d" " -f5`                                                  # EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
INTIF=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "lo\|$EXTIF\|tun0"|head -n1|cut -d" " -f2|tr -d ":"`      # INTIF is connected to the consultation network
MTU="1500"
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24"      # Default ALCASAR IP address
# ****** Paths - chemin des commandes *******
SED="/bin/sed -i"
# ****************** End of global parameters *********************

license ()
{
        if [ $Lang == "fr" ]
        then
                cat $DIR_INSTALL/gpl-warning.fr.txt | more
        else
                cat $DIR_INSTALL/gpl-warning.txt | more
        fi
        response=0
        PTN='^[oOyYnN]$'
        until [[ $(expr $response : $PTN) -gt 0 ]]
        do
                if [ $Lang == "fr" ]
                        then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
                        else echo -n "Do you accept the terms of this license (Y/n)? : "
                fi
                read response
        done
        if [ "$response" = "n" ] || [ "$response" = "N" ]
        then
                exit 1
        fi
}

header_install ()
{
        clear
        echo "-----------------------------------------------------------------------------"
        echo "                     ALCASAR V$VERSION Installation"
        echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
        echo "-----------------------------------------------------------------------------"
}

##################################################################
##                      Function "testing"                      ##
## - Test of Mageia version                                     ##
## - Test of ALCASAR version (if already installed)             ##
## - Test of free space on /var  (>10G)                         ##
## - Test of Internet access                                    ##
##################################################################
testing ()
{
# Test of Mageia version
# extract the current Mageia version and hardware architecture (i586 ou X64)
        fic=`cat /etc/product.id`
        unknown_os=0
        old="$IFS"
        IFS=","
        set $fic
        for i in $*
        do
                if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
                        then
                        DISTRIBUTION=`echo $i|cut -d"=" -f2`
                        unknown_os=`expr $unknown_os + 1`
                fi
                if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
                        then
                        CURRENT_VERSION=`echo $i|cut -d"=" -f2`
                        unknown_os=`expr $unknown_os + 1`
                fi
                if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
                        then
                        ARCH=`echo $i|cut -d"=" -f2`
                        unknown_os=`expr $unknown_os + 1`
                fi
        done
        if [ "$ARCH" == "i586" ]
                then
                if [ $Lang == "fr" ]
                        then echo -n "Votre architecture matérielle doit être en 64bits"
                        else echo -n "You hardware architecture must be 64bits"
                fi
                exit 1
        fi
        IFS="$old"
# Test if ALCASAR is already installed
        if [ -e $CONF_FILE ]
        then
                current_version=`grep ^VERSION= $CONF_FILE | cut -d"=" -f2`
                if [ $Lang == "fr" ]
                        then echo -n "La version "; echo -n $current_version ; echo " d'ALCASAR est déjà installée";
                        else echo -n "ALCASAR Version "; echo -n $current_version ; echo " is already installed";
                fi
                response=0
                PTN='^[12]$'
                until [[ $(expr $response : $PTN) -gt 0 ]]
                do
                        if [ $Lang == "fr" ]
                        then
                                echo -n "Tapez '1' pour une mise à jour; Tapez '2' pour une réinstallation : "
                        else
                                echo -n "Hit '1' for an update; Hit '2' for a reinstallation : "
                        fi
                        read response
                done
                if [ "$response" = "2" ]
                then
                        rm -f /tmp/alcasar-conf*
                else
# Retrieve former NICname
                        EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2`                           # EXTernal InterFace
                        INTIF=`grep ^INTIF= $CONF_FILE|cut -d"=" -f2`                           # INTernal InterFace
# Create the current conf file
                        $DIR_SCRIPTS/alcasar-conf.sh --create
                        mode="update"
                fi
        fi
        if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "6" ) ]]
                then
                if [ -e /tmp/alcasar-conf.tar.gz ] # update
                        then
                        echo
                        if [ $Lang == "fr" ]
                                then
                                echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
                                echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"
                                echo "2 - Installez Linux-Mageia 6.0 (64bits) et ALCASAR (cf. doc d'installation)"
                                echo "3 - Importez votre base des usagers"
                        else
                                echo "The automatic update of ALCASAR can't be performed."
                                echo "1 - Save your traceability files and the user database"
                                echo "2 - Install Linux-Mageia 6 (64bits) & ALCASAR (cf. installation doc)"
                                echo "3 - Import your users database"
                        fi
                else
                        if [ $Lang == "fr" ]
                                then
                                echo "L'installation d'ALCASAR ne peut pas être réalisée."
                        else
                                echo "The installation of ALCASAR can't be performed."
                        fi
                fi
                echo
                if [ $Lang == "fr" ]
                        then
                        echo "Le système d'exploitation doit être remplacé (Mageia6-64bits)"
                else
                        echo "The OS must be replaced (Mageia6-64bits)"
                fi
                exit 0
        fi
        if [ ! -d /var/log/netflow/porttracker ]
                then
# Test free space on /var
                free_space=`df -BG --output=avail /var|tail -1|tr -d [:space:]G`
                if [ $free_space -lt 10 ]
                        then
                        if [ $Lang == "fr" ]
                                then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
                                else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
                        fi
                exit 0
                fi
        fi
        if [ $Lang == "fr" ]
                then echo -n "Tests des paramètres réseau : "
                else echo -n "Network parameters tests : "
        fi
# Remove conf file if NIC is not plugged (ie : GSM/WIFI/Bt dongles)
        cd /etc/sysconfig/network-scripts/
        IF_INTERFACES=`ls ifcfg-*|cut -d"-" -f2|grep -v "^lo"|cut -d"*" -f1`
        for i in $IF_INTERFACES
        do
                IP_INTERFACE=`/usr/sbin/ip link|grep $i`
                if [ -z "$IP_INTERFACE" ]
                then
                        rm -f ifcfg-$i

                        if [ $Lang == "fr" ]
                                then echo "Suppression : ifcfg-$i"
                                else echo "Deleting : ifcfg-$i"
                        fi
                fi
        done
        cd $DIR_INSTALL
        echo -n "."
# Test Ethernet NIC links state
        DOWN_IF=`/usr/sbin/ip link|grep "NO-CARRIER"|cut -d":" -f2|tr -d " "|grep -v "^w"`
        for i in $DOWN_IF
        do
                echo $i
                if [ $Lang == "fr" ]
                then
                        echo "Échec"
                        echo "Le lien réseau de la carte $i n'est pas actif."
                        echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
                else
                        echo "Failed"
                        echo "The link state of $i interface is down."
                        echo "Make sure that this network card is connected to a switch or an A.P."
                fi
                exit 0
        done
        echo -n "."
# Test EXTIF config files
        PUBLIC_IP_MASK=`ip addr show $EXTIF|grep "inet "|cut -d" " -f6`
        PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d"/" -f1`
        PUBLIC_GATEWAY=`ip route list|grep $EXTIF|grep ^default|cut -d" " -f3`
        if [ `echo $PUBLIC_IP|wc -c` -lt 7 ] || [ `echo $PUBLIC_GATEWAY|wc -c` -lt 7 ]
        then
                if [ $Lang == "fr" ]
                then
                        echo "Échec"
                        echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
                        echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
                        echo "Appliquez les changements : 'systemctl restart network'"
                else
                        echo "Failed"
                        echo "The Internet connected network card ($EXTIF) isn't well configured."
                        echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
                        echo "Apply the new configuration 'systemctl restart network'"
                fi
                echo "DEVICE=$EXTIF"
                echo "IPADDR="
                echo "NETMASK="
                echo "GATEWAY="
                echo "DNS1="
                echo "DNS2="
                echo "ONBOOT=yes"
                exit 0
        fi
        echo -n "."
# Test if default GW is set on EXTIF (router or ISP provider equipment)
        if [ `ip route list|grep $EXTIF|grep -c ^default` -ne "1" ] ; then
                if [ $Lang == "fr" ]
                then
                        echo "Échec"
                        echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
                        echo "Réglez ce problème puis relancez ce script."
                else
                        echo "Failed"
                        echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
                        echo "Resolv this problem, then restart this script."
                fi
                exit 0
        fi
        echo -n "."
# Test if default GW is alive
        arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
        if [ $(expr $arp_reply) -eq 0 ]
                then
                if [ $Lang == "fr" ]
                then
                        echo "Échec"
                        echo "Le routeur de sortie ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
                        echo "Réglez ce problème puis relancez ce script."
                else
                        echo "Failed"
                        echo "The Internet gateway or the ISP equipment ($PUBLIC_GATEWAY) doesn't answered."
                        echo "Resolv this problem, then restart this script."
                fi
                exit 0
        fi
        echo -n "."
# Test Internet connectivity
        rm -rf /tmp/con_ok.html
        /usr/bin/curl www.google.fr -s -o /tmp/con_ok.html
        if [ ! -e /tmp/con_ok.html ]
        then
                if [ $Lang == "fr" ]
                then
                        echo "La tentative de connexion vers Internet a échoué (google.fr)."
                        echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
                        echo "Vérifiez la validité des adresses IP des DNS."
                else
                        echo "The Internet connection try failed (google.fr)."
                        echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
                        echo "Verify the DNS IP addresses"
                fi
                exit 0
        fi
        rm -rf /tmp/con_ok.html
        echo ". : ok"
} # end of testing ()

