Subversion Repositories ALCASAR

Compare Revisions

Ignore whitespace Rev 2419 → Rev 2420

/conf/radius/sql
0,0 → 1,264
# -*- text -*-
##
## sql.conf -- SQL modules
##
## $Id: 4a59483c35c77f573fb177919e19ba4434cc3da1 $
 
######################################################################
#
# Configuration for the SQL module
#
# The database schemas and queries are located in subdirectories:
#
# sql/<DB>/main/schema.sql Schema
# sql/<DB>/main/queries.conf Authorisation and Accounting queries
#
# Where "DB" is mysql, mssql, oracle, or postgresql.
#
#
 
sql {
# The sub-module to use to execute queries. This should match
# the database you're attempting to connect to.
#
# * rlm_sql_mysql
# * rlm_sql_mssql
# * rlm_sql_oracle
# * rlm_sql_postgresql
# * rlm_sql_sqlite
# * rlm_sql_null (log queries to disk)
#
driver = "rlm_sql_mysql"
 
#
# Several drivers accept specific options, to set them, a
# config section with the the name as the driver should be added
# to the sql instance.
#
# Driver specific options are:
#
# sqlite {
# # Path to the sqlite database
# filename = "/tmp/freeradius.db"
#
# # How long to wait for write locks on the database to be
# # released (in ms) before giving up.
# busy_timeout = 200
#
# # If the file above does not exist and bootstrap is set
# # a new database file will be created, and the SQL statements
# # contained within the bootstrap file will be executed.
# bootstrap = "${modconfdir}/${..:name}/main/sqlite/schema.sql"
# }
#
# mysql {
# # If any of the files below are set, TLS encryption is enabled
# tls {
# ca_file = "/etc/ssl/certs/my_ca.crt"
# ca_path = "/etc/ssl/certs/"
# certificate_file = "/etc/ssl/certs/private/client.crt"
# private_key_file = "/etc/ssl/certs/private/client.key"
# cipher = "DHE-RSA-AES256-SHA:AES128-SHA"
# }
#
# # If yes, (or auto and libmysqlclient reports warnings are
# # available), will retrieve and log additional warnings from
# # the server if an error has occured. Defaults to 'auto'
# warnings = auto
# }
#
# postgresql {
#
# # unlike MySQL, which has a tls{} connection configuration, postgresql
# # uses its connection parameters - see the radius_db option below in
# # this file
#
# # Send application_name to the postgres server
# # Only supported in PG 9.0 and greater. Defaults to no.
# send_application_name = yes
# }
#
 
# The dialect of SQL you want to use, this should usually match
# the driver you selected above.
#
# If you're using rlm_sql_null, then it should be the type of
# database the logged queries are going to be executed against.
dialect = "mysql"
 
# Connection info:
#
server = "localhost"
port = 3306
login = "radius"
password = "radpass"
 
# Database table configuration for everything except Oracle
radius_db = "radius"
 
# If you are using Oracle then use this instead
# radius_db = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))"
 
# If you're using postgresql this can also be used instead of the connection info parameters
# radius_db = "dbname=radius host=localhost user=radius password=raddpass"
 
# Postgreql doesn't take tls{} options in its module config like mysql does - if you want to
# use SSL connections then use this form of connection info parameter
# radius_db = "host=localhost port=5432 dbname=radius user=radius password=raddpass sslmode=verify-full sslcert=/etc/ssl/client.crt sslkey=/etc/ssl/client.key sslrootcert=/etc/ssl/ca.crt"
 
# If you want both stop and start records logged to the
# same SQL table, leave this as is. If you want them in
# different tables, put the start table in acct_table1
# and stop table in acct_table2
acct_table1 = "radacct"
acct_table2 = "radacct"
 
