Subversion Repositories ALCASAR

Rev

Rev 1991 | Rev 2006 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log

Rev Author Line No. Line
672 richard 1 
#!/bin/bash
57 franck 2 
#  $Id: alcasar.sh 1992 2016-07-15 16:10:59Z richard $
1 root 3 
 
4 
# alcasar.sh
959 franck 5 
 
1157 stephane 6 
# ALCASAR Install script -  CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]
7 
# Ce programme est un logiciel libre ; This software is free and open source
959 franck 8 
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
9 
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
10 
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
11 
# Voir la Licence Publique Générale GNU pour plus de détails.
12 
 
967 franck 13 
#  team@alcasar.net
959 franck 14 
 
1 root 15 
# by Franck BOUIJOUX, Pascal LEVANT and Richard REY
16 
# This script is distributed under the Gnu General Public License (GPL)
17 
 
672 richard 18 
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
1007 richard 19 
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
1 root 20 
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
1534 richard 21 
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :
22 
# Coovachilli, freeradius, mariaDB, apache, netfilter, dansguardian, ntpd, openssl, dnsmasq, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump
1 root 23 
 
24 
# Options :
376 franck 25 
#       -i or --install
26 
#       -u or --uninstall
1 root 27 
 
376 franck 28 
# Functions :
1378 richard 29 
#	testing			: connectivity tests, free space test and mageia version test
1221 richard 30 
#	init			: Installation of RPM and scripts
31 
#	network			: Network parameters
32 
#	ACC			: ALCASAR Control Center installation
33 
#	CA			: Certification Authority initialization
1837 richard 34 
#	time_server		: NTPd configuration
1221 richard 35 
#	init_db			: Initilization of radius database managed with MariaDB
1389 richard 36 
#	radius			: FreeRadius initialisation
37 
#	chilli			: coovachilli initialisation (+authentication page)
38 
#	dansguardian		: DansGuardian filtering HTTP proxy configuration
1221 richard 39 
#	antivirus		: HAVP + libclamav configuration
1485 richard 40 
#	tinyproxy		: little proxy for user filtered with "WL + antivirus" and "antivirus"
1389 richard 41 
#	ulogd			: log system in userland (match NFLOG target of iptables)
1873 richard 42 
#	nfsen		:	: Configuration of Nfsen Netflow grapher
1253 richard 43 
#	dnsmasq			: Name server configuration
1541 richard 44 
#	vnstat			: little network stat daemon
1873 richard 45 
#	BL			: Adaptation of Toulouse University BlackList : split into 3 BL (for Dnsmasq, for dansguardian and for Netfilter)
1266 richard 46 
#	cron			: Logs export + watchdog + connexion statistics
1389 richard 47 
#	fail2ban		: Fail2ban IDS installation and configuration
48 
#	gammu_smsd		: Autoregister addon via SMS (gammu-smsd)
1266 richard 49 
#	post_install		: Security, log rotation, etc.
1 root 50 
 
51 
DATE=`date '+%d %B %Y - %Hh%M'`
52 
DATE_SHORT=`date '+%d/%m/%Y'`
595 richard 53 
Lang=`echo $LANG|cut -c 1-2`
1362 richard 54 
mode="install"
1 root 55 
# ******* Files parameters - paramètres fichiers *********
1015 richard 56 
DIR_INSTALL=`pwd`				# current directory
57 
DIR_CONF="$DIR_INSTALL/conf"			# install directory (with conf files)
58 
DIR_SCRIPTS="$DIR_INSTALL/scripts"		# install directory (with script files)
1938 richard 59 
DIR_BLACKLIST="$DIR_INSTALL/blacklist"		# install directory (with blacklist files)
1564 richard 60 
DIR_SAVE="/var/Save"				# backup directory (traceability_log, user_db, security_log)
1015 richard 61 
DIR_WEB="/var/www/html"				# directory of APACHE
62 
DIR_DG="/etc/dansguardian"			# directory of DansGuardian
63 
DIR_ACC="$DIR_WEB/acc"				# directory of the 'ALCASAR Control Center'
64 
DIR_DEST_BIN="/usr/local/bin"			# directory of ALCASAR scripts
65 
DIR_DEST_ETC="/usr/local/etc"			# directory of ALCASAR conf files
66 
DIR_DEST_SHARE="/usr/local/share"		# directory of share files used by ALCASAR (dnsmasq for instance)
67 
CONF_FILE="$DIR_DEST_ETC/alcasar.conf"		# central ALCASAR conf file
68 
PASSWD_FILE="/root/ALCASAR-passwords.txt"	# text file with the passwords and shared secrets
1 root 69 
# ******* DBMS parameters - paramètres SGBD ********
1243 richard 70 
DB_RADIUS="radius"				# database name used by FreeRadius server
71 
DB_USER="radius"				# user name allows to request the users database
1349 richard 72 
DB_GAMMU="gammu"				# database name used by Gammu-smsd
1 root 73 
# ******* Network parameters - paramètres réseau *******
1469 richard 74 
HOSTNAME="alcasar"				# default hostname
1243 richard 75 
DOMAIN="localdomain"				# default local domain
1828 richard 76 
EXTIF=`/usr/sbin/ip route|grep default|head -n1|cut -d" " -f5`							# EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
77 
INTIF=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "lo\|$EXTIF\|tun0"|head -n1|cut -d" " -f2|tr -d ":"`	# INTIF is connected to the consultation network
1148 crox53 78 
MTU="1500"
1243 richard 79 
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24"	# Default ALCASAR IP address
1 root 80 
# ****** Paths - chemin des commandes *******
81 
SED="/bin/sed -i"
82 
# ****************** End of global parameters *********************
83 
 
959 franck 84 
license ()
85 
{
86 
	if [ $Lang == "fr" ]
1538 richard 87 
	then
88 
		cat $DIR_INSTALL/gpl-warning.fr.txt | more
89 
	else
90 
		cat $DIR_INSTALL/gpl-warning.txt | more
959 franck 91 
	fi
1538 richard 92 
	response=0
93 
	PTN='^[oOyYnN]$'
94 
	until [[ $(expr $response : $PTN) -gt 0 ]]
95 
	do
96 
		if [ $Lang == "fr" ]
1563 franck 97 
			then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
1538 richard 98 
			else echo -n "Do you accept the terms of this license (Y/n)? : "
99 
		fi
100 
		read response
101 
	done
102 
	if [ "$response" = "n" ] || [ "$response" = "N" ]
103 
	then
104 
		exit 1
105 
	fi
959 franck 106 
}
107 
 
1 root 108 
header_install ()
109 
{
110 
	clear
111 
	echo "-----------------------------------------------------------------------------"
460 richard 112 
	echo "                     ALCASAR V$VERSION Installation"
1 root 113 
	echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
114 
	echo "-----------------------------------------------------------------------------"
1389 richard 115 
}
1 root 116 
 
117 
##################################################################
1221 richard 118 
##			Function "testing"			##
1378 richard 119 
## - Test of Mageia version					##
1529 richard 120 
## - Test of ALCASAR version (if already installed)		##
1342 richard 121 
## - Test of free space on /var  (>10G)				##
1005 richard 122 
## - Test of Internet access					##
29 richard 123 
##################################################################
124 
testing ()
125 
{
1529 richard 126 
# Test of Mageia version
127 
# extract the current Mageia version and hardware architecture (i586 ou X64)
128 
	fic=`cat /etc/product.id`
129 
	unknown_os=0
130 
	old="$IFS"
131 
	IFS=","
132 
	set $fic
133 
	for i in $*
134 
	do
135 
		if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
136 
			then
137 
			DISTRIBUTION=`echo $i|cut -d"=" -f2`
138 
			unknown_os=`expr $unknown_os + 1`
139 
		fi
140 
		if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
141 
			then
142 
			CURRENT_VERSION=`echo $i|cut -d"=" -f2`
143 
			unknown_os=`expr $unknown_os + 1`
144 
		fi
145 
		if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
146 
			then
147 
			ARCH=`echo $i|cut -d"=" -f2`
148 
			unknown_os=`expr $unknown_os + 1`
149 
		fi
150 
	done
151 
	IFS="$old"
1362 richard 152 
# Test if ALCASAR is already installed
153 
	if [ -e $CONF_FILE ]
154 
	then
155 
		current_version=`cat $CONF_FILE | grep VERSION | cut -d"=" -f2`
1342 richard 156 
		if [ $Lang == "fr" ]
1362 richard 157 
			then echo -n "La version "; echo -n $current_version ; echo " d'ALCASAR est déjà installée";
158 
			else echo -n "ALCASAR Version "; echo -n $current_version ; echo " is already installed";
1342 richard 159 
		fi
1362 richard 160 
		response=0
161 
		PTN='^[oOnNyY]$'
162 
		until [[ $(expr $response : $PTN) -gt 0 ]]
163 
		do
164 
			if [ $Lang == "fr" ]
165 
				then echo -n "Voulez-vous effectuer une mise à jour (O/n)? ";
166 
				else echo -n "Do you want to update (Y/n)?";
167 
			 fi
168 
			read response
169 
		done
170 
		if [ "$response" = "n" ] || [ "$response" = "N" ]
171 
		then
172 
			rm -f /tmp/alcasar-conf*
173 
		else
1684 richard 174 
# Retrieve former NICname
175 
			EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2`				# EXTernal InterFace
176 
			INTIF=`grep ^INTIF= $CONF_FILE|cut -d"=" -f2`				# INTernal InterFace
1564 richard 177 
# Create the current conf file
1362 richard 178 
			$DIR_SCRIPTS/alcasar-conf.sh --create
179 
			mode="update"
180 
		fi
1529 richard 181 
	fi
1785 richard 182 
	if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "5" ) ]]
1529 richard 183 
		then
184 
		if [ -e /tmp/alcasar-conf.tar.gz ] # update
1365 richard 185 
			then
1529 richard 186 
			echo
1378 richard 187 
			if [ $Lang == "fr" ]
188 
				then
1529 richard 189 
				echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
1961 richard 190 
				echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"
191 
				echo "2 - Installez Linux-Mageia 5 et ALCASAR (cf. doc d'installation)"
192 
				echo "3 - Importez votre base des usagers"
1378 richard 193 
			else
194 
				echo "The automatic update of ALCASAR can't be performed."
1961 richard 195 
				echo "1 - Save your traceability files and the user database"
196 
				echo "2 - Install Linux-Mageia 5 & ALCASAR (cf. installation doc)"
197 
				echo "3 - Import your users database"
1378 richard 198 
			fi
1529 richard 199 
		else
200 
			if [ $Lang == "fr" ]
201 
				then
202 
				echo "L'installation d'ALCASAR ne peut pas être réalisée."
203 
			else
204 
				echo "The installation of ALCASAR can't be performed."
1378 richard 205 
			fi
206 
		fi
1529 richard 207 
		echo
208 
		if [ $Lang == "fr" ]
209 
			then
1785 richard 210 
			echo "Le système d'exploitation doit être remplacé (Mageia5)"
1529 richard 211 
		else
1785 richard 212 
			echo "The OS must be replaced (Mageia5)"
1529 richard 213 
		fi
214 
		exit 0
1342 richard 215 
	fi
1529 richard 216 
	if [ ! -d /var/log/netflow/porttracker ]
217 
		then
218 
# Test of free space on /var
219 
		free_space=`df -BG --output=avail /var|tail -1|tr -d [:space:]G`
220 
		if [ $free_space -lt 10 ]
221 
			then
222 
			if [ $Lang == "fr" ]
223 
				then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
224 
				else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
225 
			fi
226 
		exit 0
227 
		fi
228 
	fi
1378 richard 229 
	if [ $Lang == "fr" ]
784 richard 230 
		then echo -n "Tests des paramètres réseau : "
595 richard 231 
		else echo -n "Network parameters tests : "
232 
	fi
1471 richard 233 
# Test of Ethernet links state
1828 richard 234 
	DOWN_IF=`/usr/sbin/ip link|grep "NO-CARRIER"|cut -d":" -f2|tr -d " "`
1471 richard 235 
	for i in $DOWN_IF
236 
	do
237 
		if [ $Lang == "fr" ]
238 
		then
239 
			echo "Échec"
240 
			echo "Le lien réseau de la carte $i n'est pas actif."
241 
			echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
242 
		else
243 
			echo "Failed"
244 
			echo "The link state of $i interface is down."
245 
			echo "Make sure that this network card is connected to a switch or an A.P."
246 
		fi
247 
		exit 0
248 
	done
249 
	echo -n "."
250 
 
251 
# Test EXTIF config files
1499 richard 252 
	PUBLIC_IP_MASK=`ip addr show $EXTIF|grep "inet "|cut -d" " -f6`
253 
	PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d"/" -f1`
1686 richard 254 
	PUBLIC_GATEWAY=`ip route list|grep $EXTIF|grep ^default|cut -d" " -f3`
1471 richard 255 
	if [ `echo $PUBLIC_IP|wc -c` -lt 7 ] || [ `echo $PUBLIC_GATEWAY|wc -c` -lt 7 ]
256 
	then
784 richard 257 
		if [ $Lang == "fr" ]
258 
		then
259 
			echo "Échec"
260 
			echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
261 
			echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
1362 richard 262 
			echo "Appliquez les changements : 'systemctl restart network'"
784 richard 263 
		else
264 
			echo "Failed"
265 
			echo "The Internet connected network card ($EXTIF) isn't well configured."
266 
			echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
1362 richard 267 
			echo "Apply the new configuration 'systemctl restart network'"
784 richard 268 
		fi
830 richard 269 
		echo "DEVICE=$EXTIF"
784 richard 270 
		echo "IPADDR="
271 
		echo "NETMASK="
272 
		echo "GATEWAY="
273 
		echo "DNS1="
274 
		echo "DNS2="
830 richard 275 
		echo "ONBOOT=yes"
784 richard 276 
		exit 0
277 
	fi
278 
	echo -n "."
1471 richard 279 
 