##################################################################
##                      Function "init"                         ##
## - Création du fichier "/root/ALCASAR_parametres.tx          ##
## - Installation et modification des scripts du portail        ##
##################################################################
init ()
{
        if [ "$mode" != "update" ]
        then
# On affecte le nom d'organisme
                header_install
                ORGANISME=!
                PTN='^[a-zA-Z0-9-]*$'
                until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
                do
                        if [ $Lang == "fr" ]
                                then echo -n "Entrez le nom de votre organisme : "
                                else echo -n "Enter the name of your organism : "
                        fi
                        read ORGANISME
                        if [ "$ORGANISME" == "" ]
                                then
                                ORGANISME=!
                        fi
                done
        fi
# On crée aléatoirement les mots de passe et les secrets partagés
# We create random passwords and shared secrets
        rm -f $PASSWD_FILE
        echo "#####  ALCASAR ($ORGANISME) security passwords  #####" > $PASSWD_FILE
        grub2pwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
        pbkdf2=`( echo $grub2pwd ; echo $grub2pwd ) | \
                LC_ALL=C /usr/bin/grub2-mkpasswd-pbkdf2 | \
                grep -v '[eE]nter password:' | \
                sed -e "s/PBKDF2 hash of your password is //"`
        echo "GRUB2_PASSWORD=$pbkdf2" > /boot/grub2/user.cfg
        [ -e /root/grub.default ] || cp /etc/grub.d/10_linux /root/grub.default
        cp -f $DIR_CONF/grub-10_linux /etc/grub.d/10_linux  # Request password only on menu editing attempts (not when selecting an entry)
        chmod 0600 /boot/grub2/user.cfg
        echo "# Login name and password to protect GRUB2 boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
        echo "GRUB2_user=root" >> $PASSWD_FILE
        echo "GRUB2_password=$grub2pwd" >> $PASSWD_FILE
        mysqlpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c16`
        echo "# Login name and Password of MariaDB administrator:" >> $PASSWD_FILE
        echo "db_root=$mysqlpwd" >> $PASSWD_FILE
        radiuspwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c16`
        echo "# Login name and password of MariaDB user:" >> $PASSWD_FILE
        echo "db_user=$DB_USER" >> $PASSWD_FILE
        echo "db_password=$radiuspwd" >> $PASSWD_FILE
        secretuam=`cat /dev/urandom | tr -dc [:alnum:] | head -c16`
        echo "# Shared secret between the script 'intercept.php' and coova-chilli:" >> $PASSWD_FILE
        echo "secret_uam=$secretuam" >> $PASSWD_FILE
        secretradius=`cat /dev/urandom | tr -dc [:alnum:] | head -c16`
        echo "# Shared secret between coova-chilli and FreeRadius:" >> $PASSWD_FILE
        echo "secret_radius=$secretradius" >> $PASSWD_FILE
        chmod 640 $PASSWD_FILE
#  copy scripts in in /usr/local/bin
        cp -f $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown root:root $DIR_DEST_BIN/alcasar* ; chmod 740 $DIR_DEST_BIN/alcasar*
#  copy conf files in /usr/local/etc
        cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*
        $SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
# generate central conf file
        cat <<EOF > $CONF_FILE
##########################################
##                                      ##
##          ALCASAR Parameters          ##
##                                      ##
##########################################

INSTALL_DATE=$DATE
VERSION=$VERSION
ORGANISM=$ORGANISME
HOSTNAME=$HOSTNAME
DOMAIN=$DOMAIN
EOF
        chmod o-rwx $CONF_FILE
} # End of init ()

##################################################################
##                      Function "network"                      ##
## - Définition du plan d'adressage du réseau de consultation ##
## - Nommage DNS du système                                    ##
## - Configuration de l'interface INTIF (réseau de consultation)##
## - Modification du fichier /etc/hosts                         ##
## - Renseignement des fichiers hosts.allow et hosts.deny       ##
##################################################################
network ()
{
        header_install
        if [ "$mode" != "update" ]
                then
                if [ $Lang == "fr" ]
                        then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
                        else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
                fi
                response=0
                PTN='^[oOyYnN]$'
                until [[ $(expr $response : $PTN) -gt 0 ]]
                do
                        if [ $Lang == "fr" ]
                                then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
                                else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
                        fi
                        read response
                done
                if [ "$response" = "n" ] || [ "$response" = "N" ]
                then
                        PRIVATE_IP_MASK="0"
                        PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
                        until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
                        do
                                if [ $Lang == "fr" ]
                                        then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
                                        else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
                                fi
                                read PRIVATE_IP_MASK
                        done
                else
                                PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
                fi
        else
                PRIVATE_IP_MASK=`grep ^PRIVATE_IP= conf/etc/alcasar.conf|cut -d"=" -f2`
                rm -rf conf/etc/alcasar.conf
        fi
# Define LAN side global parameters
        hostnamectl set-hostname $HOSTNAME.$DOMAIN
        PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2`                               # private network address (ie.: 192.168.182.0)
        private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4`                                  # last octet of LAN address
        PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2`                               # private network mask (ie.: 255.255.255.0)
        PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2`                                 # network prefix (ie. 24)
        PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1`                                              # ALCASAR private ip address (consultation LAN side)
        if [ $PRIVATE_IP == $PRIVATE_NETWORK ]                                                          # when entering network address instead of ip address
                then
                PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`
                PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
        fi
        private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4`                                            # last octet of LAN address
        PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1`          # second network address (ex.: 192.168.182.2)
        PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX                                           # ie.: 192.168.182.0/24
        classe=$((PRIVATE_PREFIX/8))                                                                    # ie.: 2=classe B, 3=classe C
        PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`.                          # compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
        PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2`                        # private network broadcast (ie.: 192.168.182.255)
        private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f4`                              # last octet of LAN broadcast
        PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1` # First network address (ex.: 192.168.182.1)
        PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1`      # last network address (ex.: 192.168.182.254)
        PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'`      # MAC address of INTIF
# Define Internet parameters
        if [ "$mode" != "update" ]
        then
                DNS1=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS1='| cut -d"=" -f2`   # 1st DNS server
                DNS2=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS2=' | cut -d"=" -f2`  # 2nd DNS server
        else
                DNS1=`cat /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF | grep '^DNS1=' | cut -d"=" -f2`  # 1st DNS server
                DNS2=`cat /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF | grep '^DNS2=' | cut -d"=" -f2`  # 2nd DNS server
        fi
        if [ "$DNS1" == "" ]
        then
                if [ $Lang == "fr" ]
                then
                        echo "L'adresse IP des serveurs DNS ne sont pas corrects"
                        echo "Vérifiez la configuration de la carte réseau externe ($EXTIF)"
                else
                        echo "The IP address of DNS servers are not set correctly"
                        echo "Check the extern network card configuration ($EXTIF)"
                fi
                exit 0
        fi
        DNS1=${DNS1:=208.67.220.220}
        DNS2=${DNS2:=208.67.222.222}
        PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
        PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
        PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
# Wrtie the conf file
        echo "EXTIF=$EXTIF" >> $CONF_FILE
        echo "INTIF=$INTIF" >> $CONF_FILE
        ######## Récupération des interfaces du ou des réseaux de consultation supplémentaires #################
        INTERFACES=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "^lo\|$EXTIF\|tun0"|cut -d " " -f2|tr -d ":"`

        for i in $INTERFACES
        do
                SUB=`echo ${i:0:2}`
                if [ $SUB = "wl" ]
                        then WIFIF=$i
                elif [ "$i" != "$INTIF" ] && [ $SUB != "ww" ]
                        then LANIF=$i
                fi
        done

        if [ -n "$WIFIF" ]
                then echo "WIFIF=$WIFIF" >> $CONF_FILE
        elif [ -n "$LANIF" ]
                then echo "LANIF=$LANIF" >> $CONF_FILE
        fi
        #########################################################################################################

        IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2`           # IP setting (static or dynamic)
        if [ $IP_SETTING == "dhcp" ]
                then
                echo "PUBLIC_IP=dhcp" >> $CONF_FILE
                echo "GW=dhcp" >> $CONF_FILE
        else
                echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
                echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
        fi
        echo "DNS1=$DNS1" >> $CONF_FILE
        echo "DNS2=$DNS2" >> $CONF_FILE
        echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
        echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
        echo "DHCP=on" >> $CONF_FILE
        echo "EXT_DHCP_IP=none" >> $CONF_FILE
        echo "RELAY_DHCP_IP=none" >> $CONF_FILE
        echo "RELAY_DHCP_PORT=none" >> $CONF_FILE
        echo "INT_DNS_DOMAIN=none" >> $CONF_FILE
        echo "INT_DNS_IP=none" >> $CONF_FILE
        echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
# network default
        [ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
        cat <<EOF > /etc/sysconfig/network
NETWORKING=yes
FORWARD_IPV4=true
EOF
# /etc/hosts config
        [ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
        cat <<EOF > /etc/hosts
127.0.0.1       localhost
$PRIVATE_IP     $HOSTNAME.$DOMAIN $HOSTNAME
EOF
# EXTIF (Internet) config
        [ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
        if [ $IP_SETTING == "dhcp" ]
                then
                cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=dhcp
DNS1=127.0.0.1
PEERDNS=no
RESOLV_MODS=yes
ONBOOT=yes
NOZEROCONF=yes
METRIC=10
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
                else
                cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=static
IPADDR=$PUBLIC_IP
NETMASK=$PUBLIC_NETMASK
GATEWAY=$PUBLIC_GATEWAY
DNS1=127.0.0.1
RESOLV_MODS=yes
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
        fi
# Config INTIF (consultation LAN) in normal mode
        cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
        cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
# Config of INTIF in bypass mode (see "alcasar-bypass.sh")
        cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
IPADDR=$PRIVATE_IP
NETMASK=$PRIVATE_NETMASK
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
######### Config WIFIF (consultation WIFI) ou LANIF (consultation LAN) in normal mode #################
        if [ -n "$WIFIF" ] && [ "$WIFIF" != "$INTIF" ]
        then
                cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$WIFIF
DEVICE=$WIFIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
        elif [ -n "$LANIF" ]
        then
                cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$LANIF
DEVICE=$LANIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
        fi
        #########################################################################################################
# Renseignement des fichiers hosts.allow et hosts.deny
        [ -e /etc/hosts.allow.default ]  || cp /etc/hosts.allow /etc/hosts.allow.default
        cat <<EOF > /etc/hosts.allow
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
sshd: ALL
ntpd: $PRIVATE_NETWORK_SHORT
EOF
        [ -e /etc/host.deny.default ]  || cp /etc/hosts.deny /etc/hosts.deny.default
        cat <<EOF > /etc/hosts.deny
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
EOF
        chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
        echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
# load conntrack ftp module
        [ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
        echo "nf_conntrack_ftp" >>  /etc/modprobe.preload
# load ipt_NETFLOW module
        echo "ipt_NETFLOW" >>  /etc/modprobe.preload
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
#
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
} # End of network ()