# Allow for storing data after authentication
postauth_table = "radpostauth"
 
# Tables containing 'check' items
authcheck_table = "radcheck"
groupcheck_table = "radgroupcheck"
 
# Tables containing 'reply' items
authreply_table = "radreply"
groupreply_table = "radgroupreply"
 
# Table to keep group info
usergroup_table = "radusergroup"
 
# If set to 'yes' (default) we read the group tables unless Fall-Through = no in the reply table.
# If set to 'no' we do not read the group tables unless Fall-Through = yes in the reply table.
# read_groups = yes
 
# If set to 'yes' (default) we read profiles unless Fall-Through = no in the groupreply table.
# If set to 'no' we do not read profiles unless Fall-Through = yes in the groupreply table.
# read_profiles = yes
 
# Remove stale session if checkrad does not see a double login
delete_stale_sessions = yes
 
# Write SQL queries to a logfile. This is potentially useful for tracing
# issues with authorization queries. See also "logfile" directives in
# mods-config/sql/main/*/queries.conf. You can enable per-section logging
# by enabling "logfile" there, or global logging by enabling "logfile" here.
#
# Per-section logging can be disabled by setting "logfile = ''"
# logfile = ${logdir}/sqllog.sql
 
# Set the maximum query duration and connection timeout
# for rlm_sql_mysql.
# query_timeout = 5
 
# As of version 3.0, the "pool" section has replaced the
# following configuration items:
#
# num_sql_socks
# connect_failure_retry_delay
# lifetime
# max_queries
 
#
# The connection pool is new for 3.0, and will be used in many
# modules, for all kinds of connection-related activity.
#
# When the server is not threaded, the connection pool
# limits are ignored, and only one connection is used.
#
# If you want to have multiple SQL modules re-use the same
# connection pool, use "pool = name" instead of a "pool"
# section. e.g.
#
# sql1 {
# ...
# pool {
# ...
# }
# }
#
# # sql2 will use the connection pool from sql1
# sql2 {
# ...
# pool = sql1
# }
#
pool {
# Connections to create during module instantiation.
# If the server cannot create specified number of
# connections during instantiation it will exit.
# Set to 0 to allow the server to start without the
# database being available.
start = ${thread[pool].start_servers}
 
# Minimum number of connections to keep open
min = ${thread[pool].min_spare_servers}
 
# Maximum number of connections
#
# If these connections are all in use and a new one
# is requested, the request will NOT get a connection.
#
# Setting 'max' to LESS than the number of threads means
# that some threads may starve, and you will see errors
# like 'No connections available and at max connection limit'
#
# Setting 'max' to MORE than the number of threads means
# that there are more connections than necessary.
max = ${thread[pool].max_servers}
 
# Spare connections to be left idle
#
# NOTE: Idle connections WILL be closed if "idle_timeout"
# is set. This should be less than or equal to "max" above.
spare = ${thread[pool].max_spare_servers}
 
# Number of uses before the connection is closed
#
# 0 means "infinite"
uses = 0
 
# The number of seconds to wait after the server tries
# to open a connection, and fails. During this time,
# no new connections will be opened.
retry_delay = 30
 
# The lifetime (in seconds) of the connection
lifetime = 0
 
# idle timeout (in seconds). A connection which is
# unused for this length of time will be closed.
idle_timeout = 60
 
# NOTE: All configuration settings are enforced. If a
# connection is closed because of "idle_timeout",
# "uses", or "lifetime", then the total number of
# connections MAY fall below "min". When that
# happens, it will open a new connection. It will
# also log a WARNING message.
#
# The solution is to either lower the "min" connections,
# or increase lifetime/idle_timeout.
}
 
# Set to 'yes' to read radius clients from the database ('nas' table)
# Clients will ONLY be read on server startup.
# read_clients = yes
 
# Table to keep radius client info
client_table = "nas"
 
#
# The group attribute specific to this instance of rlm_sql
#
 
# This entry should be used for additional instances (sql foo {})
# of the SQL module.
# group_attribute = "${.:instance}-SQL-Group"
 
# This entry should be used for the default instance (sql {})
# of the SQL module.
group_attribute = "SQL-Group"
 
# Read database-specific queries
$INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf
}