280 
# Test if router is alive (Box FAI)
1686 richard 281 
	if [ `ip route list|grep $EXTIF|grep -c ^default` -ne "1" ] ; then
595 richard 282 
		if [ $Lang == "fr" ]
283 
		then
284 
			echo "Échec"
285 
			echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
286 
			echo "Réglez ce problème puis relancez ce script."
287 
		else
288 
			echo "Failed"
289 
			echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
290 
			echo "Resolv this problem, then restart this script."
291 
		fi
29 richard 292 
		exit 0
293 
	fi
308 richard 294 
	echo -n "."
978 franck 295 
# On teste le lien vers le routeur par defaut
1499 richard 296 
	arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
527 richard 297 
	if [ $(expr $arp_reply) -eq 0 ]
308 richard 298 
	       	then
595 richard 299 
		if [ $Lang == "fr" ]
300 
		then
301 
			echo "Échec"
1499 richard 302 
			echo "Le routeur de site ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
595 richard 303 
			echo "Réglez ce problème puis relancez ce script."
304 
		else
305 
			echo "Failed"
306 
			echo "The Internet gateway doesn't answered"
307 
			echo "Resolv this problem, then restart this script."
308 
		fi
308 richard 309 
		exit 0
310 
	fi
311 
	echo -n "."
421 franck 312 
# On teste la connectivité Internet
29 richard 313 
	rm -rf /tmp/con_ok.html
308 richard 314 
	/usr/bin/curl www.google.fr -s -o /tmp/con_ok.html
29 richard 315 
	if [ ! -e /tmp/con_ok.html ]
316 
	then
595 richard 317 
		if [ $Lang == "fr" ]
318 
		then
319 
			echo "La tentative de connexion vers Internet a échoué (google.fr)."
320 
			echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
321 
			echo "Vérifiez la validité des adresses IP des DNS."
322 
		else
323 
			echo "The Internet connection try failed (google.fr)."
324 
			echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
325 
			echo "Verify the DNS IP addresses"
326 
		fi
29 richard 327 
		exit 0
328 
	fi
329 
	rm -rf /tmp/con_ok.html
308 richard 330 
	echo ". : ok"
1389 richard 331 
} # end of testing ()
302 richard 332 
 
333 
##################################################################
1221 richard 334 
##			Function "init"				##
302 richard 335 
## - Création du fichier "/root/ALCASAR_parametres.txt"		##
336 
## - Installation et modification des scripts du portail	##
337 
##################################################################
338 
init ()
339 
{
527 richard 340 
	if [ "$mode" != "update" ]
302 richard 341 
	then
342 
# On affecte le nom d'organisme
597 richard 343 
		header_install
302 richard 344 
		ORGANISME=!
345 
		PTN='^[a-zA-Z0-9-]*$'
580 richard 346 
		until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
302 richard 347 
                do
595 richard 348 
			if [ $Lang == "fr" ]
597 richard 349 
			       	then echo -n "Entrez le nom de votre organisme : "
350 
				else echo -n "Enter the name of your organism : "
595 richard 351 
			fi
330 franck 352 
			read ORGANISME
613 richard 353 
			if [ "$ORGANISME" == "" ]
330 franck 354 
				then
355 
				ORGANISME=!
356 
			fi
357 
		done
302 richard 358 
	fi
1 root 359 
# On crée aléatoirement les mots de passe et les secrets partagés
628 richard 360 
	rm -f $PASSWD_FILE
1350 richard 361 
	grubpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
362 
	echo -n "Password to protect the GRUB boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
628 richard 363 
	echo "$grubpwd" >> $PASSWD_FILE
1348 richard 364 
	md5_grubpwd=`/usr/bin/openssl passwd -1 $grubpwd`
384 richard 365 
	$SED "/^password.*/d" /boot/grub/menu.lst
366 
	$SED "1ipassword --md5 $md5_grubpwd" /boot/grub/menu.lst
1350 richard 367 
	mysqlpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
1003 richard 368 
	echo -n "Name and password of Mysql/mariadb administrator : " >> $PASSWD_FILE
628 richard 369 
	echo "root / $mysqlpwd" >> $PASSWD_FILE
1350 richard 370 
	radiuspwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
1003 richard 371 
	echo -n "Name and password of Mysql/mariadb user : " >> $PASSWD_FILE
628 richard 372 
	echo "$DB_USER / $radiuspwd" >> $PASSWD_FILE
1350 richard 373 
	secretuam=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
628 richard 374 
	echo -n "Shared secret between the script 'intercept.php' and coova-chilli : " >> $PASSWD_FILE
375 
	echo "$secretuam" >> $PASSWD_FILE
1350 richard 376 
	secretradius=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
628 richard 377 
	echo -n "Shared secret between coova-chilli and FreeRadius : " >> $PASSWD_FILE
378 
	echo "$secretradius" >> $PASSWD_FILE
379 
	chmod 640 $PASSWD_FILE
1828 richard 380 
#  copy scripts in in /usr/local/bin
5 franck 381 
	cp -f $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown root:root $DIR_DEST_BIN/alcasar* ; chmod 740 $DIR_DEST_BIN/alcasar*
1828 richard 382 
#  copy conf files in /usr/local/etc
1954 richard 383 
	cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*
1828 richard 384 
	$SED "s?^radiussecret.*?radiussecret=\"$secretradius\"?g" $DIR_DEST_BIN/alcasar-logout.sh
385 
	$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
386 
	$SED "s?^DB_USER=.*?DB_USER=\"$DB_USER\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
387 
	$SED "s?^radiuspwd=.*?radiuspwd=\"$radiuspwd\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
628 richard 388 
# generate central conf file
389 
	cat <<EOF > $CONF_FILE
612 richard 390 
##########################################
391 
##                                      ##
392 
##          ALCASAR Parameters          ##
393 
##                                      ##
394 
##########################################
1 root 395 
 
612 richard 396 
INSTALL_DATE=$DATE
397 
VERSION=$VERSION
398 
ORGANISM=$ORGANISME
1748 richard 399 
HOSTNAME=$HOSTNAME
923 franck 400 
DOMAIN=$DOMAIN
612 richard 401 
EOF
628 richard 402 
	chmod o-rwx $CONF_FILE
1 root 403 
} # End of init ()
404 
 
405 
##################################################################
1221 richard 406 
##			Function "network"			##
1 root 407 
## - Définition du plan d'adressage du réseau de consultation	##
595 richard 408 
## - Nommage DNS du système 					##
1336 richard 409 
## - Configuration de l'interface INTIF (réseau de consultation)##
1 root 410 
## - Modification du fichier /etc/hosts				##
411 
## - Renseignement des fichiers hosts.allow et hosts.deny	##
412 
##################################################################
413 
network ()
414 
{
415 
	header_install
636 richard 416 
	if [ "$mode" != "update" ]
417 
		then
418 
		if [ $Lang == "fr" ]
419 
			then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
420 
			else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
421 
		fi
422 
		response=0
423 
		PTN='^[oOyYnN]$'
424 
		until [[ $(expr $response : $PTN) -gt 0 ]]
1 root 425 
		do
595 richard 426 
			if [ $Lang == "fr" ]
659 richard 427 
				then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
618 richard 428 
				else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
595 richard 429 
			fi
1 root 430 
			read response
431 
		done
636 richard 432 
		if [ "$response" = "n" ] || [ "$response" = "N" ]
433 
		then
434 
			PRIVATE_IP_MASK="0"
435 
			PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
436 
			until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
1 root 437 
			do
595 richard 438 
				if [ $Lang == "fr" ]
597 richard 439 
					then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
440 
					else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
595 richard 441 
				fi
597 richard 442 
				read PRIVATE_IP_MASK
1 root 443 
			done
636 richard 444 
		else
445 
       			PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
446 
		fi
595 richard 447 
	else
637 richard 448 
		PRIVATE_IP_MASK=`grep PRIVATE_IP conf/etc/alcasar.conf|cut -d"=" -f2`
449 
		rm -rf conf/etc/alcasar.conf
1 root 450 
	fi
861 richard 451 
# Define LAN side global parameters
1740 richard 452 
	hostnamectl set-hostname $HOSTNAME.$DOMAIN
977 richard 453 
	PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network address (ie.: 192.168.182.0)
1499 richard 454 
	private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4`					# last octet of LAN address
977 richard 455 
	PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2`				# private network mask (ie.: 255.255.255.0)
1499 richard 456 
	PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2`					# network prefix (ie. 24)
977 richard 457 
	PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1`						# ALCASAR private ip address (consultation LAN side)
1499 richard 458 
	if [ $PRIVATE_IP == $PRIVATE_NETWORK ]								# when entering network address instead of ip address
459 
		then
460 
		PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`
461 
		PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
462 
	fi
463 
	private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4`						# last octet of LAN address
464 
	PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1`		# second network address (ex.: 192.168.182.2)
977 richard 465 
	PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX						# ie.: 192.168.182.0/24
1499 richard 466 
	classe=$((PRIVATE_PREFIX/8))									# ie.: 2=classe B, 3=classe C
977 richard 467 
	PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`.				# compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
468 
	PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2`			# private network broadcast (ie.: 192.168.182.255)
1499 richard 469 
	private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f4`				# last octet of LAN broadcast
470 
	PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`	# First network address (ex.: 192.168.182.1)
837 richard 471 
	PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1`	# last network address (ex.: 192.168.182.254)
1828 richard 472 
	PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'` 	# MAC address of INTIF
841 richard 473 
# Define Internet parameters
1613 franck 474 
	DNS1=`grep ^nameserver /etc/resolv.conf|awk -F" " '{print $2}'|head -n 1`				# 1st DNS server
1499 richard 475 
	nb_dns=`grep ^nameserver /etc/resolv.conf|wc -l`
476 
	if [ $nb_dns == 2 ]
477 
		then
478 
		DNS2=`grep ^nameserver /etc/resolv.conf|cut -d" " -f2|tail -n 1`			# 2nd DNS server (if exist)
479 
	fi
70 franck 480 
	DNS1=${DNS1:=208.67.220.220}
481 
	DNS2=${DNS2:=208.67.222.222}
1499 richard 482 
	PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
1052 richard 483 
	PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
1069 richard 484 
	PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
1499 richard 485 
# Wrtie the conf file
1469 richard 486 
	echo "EXTIF=$EXTIF" >> $CONF_FILE
487 
	echo "INTIF=$INTIF" >> $CONF_FILE
1499 richard 488 
	IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2`		# IP setting (static or dynamic)
489 
	if [ $IP_SETTING == "dhcp" ]
490 
		then
491 
		echo "PUBLIC_IP=dhcp" >> $CONF_FILE
1585 richard 492 
		echo "GW=dhcp" >> $CONF_FILE
1499 richard 493 
	else
494 
		echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
1585 richard 495 
		echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
1499 richard 496 
	fi
1587 richard 497 
	echo "DNS1=$DNS1" >> $CONF_FILE
498 
	echo "DNS2=$DNS2" >> $CONF_FILE
994 franck 499 
	echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
628 richard 500 
	echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
1484 richard 501 
	echo "DHCP=on" >> $CONF_FILE
914 franck 502 
	echo "EXT_DHCP_IP=none" >> $CONF_FILE
503 
	echo "RELAY_DHCP_IP=none" >> $CONF_FILE
504 
	echo "RELAY_DHCP_PORT=none" >> $CONF_FILE
1488 richard 505 
	echo "PROTOCOLS_FILTERING=off" >> $CONF_FILE
1610 franck 506 
	echo "INT_DNS_DOMAIN=none" >> $CONF_FILE
507 
	echo "INT_DNS_IP=none" >> $CONF_FILE
508 
	echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
1499 richard 509 
# network default
597 richard 510 
	[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
1 root 511 
	cat <<EOF > /etc/sysconfig/network
512 
NETWORKING=yes
513 
FORWARD_IPV4=true
514 
EOF
1499 richard 515 
# /etc/hosts config
1 root 516 
	[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
517 
	cat <<EOF > /etc/hosts
503 richard 518 
127.0.0.1	localhost
1736 richard 519 
$PRIVATE_IP	$HOSTNAME.$DOMAIN $HOSTNAME
1 root 520 
EOF
1499 richard 521 
# EXTIF (Internet) config
522 
	[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
523 
	if [ $IP_SETTING == "dhcp" ]
524 
		then
525 
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
14 richard 526 
DEVICE=$EXTIF
1585 richard 527 
BOOTPROTO=dhcp
528 
DNS1=127.0.0.1
529 
PEERDNS=no
530 
RESOLV_MODS=yes
531 
ONBOOT=yes
1613 franck 532 
NOZEROCONF=yes
1585 richard 533 
METRIC=10
534 
MII_NOT_SUPPORTED=yes
535 
IPV6INIT=no
536 
IPV6TO4INIT=no
537 
ACCOUNTING=no
538 
USERCTL=no
539 
MTU=$MTU
540 
EOF
541 
		else
542 
		cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
543 
DEVICE=$EXTIF
14 richard 544 
BOOTPROTO=static
597 richard 545 
IPADDR=$PUBLIC_IP
546 
NETMASK=$PUBLIC_NETMASK
547 
GATEWAY=$PUBLIC_GATEWAY
14 richard 548 
DNS1=127.0.0.1
1499 richard 549 
RESOLV_MODS=yes
14 richard 550 
ONBOOT=yes
551 
METRIC=10
1610 franck 552 
NOZEROCONF=yes
14 richard 553 
MII_NOT_SUPPORTED=yes
554 
IPV6INIT=no
555 
IPV6TO4INIT=no
556 
ACCOUNTING=no
557 
USERCTL=no
994 franck 558 
MTU=$MTU
14 richard 559 
EOF
1499 richard 560 
	fi
1336 richard 561 
# Config INTIF (consultation LAN) in normal mode
841 richard 562 
	cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
563 
DEVICE=$INTIF
564 
BOOTPROTO=static
565 
ONBOOT=yes
566 
NOZEROCONF=yes
567 
MII_NOT_SUPPORTED=yes
568 
IPV6INIT=no
569 
IPV6TO4INIT=no
570 
ACCOUNTING=no
571 
USERCTL=no
572 
EOF
1558 richard 573 
	cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
1336 richard 574 
# Config of INTIF in bypass mode (see "alcasar-bypass.sh")
1554 richard 575 
	cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
1 root 576 
DEVICE=$INTIF
577 
BOOTPROTO=static
578 
IPADDR=$PRIVATE_IP
604 richard 579 
NETMASK=$PRIVATE_NETMASK
1 root 580 
ONBOOT=yes
581 
METRIC=10
582 
NOZEROCONF=yes
583 
MII_NOT_SUPPORTED=yes
14 richard 584 
IPV6INIT=no
585 
IPV6TO4INIT=no
586 
ACCOUNTING=no
587 
USERCTL=no
1 root 588 
EOF
589 
# Renseignement des fichiers hosts.allow et hosts.deny
590 
	[ -e /etc/hosts.allow.default ]  || cp /etc/hosts.allow /etc/hosts.allow.default
591 
	cat <<EOF > /etc/hosts.allow
592 
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
604 richard 593 
sshd: ALL
1 root 594 
ntpd: $PRIVATE_NETWORK_SHORT
595 
EOF
596 
	[ -e /etc/host.deny.default ]  || cp /etc/hosts.deny /etc/hosts.deny.default
597 
	cat <<EOF > /etc/hosts.deny
598 
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
599 
EOF
790 richard 600 
	chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
860 richard 601 
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
1069 richard 602 
	echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
790 richard 603 
# load conntrack ftp module
604 
	[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
1705 richard 605 
	echo "nf_conntrack_ftp" >>  /etc/modprobe.preload
1159 crox53 606 
# load ipt_NETFLOW module
607 
	echo "ipt_NETFLOW" >>  /etc/modprobe.preload
1513 richard 608 
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
609 
[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
610 
$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
611 
[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
1833 richard 612 
$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
1157 stephane 613 
#
860 richard 614 
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
1 root 615 
} # End of network ()
616 
 