##################################################################
##                      Function "ACC"                          ##
## - installation of then ALCASAR Control Center (ACC)  )       ##
## - configuration of the web server (Lighttpd)                 ##
## - creation of the first ACC admin account                    ##
## - secure the access                                          ##
##################################################################
ACC ()
{
        [ -d $DIR_WEB ] && rm -rf $DIR_WEB
        mkdir $DIR_WEB
# Copy & adapt ACC files
        cp -rf $DIR_INSTALL/web/* $DIR_WEB/
        $SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
        $SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
        $SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
        $SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
        chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
        chown -R apache:apache $DIR_WEB/*
# copy & adapt "freeradius-web" files
        cp -rf $DIR_CONF/freeradius-web/ /etc/
        [ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
        $SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
        $SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
        $SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
        cat <<EOF > /etc/freeradius-web/naslist.conf
nas1_name: alcasar-$ORGANISME
nas1_model: Network Access Controler
nas1_ip: $PRIVATE_IP
nas1_port_num: 0
nas1_community: public
EOF
        chown -R apache:apache /etc/freeradius-web/
# create the log & backup structure :
# - base = users database
# - archive = tarball of "base + http firewall + netflow"
# - security = watchdog log
        for i in base archive security activity_report;
        do
                [ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
        done
        chown -R root:apache $DIR_SAVE
# Configuring & securing php
        [ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
        timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
        $SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
        $SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
        $SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
        $SED "s?^display_errors.*?display_errors = Off?" /etc/php.ini
        $SED "s?^display_startup_errors.*?display_startup_errors = Off?" /etc/php.ini
        $SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
        $SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
        $SED "s?^allow_url_fopen.*?allow_url_fopen = Off?" /etc/php.ini
# Configuring & securing Lighttpd
        rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
        [ -e /etc/lighttpd/lighttpd.conf.default ] || cp /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.default
        [ -e /etc/lighttpd/modules.conf.default ] || cp /etc/lighttpd/modules.conf /etc/lighttpd/modules.conf.default
        [ -e /etc/lighttpd/conf.d/fastcgi.conf.default ] || cp /etc/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf.default
        [ -e /etc/php-fpm.conf ] || cp /etc/php-fpm.conf /etc/php-fpm.conf.default
        [ -d /etc/lighttpd/vhosts.d ] || mkdir /etc/lighttpd/vhosts.d

        cp $DIR_CONF/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf
        cp $DIR_CONF/lighttpd/vhosts.d/alcasar.conf /etc/lighttpd/vhosts.d/alcasar.conf

        $SED "s?^;listen\.owner.*?listen\.owner = apache?g" /etc/php-fpm.conf
        $SED "s?^;listen\.group.*?listen\.group = apache?g" /etc/php-fpm.conf
        $SED "s?^;listen\.mode.*?listen\.mode = 0660?g" /etc/php-fpm.conf

        $SED "s?^server\.use-ipv6.*?server\.use-ipv6 = \"disable\"?g" /etc/lighttpd/lighttpd.conf
        $SED "s?^#server\.bind.*?server\.bind = \"$HOSTNAME.$DOMAIN\"?g" /etc/lighttpd/lighttpd.conf
        $SED "s?^#server\.tag.*?server\.tag = \"\"?g" /etc/lighttpd/lighttpd.conf
        echo "include \"vhosts.d/alcasar.conf\"" >> /etc/lighttpd/lighttpd.conf

        $SED "s?^#[ ]*\"mod_auth\",.*? \"mod_auth\",?g" /etc/lighttpd/modules.conf
        $SED "s?^#[ ]*\"mod_alias\",.*? \"mod_alias\",?g" /etc/lighttpd/modules.conf
        $SED "s?^#[ ]*\"mod_redirect\",.*? \"mod_redirect\",?g" /etc/lighttpd/modules.conf
        $SED "s?^#include \"conf.d/fastcgi.conf\".*?include \"conf.d/fastcgi.conf\"?g" /etc/lighttpd/modules.conf

        $SED "s?^server\.bind.*?server\.bind = \"$HOSTNAME.$DOMAIN\"?g" /etc/lighttpd/lighttpd.conf
        $SED 's/^$SERVER\["socket"\] == ".*:443.*/$SERVER\["socket"\] == "'"$HOSTNAME.$DOMAIN"':443" {/g' /etc/lighttpd/vhosts.d/alcasar.conf
        $SED "s/^\([\t ]*\)var.server_name.*/\1var.server_name = \"$HOSTNAME.$DOMAIN\"/g" /etc/lighttpd/vhosts.d/alcasar.conf

        /usr/bin/systemctl start lighttpd
        /usr/bin/systemctl start php-fpm

# Définition du premier compte lié au profil 'admin'
        if [ "$mode" = "install" ]
                then
                        header_install
# Creation of keys file for the admin account ("admin")
                        [ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
                        mkdir -p $DIR_DEST_ETC/digest
                        chmod 755 $DIR_DEST_ETC/digest
                        until [ -s $DIR_DEST_ETC/digest/key_admin ]
                        do
                                $DIR_DEST_BIN/alcasar-profil.sh --add admin
                        done
        fi

        # Launch after coova (in order to wait tun0 to be up)
        $SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/lighttpd.service
        # Log file for ACC access imputability
        [ -e /var/Save/security/acc_access.log ] || touch /var/Save/security/acc_access.log
        chown root:apache /var/Save/security/acc_access.log
        chmod 664 /var/Save/security/acc_access.log
} # End of ACC ()

##########################################################################
##                              Fonction "CA"                           ##
## - Creating the CA and the server certificate (lighttpd)              ##
##########################################################################
CA ()
{
        $DIR_DEST_BIN/alcasar-CA.sh

        chown -R root:apache /etc/pki
        chmod -R 750 /etc/pki
} # End of CA ()

##################################################################
##                    Function "time_server"                    ##
## - Configuring NTP server                                     ##
##################################################################
time_server ()
{
# Set the Internet time server
        [ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
        cat <<EOF > /etc/ntp/step-tickers
0.fr.pool.ntp.org       # adapt to your country
1.fr.pool.ntp.org
2.fr.pool.ntp.org
EOF
        [ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
        cat <<EOF > /etc/ntp.conf
server 0.fr.pool.ntp.org        # adapt to your country
server 1.fr.pool.ntp.org
server 2.fr.pool.ntp.org
server 127.127.1.0              # local clock si NTP internet indisponible ...
fudge 127.127.1.0 stratum 10
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
restrict 127.0.0.1
driftfile /var/lib/ntp/drift
logfile /var/log/ntp.log
disable monitor
EOF
        chown -R ntp:ntp /var/lib/ntp
# Synchronize now
        ntpd -q -g &
} # End of time_server ()

##########################################################################################
##                      Fonction "init_db"                                              ##
## - Initialisation de la base Mysql                                                    ##
## - Affectation du mot de passe de l'administrateur (root)                             ##
## - Suppression des bases et des utilisateurs superflus                                ##
## - Création de la base 'radius'                                                      ##
## - Installation du schéma de cette base                                              ##
## - Import des tables de comptabilité (mtotacct, totacct) et info_usagers (userinfo)  ##
##       ces table proviennent de 'dialupadmin' (paquetage freeradius-web)              ##
##########################################################################################
init_db ()
{
        if [ `systemctl is-active mysqld` == "active" ]
        then
                systemctl stop mysqld
        fi
        rm -rf /var/lib/mysql # to be sure that there is no former installation
        [ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
        $SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
        $SED "s?^port.*?#&?g" /etc/my.cnf # we use unix socket only
        $SED "s?^;collation_server =.*?collation_server = utf8_unicode_ci?g" /etc/my.cnf
        $SED "s?^;character_set_server =.*?character_set_server = utf8?g" /etc/my.cnf  # accentuated user names are allowed
        $SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/feedback.cnf # remove the feedback plugin (ALCASAR doesn't report anything !)
        /usr/sbin/mysqld-prepare-db-dir > /dev/null 2>&1
        /usr/bin/systemctl set-environment MYSQLD_OPTS="--skip-grant-tables --skip-networking"
        /usr/bin/systemctl start mysqld
        nb_round=1
        while [ ! -S /var/lib/mysql/mysql.sock ] && [ $nb_round -lt 10 ] # we wait until mariadb is on
        do
                nb_round=`expr $nb_round + 1`
                sleep 2
        done
        if [ ! -S /var/lib/mysql/mysql.sock ]
        then
                echo "Problème : la base données 'MariaDB' ne s'est pas lancée !"
                exit
        fi
        MYSQL="/usr/bin/mysql --execute"
# Secure the server
        $MYSQL="GRANT ALL PRIVILEGES ON *.* TO root@'localhost' IDENTIFIED BY '$mysqlpwd';"
        MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
        $MYSQL="DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
        $MYSQL="CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;"
# Create 'radius' database
        $MYSQL="CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
# Add an empty radius database structure
        mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
# modify the start script in order to close accounting connexion when the system is comming down or up
        [ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
        $SED "/^ExecStart=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
        $SED "/^ExecStop=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
        /usr/bin/systemctl unset-environment MYSQLD_OPTS
        /usr/bin/systemctl daemon-reload
} # End of init_db ()

###################################################################
##                       Function "freeradius"                   ##
## - Set the configuration files                                 ##
## - Set the shared secret between coova-chilli and freeradius   ##
## - Adapt the Mysql conf file and counters                      ##
###################################################################
freeradius ()
{
        cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
        chown -R radius:radius /etc/raddb
        [ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
# Set radius global parameters (radius.conf)
        $SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
        $SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
        $SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
        $SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf # remove the proxy function
        $SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf # remove the proxy function

