WebSVN – ALCASAR – Diff – /scripts/alcasar-condown.sh


#!/bin/sh
 
# alcasar-condown.sh
# by Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# This script is launched after each logout
# Ce script est lancé à chaque déconnexion d'usager
 
# Debug : show all the coova parse variables. There are declared in /src/chilli.c
#echo "------------------------------------------------------------" >> /tmp/debug-condown.txt
#echo `date` >> /tmp/debug-condown.txt
#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE
#do
#	echo "$i : ${!i}" >> /tmp/debug-condown.txt
#done
 
# Remove user from his IPSET (depending on FILTER_ID)
 
#12345678
#1-> profile1
#2-> profile2
#3-> profile3
#6-> WL
#7-> BL
#8-> HAVP
 
if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP
then 
	set="havp"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL
then 
	set="havp_bl"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL
then 
	set="havp_wl"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
 
 
if [ -z "$set"  ] #NOT_FILTERED
then 
	set="not_filtered"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
 
ipset del $set $FRAMED_IP_ADDRESS
ipset del $set_proto $FRAMED_IP_ADDRESS
 

Rev 2068	Rev 2069
1	`#!/bin/sh`	1	`#!/bin/sh`
2		2
3	`# alcasar-condown.sh`	3	`# alcasar-condown.sh`
4	`# by Rexy`	4	`# by Rexy`
5	`# This script is distributed under the Gnu General Public License (GPL)`	5	`# This script is distributed under the Gnu General Public License (GPL)`
6		6
7	`# This script is launched after each logout`	7	`# This script is launched after each logout`
8	`# Ce script est lancé à chaque déconnexion d'usager`	8	`# Ce script est lancé à chaque déconnexion d'usager`
9		9
10	`# Debug : show all the coova parse variables. There are declared in /src/chilli.c`	10	`# Debug : show all the coova parse variables. There are declared in /src/chilli.c`
-		11	`#echo "------------------------------------------------------------" >> /tmp/debug-condown.txt`
11	`#echo "parse coova variables" > /tmp/debug-conup.txt`	12	#echo `date` >> /tmp/debug-condown.txt
12	#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE	13	#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE
13	`#do`	14	`#do`
14	`# echo "$i : ${!i}" >> /tmp/debug-condown.txt`	15	`# echo "$i : ${!i}" >> /tmp/debug-condown.txt`
15	`#done`	16	`#done`
16		17
17	`# Remove user from the SET (function of his filtering level)`	18	`# Remove user from his IPSET (depending on FILTER_ID)`
18		19
19	`#12345678`	20	`#12345678`
20	`#1-> profile1`	21	`#1-> profile1`
21	`#2-> profile2`	22	`#2-> profile2`
22	`#3-> profile3`	23	`#3-> profile3`
23	`#6-> WL`	24	`#6-> WL`
24	`#7-> BL`	25	`#7-> BL`
25	`#8-> HAVP`	26	`#8-> HAVP`
26		27
27	`if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP`	28	`if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP`
28	`then`	29	`then`
29	`set="havp"`	30	`set="havp"`
30	`if [ ${FILTER_ID:0:1} -eq '1' ]`	31	`if [ ${FILTER_ID:0:1} -eq '1' ]`
31	`then`	32	`then`
32	`set_proto="proto_1";`	33	`set_proto="proto_1";`
33	`fi`	34	`fi`
34		35
35	`if [ ${FILTER_ID:1:1} -eq '1' ]`	36	`if [ ${FILTER_ID:1:1} -eq '1' ]`
36	`then`	37	`then`
37	`set_proto="proto_2";`	38	`set_proto="proto_2";`
38	`fi`	39	`fi`
39		40
