WebSVN – ALCASAR – Diff – /web/acc/admin/network.php

 <?php
 /* written by steweb57 & Rexy */
-/***************************************
+/********************
-* CONSTANTES AVEC CHEMINS DES FICHIERS *
+* TEST CONF FILES   *
-****************************************/
+*********************/
 define ("ALCASAR_CHILLI", "/etc/chilli.conf");
 define ("CONF_FILE", "/usr/local/etc/alcasar.conf");
 define ("ETHERS_FILE", "/usr/local/etc/alcasar-ethers");
-/********************
-* TEST DES FICHIERS *
-*********************/
-//Test de présence et des droits en lecture des fichiers de configuration.
-if (!file_exists(ALCASAR_CHILLI)){
+$conf_files=array(ALCASAR_CHILLI,CONF_FILE,ETHERS_FILE);
-	exit("Fichier de configuration ".ALCASAR_CHILLI." non présent");
-}
-if (!is_readable(ALCASAR_CHILLI)){
+foreach ($conf_files as $file){
-	exit("Vous n'avez pas les droits de lecture sur le fichier ".ALCASAR_CHILLI);
-}
-if (!file_exists(CONF_FILE)){
+if (!file_exists($file)){
-	exit("Fichier de configuration ".CONF_FILE." non présent");
+	exit("Requested file ".$file." isn't present");}
-}
-if (!is_readable(CONF_FILE)){
+if (!is_readable($file)){
-	exit("Vous n'avez pas les droits de lecture sur le fichier ".CONF_FILE);
-}
-if (!file_exists(ETHERS_FILE)){
-	exit("Fichier de configuration ".ETHERS_FILE." non présent");
-}
-if (!is_readable(ETHERS_FILE)){
+	exit("Can't read the file ".$file);}
-	exit("Vous n'avez pas les droits de lecture sur le fichier ".ETHERS_FILE);
+}
 # Choice of language
 $Language = 'en';
 if(isset($_SERVER['HTTP_ACCEPT_LANGUAGE'])){
 	$l_ip_mask		= "Masque";
 	$l_ip_router		= "Passerelle";
 	$l_ip_public		= "Adresse IP publique";
 	$l_ip_dns1		= "DNS1";
 	$l_ip_dns2		= "DNS2";
-	$l_dhcp_title		= "Serveur DHCP";
+	$l_dhcp_title		= "Service DHCP";
-	$l_dhcp_on		= "Le service DHCP est actuellement activé";
+	$l_DHCP_full		= "DHCP complet";
+	$l_DHCP_half		= "Demi DHCP ";
+	$l_DHCP_off		= "Sans DHCP";
-	$l_dhcp_off		= "Le service DHCP est actuellement arrêté";
+	$l_DHCP_full_explain	= "DHCP complet";
-	$l_switch_on		= "Démarrer le service DHCP";
+	$l_DHCP_half_explain	= "Demi DHCP ";
-	$l_switch_off		= "Arrêter le service DHCP";
+	$l_DHCP_off_explain	= "Sans DHCP";
 	$l_static_dhcp_title	= "Réservation d'adresses IP statiques";
 	$l_mac_address		= "Adresse MAC";
 	$l_ip_address		= "Adresse IP";
 	$l_mac_del		= "Supprimer de la liste";
 	$l_add_to_list		= "Ajouter";
-	$l_submit		= "Appliquer";
+	$l_apply		= "Appliquer les changements";
 } else {
 	$l_network_title	= "Network configuration";
 	$l_eth0_legend		= "Eth0 (Internet connected interface)";
 	$l_eth1_legend		= "Eth1 (Private network)";
 	$l_ip_mask		= "Mask";
 	$l_ip_router		= "Gateway";
 	$l_ip_public		= "Public IP address";
 	$l_ip_dns1		= "DNS1 :";
 	$l_ip_dns2		= "DNS2";
-	$l_dhcp_title		= "DHCP server";
+	$l_dhcp_title		= "DHCP service";
+	$l_DHCP_full		= "Full DHCP";
-	$l_dhcp_on		= "The DHCP service is enabled";
+	$l_DHCP_half		= "Half DHCP ";
-	$l_dhcp_off		= "The DHCP service is disabled";
+	$l_DHCP_off		= "No DHCP";
+	$l_DHCP_full_explain	= "Full DHCP";
-	$l_switch_on		= "Start the DHCP service";
+	$l_DHCP_half_explain	= "Half DHCP ";