# Add ALCASAR dictionary
        cp $DIR_CONF/radius/dictionary.alcasar /usr/share/freeradius/dictionary.alcasar
        echo -e '\n$INCLUDE dictionary.alcasar' >> /usr/share/freeradius/dictionary
# Add CoovaChilli dictionary
        cp /usr/share/doc/coova-chilli/dictionary.coovachilli /usr/share/freeradius/dictionary.coovachilli
        echo -e '\n$INCLUDE dictionary.coovachilli' >> /usr/share/freeradius/dictionary
# Set "client.conf" to describe radius clients (coova on 127.0.0.1)
        [ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
        cat << EOF > /etc/raddb/clients.conf
client localhost {
        ipaddr = 127.0.0.1
        secret = $secretradius
        shortname = chilli
        nas_type = other
}
EOF
# Set Virtual server (remvove all except "alcasar virtual site")
        rm -f /etc/raddb/sites-enabled/*
        cp $DIR_CONF/radius/alcasar /etc/raddb/sites-available/alcasar
        cp $DIR_CONF/radius/alcasar-with-ldap /etc/raddb/sites-available/alcasar-with-ldap
        chown radius:apache /etc/raddb/sites-available/alcasar*
        chmod 660 /etc/raddb/sites-available/alcasar*
        ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
# INFO : To connect from outside (EAP), add the EAP virtual server (link in sites-enabled) and inner-tunnel modules (link in mods-enabled)

# Set modules
# Add custom LDAP "available module"
        cp -f $DIR_CONF/radius/ldap-alcasar /etc/raddb/mods-available/
        chown -R radius:radius /etc/raddb/mods-available/ldap-alcasar
# Set only usefull modules for ALCASAR (ldap is enabled only via ACC)
        rm -rf  /etc/raddb/mods-enabled/*
        for mods in sql sqlcounter attr_filter expiration logintime pap expr
        do
                ln -s /etc/raddb/mods-available/$mods /etc/raddb/mods-enabled/$mods
        done
# Configure SQL mod
        [ -e /etc/raddb/mods-available/sql.default ] || cp /etc/raddb/mods-available/sql /etc/raddb/mods-available/sql.default
        $SED "s?^[\t ]*driver =.*?driver = \"rlm_sql_mysql\"?g" /etc/raddb/mods-available/sql
        $SED "s?^[\t ]*dialect =.*?dialect = \"mysql\"?g" /etc/raddb/mods-available/sql
        $SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/mods-available/sql
        $SED "s?^#[\t ]*server =.*?server = \"localhost\"?g" /etc/raddb/mods-available/sql
        $SED "s?^#[\t ]*port =.*?port = \"3306\"?g" /etc/raddb/mods-available/sql
        $SED "s?^#[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/mods-available/sql
        $SED "s?^#[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/mods-available/sql
# queries.conf modifications : case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.
        [ -e /etc/raddb/mods-config/sql/main/mysql/queries.conf.default ] || cp /etc/raddb/mods-config/sql/main/mysql/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf.default
        cp -f $DIR_CONF/radius/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf
        chown -R radius:radius /etc/raddb/mods-config/sql/main/mysql/queries.conf
# sqlcounter modifications
        [ -e /etc/raddb/mods-available/sqlcounter.default ] || cp /etc/raddb/mods-available/sqlcounter /etc/raddb/mods-available/sqlcounter.default
        cp -f $DIR_CONF/radius/sqlcounter /etc/raddb/mods-available/sqlcounter
        chown -R radius:radius /etc/raddb/mods-available/sqlcounter
        [ -e /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf.default ] || cp /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf.default
        cat << EOF > /etc/raddb/mods-config/sql/counter/mysql/dailycounter.conf
query = "\
    SELECT IFNULL((SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)),0)) \
    FROM radacct \
    WHERE username = '%{\${key}}' \
    AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'),0)"
EOF
        [ -e /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf.default ] || cp /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf.default
        cat << EOF > /etc/raddb/mods-config/sql/counter/mysql/monthlycounter.conf
query = "\
    SELECT IFNULL((SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) \
    FROM radacct \
    WHERE username='%{\${key}}' \
    AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'),0)"
EOF
        [ -e /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf.default ] || cp /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf.default
        cat << EOF > /etc/raddb/mods-config/sql/counter/mysql/noresetcounter.conf
query = "\
    SELECT IFNULL(SUM(AcctSessionTime),0) \
    FROM radacct \
    WHERE username='%{\${key}}'"
EOF
        [ -e /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf.default ] || cp /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf.default
        cat << EOF > /etc/raddb/mods-config/sql/counter/mysql/expire_on_login.conf
query = "\
    SELECT IFNULL((SELECT TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime)) \
    FROM radacct \
    WHERE username='%{\${key}}' \
    ORDER BY acctstarttime \
    LIMIT 1),0)"
EOF
# make certain that mysql is up before freeradius start
        [ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
        $SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
        /usr/bin/systemctl daemon-reload
 # Allow apache to change some conf files (ie : ldap on/off)
 chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/mods-available

} # End freeradius ()

#############################################################################
##                              Fonction "chilli"                          ##
## - Creation of the conf file and init file (systemd) for coova-chilli    ##
## - Adapt the authentication web page (intercept.php)                     ##
#############################################################################
chilli ()
{
# chilli unit for systemd
        cat << EOF > /lib/systemd/system/chilli.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
[Unit]
Description=chilli is a captive portal daemon
After=network.target

[Service]
Type=forking
ExecStart=/usr/libexec/chilli start
ExecStop=/usr/libexec/chilli stop
ExecReload=/usr/libexec/chilli reload
PIDFile=/var/run/chilli.pid

[Install]
WantedBy=multi-user.target
EOF
# init file creation
        [ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
        cat <<EOF > /etc/init.d/chilli
#!/bin/sh
#
# chilli CoovaChilli init
#
# chkconfig: 2345 65 35
# description: CoovaChilli
### BEGIN INIT INFO
# Provides:       chilli
# Required-Start: network
# Should-Start:
# Required-Stop:  network
# Should-Stop:
# Default-Start:  2 3 5
# Default-Stop:
# Description:    CoovaChilli access controller
### END INIT INFO

[ -f /usr/sbin/chilli ] || exit 0
. /etc/init.d/functions
CONFIG=/etc/chilli.conf
pidfile=/var/run/chilli.pid
[ -f \$CONFIG ] || {
        echo "\$CONFIG Not found"
        exit 0
}
current_users_file="/var/tmp/havp/current_users.txt"    # file containing active users
RETVAL=0
prog="chilli"
case \$1 in
        start)
                if [ -f \$pidfile ] ; then
                        gprintf "chilli is already running"
                else
                        gprintf "Starting \$prog: "
                        echo '' > \$current_users_file && chown apache:apache \$current_users_file
                        rm -f /var/run/chilli* # cleaning
                        /usr/sbin/modprobe tun >/dev/null 2>&1
                        echo 1 > /proc/sys/net/ipv4/ip_forward
                        [ -e /dev/net/tun ] || {
                                (cd /dev;
                                mkdir net;
                                cd net;
                                mknod tun c 10 200)
                        }
                        ifconfig $INTIF 0.0.0.0
                        /usr/sbin/ethtool -K $INTIF gro off
                        daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
                        RETVAL=\$?
                fi
                ;;

        reload)
                killall -HUP chilli
                ;;

        restart)
                \$0 stop
                sleep 2
                \$0 start
                ;;

        status)
                status chilli
                RETVAL=0
                ;;

        stop)
                if [ -f \$pidfile ] ; then
                        gprintf "Shutting down \$prog: "
                        killproc /usr/sbin/chilli
                        RETVAL=\$?
                        [ \$RETVAL = 0 ] && rm -f \$pidfile
                        [ -e \$current_users_file ] && rm -f \$current_users_file
                else
                        gprintf "chilli is not running"
                fi
                ;;

        *)
                echo "Usage: \$0 {start|stop|restart|reload|status}"
                exit 1
esac
echo
EOF
        chmod a+x /etc/init.d/chilli
        ln -s /etc/init.d/chilli /usr/libexec/chilli
# conf file creation
        [ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
        #NTP Option configuration for DHCP
        #DHCP Options : rfc2132
                #dhcp option value will be convert in hexa.
                #NTP option (or 'option 42') is like :
                #
                #    Code   Len         Address 1               Address 2
                #   +-----+-----+-----+-----+-----+-----+-----+-----+--
                #   |  42 |  n  |  a1 |  a2 |  a3 |  a4 |  a1 |  a2 |  ...
                #   +-----+-----+-----+-----+-----+-----+-----+-----+--
                #
                #Code : 42 => 2a
                #Len : 4 => 04
        PRIVATE_IP_HEXA=$(printf "%02x\n" $(echo $PRIVATE_IP | cut -d'.' -f1))$(printf "%02x\n" $(echo $PRIVATE_IP | cut -d'.' -f2))$(printf "%02x\n" $(echo $PRIVATE_IP | cut -d'.' -f3))$(printf "%02x\n" $(echo $PRIVATE_IP | cut -d'.' -f4))
        cat <<EOF > /etc/chilli.conf
# coova config for ALCASAR
cmdsocket       /var/run/chilli.sock
unixipc         chilli.$INTIF.ipc
pidfile         /var/run/chilli.pid
net             $PRIVATE_NETWORK_MASK
dhcpif          $INTIF
ethers          $DIR_DEST_ETC/alcasar-ethers
#nodynip
#statip
dynip           $PRIVATE_NETWORK_MASK
domain          $DOMAIN
dns1            $PRIVATE_IP
dns2            $PRIVATE_IP
uamlisten       $PRIVATE_IP
uamport         3990
uamuiport       3991
macauth
macpasswd       password
strictmacauth
locationname    $HOSTNAME.$DOMAIN
radiusserver1   127.0.0.1
radiusserver2   127.0.0.1
radiussecret    $secretradius
radiusauthport  1812
radiusacctport  1813
uamserver       https://$HOSTNAME.$DOMAIN/intercept.php
redirurl
radiusnasid     $HOSTNAME.$DOMAIN
uamsecret       $secretuam
uamallowed      $HOSTNAME,$HOSTNAME.$DOMAIN
coaport         3799
conup           $DIR_DEST_BIN/alcasar-conup.sh
condown         $DIR_DEST_BIN/alcasar-condown.sh
include         $DIR_DEST_ETC/alcasar-uamallowed
include         $DIR_DEST_ETC/alcasar-uamdomain
dhcpopt         2a04$PRIVATE_IP_HEXA
#dhcpgateway            none
#dhcprelayagent         none
#dhcpgatewayport        none
sslkeyfile      /etc/pki/tls/private/alcasar.key
sslcertfile     /etc/pki/tls/certs/alcasar.crt
redirssl
uamuissl
EOF
# create files for "DHCP static ip" and "DHCP static ip info". Reserve the second IP address for INTIF (the first one is for tun0)
        echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
        echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers-info
# create files for trusted domains and urls
        touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
        chown root:apache $DIR_DEST_ETC/alcasar-*
        chmod 660 $DIR_DEST_ETC/alcasar-*
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
        $SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
# user 'chilli' creation (in order to run conup/off and up/down scripts
        chilli_exist=`grep -c ^chilli: /etc/passwd`
        if [ "$chilli_exist" == "1" ]
        then
                userdel -r chilli 2>/dev/null
        fi
        groupadd -f chilli
        useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
}  # End of chilli ()