617 
##################################################################
1221 richard 618 
##			Function "ACC"				##
1898 richard 619 
## - installation of then ALCASAR Control Center (ACC)	)	##
620 
## - configuration of the web server (Apache)			##
621 
## - creation of the first ACC admin account 			##
622 
## - secure the access						##
1 root 623 
##################################################################
1221 richard 624 
ACC ()
1 root 625 
{
626 
	[ -d $DIR_WEB ] && rm -rf $DIR_WEB
627 
	mkdir $DIR_WEB
1833 richard 628 
# Copy & adapt ACC files
316 richard 629 
	cp -rf $DIR_INSTALL/web/* $DIR_WEB/
972 richard 630 
	echo "$VERSION" > $DIR_WEB/VERSION
316 richard 631 
	$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
632 
	$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
633 
	$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
634 
	$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
635 
	chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
5 franck 636 
	chown -R apache:apache $DIR_WEB/*
1833 richard 637 
# copy & adapt "freeradius-web" files
638 
	cp -rf $DIR_CONF/freeradius-web/ /etc/
639 
	[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
640 
	$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
641 
	$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
642 
	$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
643 
	cat <<EOF > /etc/freeradius-web/naslist.conf
644 
nas1_name: alcasar-$ORGANISME
645 
nas1_model: Network Access Controler
646 
nas1_ip: $PRIVATE_IP
647 
nas1_port_num: 0
648 
nas1_community: public
649 
EOF
650 
	chown -R apache:apache /etc/freeradius-web/
651 
# create the log & backup structure :
1489 richard 652 
# - base = users database
653 
# - archive = tarball of "base + http firewall + netflow"
1833 richard 654 
# - security = watchdog log
1564 richard 655 
	for i in base archive security;
1 root 656 
	do
657 
		[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
658 
	done
5 franck 659 
	chown -R root:apache $DIR_SAVE
1833 richard 660 
# Configuring & securing php
71 richard 661 
	[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
534 richard 662 
	timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
663 
	$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
411 richard 664 
	$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
665 
	$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
71 richard 666 
	$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
667 
	$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
1833 richard 668 
# Configuring & sécuring Apache
790 richard 669 
	rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
1 root 670 
	[ -e /etc/httpd/conf/httpd.conf.default ] || cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.default
1243 richard 671 
	$SED "s?^#ServerName.*?ServerName $HOSTNAME.$DOMAIN?g" /etc/httpd/conf/httpd.conf
303 richard 672 
	$SED "s?^Listen.*?Listen $PRIVATE_IP:80?g" /etc/httpd/conf/httpd.conf
1532 richard 673 
	$SED "s?Options Indexes.*?Options -Indexes?g" /etc/httpd/conf/httpd.conf
674 
	echo "ServerTokens Prod" >> /etc/httpd/conf/httpd.conf
675 
	echo "ServerSignature Off" >> /etc/httpd/conf/httpd.conf
676 
	[ -e /etc/httpd/conf/modules.d/00_base.conf.default ] || cp /etc/httpd/conf/modules.d/00_base.conf /etc/httpd/conf/modules.d/00_base.conf.default
677 
	$SED "s?^LoadModule authn_anon_module.*?#LoadModule authn_anon_module modules/mod_authn_anon.so?g" /etc/httpd/conf/modules.d/00_base.conf
678 
	$SED "s?^LoadModule status_module.*?#LoadModule status_module modules/mod_status.so?g" /etc/httpd/conf/modules.d/00_base.conf
679 
	$SED "s?^LoadModule info_module.*?#LoadModule info_module modules/mod_info.so?g" /etc/httpd/conf/modules.d/00_base.conf
680 
	$SED "s?^LoadModule imagemap_module.*?#LoadModule imagemap_module modules/mod_imagemap.so?g" /etc/httpd/conf/modules.d/00_base.conf
681 
	$SED "s?^LoadModule rewrite_module.*?#LoadModule rewrite_module modules/mod_rewrite.so?g" /etc/httpd/conf/modules.d/00_base.conf
682 
	$SED "s?^LoadModule speling_module.*?#LoadModule speling_module modules/mod_speling.so?g" /etc/httpd/conf/modules.d/00_base.conf
1359 richard 683 
	[ -e /etc/httpd/conf/conf.d/ssl.conf.default ] || cp /etc/httpd/conf/conf.d/ssl.conf /etc/httpd/conf/conf.d/ssl.conf.default
1702 richard 684 
	echo "Listen $PRIVATE_IP:443" > /etc/httpd/conf/conf.d/ssl.conf # Listen only on INTIF
685 
	echo "SSLProtocol all -SSLv2 -SSLv3" >> /etc/httpd/conf/conf.d/ssl.conf  # exclude vulnerable protocols
686 
	echo "SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS" >> /etc/httpd/conf/conf.d/ssl.conf # Define the cipher suite
687 
	echo "SSLHonorCipherOrder on" >> /etc/httpd/conf/conf.d/ssl.conf # The Browser must respect the order of the cipher suite
688 
	echo "SSLPassPhraseDialog  builtin" >> /etc/httpd/conf/conf.d/ssl.conf # in case of passphrase the dialog will be perform on stdin
689 
	echo "SSLSessionCache \"shmcb:/run/httpd/ssl_scache(512000)\"" >> /etc/httpd/conf/conf.d/ssl.conf # default cache size
690 
	echo "SSLSessionCacheTimeout 300" >> /etc/httpd/conf/conf.d/ssl.conf # default cache time in seconds
1532 richard 691 
# Error page management
1534 richard 692 
[ -e /etc/httpd/conf/conf.d/multilang-errordoc.conf.default ] || cp /etc/httpd/conf/conf.d/multilang-errordoc.conf /etc/httpd/conf/conf.d/multilang-errordoc.conf.default
693 
cat <<EOF > /etc/httpd/conf/conf.d/multilang-errordoc.conf
1532 richard 694 
Alias /error/ "/var/www/html/"
695 
<Directory "/usr/share/httpd/error">
696 
    AllowOverride None
697 
    Options IncludesNoExec
698 
    AddOutputFilter Includes html
699 
    AddHandler type-map var
700 
    Require all granted
701 
    LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
702 
    ForceLanguagePriority Prefer Fallback
703 
</Directory>
704 
ErrorDocument 400 /error/error.php?error=400
705 
ErrorDocument 401 /error/error.php?error=401
706 
ErrorDocument 403 /error/error.php?error=403
1992 richard 707 
ErrorDocument 404 /error/index.php
1532 richard 708 
ErrorDocument 405 /error/error.php?error=405
709 
ErrorDocument 408 /error/error.php?error=408
710 
ErrorDocument 410 /error/error.php?error=410
711 
ErrorDocument 411 /error/error.php?error=411
712 
ErrorDocument 412 /error/error.php?error=412
713 
ErrorDocument 413 /error/error.php?error=413
714 
ErrorDocument 414 /error/error.php?error=414
715 
ErrorDocument 415 /error/error.php?error=415
716 
ErrorDocument 500 /error/error.php?error=500
717 
ErrorDocument 501 /error/error.php?error=501
718 
ErrorDocument 502 /error/error.php?error=502
719 
ErrorDocument 503 /error/error.php?error=503
720 
ErrorDocument 506 /error/error.php?error=506
721 
EOF
1359 richard 722 
	[ -e /usr/share/httpd/error/include/top.html.default ] || cp /usr/share/httpd/error/include/top.html /usr/share/httpd/error/include/top.html.default
723 
	$SED "s?background-color.*?background-color: #EFEFEF; }?g" /usr/share/httpd/error/include/top.html
724 
	[ -e /usr/share/httpd/error/include/bottom.html.default ] || cp /usr/share/httpd/error/include/bottom.html /usr/share/httpd/error/include/bottom.html.default
725 
	cat <<EOF > /usr/share/httpd/error/include/bottom.html
1 root 726 
</body>
727 
</html>
728 
EOF
729 
# Définition du premier compte lié au profil 'admin'
1833 richard 730 
if [ "$mode" = "install" ]
731 
	then
1676 richard 732 
		header_install
613 richard 733 
		admin_portal=!
734 
		PTN='^[a-zA-Z0-9-]*$'
735 
		until [[ $(expr $admin_portal : $PTN) -gt 0 ]]
736 
                	do
737 
			header_install
738 
			if [ $Lang == "fr" ]
739 
			then
740 
				echo ""
741 
				echo "Définissez un premier compte d'administration du portail :"
742 
				echo
743 
				echo -n "Nom : "
744 
			else
745 
				echo ""
746 
				echo "Define the first account allow to administrate the portal :"
747 
				echo
748 
				echo -n "Account : "
749 
			fi
750 
			read admin_portal
751 
			if [ "$admin_portal" == "" ]
752 
				then
753 
				admin_portal=!
754 
			fi
755 
			done
1268 richard 756 
# Creation of keys file for the admin account ("admin")
510 richard 757 
		[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
758 
		mkdir -p $DIR_DEST_ETC/digest
759 
		chmod 755 $DIR_DEST_ETC/digest
760 
		until [ -s $DIR_DEST_ETC/digest/key_admin ]
761 
			do
1748 richard 762 
				/usr/bin/htdigest -c $DIR_DEST_ETC/digest/key_admin "ALCASAR Control Center (ACC)" $admin_portal
510 richard 763 
			done
1828 richard 764 
		$DIR_DEST_BIN/alcasar-profil.sh --list
1833 richard 765 
fi
766 
# ACC partitioning
988 franck 767 
	rm -f /etc/httpd/conf/webapps.d/alcasar*
1 root 768 
	cat <<EOF > /etc/httpd/conf/webapps.d/alcasar.conf
316 richard 769 
<Directory $DIR_ACC>
1 root 770 
	SSLRequireSSL
771 
	AllowOverride None
772 
	Order deny,allow
773 
	Deny from all
774 
	Allow from 127.0.0.1
775 
	Allow from $PRIVATE_NETWORK_MASK
776 
	require valid-user
777 
	AuthType digest
1748 richard 778 
	AuthName "ALCASAR Control Center (ACC)"
1747 richard 779 
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 780 
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 781 
	AuthUserFile $DIR_DEST_ETC/digest/key_all
1243 richard 782 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 783 
</Directory>
316 richard 784 
<Directory $DIR_ACC/admin>
1 root 785 
	SSLRequireSSL
786 
	AllowOverride None
787 
	Order deny,allow
788 
	Deny from all
789 
	Allow from 127.0.0.1
790 
	Allow from $PRIVATE_NETWORK_MASK
791 
	require valid-user
792 
	AuthType digest
1748 richard 793 
	AuthName "ALCASAR Control Center (ACC)"
1747 richard 794 
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 795 
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 796 
	AuthUserFile $DIR_DEST_ETC/digest/key_admin
1243 richard 797 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 798 
</Directory>
344 richard 799 
<Directory $DIR_ACC/manager>
1 root 800 
	SSLRequireSSL
801 
	AllowOverride None
802 
	Order deny,allow
803 
	Deny from all
804 
	Allow from 127.0.0.1
805 
	Allow from $PRIVATE_NETWORK_MASK
806 
	require valid-user
807 
	AuthType digest
1748 richard 808 
	AuthName "ALCASAR Control Center (ACC)"
1747 richard 809 
	AuthDigestDomain $HOSTNAME.$DOMAIN
1 root 810 
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 811 
	AuthUserFile $DIR_DEST_ETC/digest/key_manager
1243 richard 812 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
1 root 813 
</Directory>
316 richard 814 
<Directory $DIR_ACC/backup>
815 
	SSLRequireSSL
816 
	AllowOverride None
817 
	Order deny,allow
818 
	Deny from all
819 
	Allow from 127.0.0.1
820 
	Allow from $PRIVATE_NETWORK_MASK
821 
	require valid-user
822 
	AuthType digest
1748 richard 823 
	AuthName "ALCASAR Control Center (ACC)"
1747 richard 824 
	AuthDigestDomain $HOSTNAME.$DOMAIN
316 richard 825 
	BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
434 richard 826 
	AuthUserFile $DIR_DEST_ETC/digest/key_backup
1243 richard 827 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
316 richard 828 
</Directory>
811 richard 829 
Alias /save/ "$DIR_SAVE/"
830 
<Directory $DIR_SAVE>
831 
	SSLRequireSSL
832 
	Options Indexes
833 
	Order deny,allow
834 
	Deny from all
835 
	Allow from 127.0.0.1
836 
	Allow from $PRIVATE_NETWORK_MASK
837 
	require valid-user
838 
	AuthType digest
1748 richard 839 
	AuthName "ALCASAR Control Center (ACC)"
1747 richard 840 
	AuthDigestDomain $HOSTNAME.$DOMAIN
811 richard 841 
	AuthUserFile $DIR_DEST_ETC/digest/key_backup
1243 richard 842 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
811 richard 843 
</Directory>
1833 richard 844 
<Directory $DIR_WEB/pass>
845 
	SSLRequireSSL
846 
	AllowOverride None
847 
	Order deny,allow
848 
	Deny from all
849 
	Allow from 127.0.0.1
850 
	Allow from $PRIVATE_NETWORK_MASK
851 
	ErrorDocument 404 https://$HOSTNAME.$DOMAIN
852 
</Directory>
1 root 853 
EOF
1833 richard 854 
# Launch after coova (in order to wait tun0 to be up)
1378 richard 855 
$SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/httpd.service
1389 richard 856 
} # End of ACC ()
1 root 857 
 
