Subversion Repositories ALCASAR

Rev

Rev 2968 | Rev 2971 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log

#!/bin/bash

# alcasar-rpm.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)

# script de mise en place des dépots RPM
# configure the RPM repository

Lang=`echo $LANG|cut -c 1-2`
VERSION="7"
ARCH="x86_64"
# The kernel version we compile netflow for
KERNEL="kernel-server-5.10.46-1.mga7-1-1.mga7"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
# (old) perl-Socket6 : needed by nfsen
# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf
# "lsscsi" & nvme-cli" : needed by phpsysinfo
# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")
# "sudo" : needed after a reinstallation (to be investigated)
# "clamav + clamav-db" : needed because of a lack of mutual dependance
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat"

rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}

rpm_error ()
{
echo
if [ $Lang == "fr" ]
then
        echo "Relancez l'installation ultérieurement."
        echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"
else
        echo "Try an other install later."
        echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"
fi
}

# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
        if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
        then
                DISTRIBUTION=`echo $i|cut -d"=" -f2`
        fi
        if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
        then
                CURRENT_VERSION=`echo $i|cut -d"=" -f2`
        fi
        if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
        then
                ARCH=`echo $i|cut -d"=" -f2`
        fi
done
IFS="$old"

# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm

# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
MIRROR_NBR=2
#                       For Europeans
MIRRORLIST1="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"
#                       For International install
MIRRORLIST2="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
try_nb="0"; nb_repository="0"
while [ "$nb_repository" != "4" ]
do
        try_nb=`expr $try_nb + 1`
        MIRRORLIST="MIRRORLIST$try_nb"
        rpm_repository_sync
        nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
        if [ "$nb_repository" != "4" ]
        then
                if [ $Lang == "fr" ]
                then
                        echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
                else
                        echo "An error occurs when synchronising the repositories N°$try_nb"
                fi
                if [ $(expr $try_nb) -eq $MIRROR_NBR ]
                then
                        rpm_error
                        exit 1
                fi
                if [ $Lang == "fr" ]
                then
                        echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"
                else
                        echo "Do you want to try a synchronisation with an other repository? (Y/n)"
                fi
                response=0
                PTN='^[oOnNyY]?$'
                until [[ "$response" =~ $PTN ]]
                do
                        read response
                done
                if [ "$response" = "n" ] || [ "$response" = "N" ]
                then
                        exit 1
                fi
        fi
done
# download the kernel used by ALCASAR
if [ $Lang == "fr" ]
then
        echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
        echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
# Remove some of our RPMs in order to avoid their update
urpme wkhtmltopdf
# download updated RPM in cache
if [ $Lang == "fr" ]
then
        echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
        echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
        echo "Updated RPM download. Please wait ..."
        echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
        echo
        if [ $Lang == "fr" ]
        then
                echo "Une erreur a été détectée lors de la récupération des paquetages."
        else
                echo "An error occurs when downloading RPMS"
        fi
        rpm_error
        exit 1
fi

# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
        echo
        if [ $Lang == "fr" ]
        then
                echo "Une erreur a été détectée lors de la mise à jour des paquetages."
        else
                echo "An error occurs when updating packages"
        fi
        rpm_error
        exit 1
fi
# Clean the RPM cache
urpmi --clean

# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then
        echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
        echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
        echo
        if [ $Lang == "fr" ]
        then
                echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
        else
                echo "An error occurs when downloading complementary packages"
        fi
        rpm_error
        exit 1
fi

# update with cached RPM
urpmi --auto --no-recommends $PACKAGES
if [ "$?" != "0" ]
then
        echo
        if [ $Lang == "fr" ]
        then
                echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
        else
                echo "An error occurs when installing complementary packages"
        fi
        rpm_error
        exit 1
fi

# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
        if [ $i != $KERNEL ];then
                urpme --auto $i
        fi
done
# delete unused RPMs
if [ $Lang == "fr" ]
then
        echo "Cleaning the system : "
else
        echo "Nettoyage du système : "
fi
rm_rpm="shorewall mandi plymouth squid"
/usr/sbin/urpme --auto -a $rm_rpm
/usr/sbin/urpme --auto --auto-orphans

# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
for pkg in `ls rpms/$ARCH/*.rpm`
do
    urpmi --no-verify --auto $pkg
done
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)
/sbin/depmod -a 2>/dev/null
# test if all needed rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in $PACKAGES
do
        nb_pkg=`expr $nb_pkg + 1`
        if rpm -q --quiet $pkg ; then
                count_pkg=`expr $count_pkg + 1`
        else
                echo "error installing $pkg"
        fi
done
if [ $count_pkg -ne $nb_pkg ]
then
        exit 1
fi
# test if all custom rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in `ls rpms/$ARCH/|sed 's/.x86_64.rpm//'`
do
        nb_pkg=`expr $nb_pkg + 1`
        if rpm -q --quiet $pkg ; then
                count_pkg=`expr $count_pkg + 1`
        else
                echo "error installing $pkg"
        fi
done
if [ $count_pkg -ne $nb_pkg ]
then
        exit 1
fi
# fix some RPM versions
echo "/^kernel/" > /etc/urpmi/skip.list
echo "/^wkhtmltopdf/" >> /etc/urpmi/skip.list
echo "/^clamd/" >> /etc/urpmi/skip.list
echo "/^clamav/" >> /etc/urpmi/skip.list
echo "exclude=kernel* wkhtmltopdf clamd clamav" >> /etc/dnf/dnf.conf
exit 0