##################################################################
##                   Function "e2guardian"                    ##
## - Set the parameters of this HTML proxy (as controler)       ##
##################################################################
e2guardian ()
{
        mkdir -p /var/e2guardian /var/log/e2guardian
        chown -R e2guardian /var/e2guardian /var/log/e2guardian
        $SED "s?^ExecStart=.*?ExecStart=/usr/sbin/e2guardian -c /etc/e2guardian/e2guardian.conf?g" /lib/systemd/system/e2guardian.service
        $SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/e2guardian.service
        [ -e $DIR_DG/e2guardian.conf.default ] || cp $DIR_DG/e2guardian.conf $DIR_DG/e2guardian.conf.default
# By default the filter is off
        $SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/e2guardian.conf
# French deny HTML page
        $SED "s?^language =.*?language = french?g" $DIR_DG/e2guardian.conf
# Listen only on LAN side
        $SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/e2guardian.conf
# DG send its flow to HAVP
        $SED "s?^proxyport.*?proxyport = 8090?g" $DIR_DG/e2guardian.conf
# replace the default deny HTML page
        cp -f $DIR_CONF/template.html /usr/share/e2guardian/languages/ukenglish/
        cp -f $DIR_CONF/template-fr.html /usr/share/e2guardian/languages/french/template.html
# Don't log
        $SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/e2guardian.conf
# # Change the default report page
        $SED "s?^accessdeniedaddress =.*?accessdeniedaddress = http://$HOSTNAME.$DOMAIN?g" $DIR_DG/e2guardian.conf
# Disable HTML content control
        $SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/e2guardian.conf
        cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
        $SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
# Disable URL control with regex
        cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
        $SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
# Configure E2guardian for large site
# Minimum number of processus to handle connections
        $SED "s?^minchildren =.*?minchildren = 15?g" $DIR_DG/e2guardian.conf
# Maximum number of processus to handle connections
        $SED "s?^maxchildren =.*?maxchildren = 200?g" $DIR_DG/e2guardian.conf
# Run at least 8 daemons
        $SED "s?^minsparechildren =.*?minsparechildren = 8?g" $DIR_DG/e2guardian.conf
# minimum number of processes to spawn
        $SED "s?^preforkchildren =.*?preforkchildren = 10?g" $DIR_DG/e2guardian.conf
# maximum age of a child process before it croaks it
        $SED "s?^maxagechildren =.*?maxagechildren = 1000?g" $DIR_DG/e2guardian.conf
# Disable download files control
        [ -e $DIR_DG/e2guardianf1.conf.default ] || cp $DIR_DG/e2guardianf1.conf $DIR_DG/e2guardianf1.conf.default
        $SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/e2guardianf1.conf
        [ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
        [ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
        touch $DIR_DG/lists/bannedextensionlist
        touch $DIR_DG/lists/bannedmimetypelist
# 'Safesearch' regex actualisation
        $SED "s?images?search?g" $DIR_DG/lists/urlregexplist
# empty LAN IP list that won't be WEB filtered
        [ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
        touch $DIR_DG/lists/exceptioniplist
# Keep a copy of URL & domain filter configuration files
        [ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
        [ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
} # End of e2guardian ()

##################################################################
##                     Function "antivirus"                     ##
## - Set the parameters of havp, libclamav and freshclam        ##
##################################################################
antivirus ()
{
# create 'havp' user
        havp_exist=`grep -c ^havp: /etc/passwd`
        if [ "$havp_exist" == "1" ]
        then
                userdel -r havp 2>/dev/null
                groupdel havp 2>/dev/null
        fi
        groupadd -f havp
        useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
        mkdir -p /var/tmp/havp /var/log/havp /var/run/havp /var/log/clamav /var/lib/clamav
        chown -R havp:havp /var/tmp/havp /var/log/havp /var/run/havp
        chown -R clamav:clamav /var/log/clamav /var/lib/clamav
        [ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
        $SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
        $SED "s?^# PIDFILE.*?PIDFILE /var/run/havp/havp.pid?g" /etc/havp/havp.config    # pidfile
        $SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config             # transparent mode
        $SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config       # we listen only on loopback
        $SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config                            # datas come on port 8090 (on loopback)
        $SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config   # Log format
        $SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config            # active libclamav AV
        $SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config                     # log only when malware matches
        $SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config              # 10 daemons are started simultaneously
        $SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config               # doesn't scan image files
        $SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
# skip checking of youtube flow (too heavy load / risk too low)
        [ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
        echo "# Whitelist youtube flow" >> /etc/havp/whitelist
        echo "*.youtube.com/*" >> /etc/havp/whitelist
# adapt init script and systemd unit
        [ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
        cp -f $DIR_CONF/havp-init /etc/init.d/havp
        [ -e /lib/systemd/system/havp.service.default ] || cp /lib/systemd/system/havp.service /lib/systemd/system/havp.service.default
        $SED "/^PIDFile/i ExecStartPre=/bin/mkdir -p /var/run/havp" /lib/systemd/system/havp.service
        $SED "/^PIDFile/i ExecStartPre=/bin/chown -R havp:havp /var/run/havp /var/log/havp" /lib/systemd/system/havp.service
# replace of the intercept page (template)
        cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
        cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
# update virus database every 4 hours (24h/6)
        [ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
        $SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
        $SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
        $SED "/^DatabaseMirror/i DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
        $SED "/^DatabaseMirror db.fr.clamav.net/i DatabaseMirror switch.clamav.net" /etc/freshclam.conf
        $SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
# update now
        /usr/bin/freshclam --no-warnings
} # End of antivirus ()

################################################################################
##                           Function "tinyproxy"                             ##
## - Set the parameters of tinyproxy (proxy between filterde users and havp)  ##
################################################################################
tinyproxy ()
{
        tinyproxy_exist=`grep -c ^tinyproxy: /etc/passwd`
        if [ "$tinyproxy_exist" == "1" ]
        then
                userdel -r tinyproxy 2>/dev/null
                groupdel tinyproxy 2>/dev/null
        fi
        groupadd -f tinyproxy
        useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
        mkdir -p /var/run/tinyproxy /var/log/tinyproxy
        chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
        [ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
        $SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
        $SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
        $SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf                      # Listen Port
        $SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf          # Listen NIC (only intif)
        $SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
        $SED "s?^#PidFile.*?PidFile \"/var/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
        $SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf             # Only errors are logged
        $SED "s?^#Upstream.*?Upstream 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf   # forward to HAVP
        $SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf      # Stealth mode
        $SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf   # Allow from LAN
# Create the systemd unit
cat << EOF > /lib/systemd/system/tinyproxy.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.

# This unit launches tinyproxy (a very light proxy).
# The "sleep 2" is needed because the pid file isn't ready for systemd
[Unit]
Description=Tinyproxy Web Proxy Server
After=network.target iptables.service

[Service]
Type=forking
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
ExecStartPre=/bin/sleep 2
PIDFile=/var/run/tinyproxy/tinyproxy.pid
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf

[Install]
WantedBy=multi-user.target
EOF

} # end of tinyproxy
##############################################################################
##                            function "ulogd"                              ##
## - Ulog config for multi-log files                                        ##
##############################################################################
ulogd ()
{
# Three instances of ulogd (three different logfiles)
        [ -d /var/log/firewall ] || mkdir -p /var/log/firewall
        nl=1
        for log_type in traceability ssh ext-access
        do
                [ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
                [ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
                cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
                $SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
                cat << EOF >> /etc/ulogd-$log_type.conf
[emu1]
file="/var/log/firewall/$log_type.log"
sync=1
EOF
                $SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
                nl=`expr $nl + 1`
        done
        chown -R root:apache /var/log/firewall
        chmod 750 /var/log/firewall
        chmod 640 /var/log/firewall/*
}  # End of ulogd ()


##########################################################
##                    Function "nfsen"                  ##
## - install the nfsen grapher                          ##
## - install the two plugins porttracker & surfmap      ##
##########################################################
nfsen()
{
        tar xzf ./conf/nfsen/nfsen-*.tar.gz -C /tmp/
# Add PortTracker plugin
        for i in /var/www/html/acc/manager/nfsen/plugins /var/log/netflow/porttracker /usr/share/nfsen/plugins
        do
                [ ! -d $i ] && mkdir -p $i && chown -R apache:apache $i
        done
        $SED "s?^my \$PORTSDBDIR =.*?my \$PORTSDBDIR = \"/var/log/netflow/porttracker\";?g" /tmp/nfsen-*/contrib/PortTracker/PortTracker.pm
# use of our conf file and init unit
        cp $DIR_CONF/nfsen/nfsen.conf /tmp/nfsen-*/etc/
# Installation of nfsen (we change a little 'install.pl in order not to ask the user for the perl version)
        DirTmp=$(pwd)
        cd /tmp/nfsen-*/
        /usr/bin/perl install.pl etc/nfsen.conf
        /usr/bin/perl install.pl etc/nfsen.conf # to avoid a Perl mistake "Semaphore introuvable"
# Create RRD DB for porttracker (only in it still doesn't exist)
        cp contrib/PortTracker/PortTracker.pm /usr/share/nfsen/plugins/
        cp contrib/PortTracker/PortTracker.php /var/www/html/acc/manager/nfsen/plugins/
        if [ "$(ls -A "/var/log/netflow/porttracker" 2>&1)" = "" ]; then sudo -u apache nftrack -I -d /var/log/netflow/porttracker; else echo "RRD DB already exists"; fi
        chmod -R 770 /var/log/netflow/porttracker
# nfsen unit for systemd
        cat << EOF > /lib/systemd/system/nfsen.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.