1893 richard 858 
##########################################################################
859 
##				Fonction "CA"				##
1898 richard 860 
## - Creating the CA and the server certificate (apache)	 	##
1893 richard 861 
##########################################################################
1221 richard 862 
CA ()
1 root 863 
{
510 richard 864 
	$DIR_DEST_BIN/alcasar-CA.sh
800 richard 865 
	FIC_VIRTUAL_SSL=`find /etc/httpd/conf -type f -name *default_ssl_vhost.conf`
303 richard 866 
	[ -e /etc/httpd/conf/vhosts-ssl.default ]  || cp $FIC_VIRTUAL_SSL /etc/httpd/conf/vhosts-ssl.default
1410 richard 867 
	cat <<EOF > $FIC_VIRTUAL_SSL
868 
# default SSL virtual host, used for all HTTPS requests that do not
869 
# match a ServerName or ServerAlias in any <VirtualHost> block.
870 
 
871 
<VirtualHost _default_:443>
872 
# general configuration
873 
    ServerAdmin root@localhost
1748 richard 874 
    ServerName $HOSTNAME.$DOMAIN
1410 richard 875 
 
876 
# SSL configuration
877 
    SSLEngine on
878 
    SSLCertificateFile /etc/pki/tls/certs/alcasar.crt
879 
    SSLCertificateKeyFile /etc/pki/tls/private/alcasar.key
880 
    SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
881 
    CustomLog logs/ssl_request_log \
882 
	"%t %{SSL_PROTOCOL}x %{SSL_CIPHER}x [%h] \"%r\" %b"
883 
    ErrorLog logs/ssl_error_log
884 
    ErrorLogFormat "[%t] [%m:%l] [client %a] %M"
885 
</VirtualHost>
886 
EOF
5 franck 887 
	chown -R root:apache /etc/pki
1 root 888 
	chmod -R 750 /etc/pki
1389 richard 889 
} # End of CA ()
1 root 890 
 
1837 richard 891 
##################################################################
892 
##			Function "time_server"			##
893 
## - Configuring NTP server					##
894 
##################################################################
895 
time_server ()
896 
{
897 
# Set the Internet time server
898 
	[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
899 
	cat <<EOF > /etc/ntp/step-tickers
900 
0.fr.pool.ntp.org	# adapt to your country
901 
1.fr.pool.ntp.org
902 
2.fr.pool.ntp.org
903 
EOF
904 
	[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
905 
	cat <<EOF > /etc/ntp.conf
906 
server 0.fr.pool.ntp.org	# adapt to your country
907 
server 1.fr.pool.ntp.org
908 
server 2.fr.pool.ntp.org
909 
server 127.127.1.0   		# local clock si NTP internet indisponible ...
910 
fudge 127.127.1.0 stratum 10
911 
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
912 
restrict 127.0.0.1
913 
driftfile /var/lib/ntp/drift
914 
logfile /var/log/ntp.log
915 
disable monitor
916 
EOF
917 
	chown -R ntp:ntp /var/lib/ntp
918 
# Synchronize now
919 
	ntpd -q -g &
920 
} # End of time_server ()
921 
 
1 root 922 
##########################################################################################
1221 richard 923 
##			Fonction "init_db"						##
1 root 924 
## - Initialisation de la base Mysql							##
925 
## - Affectation du mot de passe de l'administrateur (root)				##
926 
## - Suppression des bases et des utilisateurs superflus				##
927 
## - Création de la base 'radius'							##
928 
## - Installation du schéma de cette base						##
929 
## - Import des tables de comptabilité (mtotacct, totacct) et info_usagers (userinfo)	##
930 
##       ces table proviennent de 'dialupadmin' (paquetage freeradius-web)		##
931 
##########################################################################################
932 
init_db ()
933 
{
1990 richard 934 
	if [ `systemctl is-active mysqld` == "active" ]
935 
	then
936 
		systemctl stop mysqld
937 
	fi
1355 richard 938 
	rm -rf /var/lib/mysql # to be sure that there is no former installation
1991 richard 939 
	/usr/sbin/mysqld-prepare-db-dir > /dev/null 2>&1
1 root 940 
	[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
1355 richard 941 
	$SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
1979 richard 942 
	$SED "s?^port.*?#&?g" /etc/my.cnf # we use unix socket only
1980 richard 943 
	$SED "s?^;collation_server =.*?collation_server = utf8_unicode_ci?g" /etc/my.cnf
944 
	$SED "s?^;character_set_server =.*?character_set_server = utf8?g" /etc/my.cnf  # accentuated user names are allowed
945 
	$SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/feedback.cnf # remove the feedback plugin (ALCASAR doesn't report anything !)
1574 richard 946 
	/usr/bin/systemctl start mysqld.service
1963 richard 947 
	nb_round=1
1981 richard 948 
	while [ ! -S /var/lib/mysql/mysql.sock ] && [ $nb_round -lt 10 ] # we wait until mariadb is on
1963 richard 949 
	do
950 
		nb_round=`expr $nb_round + 1`
951 
		sleep 2
952 
	done
1981 richard 953 
	if [ ! -S /var/lib/mysql/mysql.sock ]
1963 richard 954 
	then
1981 richard 955 
		echo "Problème : la base données 'MariaDB' ne s'est pas lancée !"
1963 richard 956 
		exit
1955 richard 957 
	fi
1 root 958 
	mysqladmin -u root password $mysqlpwd
959 
	MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
1355 richard 960 
# Secure the server
961 
	$MYSQL="DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
962 
	$MYSQL="CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;"
615 richard 963 
# Create 'radius' database
1317 richard 964 
	$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
615 richard 965 
# Add an empty radius database structure
1800 richard 966 
	mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
615 richard 967 
# modify the start script in order to close accounting connexion when the system is comming down or up
1357 richard 968 
	[ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
1828 richard 969 
	$SED "/ExecStartPost=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
970 
	$SED "/ExecStartPost=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
1574 richard 971 
	/usr/bin/systemctl daemon-reload
1389 richard 972 
} # End of init_db ()
1 root 973 
 
974 
##########################################################################
1389 richard 975 
##			Fonction "radius"				##
1 root 976 
## - Paramètrage des fichiers de configuration FreeRadius		##
977 
## - Affectation du secret partagé entre coova-chilli et freeradius	##
978 
## - Modification de fichier de conf pour l'accès à Mysql		##
979 
##########################################################################
1389 richard 980 
radius ()
1 root 981 
{
1800 richard 982 
	cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
1 root 983 
	chown -R radius:radius /etc/raddb
984 
	[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
1278 richard 985 
# Set radius.conf parameters
1 root 986 
	$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
987 
	$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
988 
	$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
1278 richard 989 
# remove the proxy function
1 root 990 
	$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf
991 
	$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf
1278 richard 992 
# remove EAP module
654 richard 993 
	$SED "s?^[\t ]*\$INCLUDE eap.conf.*?#\$INCLUDE eap.conf?g" /etc/raddb/radiusd.conf
1278 richard 994 
# listen on loopback (should be modified later if EAP enabled)
1 root 995 
	$SED "s?^[\t ]*ipaddr =.*?ipaddr = 127.0.0.1?g" /etc/raddb/radiusd.conf
1278 richard 996 
# enable the  SQL module (and SQL counter)
1 root 997 
	$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql.conf.*?\$INCLUDE sql.conf?g" /etc/raddb/radiusd.conf
998 
	$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql/mysql/counter.conf?\$INCLUDE sql/mysql/counter.conf?g" /etc/raddb/radiusd.conf
999 
	$SED "s?^[\t ]*\$INCLUDE policy.conf?#\$INCLUDE policy.conf?g" /etc/raddb/radiusd.conf
1465 richard 1000 
# only include modules for ALCASAR needs
1001 
	$SED "s?^[\t ]*\$INCLUDE \${confdir}/modules/.*?\t#\$INCLUDE \${confdir}/modules/\n\t# we only include modules for ALCASAR needs\n\t\$INCLUDE \${confdir}/modules/attr_filter\n\t\$INCLUDE \${confdir}/modules/expiration\n\t\$INCLUDE \${confdir}/modules/logintime\n\t\$INCLUDE \${confdir}/modules/ldap\n\t\$INCLUDE \${confdir}/modules/pap?g" /etc/raddb/radiusd.conf
1002 
	$SED "s/^[\t ]exec$/\#\texec/g" /etc/raddb/radiusd.conf
1003 
	$SED "s?^[\t ]*expr.*?\#\texpr?g" /etc/raddb/radiusd.conf
1004 
	$SED "s?^[\t ]*\#	daily.*?\#\tdaily\n\tsql?g" /etc/raddb/radiusd.conf
1005 
	$SED "s?^[\t ]*logintime.*?\tlogintime\n\tnoresetcounter\n\tdailycounter\n\tmonthlycounter\n\tattr_filter.access_reject\n\tattr_filter.accounting_response\n\tpap?g" /etc/raddb/radiusd.conf
1006 
	$SED "s?^[\t ]*\$INCLUDE sites-enabled/.*?\#\$INCLUDE sites-enabled/\n\#\tenable only alcasar virtual server\n\$INCLUDE sites-enabled/alcasar?g" /etc/raddb/radiusd.conf
1278 richard 1007 
# remvove virtual server and copy our conf file
1 root 1008 
	rm -f /etc/raddb/sites-enabled/*
1278 richard 1009 
       	cp $DIR_CONF/radius/alcasar-radius /etc/raddb/sites-available/alcasar
1 root 1010 
	chown radius:apache /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap # droits rw pour apache (module ldap)
1011 
	chmod 660 /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap
1012 
	chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/modules
1013 
	ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
384 richard 1014 
# Inutile dans notre fonctionnement mais les liens sont recréés par un update de radius ... donc forcé en tant que fichier à 'vide'
1 root 1015 
	touch /etc/raddb/sites-enabled/{inner-tunnel,control-socket,default}
1278 richard 1016 
# client.conf configuration (127.0.0.1 suffit mais on laisse le deuxième client pour la future gestion de l'EAP)
1 root 1017 
	[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
1018 
	cat << EOF > /etc/raddb/clients.conf
1019 
client 127.0.0.1 {
1020 
	secret = $secretradius
1021 
	shortname = localhost
1022 
}
1023 
EOF
1278 richard 1024 
# sql.conf modification
1 root 1025 
	[ -e /etc/raddb/sql.conf.default ] || cp /etc/raddb/sql.conf /etc/raddb/sql.conf.default
1026 
	$SED "s?^[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/sql.conf
1027 
	$SED "s?^[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/sql.conf
1028 
	$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/sql.conf
1029 
	$SED "s?^[\t ]*sqltrace =.*?sqltrace = no?g" /etc/raddb/sql.conf
1278 richard 1030 
# dialup.conf modification (case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.)
1 root 1031 
	[ -e /etc/raddb/sql/mysql/dialup.conf.default ] || cp /etc/raddb/sql/mysql/dialup.conf /etc/raddb/sql/mysql/dialup.conf.default
1278 richard 1032 
	cp -f $DIR_CONF/radius/dialup.conf /etc/raddb/sql/mysql/dialup.conf
1033 
# counter.conf modification (change the Max-All-Session-Time counter)
1034 
	[ -e /etc/raddb/sql/mysql/counter.conf.default ] || cp /etc/raddb/sql/mysql/counter.conf /etc/raddb/sql/mysql/counter.conf.default
1035 
	cp -f $DIR_CONF/radius/counter.conf /etc/raddb/sql/mysql/counter.conf
1036 
	chown -R radius:radius /etc/raddb/sql/mysql/*
1358 richard 1037 
# make certain that mysql is up before radius start
1038 
	[ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
1039 
	$SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
1574 richard 1040 
	/usr/bin/systemctl daemon-reload
1389 richard 1041 
} # End radius ()
1 root 1042 
 
799 richard 1043 
##################################################################################
1389 richard 1044 
##			Fonction "chilli"					##
799 richard 1045 
## - Création du fichier d'initialisation et de configuration de coova-chilli	##
1046 
## - Paramètrage de la page d'authentification (intercept.php)			##
1047 
##################################################################################
1389 richard 1048 
chilli ()
1 root 1049 
{
1370 richard 1050 
# chilli unit for systemd
1051 
cat << EOF > /lib/systemd/system/chilli.service
1372 richard 1052 
#  This file is part of systemd.
1053 
#
1054 
#  systemd is free software; you can redistribute it and/or modify it
1055 
#  under the terms of the GNU General Public License as published by
1056 
#  the Free Software Foundation; either version 2 of the License, or
1057 
#  (at your option) any later version.
1370 richard 1058 
[Unit]
1059 
Description=chilli is a captive portal daemon
1060 
After=network.target
1061 
 
1062 
[Service]
1379 richard 1063 
Type=forking
1370 richard 1064 
ExecStart=/usr/libexec/chilli start
1065 
ExecStop=/usr/libexec/chilli stop
1066 
ExecReload=/usr/libexec/chilli reload
1067 
PIDFile=/var/run/chilli.pid
1068 
 
1069 
[Install]
1070 
WantedBy=multi-user.target
1071 
EOF
799 richard 1072 
# init file creation
1370 richard 1073 
	[ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
1801 richard 1074 
	cat <<EOF > /etc/init.d/chilli
799 richard 1075 
#!/bin/sh
1076 
#
1077 
# chilli CoovaChilli init
1078 
#
1079 
# chkconfig: 2345 65 35
1080 
# description: CoovaChilli
1081 
### BEGIN INIT INFO
1082 
# Provides:       chilli
1083 
# Required-Start: network
1084 
# Should-Start:
1085 
# Required-Stop:  network
1086 
# Should-Stop:
1087 
# Default-Start:  2 3 5
1088 
# Default-Stop:
1089 
# Description:    CoovaChilli access controller
1090 
### END INIT INFO
1091 
 