-	$l_switch_off		= "Stop the DHCP service";
+	$l_DHCP_off_explain	= "No DHCP";
 	$l_static_dhcp_title	= "Static IP addresses reservation";
 	$l_mac_address		= "MAC Address";
 	$l_ip_address		= "IP Address";
 	$l_mac_del		= "Delete from list";
 	$l_add_to_list		= "Add";
-	$l_submit		= "Apply";
+	$l_apply		= "Apply changes";
+}
 if (isset($_POST['choix'])){$choix=$_POST['choix'];} else {$choix="";}
 switch ($choix)
+{
-case 'DHCP_On' :
+case 'DHCP_Full' :
-	exec ("sudo /usr/local/sbin/alcasar-dhcp.sh -on");
+	exec ("sudo /usr/local/sbin/alcasar-dhcp.sh -full");
 	break;
 case 'DHCP_Off' :
 	exec ("sudo /usr/local/sbin/alcasar-dhcp.sh -off");
 	break;
+case 'DHCP_Half' :
+	exec ("sudo /usr/local/sbin/alcasar-dhcp.sh -half");
+	break;
 case 'new_mac' :
 	if ((trim($_POST['add_mac']) != "") and (trim($_POST['add_ip']) != ""))
+		{
 		$tab=file(ETHERS_FILE);
 		$insert="True";
 }else{
 	exit("Erreur d'ouverture du fichier ".ALCASAR_CHILLI);
+}
 fclose($ouvre);
-/****************************************************************
+/***********************************
-*		Lecture du fichier CONF_FILE			*
+*	Read ALCASAR_CONF_FILE     *
-*****************************************************************/
+************************************/
 $ouvre=fopen(CONF_FILE,"r");
 if ($ouvre){
 	while (!feof ($ouvre))
+	{
 		$tampon = fgets($ouvre, 4096);
 	<tr bgcolor="#FFCC66"><td><img src="/images/pix.gif" width="1" height="2"></td></tr>
 </table>
 <table width="100%" border=1 cellspacing=0 cellpadding=0>
 <tr><td valign="middle" align="left">
 <?
-if (strncmp ($conf["DHCP"],"on",2) == 0)
+$dhcp_state=trim($conf["DHCP"]);
- 	{
-	echo "<CENTER><H3>$l_dhcp_on</H3></CENTER>";
+echo "<CENTER><H3>${"l_DHCP_".$dhcp_state}</H3></CENTER>";
-	echo "<FORM action='$_SERVER[PHP_SELF]' method=POST>";
+echo "<FORM action='$_SERVER[PHP_SELF]' method=POST>";
-	echo "<input type=hidden name='choix' value=\"DHCP_Off\">";
+echo "<select name='choix'>";
-	echo "<input type=submit value=\"$l_switch_off\">";
+echo "<option value=\"DHCP_Off\" ";if (!strcmp($dhcp_state,"off")) echo "selected";echo ">$l_DHCP_off";
-	}
-else
-	{
-	echo "<CENTER><H3>$l_dhcp_off</H3></CENTER>";
+echo "<option value=\"DHCP_Half\" ";if (!strcmp($dhcp_state,"half")) echo "selected";echo ">$l_DHCP_half";
- 	echo "<FORM action='$_SERVER[PHP_SELF]' method=POST>";
+echo "<option value=\"DHCP_Full\" ";if (!strcmp($dhcp_state,"full")) echo "selected";echo ">$l_DHCP_full";
+echo "</select>";
-	echo "<input type=hidden name='choix' value=\"DHCP_On\">";
+echo "<input type=submit value='$l_apply'>";
-	echo "<input type=submit value=\"$l_switch_on\">";
+echo "<td align='center'>";
+echo "$l_DHCP_off : $l_DHCP_off_explain<br>$l_DHCP_half : $l_DHCP_half_explain<br>$l_DHCP_full : $l_DHCP_full_explain";
-	}
+echo "</td>";
 echo "</FORM>";
 echo "</td></tr>";
-echo "</TABLE>";
-if (strncmp($conf["DHCP"],"on",2) == 0) require ('network2.php');
+if (strncmp($conf["DHCP"],"full",2) == 0) { require ('network2.php');}
+else { echo "</TABLE>"; }
 ?>
-</BODY>
 </body>
 </html>

Subversion Repositories ALCASAR

(root)/web/acc/admin/network.php – Rev 859 → 861