# This unit launches nfsen (a Netflow grapher).
[Unit]
Description= NfSen init script
After=network.target iptables.service

[Service]
Type=oneshot
RemainAfterExit=yes
PIDFile=/var/run/nfsen/nfsen.pid
ExecStartPre=/bin/mkdir -p /var/run/nfsen
ExecStartPre=/bin/chown apache:apache /var/run/nfsen
ExecStart=/usr/bin/nfsen start
ExecStop=/usr/bin/nfsen stop
ExecReload=/usr/bin/nfsen restart
TimeoutSec=0

[Install]
WantedBy=multi-user.target
EOF
# Add the listen port to collect netflow packet (nfcapd)
        $SED "s?'\$ziparg $extensions.*?\$ziparg $extensions -b 127.0.0.1;'?g" /usr/libexec/NfSenRC.pm
# expire delay for the profile "live"
        /usr/bin/systemctl start nfsen
        /bin/nfsen -m live -e 62d 2>/dev/null
# add SURFmap plugin
        cp $DIR_CONF/nfsen/SURFmap_*.tar.gz /tmp/
        cp $DIR_CONF/nfsen/GeoLiteCity* /tmp/
        tar xzf /tmp/SURFmap_*.tar.gz -C /tmp/
        cd /tmp/
        /usr/bin/sh SURFmap/install.sh
        chown -R apache:apache /var/www/html/acc/manager/nfsen /usr/share/nfsen
# clear the installation
        cd $DirTmp
        rm -rf /tmp/nfsen-*
        rm -rf /tmp/SURFmap*
} # End of nfsen ()

##################################################
##              Function "vnstat"               ##
## Initialization of Vnstat and vnstat phpFE    ##
##################################################
vnstat ()
{
        [ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
        $SED "s?Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
        [ -e $DIR_ACC/manager/stats/config.php.default ] || cp $DIR_ACC/manager/stats/config.php $DIR_ACC/manager/stats/config.php.default
        $SED "s?\$iface_list =.*?\$iface_list = array('$EXTIF');?" $DIR_ACC/manager/stats/config.php
        $SED "s?\$iface_title\['.*?\$iface_title\['$EXTIF'\] = \$title;?" $DIR_ACC/manager/stats/config.php
        /usr/bin/vnstat -u -i $EXTIF
} # End of vnstat

##################################################
##              Function "dnsmasq"              ##
##################################################
dnsmasq ()
{
        [ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
# 1st dnsmasq listen on udp 53 ("dnsmasq - forward"). It's used as dhcp server only if "alcasar-bypass" is on.
        [ -e /etc/dnsmasq.conf.default ] || cp /etc/dnsmasq.conf /etc/dnsmasq.conf.default
        cat << EOF > /etc/dnsmasq.conf
# Configuration file for "dnsmasq in forward mode"
conf-file=$DIR_DEST_ETC/alcasar-dns-name        # local DNS resolutions
listen-address=$PRIVATE_IP
pid-file=/var/run/dnsmasq.pid
listen-address=127.0.0.1
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=2048
domain-needed
expand-hosts
bogus-priv
filterwin2k
server=$DNS1
server=$DNS2
# DHCP service is configured. It will be enabled in "bypass" mode
#dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h
#dhcp-option=option:router,$PRIVATE_IP
#dhcp-option=option:ntp-server,$PRIVATE_IP
#domain=$DOMAIN

# Exemple of static dhcp assignation : <@MAC>,<name>,<@IP>,<MASK>,<ttl bail>
#dhcp-host=11:22:33:44:55:66,ssic-test,192.168.182.20,255.255.255.0,45m
EOF
# 2nd dnsmasq listen on udp 54 ("dnsmasq with blacklist")
        cat << EOF > /etc/dnsmasq-blacklist.conf
# Configuration file for "dnsmasq with blacklist"
# Add Toulouse University blacklist domains
conf-file=$DIR_DEST_ETC/alcasar-dns-name        # local DNS resolutions
conf-dir=$DIR_DEST_SHARE/dnsmasq-bl-enabled
pid-file=/var/run/dnsmasq-blacklist.pid
listen-address=$PRIVATE_IP
port=54
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=2048
domain-needed
expand-hosts
bogus-priv
filterwin2k
log-queries
log-facility=/var/log/dnsmasq/dnsmasq-blacklist.log
server=$DNS1
server=$DNS2
EOF
# 3rd dnsmasq listen on udp 55 ("dnsmasq with whitelist")
        cat << EOF > /etc/dnsmasq-whitelist.conf
# Configuration file for "dnsmasq with whitelist"
# ADD Toulouse university whitelist domains
conf-file=$DIR_DEST_ETC/alcasar-dns-name        # local DNS resolutions
conf-dir=$DIR_DEST_SHARE/dnsmasq-wl-enabled
pid-file=/var/run/dnsmasq-whitelist.pid
listen-address=$PRIVATE_IP
port=55
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=1024
domain-needed
expand-hosts
bogus-priv
filterwin2k
ipset=/#/wl_ip_allowed                  # dynamicly add the resolv IP address in the Firewall rules
address=/#/$PRIVATE_IP                          # for Domain name without local resolution (WL)
EOF
# 4th dnsmasq listen on udp 56 ("blackhole")
        cat << EOF > /etc/dnsmasq-blackhole.conf
# Configuration file for "dnsmasq as a blackhole"
conf-file=$DIR_DEST_ETC/alcasar-dns-name        # local DNS resolutions
address=/#/$PRIVATE_IP                          # redirect all on ALCASAR IP address
pid-file=/var/run/dnsmasq-blackhole.pid
listen-address=$PRIVATE_IP
port=56
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=256
domain-needed
expand-hosts
bogus-priv
filterwin2k
EOF

# the main instance should start after network and chilli (which create tun0)
        [ -e /lib/systemd/system/dnsmasq.service.default ] || cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
        $SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/dnsmasq.service
# Create dnsmasq-blacklist, dnsmasq-whitelist and dnsmasq-blackhole unit
        for list in blacklist whitelist blackhole
        do
                cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq-$list.service
                $SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-$list.conf?g" /lib/systemd/system/dnsmasq-$list.service
                $SED "s?^PIDFile=.*?PIDFile=/var/run/dnsmasq-$list.pid?g" /lib/systemd/system/dnsmasq-$list.service
        done
} # End dnsmasq

##########################################################
##              Fonction "BL"                           ##
##########################################################
BL ()
{
        # copy the Toulouse university BL in order to be adapted to ALCASAR architecture (alcasar-bl.sh -adapt)
        rm -rf $DIR_DG/lists/blacklists
        mkdir -p /tmp/blacklists
        cp $DIR_BLACKLIST/blacklists.tar.gz /tmp/blacklists/
# creation of file for the rehabilited domains and urls
        [ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
        [ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
        touch $DIR_DG/lists/exceptionsitelist
        touch $DIR_DG/lists/exceptionurllist
# On crée la configuration de base du filtrage de domaine et d'URL pour E2guardian
        cat <<EOF > $DIR_DG/lists/bannedurllist
# E2guardian filter config for ALCASAR
EOF
        cat <<EOF > $DIR_DG/lists/bannedsitelist
# E2guardian domain filter config for ALCASAR
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
#**
# block all SSL and CONNECT tunnels
**s
# block all SSL and CONNECT tunnels specified only as an IP
*ips
# block all sites specified only by an IP
*ip
EOF
# Add Bing to the safesearch url regext list (parental control)
        cat <<EOF >> $DIR_DG/lists/urlregexplist
# Bing - add 'adlt=strict'
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
EOF
# change the google safesearch ("safe=strict" instead of "safe=vss")
        $SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
# creation of the custom BL and WL categorie named "ossi" (for domain names & ip only)
        mkdir -p $DIR_DG/lists/blacklists/ossi-bl
        touch $DIR_DG/lists/blacklists/ossi-bl/domains
        echo "ossi-bl" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
        mkdir -p $DIR_DG/lists/blacklists/ossi-wl
        touch $DIR_DG/lists/blacklists/ossi-wl/domains
        echo "ossi-wl" >> $DIR_DEST_ETC/alcasar-wl-categories-enabled
# add custom ALCASAR BL files
        for x in $(ls $DIR_BLACKLIST | grep -v "^blacklist")
        do
                mkdir $DIR_DG/lists/blacklists/ossi-bl-$x
                cp $DIR_BLACKLIST/$x  $DIR_DG/lists/blacklists/ossi-bl-$x/domains
                echo "ossi-bl-$x" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
        done
        chown -R e2guardian:apache $DIR_DG
        chown -R root:apache $DIR_DEST_SHARE
        chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
# adapt the Toulouse BL to ALCASAR architecture
        $DIR_DEST_BIN/alcasar-bl.sh --adapt
# enable the default categories
        $DIR_DEST_BIN/alcasar-bl.sh --cat_choice
} # End BL()

##########################################################
##              Fonction "cron"                         ##
## - Mise en place des différents fichiers de cron     ##
##########################################################
cron ()
{
# Modif du fichier 'crontab' pour passer les cron à minuit au lieu de 04h00
        [ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
        cat <<EOF > /etc/crontab
SHELL=/usr/bin/bash
PATH=/usr/sbin:/usr/bin
MAILTO=root
HOME=/