1092 
[ -f /usr/sbin/chilli ] || exit 0
1093 
. /etc/init.d/functions
1094 
CONFIG=/etc/chilli.conf
1095 
pidfile=/var/run/chilli.pid
1096 
[ -f \$CONFIG ] || {
1097 
    echo "\$CONFIG Not found"
1098 
    exit 0
1099 
}
1100 
RETVAL=0
1101 
prog="chilli"
1102 
case \$1 in
1103 
    start)
1104 
	if [ -f \$pidfile ] ; then
1105 
		gprintf "chilli is already running"
1106 
	else
1107 
        	gprintf "Starting \$prog: "
1108 
		rm -f /var/run/chilli* # cleaning
1828 richard 1109 
        	/usr/sbin/modprobe tun >/dev/null 2>&1
799 richard 1110 
        	echo 1 > /proc/sys/net/ipv4/ip_forward
1111 
		[ -e /dev/net/tun ] || {
1112 
	    	(cd /dev;
1113 
			mkdir net;
1114 
			cd net;
1115 
			mknod tun c 10 200)
1116 
		}
1336 richard 1117 
		ifconfig $INTIF 0.0.0.0
1576 richard 1118 
		/usr/sbin/ethtool -K $INTIF gro off
799 richard 1119 
		daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
1120 
        	RETVAL=$?
1121 
	fi
1122 
	;;
1123 
 
1124 
    reload)
1125 
	killall -HUP chilli
1126 
	;;
1127 
 
1128 
    restart)
1129 
	\$0 stop
1130 
        sleep 2
1131 
	\$0 start
1132 
	;;
1133 
 
1134 
    status)
1135 
        status chilli
1136 
        RETVAL=0
1137 
        ;;
1138 
 
1139 
    stop)
1140 
	if [ -f \$pidfile ] ; then
1141 
        	gprintf "Shutting down \$prog: "
1142 
		killproc /usr/sbin/chilli
1143 
		RETVAL=\$?
1144 
		[ \$RETVAL = 0 ] && rm -f $pidfile
1145 
	else
1146 
        	gprintf "chilli is not running"
1147 
	fi
1148 
	;;
1149 
 
1150 
    *)
1151 
        echo "Usage: \$0 {start|stop|restart|reload|status}"
1152 
        exit 1
1153 
esac
1154 
echo
1155 
EOF
1801 richard 1156 
chmod a+x /etc/init.d/chilli
1157 
ln -s /etc/init.d/chilli /usr/libexec/chilli
799 richard 1158 
# conf file creation
346 richard 1159 
	[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
1160 
	cat <<EOF > /etc/chilli.conf
1161 
# coova config for ALCASAR
1162 
cmdsocket	/var/run/chilli.sock
1336 richard 1163 
unixipc		chilli.$INTIF.ipc
1551 richard 1164 
pidfile		/var/run/chilli.pid
346 richard 1165 
net		$PRIVATE_NETWORK_MASK
595 richard 1166 
dhcpif		$INTIF
841 richard 1167 
ethers		$DIR_DEST_ETC/alcasar-ethers
861 richard 1168 
#nodynip
865 richard 1169 
#statip
1170 
dynip		$PRIVATE_NETWORK_MASK
1249 richard 1171 
domain		$DOMAIN
355 richard 1172 
dns1		$PRIVATE_IP
1173 
dns2		$PRIVATE_IP
346 richard 1174 
uamlisten	$PRIVATE_IP
503 richard 1175 
uamport		3990
837 richard 1176 
macauth
1177 
macpasswd	password
1697 richard 1178 
strictmacauth
1243 richard 1179 
locationname	$HOSTNAME.$DOMAIN
346 richard 1180 
radiusserver1	127.0.0.1
1181 
radiusserver2	127.0.0.1
1182 
radiussecret	$secretradius
1183 
radiusauthport	1812
1184 
radiusacctport	1813
1243 richard 1185 
uamserver	https://$HOSTNAME.$DOMAIN/intercept.php
1186 
radiusnasid	$HOSTNAME.$DOMAIN
346 richard 1187 
uamsecret	$secretuam
1249 richard 1188 
uamallowed	$HOSTNAME,$HOSTNAME.$DOMAIN
346 richard 1189 
coaport		3799
1379 richard 1190 
conup		$DIR_DEST_BIN/alcasar-conup.sh
1191 
condown		$DIR_DEST_BIN/alcasar-condown.sh
503 richard 1192 
include		$DIR_DEST_ETC/alcasar-uamallowed
1193 
include		$DIR_DEST_ETC/alcasar-uamdomain
1613 franck 1194 
#dhcpgateway		none
1195 
#dhcprelayagent		none
1610 franck 1196 
#dhcpgatewayport	none
346 richard 1197 
EOF
1336 richard 1198 
# create file for DHCP static ip. Reserve the second IP address for INTIF (the first one is for tun0)
977 richard 1199 
	echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
840 richard 1200 
# create files for trusted domains and urls
1148 crox53 1201 
	touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
503 richard 1202 
	chown root:apache $DIR_DEST_ETC/alcasar-*
1203 
	chmod 660 $DIR_DEST_ETC/alcasar-*
847 richard 1204 
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
526 stephane 1205 
	$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
1206 
	$SED "s?^\$userpassword=1.*?\$userpassword=1;?g" $DIR_WEB/intercept.php
796 richard 1207 
# user 'chilli' creation (in order to run conup/off and up/down scripts
1208 
	chilli_exist=`grep chilli /etc/passwd|wc -l`
1209 
	if [ "$chilli_exist" == "1" ]
1210 
	then
1211 
	      userdel -r chilli 2>/dev/null
1212 
	fi
1213 
	groupadd -f chilli
1214 
	useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
1389 richard 1215 
}  # End of chilli ()
1349 richard 1216 
 
1 root 1217 
##################################################################
1389 richard 1218 
##		Fonction "dansguardian"				##
1 root 1219 
## - Paramètrage du gestionnaire de contenu Dansguardian	##
1220 
##################################################################
1389 richard 1221 
dansguardian ()
1 root 1222 
{
1841 richard 1223 
	mkdir -p /var/dansguardian /var/log/dansguardian
1224 
	chown -R dansguardian /var/dansguardian /var/log/dansguardian
1375 richard 1225 
	$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dansguardian -c /etc/dansguardian/dansguardian.conf?g" /lib/systemd/system/dansguardian.service
1391 richard 1226 
	$SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/dansguardian.service
497 richard 1227 
	[ -e $DIR_DG/dansguardian.conf.default ] || cp $DIR_DG/dansguardian.conf $DIR_DG/dansguardian.conf.default
1293 richard 1228 
# By default the filter is off
1556 richard 1229 
	$SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/dansguardian.conf
1293 richard 1230 
# French deny HTML page
497 richard 1231 
	$SED "s?^language =.*?language = french?g" $DIR_DG/dansguardian.conf
1293 richard 1232 
# Listen only on LAN side
497 richard 1233 
	$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/dansguardian.conf
1342 richard 1234 
# DG send its flow to HAVP
1235 
	$SED "s?^proxyport.*?proxyport = 8090?g" $DIR_DG/dansguardian.conf
1293 richard 1236 
# replace the default deny HTML page
1 root 1237 
	cp -f $DIR_CONF/template.html /usr/share/dansguardian/languages/ukenglish/
1238 
	cp -f $DIR_CONF/template-fr.html /usr/share/dansguardian/languages/french/template.html
1293 richard 1239 
# Don't log
1240 
	$SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/dansguardian.conf
1 root 1241 
# on désactive par défaut le controle de contenu des pages html
497 richard 1242 
	$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/dansguardian.conf
1243 
	cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
1244 
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
1 root 1245 
# on désactive par défaut le contrôle d'URL par expressions régulières
497 richard 1246 
	cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
1247 
	$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
1721 richard 1248 
 
1249 
# Configure Dansguardian for large site
1250 
# Minimum number of processus to handle connections
1251 
	$SED "s?^minchildren =.*?minchildren = 15?g" $DIR_DG/dansguardian.conf
1252 
# Maximum number of processus to handle connections
1253 
	$SED "s?^maxchildren =.*?maxchildren = 200?g" $DIR_DG/dansguardian.conf
1254 
# Run at least 8 daemons
1255 
	$SED "s?^minsparechildren =.*?minsparechildren = 8?g" $DIR_DG/dansguardian.conf
1256 
# minimum number of processes to spawn
1257 
	$SED "s?^preforkchildren =.*?preforkchildren = 10?g" $DIR_DG/dansguardian.conf
1258 
# maximum age of a child process before it croaks it
1259 
	$SED "s?^maxagechildren =.*?maxagechildren = 1000?g" $DIR_DG/dansguardian.conf
1260 
 
1 root 1261 
# on désactive par défaut le contrôle de téléchargement de fichiers
497 richard 1262 
	[ -e $DIR_DG/dansguardianf1.conf.default ] || cp $DIR_DG/dansguardianf1.conf $DIR_DG/dansguardianf1.conf.default
1263 
	$SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/dansguardianf1.conf
1264 
	[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
1265 
	[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
1266 
	touch $DIR_DG/lists/bannedextensionlist
1267 
	touch $DIR_DG/lists/bannedmimetypelist
1268 
# 'Safesearch' regex actualisation
498 richard 1269 
	$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
497 richard 1270 
# empty LAN IP list that won't be WEB filtered
1271 
	[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
1272 
	touch $DIR_DG/lists/exceptioniplist
1273 
# Keep a copy of URL & domain filter configuration files
1274 
	[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
1275 
	[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
1389 richard 1276 
} # End of dansguardian ()
1 root 1277 
 
71 richard 1278 
##################################################################
1221 richard 1279 
##			Fonction "antivirus"			##
1357 richard 1280 
## - configuration of havp, libclamav and freshclam		##
71 richard 1281 
##################################################################
1282 
antivirus ()
1283 
{
1358 richard 1284 
# create 'havp' user
288 richard 1285 
	havp_exist=`grep havp /etc/passwd|wc -l`
307 richard 1286 
	if [ "$havp_exist" == "1" ]
288 richard 1287 
	then
478 richard 1288 
	      userdel -r havp 2>/dev/null
894 richard 1289 
	      groupdel havp 2>/dev/null
288 richard 1290 
	fi
307 richard 1291 
	groupadd -f havp
1486 richard 1292 
	useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
1841 richard 1293 
	mkdir -p /var/tmp/havp /var/log/havp /var/run/havp /var/log/clamav /var/lib/clamav
1484 richard 1294 
	chown -R havp:havp /var/tmp/havp /var/log/havp /var/run/havp
1841 richard 1295 
	chown -R clamav:clamav /var/log/clamav /var/lib/clamav
109 richard 1296 
	[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
1297 
	$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
1484 richard 1298 
	$SED "s?^# PIDFILE.*?PIDFILE /var/run/havp/havp.pid?g" /etc/havp/havp.config	# pidfile
1299 
	$SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config		# transparent mode
631 richard 1300 
	$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config	# we listen only on loopback
1485 richard 1301 
	$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config				# datas come on port 8090 (on loopback)
990 franck 1302 
	$SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config	# Log format
631 richard 1303 
	$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config		# active libclamav AV
1304 
	$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config			# log only when malware matches
659 richard 1305 
	$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config		# 10 daemons are started simultaneously
835 richard 1306 
	$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config		# doesn't scan image files
1307 
	$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
1007 richard 1308 
# skip checking of youtube flow (too heavy load / risk too low)
1309 
	[ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
1310 
	echo "# Whitelist youtube flow" >> /etc/havp/whitelist
1311 
	echo "*.youtube.com/*" >> /etc/havp/whitelist
1544 richard 1312 
# adapt init script and systemd unit
335 richard 1313 
	[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
481 franck 1314 
	cp -f $DIR_CONF/havp-init /etc/init.d/havp
1547 richard 1315 
	[ -e /lib/systemd/system/havp.service.default ] || cp /lib/systemd/system/havp.service /lib/systemd/system/havp.service.default
1316 
	$SED "/^PIDFile/i ExecStartPre=/bin/mkdir -p /var/run/havp" /lib/systemd/system/havp.service
1544 richard 1317 
	$SED "/^PIDFile/i ExecStartPre=/bin/chown -R havp:havp /var/run/havp /var/log/havp" /lib/systemd/system/havp.service
1358 richard 1318 
# replace of the intercept page (template)
340 richard 1319 
	cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
1320 
	cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
1358 richard 1321 
# update virus database every 4 hours (24h/6)
1357 richard 1322 
	[ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
1323 
	$SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
489 richard 1324 
	$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
1357 richard 1325 
	$SED "/^DatabaseMirror/i DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
1358 richard 1326 
	$SED "/^DatabaseMirror db.fr.clamav.net/i DatabaseMirror switch.clamav.net" /etc/freshclam.conf
1327 
	$SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
1385 richard 1328 
# update now
1382 richard 1329 
	/usr/bin/freshclam --no-warnings
1389 richard 1330 
} # End of antivirus ()
71 richard 1331 
 
1486 richard 1332 
##########################################################################
1333 
##			Fonction "tinyproxy"				##
1334 
## - configuration of tinyproxy (proxy between filterde users and havp)	##
1335 
##########################################################################
1485 richard 1336 
tinyproxy ()
1337 
{
1486 richard 1338 
	tinyproxy_exist=`grep tinyproxy /etc/passwd|wc -l`
1339 
	if [ "$tinyproxy_exist" == "1" ]
1340 
	then
1341 
	      userdel -r tinyproxy 2>/dev/null
1342 
	      groupdel tinyproxy 2>/dev/null
1343 
	fi
1344 
	groupadd -f tinyproxy
1488 richard 1345 
	useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
1668 richard 1346 
	mkdir -p /var/run/tinyproxy /var/log/tinyproxy
1347 
	chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
1486 richard 1348 
	[ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
1349 
	$SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
1350 
	$SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
1351 
	$SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf			# Listen Port
1352 
	$SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf		# Listen NIC (only intif)
1508 richard 1353 
	$SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
1518 richard 1354 
	$SED "s?^#PidFile.*?PidFile \"/var/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
1486 richard 1355 
	$SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf		# Only errors are logged
1356 
	$SED "s?^#Upstream.*?Upstream 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf	# forward to HAVP
1357 
	$SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf	# Stealth mode
1544 richard 1358 
	$SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf	# Allow from LAN
1509 richard 1359 
# Create the systemd unit
1360 
cat << EOF > /lib/systemd/system/tinyproxy.service
1361 
#  This file is part of systemd.
1362 
#
1363 
#  systemd is free software; you can redistribute it and/or modify it
1364 
#  under the terms of the GNU General Public License as published by
1365 
#  the Free Software Foundation; either version 2 of the License, or
1366 
#  (at your option) any later version.
1485 richard 1367 
 