40	`if [ ${FILTER_ID:2:1} -eq '1' ]`	41	`if [ ${FILTER_ID:2:1} -eq '1' ]`
41	`then`	42	`then`
42	`set_proto="proto_3";`	43	`set_proto="proto_3";`
43	`fi`	44	`fi`
44		45
45	`if [ -z "$set_proto" ]`	46	`if [ -z "$set_proto" ]`
46	`then`	47	`then`
47	`set_proto="proto_0";`	48	`set_proto="proto_0";`
48	`fi`	49	`fi`
49	`fi`	50	`fi`
50		51
51	`if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL`	52	`if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL`
52	`then`	53	`then`
53	`set="havp_bl"`	54	`set="havp_bl"`
54	`if [ ${FILTER_ID:0:1} -eq '1' ]`	55	`if [ ${FILTER_ID:0:1} -eq '1' ]`
55	`then`	56	`then`
56	`set_proto="proto_1";`	57	`set_proto="proto_1";`
57	`fi`	58	`fi`
58		59
59	`if [ ${FILTER_ID:1:1} -eq '1' ]`	60	`if [ ${FILTER_ID:1:1} -eq '1' ]`
60	`then`	61	`then`
61	`set_proto="proto_2";`	62	`set_proto="proto_2";`
62	`fi`	63	`fi`
63		64
64	`if [ ${FILTER_ID:2:1} -eq '1' ]`	65	`if [ ${FILTER_ID:2:1} -eq '1' ]`
65	`then`	66	`then`
66	`set_proto="proto_3";`	67	`set_proto="proto_3";`
67	`fi`	68	`fi`
68		69
69	`if [ -z "$set_proto" ]`	70	`if [ -z "$set_proto" ]`
70	`then`	71	`then`
71	`set_proto="proto_0";`	72	`set_proto="proto_0";`
72	`fi`	73	`fi`
73	`fi`	74	`fi`
74		75
75	`if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL`	76	`if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL`
76	`then`	77	`then`
77	`set="havp_wl"`	78	`set="havp_wl"`
78	`if [ ${FILTER_ID:0:1} -eq '1' ]`	79	`if [ ${FILTER_ID:0:1} -eq '1' ]`
79	`then`	80	`then`
80	`set_proto="proto_1";`	81	`set_proto="proto_1";`
81	`fi`	82	`fi`
82		83
83	`if [ ${FILTER_ID:1:1} -eq '1' ]`	84	`if [ ${FILTER_ID:1:1} -eq '1' ]`
84	`then`	85	`then`
85	`set_proto="proto_2";`	86	`set_proto="proto_2";`
86	`fi`	87	`fi`
87		88
88	`if [ ${FILTER_ID:2:1} -eq '1' ]`	89	`if [ ${FILTER_ID:2:1} -eq '1' ]`
89	`then`	90	`then`
90	`set_proto="proto_3";`	91	`set_proto="proto_3";`
91	`fi`	92	`fi`
92		93
93	`if [ -z "$set_proto" ]`	94	`if [ -z "$set_proto" ]`
94	`then`	95	`then`
95	`set_proto="proto_0";`	96	`set_proto="proto_0";`
96	`fi`	97	`fi`
97	`fi`	98	`fi`
98		99
99		100
100		101
101	`if [ -z "$set" ] #NOT_FILTERED`	102	`if [ -z "$set" ] #NOT_FILTERED`
102	`then`	103	`then`
103	`set="not_filtered"`	104	`set="not_filtered"`
104	`if [ ${FILTER_ID:0:1} -eq '1' ]`	105	`if [ ${FILTER_ID:0:1} -eq '1' ]`
105	`then`	106	`then`
106	`set_proto="proto_1";`	107	`set_proto="proto_1";`
107	`fi`	108	`fi`
108		109
109	`if [ ${FILTER_ID:1:1} -eq '1' ]`	110	`if [ ${FILTER_ID:1:1} -eq '1' ]`
110	`then`	111	`then`
111	`set_proto="proto_2";`	112	`set_proto="proto_2";`
112	`fi`	113	`fi`
113		114
114	`if [ ${FILTER_ID:2:1} -eq '1' ]`	115	`if [ ${FILTER_ID:2:1} -eq '1' ]`
115	`then`	116	`then`
116	`set_proto="proto_3";`	117	`set_proto="proto_3";`
117	`fi`	118	`fi`
118		119
119	`if [ -z "$set_proto" ]`	120	`if [ -z "$set_proto" ]`
120	`then`	121	`then`
121	`set_proto="proto_0";`	122	`set_proto="proto_0";`
122	`fi`	123	`fi`
123	`fi`	124	`fi`
124		125
125		126
126	`ipset del $set $FRAMED_IP_ADDRESS`	127	`ipset del $set $FRAMED_IP_ADDRESS`
127	`ipset del $set_proto $FRAMED_IP_ADDRESS`	128	`ipset del $set_proto $FRAMED_IP_ADDRESS`
128		129

Subversion Repositories ALCASAR

(root)/scripts/alcasar-condown.sh @ 2007 – Rev 2068 → 2069