# run-parts
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
EOF
        [ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
        cat <<EOF >> /etc/anacrontab
7       8       cron.MysqlDump          nice /etc/cron.d/alcasar-mysql
7       10      cron.logExport          nice /etc/cron.d/alcasar-archive
7       20      cron.importClean        nice /etc/cron.d/alcasar-clean_import
EOF

        cat <<EOF > /etc/cron.d/alcasar-mysql
# Contrôle, réparation et export de la base des usagers (tous les lundi à 4h45)
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
# Nettoyage des utilisateurs dont la date d'expiration du compte est supérieure à 7 jours
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
EOF
        cat <<EOF > /etc/cron.d/alcasar-archive
# Archive des logs et de la base de données (tous les lundi à 5h35)
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
EOF
        cat <<EOF > /etc/cron.d/alcasar-ticket-clean
# suppression des fichiers de mots de passe (imports massifs par fichier) et des ticket PDF d'utilisateur
30 * * * *  root $DIR_DEST_BIN/alcasar-ticket-clean.sh
EOF
        cat <<EOF > /etc/cron.d/alcasar-distrib-updates
# mise à jour automatique de la distribution tous les jours 3h30
30 3 * * *  root /usr/sbin/urpmi --auto-update --auto 2>&1
EOF

        cat <<EOF > /etc/cron.d/alcasar-connections-stats
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
# 'alcasar-tot_stats' (everyday at 01h01 pm) : aggregating the daily connections of users (write in the table 'totacct')
# 'alcasar-monthly_tot_stat' (everyday at 01h05 pm) : aggregating the monthly connections of users (write in table 'mtotacct')
# 'alcasar-truncate_raddact' (every month, the first at 01h10 pm) : removing the log sessions of users older than 365 days
# 'alcasar-clean_radacct' (every month, the first at 01h15 pm) : closing the sessions openned for more than 30 days
# 'alcasar-activity_report.sh' (every sunday at 5h35 pm) : generate an activity report in PDF
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
35 5 * * 0 root $DIR_DEST_BIN/alcasar-activity_report.sh > /dev/null 2>&1
EOF
        cat <<EOF > /etc/cron.d/alcasar-watchdog
# run the "watchdog" every 3'
# empty the IPSET of the whitelisted IP (loaded dynamically with dnsmasq-whitelist) when every whitelisted users are logged out (every sunday at 0h05
*/10 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
0 5 * * 0 root $DIR_DEST_BIN/alcasar-flush_ipset_wl.sh > /dev/null 2>&1
#* * * * * root $DIR_DEST_BIN/alcasar-watchdog-hl.sh > /dev/null 2>&1
EOF
# Enabling the watchdog every 18'
        cat <<EOF > /etc/cron.d/alcasar-daemon-watchdog
# activate  the daemon-watchdog after boot process
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
# activate the daemon-watchdog every 18'
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
EOF

# Enabling category update from rsync
        cat <<EOF > /etc/cron.d/alcasar-rsync-bl
# Automatic update of BL via rsync every 12 hours. The categories are listed in the file '/usr/local/etc/update_cat.conf' (no sync if empty).
0 */12 * * * root $DIR_DEST_BIN/alcasar-bl.sh --update_cat > /dev/null 2>&1
EOF

# Renew the Let's Encrypt certificate
        cat <<EOF > /etc/cron.d/alcasar-letsencrypt
# Automatic renew of the Let's Encrypt certificate
@daily root $DIR_DEST_BIN/alcasar-letsencrypt.sh --cron > /dev/null 2>&1
EOF

# removing the users crons
        rm -f /var/spool/cron/*
} # End cron()

##################################################################
##                      Fonction "Fail2Ban"                     ##
##- Modification de la configuration de fail2ban                ##
##- Sécurisation DDOS, SSH-Brute-Force, Intercept.php ...      ##
##################################################################
fail2ban()
{
        /usr/bin/sh $DIR_CONF/fail2ban.sh
# Autorise la lecture seule 2 des 3 fichiers de log concernés, havp est traité dans le script d'init de havp
        [ -e /var/log/fail2ban.log ] || touch /var/log/fail2ban.log
        [ -e /var/Save/security/watchdog.log ] || touch /var/Save/security/watchdog.log
        chmod 644 /var/log/fail2ban.log
        chmod 644 /var/Save/security/watchdog.log
        /usr/bin/touch /var/log/auth.log
# fail2ban unit
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
$SED '/Type=/a\PIDFile=/var/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
$SED '/After=*/c After=syslog.target network.target lighttpd.service' /usr/lib/systemd/system/fail2ban.service
} # End fail2ban()

##################################################################
##                      Fonction "gammu_smsd"                   ##
## - Creation de la base de donnée Gammu                       ##
## - Creation du fichier de config: gammu_smsd_conf             ##
##################################################################
gammu_smsd()
{
# Create 'gammu' databse
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
        $MYSQL="CREATE DATABASE IF NOT EXISTS $DB_GAMMU;GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES"
# Add a gammu database structure
        mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql

# Config file for the daemon
cat << EOF > /etc/gammu_smsd_conf
[gammu]
port = /dev/ttyUSB0
connection = at115200

;########################################################

[smsd]

PIN = 1234

logfile = /var/log/gammu-smsd/gammu-smsd.log
logformat = textall
debuglevel = 0

service = sql
driver = native_mysql
user = $DB_USER
password = $radiuspwd
pc = localhost
database = $DB_GAMMU

RunOnReceive = $DIR_DEST_BIN/alcasar-sms.sh --new_sms

StatusFrequency = 30
;LoopSleep = 2

;ResetFrequency = 300
;HardResetFrequency = 120

CheckSecurity = 1
CheckSignal = 1
CheckBattery = 0
EOF

chmod 755 /etc/gammu_smsd_conf

# Log folder for gammu-smsd
[ -e /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
chmod 755 /var/log/gammu-smsd

# Write radius credentials in the gammu script
$SED "s/^u_db=\".*/u_db=\"$DB_USER\"/g" $DIR_DEST_BIN/alcasar-sms.sh
$SED "s/^p_db=\".*/p_db=\"$radiuspwd\"/g" $DIR_DEST_BIN/alcasar-sms.sh

# Udev rule for Huawei GSM MODEM (idVendor: 12d1) --> run "modeswitch" to switch from "mass_storage" mode to "ttyUSB" (modem) mode
cat << EOF > /lib/udev/rules.d/66-huawei.rules
KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
EOF

} # End gammu_smsd()


##################################################################
##                      Fonction "msec"                         ##
## - Apply the "fileserver" security level                      ##
## - remove the "system request" for rebboting                  ##
## - Fix several file permissions                               ##
##################################################################
msec()
{

# Apply fileserver security level
[ -e /etc/security/msec/security.conf.default ] || cp /etc/security/msec/security.conf /etc/security/msec/security.conf.default
echo "BASE_LEVEL=fileserver" > /etc/security/msec/security.conf

# Set permissions monitoring and enforcement
cat <<EOF > /etc/security/msec/perm.local
/var/log/firefwall/                     root.apache     750
/var/log/firewall/*                     root.apache     640
/etc/security/msec/perm.local           root.root       640
/etc/security/msec/level.local          root.root       640
/etc/freeradius-web                     root.apache     750
/etc/freeradius-web/admin.conf          root.apache     640
/etc/raddb/client.conf                  radius.radius   640
/etc/raddb/radius.conf                  radius.radius   640
/etc/raddb/mods-available/ldap          radius.apache   660
/etc/raddb/sites-available/alcasar      radius.apache   660
/etc/pki/*                              root.apache     750
/var/log/netflow/porttracker            root.apache     770
/var/log/netflow/porttracker/*          root.apache     660
EOF
# apply now hourly & daily checks
/usr/sbin/msec
/etc/cron.weekly/msec

} # End msec()


##################################################################
##                      Fonction "letsencrypt"                  ##
## - Install Let's Encrypt client                               ##
## - Prepare Let's Encrypt ALCASAR configuration file           ##
##################################################################
letsencrypt()
{
        echo "Installing Let's Encrypt client..."

        # Extract acme.sh
        tar xzf ./conf/letsencrypt-client/acme.sh-*.tar.gz -C /tmp/

        pwdInstall=$(pwd)
        cd /tmp/acme.sh-*

        acmesh_installDir="/opt/acme.sh"
        acmesh_confDir="/usr/local/etc/letsencrypt"
        acmesh_userAgent="ALCASAR"

        # Install acme.sh
        ./acme.sh --install \
                --home $acmesh_installDir \
                --config-home $acmesh_confDir/data \
                --certhome $acmesh_confDir/certs \
                --accountkey $acmesh_confDir/ca/account.key \
                --accountconf $acmesh_confDir/data/account.conf \
                --useragent $acmesh_userAgent \
                --nocron \
                > /dev/null

        if [ $? -ne 0 ]; then
                echo "Error during installation of Let's Encrypt client (acme.sh)."
        fi

        # Create configuration file
        cat <<EOF > /usr/local/etc/alcasar-letsencrypt
email=
dateIssueRequest=
domainRequest=
challenge=
dateIssued=
dnsapi=
dateNextRenewal=
EOF

        cd $pwdInstall
        rm -rf /tmp/acme.sh-*

} # END letsencrypt()

##################################################################
##              Fonction "post_install"                 ##
## - Modifying banners (locals et ssh) & prompts        ##
## - SSH config                                         ##
## - sudoers config & files security                    ##
## - log rotate & ANSSI security parameters             ##
## - Apply former conf in case of an update             ##
##########################################################
post_install()
{
# change the SSH banner
        cp -f $DIR_CONF/banner /etc/ssh/alcasar-banner-ssh
        echo " V$VERSION" >> /etc/ssh/alcasar-banner-ssh
        chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
        [ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
        $SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
        $SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
# postfix banner anonymisation
        $SED "s?^smtpd_banner =.*?smtpd_banner = $myhostname ESMTP?g" /etc/postfix/main.cf
        chown -R postfix:postfix /var/lib/postfix
# sshd liste on EXTIF & INTIF
        $SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
# sshd authorized certificate for root login
        $SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
# ALCASAR conf file
        echo "HTTPS_LOGIN=on" >> $CONF_FILE
        echo "HTTPS_CHILLI=off" >> $CONF_FILE
        echo "SSH=on" >> $CONF_FILE
        echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
        echo "LDAP=off" >> $CONF_FILE
        echo "LDAP_SERVER=127.0.0.1" >> $CONF_FILE
        echo "LDAP_BASE=cn=Users;dc=serverad;dc=localdomain" >> $CONF_FILE
        echo "LDAP_UID=sAMAccountName" >> $CONF_FILE
        echo "LDAP_FILTER=" >> $CONF_FILE
        echo "LDAP_USER=alcasar" >> $CONF_FILE
        echo "LDAP_PASSWORD=" >> $CONF_FILE
        echo "MULTIWAN=off" >> $CONF_FILE
        echo "FAILOVER=30" >> $CONF_FILE
        echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
        echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
        echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
# Prompt customisation (colors)
        [ -e /etc/bashrc.default ]  || cp /etc/bashrc /etc/bashrc.default
        cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
        $SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
# sudoers configuration for "apache" & "sysadmin"
        [ -e /etc/sudoers.default ]  || cp /etc/sudoers /etc/sudoers.default
        cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
        $SED "s?^Host_Alias.*?Host_Alias        LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost             #réseau de l'organisme?g" /etc/sudoers
# Modify some logrotate files (gammu, ulogd)
        cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
        chmod 644 /etc/logrotate.d/*
# Log compression
        $SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
# actualisation des fichiers logs compressés
        for dir in firewall e2guardian lighttpd
        do
                find /var/log/$dir -type f -name *.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] -exec gzip {} \;
        done
# create the alcasar-load_balancing unit
        cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.