1509 richard 1368 
# This unit launches tinyproxy (a very light proxy).
1518 richard 1369 
# The "sleep 2" is needed because the pid file isn't ready for systemd
1509 richard 1370 
[Unit]
1371 
Description=Tinyproxy Web Proxy Server
1372 
After=network.target iptables.service
1373 
 
1374 
[Service]
1375 
Type=forking
1518 richard 1376 
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
1377 
ExecStartPre=/bin/sleep 2
1378 
PIDFile=/var/run/tinyproxy/tinyproxy.pid
1509 richard 1379 
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf
1380 
 
1381 
[Install]
1382 
WantedBy=multi-user.target
1383 
EOF
1384 
 
1485 richard 1385 
} # end of tinyproxy
1 root 1386 
##################################################################################
1389 richard 1387 
##			function "ulogd"					##
476 richard 1388 
## - Ulog config for multi-log files 						##
1389 
##################################################################################
1389 richard 1390 
ulogd ()
476 richard 1391 
{
1392 
# Three instances of ulogd (three different logfiles)
1393 
	[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
478 richard 1394 
	nl=1
1358 richard 1395 
	for log_type in traceability ssh ext-access
478 richard 1396 
	do
1365 richard 1397 
		[ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
1369 richard 1398 
		[ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
1375 richard 1399 
		cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
1704 richard 1400 
		$SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
1554 richard 1401 
		if [ "$ARCH" == "i586" ]; then $SED "s/lib64/lib/g" /etc/ulogd-$log_type.conf; fi
478 richard 1402 
		cat << EOF >> /etc/ulogd-$log_type.conf
1452 richard 1403 
[emu1]
478 richard 1404 
file="/var/log/firewall/$log_type.log"
1405 
sync=1
1406 
EOF
1452 richard 1407 
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
478 richard 1408 
		nl=`expr $nl + 1`
1409 
	done
476 richard 1410 
	chown -R root:apache /var/log/firewall
1411 
	chmod 750 /var/log/firewall
1412 
	chmod 640 /var/log/firewall/*
1389 richard 1413 
}  # End of ulogd ()
476 richard 1414 
 
1159 crox53 1415 
 
1416 
##########################################################
1389 richard 1417 
##              Function "nfsen"			##
1567 richard 1418 
## - install the nfsen grapher				##
1419 
## - install the two plugins porttracker & surfmap	##
1159 crox53 1420 
##########################################################
1389 richard 1421 
nfsen()
1 root 1422 
{
1569 richard 1423 
	tar xzf ./conf/nfsen/nfsen-1.3.7.tar.gz -C /tmp/
1365 richard 1424 
# Add PortTracker plugin
1534 richard 1425 
	for i in /var/www/html/acc/manager/nfsen/plugins /var/log/netflow/porttracker /usr/share/nfsen/plugins
1395 richard 1426 
	do
1536 richard 1427 
	[ ! -d $i ] && mkdir -p $i && chown -R apache:apache $i
1395 richard 1428 
	done
1569 richard 1429 
	$SED "s?^my \$PORTSDBDIR =.*?my \$PORTSDBDIR = \"/var/log/netflow/porttracker\";?g" /tmp/nfsen-1.3.7/contrib/PortTracker/PortTracker.pm
1365 richard 1430 
# use of our conf file and init unit
1569 richard 1431 
	cp $DIR_CONF/nfsen/nfsen.conf /tmp/nfsen-1.3.7/etc/
1570 richard 1432 
# Installation of nfsen (we change a little 'install.pl in order not to ask the user for the perl version)
1221 richard 1433 
	DirTmp=$(pwd)
1569 richard 1434 
	cd /tmp/nfsen-1.3.7/
1570 richard 1435 
	/usr/bin/perl install.pl etc/nfsen.conf
1436 
	/usr/bin/perl install.pl etc/nfsen.conf # to avoid a Perl mistake "Semaphore introuvable"
1365 richard 1437 
# Create RRD DB for porttracker (only in it still doesn't exist)
1570 richard 1438 
	cp contrib/PortTracker/PortTracker.pm /usr/share/nfsen/plugins/
1439 
	cp contrib/PortTracker/PortTracker.php /var/www/html/acc/manager/nfsen/plugins/
1395 richard 1440 
	if [ "$(ls -A "/var/log/netflow/porttracker" 2>&1)" = "" ]; then sudo -u apache nftrack -I -d /var/log/netflow/porttracker; else echo "RRD DB already exists"; fi
1441 
	chmod -R 770 /var/log/netflow/porttracker
1372 richard 1442 
# nfsen unit for systemd
1443 
cat << EOF > /lib/systemd/system/nfsen.service
1444 
#  This file is part of systemd.
1445 
#
1446 
#  systemd is free software; you can redistribute it and/or modify it
1447 
#  under the terms of the GNU General Public License as published by
1448 
#  the Free Software Foundation; either version 2 of the License, or
1449 
#  (at your option) any later version.
1450 
 
1451 
# This unit launches nfsen (a Netflow grapher).
1452 
[Unit]
1453 
Description= NfSen init script
1454 
After=network.target iptables.service
1455 
 
1456 
[Service]
1457 
Type=oneshot
1458 
RemainAfterExit=yes
1393 richard 1459 
PIDFile=/var/run/nfsen/nfsen.pid
1460 
ExecStartPre=/bin/mkdir -p /var/run/nfsen
1461 
ExecStartPre=/bin/chown apache:apache /var/run/nfsen
1372 richard 1462 
ExecStart=/usr/bin/nfsen start
1463 
ExecStop=/usr/bin/nfsen stop
1393 richard 1464 
ExecReload=/usr/bin/nfsen restart
1372 richard 1465 
TimeoutSec=0
1466 
 
1467 
[Install]
1468 
WantedBy=multi-user.target
1469 
EOF
1365 richard 1470 
# Add the listen port to collect netflow packet (nfcapd)
1393 richard 1471 
$SED "s?'\$ziparg $extensions.*?\$ziparg $extensions -b 127.0.0.1;'?g" /usr/libexec/NfSenRC.pm
1365 richard 1472 
# expire delay for the profile "live"
1574 richard 1473 
	/usr/bin/systemctl start nfsen
1393 richard 1474 
	/bin/nfsen -m live -e 62d 2>/dev/null
1397 richard 1475 
# add SURFmap plugin
1509 richard 1476 
	cp $DIR_CONF/nfsen/SURFmap_v3.3.1.tar.gz /tmp/
1512 richard 1477 
	cp $DIR_CONF/nfsen/GeoLiteCity* /tmp/
1509 richard 1478 
	tar xzf /tmp/SURFmap_v3.3.1.tar.gz -C /tmp/
1512 richard 1479 
	cd /tmp/
1480 
	/usr/bin/sh SURFmap/install.sh
1544 richard 1481 
chown -R apache:apache /var/www/html/acc/manager/nfsen /usr/share/nfsen
1365 richard 1482 
# clear the installation
1221 richard 1483 
	cd $DirTmp
1509 richard 1484 
	rm -rf /tmp/nfsen*
1485 
	rm -rf /tmp/SURFmap*
1389 richard 1486 
} # End of nfsen ()
1 root 1487 
 
1390 richard 1488 
##################################################
1541 richard 1489 
##		Function "vnstat"		##
1490 
## Initialization of Vnstat and vnstat phpFE    ##
1491 
##################################################
1492 
vnstat ()
1493 
{
1494 
	 [ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
1495 
	 $SED "s?Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
1496 
	 [ -e $DIR_ACC/manager/stats/config.php.default ] || cp $DIR_ACC/manager/stats/config.php $DIR_ACC/manager/stats/config.php.default
1497 
	 $SED "s?\$iface_list =.*?\$iface_list = array('$EXTIF');?g" $DIR_ACC/manager/stats/config.php
1498 
	/usr/bin/vnstat -u -i $EXTIF
1499 
} # End of vnstat
1500 
##################################################
1389 richard 1501 
##		Function "dnsmasq"		##
1390 richard 1502 
##################################################
1389 richard 1503 
dnsmasq ()
219 jeremy 1504 
{
1505 
	[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
1356 richard 1506 
	[ -e /etc/sysconfig/dnsmasq.default ] || cp /etc/sysconfig/dnsmasq /etc/sysconfig/dnsmasq.default
1976 franck 1507 
#	$SED "s?^OPTION=.*?OPTION=-C /etc/dnsmasq.conf?g" /etc/sysconfig/dnsmasq # default conf file for the first dnsmasq instance
1508 
	$SED "s?^.*OPTIONS=.*?#OPTIONS=\"--log-async=250 --log-queries --log-facility=/var/log/dnsmasq/queries.log\"?g" /etc/sysconfig/dnsmasq # General Options for dnslog or debugging
1961 richard 1509 
	$SED "s?^local=.*?local=/$DOMAIN/?g" $DIR_DEST_ETC/alcasar-dns-name # default domain name for all dnsmasq daemons
503 richard 1510 
	[ -e /etc/dnsmasq.conf.default ] || cp /etc/dnsmasq.conf /etc/dnsmasq.conf.default
1472 richard 1511 
# 1st dnsmasq listen on udp 53 ("dnsmasq - forward"). It's used as dhcp server only if "alcasar-bypass" is on.
1928 richard 1512 
	cat << EOF > /etc/dnsmasq.conf
520 richard 1513 
# Configuration file for "dnsmasq in forward mode"
1387 richard 1514 
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
259 richard 1515 
listen-address=$PRIVATE_IP
1390 richard 1516 
pid-file=/var/run/dnsmasq.pid
259 richard 1517 
listen-address=127.0.0.1
286 richard 1518 
no-dhcp-interface=$INTIF
1387 richard 1519 
no-dhcp-interface=tun0
1520 
no-dhcp-interface=lo
259 richard 1521 
bind-interfaces
1721 richard 1522 
cache-size=2048
259 richard 1523 
domain-needed
1524 
expand-hosts
1525 
bogus-priv
1526 
filterwin2k
1527 
server=$DNS1
1528 
server=$DNS2
1387 richard 1529 
# DHCP service is configured. It will be enabled in "bypass" mode
1610 franck 1530 
#dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h
1531 
#dhcp-option=option:router,$PRIVATE_IP
1532 
#dhcp-option=option:ntp-server,$PRIVATE_IP
1961 richard 1533 
#domain=$DOMAIN
259 richard 1534 
 
1387 richard 1535 
# Exemple of static dhcp assignation : <@MAC>,<name>,<@IP>,<MASK>,<ttl bail>
420 franck 1536 
#dhcp-host=11:22:33:44:55:66,ssic-test,192.168.182.20,255.255.255.0,45m
259 richard 1537 
EOF
1356 richard 1538 
# 2nd dnsmasq listen on udp 54 ("dnsmasq with blacklist")
1928 richard 1539 
	cat << EOF > /etc/dnsmasq-blacklist.conf
1390 richard 1540 
# Configuration file for "dnsmasq with blacklist"
1873 richard 1541 
# Add Toulouse University blacklist domains
1472 richard 1542 
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1015 richard 1543 
conf-dir=$DIR_DEST_SHARE/dnsmasq-bl-enabled
1390 richard 1544 
pid-file=/var/run/dnsmasq-blacklist.pid
498 richard 1545 
listen-address=$PRIVATE_IP
1546 
port=54
1547 
no-dhcp-interface=$INTIF
1387 richard 1548 
no-dhcp-interface=tun0
1472 richard 1549 
no-dhcp-interface=lo
498 richard 1550 
bind-interfaces
1721 richard 1551 
cache-size=2048
498 richard 1552 
domain-needed
1553 
expand-hosts
1554 
bogus-priv
1555 
filterwin2k
1556 
server=$DNS1
1557 
server=$DNS2
1558 
EOF
1379 richard 1559 
# 3rd dnsmasq listen on udp 55 ("dnsmasq with whitelist")
1928 richard 1560 
	cat << EOF > /etc/dnsmasq-whitelist.conf
1390 richard 1561 
# Configuration file for "dnsmasq with whitelist"
1873 richard 1562 
# ADD Toulouse university whitelist domains
1472 richard 1563 
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1356 richard 1564 
conf-dir=$DIR_DEST_SHARE/dnsmasq-wl-enabled
1472 richard 1565 
pid-file=/var/run/dnsmasq-whitelist.pid
1356 richard 1566 
listen-address=$PRIVATE_IP
1567 
port=55
1568 
no-dhcp-interface=$INTIF
1387 richard 1569 
no-dhcp-interface=tun0
1472 richard 1570 
no-dhcp-interface=lo
1356 richard 1571 
bind-interfaces
1721 richard 1572 
cache-size=1024
1356 richard 1573 
domain-needed
1574 
expand-hosts
1575 
bogus-priv
1576 
filterwin2k
1867 raphael.pi 1577 
ipset=/#/wl_ip_allowed			# dynamicly add the resolv IP address in the Firewall rules
1472 richard 1578 
address=/#/$PRIVATE_IP				# for Domain name without local resolution (WL)
1356 richard 1579 
EOF
1472 richard 1580 
# 4th dnsmasq listen on udp 56 ("blackhole")
1928 richard 1581 
	cat << EOF > /etc/dnsmasq-blackhole.conf
1472 richard 1582 
# Configuration file for "dnsmasq as a blackhole"
1583 
conf-file=$DIR_DEST_ETC/alcasar-dns-name	# local DNS resolutions
1584 
address=/#/$PRIVATE_IP				# redirect all on ALCASAR IP address
1585 
pid-file=/var/run/dnsmasq-blackhole.pid
1586 
listen-address=$PRIVATE_IP
1587 
port=56
1588 
no-dhcp-interface=$INTIF
1589 
no-dhcp-interface=tun0
1590 
no-dhcp-interface=lo
1591 
bind-interfaces
1592 
cache-size=256
1593 
domain-needed
1594 
expand-hosts
1595 
bogus-priv
1596 
filterwin2k
1597 
EOF
1598 
 
1517 richard 1599 
# the main instance should start after network and chilli (which create tun0)
1547 richard 1600 
	[ -e /lib/systemd/system/dnsmasq.service.default ] || cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
1517 richard 1601 
	$SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/dnsmasq.service
1474 richard 1602 
# Create dnsmasq-blacklist, dnsmasq-whitelist and dnsmasq-blackhole unit
1603 
	for list in blacklist whitelist blackhole
1604 
	do
1605 
		cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq-$list.service
1606 
		$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-$list.conf?g" /lib/systemd/system/dnsmasq-$list.service
1607 
		$SED "s?^PIDFile=.*?PIDFile=/var/run/dnsmasq-$list.pid?g" /lib/systemd/system/dnsmasq-$list.service
1608 
	done
308 richard 1609 
} # End dnsmasq
1610 
 
1611 
##########################################################
1221 richard 1612 
##		Fonction "BL"				##
308 richard 1613 
##########################################################
1614 
BL ()
1615 
{
1930 richard 1616 
	# copy the Toulouse university BL in order to be adapted to ALCASAR architecture (alcasar-bl.sh -adapt)
648 richard 1617 
	rm -rf $DIR_DG/lists/blacklists
1930 richard 1618 
	mkdir -p /tmp/blacklists
1938 richard 1619 
	cp $DIR_BLACKLIST/blacklists.tar.gz /tmp/blacklists/
1383 richard 1620 
# creation of file for the rehabilited domains and urls
648 richard 1621 
	[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
673 richard 1622 
	[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
648 richard 1623 
	touch $DIR_DG/lists/exceptionsitelist
1624 
	touch $DIR_DG/lists/exceptionurllist
311 richard 1625 
# On crée la configuration de base du filtrage de domaine et d'URL pour Dansguardian
648 richard 1626 
	cat <<EOF > $DIR_DG/lists/bannedurllist
311 richard 1627 
# Dansguardian filter config for ALCASAR
1628 
EOF
648 richard 1629 
	cat <<EOF > $DIR_DG/lists/bannedsitelist
311 richard 1630 
# Dansguardian domain filter config for ALCASAR
1631 
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
1632 
#**
1633 
# block all SSL and CONNECT tunnels
1634 
**s
1635 
# block all SSL and CONNECT tunnels specified only as an IP
1636 
*ips
1637 
# block all sites specified only by an IP
1638 
*ip
1639 
EOF
1852 raphael.pi 1640 
# Add Bing to the safesearch url regext list (parental control)
878 richard 1641 
	cat <<EOF >> $DIR_DG/lists/urlregexplist
1642 
# Bing - add 'adlt=strict'
1643 
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
1644 
EOF
1913 richard 1645 
# change the google safesearch ("safe=strict" instead of "safe=vss")
1003 richard 1646 
	$SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
1925 richard 1647 
# creation of the custom BL and WL categorie named "ossi" (for domain names & ip only)
1957 richard 1648 
	mkdir -p $DIR_DG/lists/blacklists/ossi-bl
1649 
	touch $DIR_DG/lists/blacklists/ossi-bl/domains
1650 
	echo "ossi-bl" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
1651 
	mkdir -p $DIR_DG/lists/blacklists/ossi-wl
1652 
	touch $DIR_DG/lists/blacklists/ossi-wl/domains
1653 
	echo "ossi-wl" >> $DIR_DEST_ETC/alcasar-wl-categories-enabled
1927 richard 1654 
# add custom ALCASAR BL files
1957 richard 1655 
	for x in $(ls $DIR_BLACKLIST | grep -v "^blacklist")
1656 
	do
1657 
		mkdir $DIR_DG/lists/blacklists/ossi-bl-$x
1658 
		cp $DIR_BLACKLIST/$x  $DIR_DG/lists/blacklists/ossi-bl-$x/domains
1659 
		echo "ossi-bl-$x" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
1660 
	done
1661 
	chown -R dansguardian:apache $DIR_DG
1662 
	chown -R root:apache $DIR_DEST_SHARE
1663 
	chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
1927 richard 1664 
# adapt the Toulouse BL to ALCASAR architecture
1957 richard 1665 
	$DIR_DEST_BIN/alcasar-bl.sh --adapt
1925 richard 1666 
# enable the default categories
1957 richard 1667 
	$DIR_DEST_BIN/alcasar-bl.sh --cat_choice
308 richard 1668 
}
219 jeremy 1669 
 
1 root 1670 
##########################################################
1221 richard 1671 
##		Fonction "cron"				##
1 root 1672 
## - Mise en place des différents fichiers de cron	##
1673 
##########################################################
1674 
cron ()
1675 
{
1676 
# Modif du fichier 'crontab' pour passer les cron à minuit au lieu de 04h00
1677 
	[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
1678 
	cat <<EOF > /etc/crontab
1828 richard 1679 
SHELL=/usr/bin/bash
1680 
PATH=/usr/sbin:/usr/bin
1 root 1681 
MAILTO=root
1682 
HOME=/
1683 
 
1684 
# run-parts
1685 
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
1686 
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
1687 
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
1688 
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
1689 
EOF
1690 
	[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
1691 
	cat <<EOF >> /etc/anacrontab
667 franck 1692 
7       8       cron.MysqlDump          nice /etc/cron.d/alcasar-mysql
1380 richard 1693 
7       10      cron.logExport          nice /etc/cron.d/alcasar-archive
667 franck 1694 
7	20	cron.importClean	nice /etc/cron.d/alcasar-clean_import
1 root 1695 
EOF
1247 crox53 1696 
 
811 richard 1697 
	cat <<EOF > /etc/cron.d/alcasar-mysql
868 richard 1698 
# Contrôle, réparation et export de la base des usagers (tous les lundi à 4h45)
1828 richard 1699 
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
905 franck 1700 
# Nettoyage des utilisateurs dont la date d'expiration du compte est supérieure à 7 jours
1828 richard 1701 
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
1 root 1702 
EOF
952 franck 1703 
	cat <<EOF > /etc/cron.d/alcasar-archive
1704 
# Archive des logs et de la base de données (tous les lundi à 5h35)
1705 
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
1706 
EOF
1566 richard 1707 
	cat << EOF > /etc/cron.d/alcasar-ticket-clean
1708 
# suppression des fichiers de mots de passe (imports massifs par fichier) et des ticket PDF d'utilisateur
1709 
30 * * * *  root $DIR_DEST_BIN/alcasar-ticket-clean.sh
168 franck 1710 
EOF
722 franck 1711 
	cat << EOF > /etc/cron.d/alcasar-distrib-updates
1712 
# mise à jour automatique de la distribution tous les jours 3h30
762 franck 1713 
30 3 * * *  root /usr/sbin/urpmi --auto-update --auto 2>&1
722 franck 1714 
EOF
1159 crox53 1715 
 
1945 richard 1716 
	cat << EOF > /etc/cron.d/alcasar-connections-stats
1808 richard 1717 
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
1718 
# 'alcasar-tot_stats' (everyday at 01h01 pm) : aggregating the daily connections of users (write in the table 'totacct')
1719 
# 'alcasar-monthly_tot_stat' (everyday at 01h05 pm) : aggregating the monthly connections of users (write in table 'mtotacct')
1720 
# 'alcasar-truncate_raddact' (every month, the first at 01h10 pm) : removing the log sessions of users older than 365 days
1721 
# 'alcasar-clean_radacct' (every month, the first at 01h15 pm) : closing the sessions openned for more than 30 days
1722 
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
1723 
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
1724 
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
1725 
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
1 root 1726 
EOF
671 franck 1727 
	cat << EOF > /etc/cron.d/alcasar-watchdog
1945 richard 1728 
# run the "watchdog" every 3'
1729 
# empty the IPSET of the whitelisted IP (loaded dynamically with dnsmasq-whitelist) when every whitelisted users are logged out (every sunday at 0h05
1 root 1730 
*/3 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
1905 raphael.pi 1731 
 
1 root 1732 
EOF
1808 richard 1733 
# Enabling the watchdog every 18'
808 franck 1734 
	cat << EOF > /etc/cron.d/alcasar-daemon-watchdog
1945 richard 1735 
# activate  the daemon-watchdog after boot process
1851 franck 1736 
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
1945 richard 1737 
# activate the daemon-watchdog every 18'
808 franck 1738 
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
1739 
EOF
1862 raphael.pi 1740 
 
1874 raphael.pi 1741 
# Enabling category update from rsync
1914 richard 1742 
	cat << EOF > /etc/cron.d/alcasar-rsync_bl
1945 richard 1743 
# Automatic update of BL via rsync every 12 hours. The categories are listed in the file '/usr/local/etc/update_cat.conf' (no sync if empty).
1905 raphael.pi 1744 
 
1874 raphael.pi 1745 
EOF
1862 raphael.pi 1746 
 
1808 richard 1747 
# removing the users crons
522 richard 1748 
	rm -f /var/spool/cron/*
1 root 1749 
} # End cron
1750 
 
1751 
##################################################################
1221 richard 1752 
## 			Fonction "Fail2Ban"			##
1163 crox53 1753 
##- Modification de la configuration de fail2ban		##
1754 
##- Sécurisation DDOS, SSH-Brute-Force, Intercept.php ...	##
1755 
##################################################################
1756 
fail2ban()
1757 
{
1191 crox53 1758 
	$DIR_CONF/fail2ban.sh
1474 richard 1759 
# Autorise la lecture seule 2 des 3 fichiers de log concernés, havp est traité dans le script d'init de havp
1192 crox53 1760 
	[ -e /var/log/fail2ban.log ] || touch /var/log/fail2ban.log
1489 richard 1761 
	[ -e /var/Save/security/watchdog.log ] || touch /var/Save/security/watchdog.log
1165 crox53 1762 
	chmod 644 /var/log/fail2ban.log
1489 richard 1763 
	chmod 644 /var/Save/security/watchdog.log
1418 richard 1764 
	/usr/bin/touch /var/log/auth.log
1515 richard 1765 
# fail2ban unit
1766 
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
1767 
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
1768 
$SED '/Type=/a\PIDFile=/var/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
1418 richard 1769 
$SED '/After=*/c After=syslog.target network.target httpd.service' /usr/lib/systemd/system/fail2ban.service
1163 crox53 1770 
} #Fin de fail2ban_install()
1771 
 
1772 
##################################################################
1376 richard 1773 
## 			Fonction "gammu_smsd"			##
1774 
## - Creation de la base de donnée Gammu			##
1775 
## - Creation du fichier de config: gammu_smsd_conf		##
1776 
##								##
1777 
##################################################################
1778 
gammu_smsd()
1779 
{
1780 
# Create 'gammu' databse
1781 
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
1782 
	$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_GAMMU;GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES"
1783 
# Add a gammu database structure
1800 richard 1784 
	mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql
1376 richard 1785 
 
1786 
# config file for the daemon
1787 
cat << EOF > /etc/gammu_smsd_conf
1788 
[gammu]
1789 
port = /dev/ttyUSB0
1790 
connection = at115200
1791 
 
1792 
;########################################################
1793 
 
1794 
[smsd]
1795 
 
1796 
PIN = 1234
1797 
 
1798 
logfile = /var/log/gammu-smsd/gammu-smsd.log
1799 
logformat = textall
1800 
debuglevel = 0
1801 
 
1802 
service = sql
1803 
driver = native_mysql
1804 
user = $DB_USER
1805 
password = $radiuspwd
1806 
pc = localhost
1807 
database = $DB_GAMMU
1808 
 
1828 richard 1809 
RunOnReceive = $DIR_DEST_BIN/alcasar-sms.sh --new_sms
1376 richard 1810 
 
1811 
StatusFrequency = 30
1380 richard 1812 
;LoopSleep = 2
1376 richard 1813 
 
1814 
;ResetFrequency = 300
1815 
;HardResetFrequency = 120
1816 
 
1817 
CheckSecurity = 1
1818 
CheckSignal = 1
1819 
CheckBattery = 0
1820 
EOF
1821 
 
1822 
chmod 755 /etc/gammu_smsd_conf
1823 
 
1824 
#Creation dossier de log Gammu-smsd
1382 richard 1825 
[ -e /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
1376 richard 1826 
chmod 755 /var/log/gammu-smsd
1827 
 
1828 
#Edition du script sql gammu <-> radius
1452 richard 1829 
$SED "s/^u_db=\".*/u_db=\"$DB_USER\"/g" $DIR_DEST_BIN/alcasar-sms.sh
1830 
$SED "s/^p_db=\".*/p_db=\"$radiuspwd\"/g" $DIR_DEST_BIN/alcasar-sms.sh
1376 richard 1831 
 
1380 richard 1832 
#Création de la règle udev pour les Huawei // idVendor: 12d1
1833 
cat << EOF > /etc/udev/rules.d/66-huawei.rules
1828 richard 1834 
KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
1380 richard 1835 
EOF
1836 
 