# This unit lauches alcasar-load-balancing.sh script.
[Unit]
Description=alcasar-load_balancing.sh execution
After=network.target iptables.service

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
TimeoutSec=0
SysVStartPriority=99

[Install]
WantedBy=multi-user.target
EOF
# processes launched at boot time (Systemctl)
        for i in alcasar-load_balancing mysqld lighttpd php-fpm ntpd iptables dnsmasq dnsmasq-blacklist dnsmasq-whitelist dnsmasq-blackhole radiusd nfsen e2guardian freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
        do
                /usr/bin/systemctl -q enable $i.service
        done

# disable processes at boot time (Systemctl)
        for i in ulogd gpm
        do
                /usr/bin/systemctl -q disable $i.service
        done

# Apply French Security Agency (ANSSI) rules
# ignore ICMP broadcast (smurf attack)
        echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
# ignore ICMP errors bogus
        echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
# remove ICMP redirects responces
        echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
        echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
# enable SYN Cookies (Syn flood attacks)
        echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
# enable kernel antispoofing
        echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
# ignore source routing
        echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
# set conntrack timer to 1h (3600s) instead of 5 weeks
        echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
# disable log_martians (ALCASAR is often installed between two private network addresses)
        echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
# disable iptables_helpers
        echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
# Switch to the router mode
        echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
# Remove unused service ipv6
        echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
        echo "net.ipv6.conf.all.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
        echo "net.ipv6.conf.default.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
        echo "net.ipv6.conf.default.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
# switch to multi-users runlevel (instead of x11)
        ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
# GRUB2 modifications (Wait time : 3s - ALCASAR entry - VGA=791 - Change the default banner
        [ -e /etc/default/grub.default ]  || cp /etc/default/grub /etc/default/grub.default
        $SED "s?^GRUB_TIMEOUT=.*?GRUB_TIMEOUT=3?g" /etc/default/grub
        $SED "s?^GRUB_DISTRIBUTOR=.*?GRUB_DISTRIBUTOR=ALCASAR?g" /etc/default/grub
        [ -e /etc/mageia-release.default ]  || cp /etc/mageia-release /etc/mageia-release.default
        vm_vga=`lsmod | egrep -c "virtio|vmwgfx"` # test if in VM
        if [ $vm_vga == 0 ] # is not a VM
        then
                cp -f $DIR_CONF/banner /etc/mageia-release # ALCASAR ASCII-Art
                echo >> /etc/mageia-release
                $SED "s?^GRUB_CMDLINE_LINUX_DEFAULT=\"?&vga=791 ?" /etc/default/grub
        fi
        if [ $Lang == "fr" ]
        then
                echo "Bienvenue sur ALCASAR V$VERSION" >> /etc/mageia-release
                echo "Connectez-vous à l'URL 'https://alcasar.localdomain/acc'" >> /etc/mageia-release
        else
                echo "Welcome on ALCASAR V$VERSION" >> /etc/mageia-release
                echo "Connect to 'https://alcasar.localdomain/acc'" >> /etc/mageia-release
        fi
        /usr/bin/update-grub2
# Load and apply the previous conf file
        if [ "$mode" = "update" ]
        then
                $DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
                $DIR_DEST_BIN/alcasar-conf.sh --load
                PARENT_SCRIPT=`basename $0`
                export PARENT_SCRIPT # to avoid stop&start process during the installation process
                $DIR_DEST_BIN/alcasar-conf.sh --apply
                $DIR_DEST_BIN/alcasar-file-clean.sh # Clean & sort conf files. Add uamallowed domains to the dns-blackhole conf
                $SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
                $SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
        fi
        rm -f /tmp/alcasar-conf*
        chown -R root:apache $DIR_DEST_ETC/*
        chmod -R 660 $DIR_DEST_ETC/*
        chmod ug+x $DIR_DEST_ETC/digest
        cd $DIR_INSTALL
        echo ""
        echo "#############################################################################"
        if [ $Lang == "fr" ]
                then
                echo "#                        Fin d'installation d'ALCASAR                       #"
                echo "#                                                                           #"
                echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
                echo "#                     des Accès au Réseau ( ALCASAR )                       #"
                echo "#                                                                           #"
                echo "#############################################################################"
                echo
                echo "- ALCASAR sera fonctionnel après redémarrage du système"
                echo
                echo "- Lisez attentivement la documentation d'exploitation"
                echo
                echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://alcasar.localdomain"
                echo
                echo "                   Appuyez sur 'Entrée' pour continuer"
        else
                echo "#                        End of ALCASAR install process                     #"
                echo "#                                                                           #"
                echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
                echo "#                     des Accès au Réseau ( ALCASAR )                       #"
                echo "#                                                                           #"
                echo "#############################################################################"
                echo
                echo "- The system will be rebooted in order to operate ALCASAR"
                echo
                echo "- Read the exploitation documentation"
                echo
                echo "- The ALCASAR Control Center (ACC) is at http://alcasar.localdomain"
                echo
                echo "                   Hit 'Enter' to continue"
        fi
        sleep 2
        if [ "$mode" != "update" ]
        then
                read a
        fi
        clear
        reboot
} # End post_install ()

#################################
#       Main Install loop       #
#################################
dir_exec=`dirname "$0"`
if [ $dir_exec != "." ]
then
        echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
        echo "Launch this program from the ALCASAR archive directory"
        exit 0
fi
if [[ $EUID > 0 ]]
then
        echo "Vous devez être "root" pour installer ALCASAR (commande 'su')"
        echo "You must be "root" to install ALCASAR ('su' command)"
        exit 0
fi
VERSION=`cat $DIR_INSTALL/VERSION`
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
        nb_args=1
        args="-h"
fi
chmod -R u+x $DIR_SCRIPTS/*
case $args in
        -\? | -h* | --h*)
                echo "$usage"
                exit 0
                ;;
        -i | --install)
                header_install
                license
                header_install
                testing
# RPMs install
                $DIR_SCRIPTS/alcasar-urpmi.sh
                if [ "$?" != "0" ]
                then
                        exit 0
                fi
                if [ -e $CONF_FILE ]
                then
# Uninstall or update the running version
                        if [ "$mode" == "update" ]
                        then
                                $DIR_SCRIPTS/alcasar-uninstall.sh -update
                        else
                                $DIR_SCRIPTS/alcasar-uninstall.sh -full
                        fi
                fi
        if [ $DEBUG_ALCASAR == "on" ]
        then
                echo "*** 'debug' : end of cleaning ***"
                read a
        fi
# Test if manual update
                if [ -e /tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
                then
                        header_install
                        if [ $Lang == "fr" ]
                                then echo "Le fichier de configuration d'une ancienne version a été trouvé";
                                else echo "The configuration file of an old version has been found";
                        fi
                        response=0
                        PTN='^[oOnNyY]$'
                        until [[ $(expr $response : $PTN) -gt 0 ]]
                        do
                                if [ $Lang == "fr" ]
                                        then echo -n "Voulez-vous l'utiliser (O/n)? ";
                                        else echo -n "Do you want to use it (Y/n)?";
                                 fi
                                read response
                                if [ "$response" = "n" ] || [ "$response" = "N" ]
                                then rm -f /tmp/alcasar-conf*
                                fi
                        done
                fi
# Test if update
                if [ -e /tmp/alcasar-conf* ]
                then
                        if [ $Lang == "fr" ]
                                then echo "#### Installation avec mise à jour ####";
                                else echo "#### Installation with update     ####";
                        fi
# Extract the central configuration file
                        tar -xf /tmp/alcasar-conf* conf/etc/alcasar.conf
                        ORGANISME=`grep ^ORGANISM= conf/etc/alcasar.conf|cut -d"=" -f2`
                        PREVIOUS_VERSION=`grep ^VERSION= conf/etc/alcasar.conf|cut -d"=" -f2`
                        MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
                        MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2|cut -c1`
                        UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3`
                        mode="update"
                fi
                for func in init network ACC CA time_server init_db freeradius chilli e2guardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq BL cron fail2ban gammu_smsd msec letsencrypt post_install
                do
                        $func
                        if [ $DEBUG_ALCASAR == "on" ]
                                then
                                echo "*** 'debug' : end of install '$func' ***"
                                read a
                        fi
                done
                ;;
        -u | --uninstall)
                if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
                then
                        if [ $Lang == "fr" ]
                                then echo "ALCASAR n'est pas installé!";
                                else echo "ALCASAR isn't installed!";
                        fi
                        exit 0
                fi
                response=0
                PTN='^[oOnN]$'
                until [[ $(expr $response : $PTN) -gt 0 ]]
                do
                        if [ $Lang == "fr" ]
                                then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
                                else echo -n "Do you want to create the running version configuration file (Y/n)? ";
                        fi
                        read response
                done
                if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
                then
                        $DIR_SCRIPTS/alcasar-conf.sh --create
                else
                        rm -f /tmp/alcasar-conf*
                fi
# Uninstall the running version
                $DIR_SCRIPTS/alcasar-uninstall.sh -full
                ;;
        *)
                echo "Argument inconnu :$1";
                echo "Unknown argument :$1";
                echo "$usage"
                exit 1
                ;;
esac
# end of script