1376 richard 1837 
} # END gammu_smsd()
1838 
 
1839 
##################################################################
1221 richard 1840 
##			Fonction "post_install"			##
1 root 1841 
## - Modification des bannières (locales et ssh) et des prompts ##
1842 
## - Installation de la structure de chiffrement pour root	##
1843 
## - Mise en place du sudoers et de la sécurité sur les fichiers##
1844 
## - Mise en place du la rotation des logs			##
5 franck 1845 
## - Configuration dans le cas d'une mise à jour		##
1 root 1846 
##################################################################
1847 
post_install()
1848 
{
1849 
# création de la bannière locale
1007 richard 1850 
	[ -e /etc/mageia-release.default ]  || cp /etc/mageia-release /etc/mageia-release.default
1851 
	cp -f $DIR_CONF/banner /etc/mageia-release
1852 
	echo " V$VERSION" >> /etc/mageia-release
1 root 1853 
# création de la bannière SSH
1007 richard 1854 
	cp /etc/mageia-release /etc/ssh/alcasar-banner-ssh
5 franck 1855 
	chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
1 root 1856 
	[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
1857 
	$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
1858 
	$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
793 richard 1859 
# postfix banner anonymisation
1860 
	$SED "s?^smtpd_banner =.*?smtpd_banner = $myhostname ESMTP?g" /etc/postfix/main.cf
1841 richard 1861 
	chown -R postfix:postfix /var/lib/postfix
604 richard 1862 
# sshd écoute côté LAN et WAN
1548 richard 1863 
	$SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
1696 franck 1864 
# sshd autorise les connections root par certificat
1865 
	$SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
1769 richard 1866 
	# Put the default values in conf file
1839 richard 1867 
	echo "SSH=on" >> $CONF_FILE
1631 richard 1868 
	echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
628 richard 1869 
	echo "LDAP=off" >> $CONF_FILE
786 richard 1870 
	echo "LDAP_IP=0.0.0.0/0.0.0.0" >> $CONF_FILE
1078 franck 1871 
	echo "MULTIWAN=off" >> $CONF_FILE
1872 
	echo "FAILOVER=30" >> $CONF_FILE
1873 
	echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
1336 richard 1874 
	echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
1875 
	echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
1 root 1876 
# Coloration des prompts
1877 
	[ -e /etc/bashrc.default ]  || cp /etc/bashrc /etc/bashrc.default
5 franck 1878 
	cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
630 franck 1879 
	$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
1 root 1880 
# Droits d'exécution pour utilisateur apache et sysadmin
1881 
	[ -e /etc/sudoers.default ]  || cp /etc/sudoers /etc/sudoers.default
5 franck 1882 
	cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
629 richard 1883 
	$SED "s?^Host_Alias.*?Host_Alias	LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost		#réseau de l'organisme?g" /etc/sudoers
1543 richard 1884 
# Modify some logrotate files (gammu, ulogd)
1 root 1885 
	cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
1886 
	chmod 644 /etc/logrotate.d/*
714 franck 1887 
# rectification sur versions précédentes de la compression des logs
706 franck 1888 
	$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
1889 
# actualisation des fichiers logs compressés
1342 richard 1890 
	for dir in firewall dansguardian httpd
706 franck 1891 
	do
714 franck 1892 
	      find /var/log/$dir -type f -name *.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] -exec gzip {} \;
706 franck 1893 
	done
1221 richard 1894 
# create the alcasar-load_balancing unit
1895 
	cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
1184 crox53 1896 
#  This file is part of systemd.
1897 
#
1898 
#  systemd is free software; you can redistribute it and/or modify it
1899 
#  under the terms of the GNU General Public License as published by
1900 
#  the Free Software Foundation; either version 2 of the License, or
1901 
#  (at your option) any later version.
1902 
 
1903 
# This unit lauches alcasar-load-balancing.sh script.
1904 
[Unit]
1905 
Description=alcasar-load_balancing.sh execution
1906 
After=network.target iptables.service
1907 
 
1908 
[Service]
1909 
Type=oneshot
1910 
RemainAfterExit=yes
1828 richard 1911 
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
1912 
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
1184 crox53 1913 
TimeoutSec=0
1914 
SysVStartPriority=99
1915 
 
1916 
[Install]
1917 
WantedBy=multi-user.target
1157 stephane 1918 
EOF
1221 richard 1919 
# processes launched at boot time (Systemctl)
1839 richard 1920 
	for i in alcasar-load_balancing mysqld httpd ntpd iptables dnsmasq dnsmasq-blacklist dnsmasq-whitelist dnsmasq-blackhole radiusd nfsen dansguardian freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
1221 richard 1921 
	do
1574 richard 1922 
		/usr/bin/systemctl -q enable $i.service
1221 richard 1923 
	done
1452 richard 1924 
 
1925 
# disable processes at boot time (Systemctl)
1926 
	for i in ulogd
1927 
	do
1574 richard 1928 
		/usr/bin/systemctl -q disable $i.service
1452 richard 1929 
	done
1930 
 
1221 richard 1931 
# Apply French Security Agency (ANSSI) rules
1362 richard 1932 
# ignore ICMP broadcast (smurf attack)
1933 
	echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
1934 
# ignore ICMP errors bogus
1935 
	echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
1936 
# remove ICMP redirects responces
1937 
	echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
1938 
	echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
1939 
# enable SYN Cookies (Syn flood attacks)
1940 
	echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
1941 
# enable kernel antispoofing
1942 
	echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
1943 
# ignore source routing
1944 
	echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
1945 
# set conntrack timer to 1h (3600s) instead of 5 weeks
1946 
	echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
1157 stephane 1947 
# disable log_martians (ALCASAR is often installed between two private network addresses)
1363 richard 1948 
	echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
1778 richard 1949 
# disable iptables_helpers
1950 
	echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
1788 richard 1951 
# Switch to the router mode
1952 
	echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
1917 franck 1953 
# Remove unused service ipv6
1964 franck 1954 
	echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
1955 
	echo "net.ipv6.conf.all.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
1956 
	echo "net.ipv6.conf.default.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
1957 
	echo "net.ipv6.conf.default.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
1362 richard 1958 
# remove Magic SysReq Keys
1363 richard 1959 
	[ -e /etc/sysctl.d/51-alt-sysrq.conf ] && rm /etc/sysctl.d/51-alt-sysrq.conf
1003 richard 1960 
# switch to multi-users runlevel (instead of x11)
1221 richard 1961 
	ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
1600 richard 1962 
#	GRUB modifications (only one time)
1005 richard 1963 
# limit wait time to 3s
1964 
# create an alcasar entry instead of linux-nonfb
1965 
# change display to 1024*768 (vga791)
1600 richard 1966 
	grub_already_modified=`grep ALCASAR /boot/grub/menu.lst|wc -l`
1967 
	if [ $grub_already_modified == 0 ]
1968 
		then
1969 
		$SED "s?^timeout.*?timeout 3?g" /boot/grub/menu.lst
1970 
		$SED "s?^title linux?title ALCASAR?g" /boot/grub/menu.lst
1971 
		$SED "/^kernel/s/splash quiet //" /boot/grub/menu.lst
1601 richard 1972 
		$SED "/^kernel/s/$/ vga=791/" /boot/grub/menu.lst
1600 richard 1973 
		$SED "/^kernel/s/BOOT_IMAGE=linux /BOOT_IMAGE=linux-nonfb /" /boot/grub/menu.lst
1974 
		$SED "/^gfxmenu/d" /boot/grub/menu.lst
1975 
	fi
1221 richard 1976 
# Load and apply the previous conf file
1977 
	if [ "$mode" = "update" ]
532 richard 1978 
	then
1668 richard 1979 
		$DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
1221 richard 1980 
		$DIR_DEST_BIN/alcasar-conf.sh --load
1981 
		PARENT_SCRIPT=`basename $0`
1982 
		export PARENT_SCRIPT # to avoid stop&start process during the installation process
1983 
		$DIR_DEST_BIN/alcasar-conf.sh --apply
1984 
		$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
1985 
		$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
532 richard 1986 
	fi
1221 richard 1987 
	rm -f /tmp/alcasar-conf*
1988 
	chown -R root:apache $DIR_DEST_ETC/*
1989 
	chmod -R 660 $DIR_DEST_ETC/*
1990 
	chmod ug+x $DIR_DEST_ETC/digest
1 root 1991 
	cd $DIR_INSTALL
5 franck 1992 
	echo ""
1 root 1993 
	echo "#############################################################################"
638 richard 1994 
	if [ $Lang == "fr" ]
1995 
		then
1996 
		echo "#                        Fin d'installation d'ALCASAR                       #"
1997 
		echo "#                                                                           #"
1998 
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
1999 
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
2000 
		echo "#                                                                           #"
2001 
		echo "#############################################################################"
2002 
		echo
2003 
		echo "- ALCASAR sera fonctionnel après redémarrage du système"
2004 
		echo
2005 
		echo "- Lisez attentivement la documentation d'exploitation"
2006 
		echo
2007 
		echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://alcasar"
2008 
		echo
2009 
		echo "                   Appuyez sur 'Entrée' pour continuer"
2010 
	else
2011 
		echo "#                        Enf of ALCASAR install process                     #"
2012 
		echo "#                                                                           #"
2013 
		echo "#         Application Libre pour le Contrôle Authentifié et Sécurisé        #"
2014 
		echo "#                     des Accès au Réseau ( ALCASAR )                       #"
2015 
		echo "#                                                                           #"
2016 
		echo "#############################################################################"
2017 
		echo
2018 
		echo "- The system will be rebooted in order to operate ALCASAR"
2019 
		echo
2020 
		echo "- Read the exploitation documentation"
2021 
		echo
2022 
		echo "- The ALCASAR Control Center (ACC) is at http://alcasar"
2023 
		echo
2024 
		echo "                   Hit 'Enter' to continue"
2025 
	fi
1782 franck 2026 
	sleep 2
815 richard 2027 
	if [ "$mode" != "update" ]
820 richard 2028 
	then
815 richard 2029 
		read a
2030 
	fi
774 richard 2031 
	clear
1 root 2032 
	reboot
2033 
} # End post_install ()
2034 
 
2035 
#################################
1005 richard 2036 
#  	Main Install loop  	#
1 root 2037 
#################################
832 richard 2038 
dir_exec=`dirname "$0"`
2039 
if [ $dir_exec != "." ]
2040 
then
2041 
	echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
2042 
	echo "Launch this program from the ALCASAR archive directory"
2043 
	exit 0
2044 
fi
2045 
VERSION=`cat $DIR_INSTALL/VERSION`
291 franck 2046 
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
1 root 2047 
nb_args=$#
2048 
args=$1
2049 
if [ $nb_args -eq 0 ]
2050 
then
2051 
	nb_args=1
2052 
	args="-h"
2053 
fi
1062 richard 2054 
chmod -R u+x $DIR_SCRIPTS/*
1 root 2055 
case $args in
2056 
	-\? | -h* | --h*)
2057 
		echo "$usage"
2058 
		exit 0
2059 
		;;
291 franck 2060 
	-i | --install)
1538 richard 2061 
		header_install
959 franck 2062 
		license
1544 richard 2063 
		header_install
29 richard 2064 
		testing
595 richard 2065 
# RPMs install
2066 
		$DIR_SCRIPTS/alcasar-urpmi.sh
2067 
		if [ "$?" != "0" ]
1 root 2068 
		then
595 richard 2069 
			exit 0
2070 
		fi
1249 richard 2071 
		if [ -e $CONF_FILE ]
595 richard 2072 
		then
597 richard 2073 
# Uninstall the running version
1828 richard 2074 
			$DIR_SCRIPTS/alcasar-uninstall.sh
595 richard 2075 
		fi
636 richard 2076 
# Test if manual update
1362 richard 2077 
		if [ -e /tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
595 richard 2078 
		then
636 richard 2079 
			header_install
595 richard 2080 
			if [ $Lang == "fr" ]
636 richard 2081 
				then echo "Le fichier de configuration d'une ancienne version a été trouvé";
2082 
				else echo "The configuration file of an old version has been found";
595 richard 2083 
			fi
597 richard 2084 
			response=0
2085 
			PTN='^[oOnNyY]$'
2086 
			until [[ $(expr $response : $PTN) -gt 0 ]]
2087 
			do
2088 
				if [ $Lang == "fr" ]
2089 
					then echo -n "Voulez-vous l'utiliser (O/n)? ";
2090 
					else echo -n "Do you want to use it (Y/n)?";
2091 
				 fi
2092 
				read response
2093 
				if [ "$response" = "n" ] || [ "$response" = "N" ]
2094 
				then rm -f /tmp/alcasar-conf*
2095 
				fi
2096 
			done
2097 
		fi
636 richard 2098 
# Test if update
1057 richard 2099 
		if [ -e /tmp/alcasar-conf* ]
597 richard 2100 
		then
2101 
			if [ $Lang == "fr" ]
2102 
				then echo "#### Installation avec mise à jour ####";
2103 
				else echo "#### Installation with update     ####";
2104 
			fi
636 richard 2105 
# Extract the central configuration file
1057 richard 2106 
			tar -xf /tmp/alcasar-conf* conf/etc/alcasar.conf
637 richard 2107 
			ORGANISME=`grep ORGANISM conf/etc/alcasar.conf|cut -d"=" -f2`
1010 richard 2108 
			PREVIOUS_VERSION=`grep VERSION conf/etc/alcasar.conf|cut -d"=" -f2`
2109 
			MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
2110 
			MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2|cut -c1`
2111 
			UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3`
5 franck 2112 
			mode="update"
1 root 2113 
		fi
1837 richard 2114 
		for func in init network ACC CA time_server init_db radius chilli dansguardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq BL cron fail2ban gammu_smsd post_install
5 franck 2115 
		do
2116 
			$func
1362 richard 2117 
# echo "*** 'debug' : end of function $func ***"; read a
14 richard 2118 
		done
5 franck 2119 
		;;
291 franck 2120 
	-u | --uninstall)
1828 richard 2121 
		if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
1 root 2122 
		then
597 richard 2123 
			if [ $Lang == "fr" ]
2124 
				then echo "ALCASAR n'est pas installé!";
2125 
				else echo "ALCASAR isn't installed!";
2126 
			fi
1 root 2127 
			exit 0
2128 
		fi
5 franck 2129 
		response=0
2130 
		PTN='^[oOnN]$'
580 richard 2131 
		until [[ $(expr $response : $PTN) -gt 0 ]]
5 franck 2132 
		do
597 richard 2133 
			if [ $Lang == "fr" ]
2134 
				then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
854 richard 2135 
				else echo -n "Do you want to create the running version configuration file (Y/n)? ";
597 richard 2136 
			fi
5 franck 2137 
			read response
2138 
		done
1103 richard 2139 
		if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
1 root 2140 
		then
1103 richard 2141 
			$DIR_SCRIPTS/alcasar-conf.sh --create
498 richard 2142 
		else
2143 
			rm -f /tmp/alcasar-conf*
1 root 2144 
		fi
597 richard 2145 
# Uninstall the running version
1828 richard 2146 
		$DIR_SCRIPTS/alcasar-uninstall.sh
1 root 2147 
		;;
2148 
	*)
2149 
		echo "Argument inconnu :$1";
460 richard 2150 
		echo "Unknown argument :$1";
1 root 2151 
		echo "$usage"
2152 
		exit 1
2153 
		;;
2154 
esac
10 franck 2155 
# end of script
366 franck 2156