WebSVN – ALCASAR – Diff – /web/acc/manager/htdocs/autoregistration.php

 <?php
-# $Id: autoregistration.php 2553 2018-05-09 22:04:53Z rexy $
+# $Id: autoregistration.php 2557 2018-06-03 21:06:17Z rexy $
 #Define
 $gammu_wrong_port = "";
 $gammu_puk = "";
 $gammu_simfail = "";
 if (!empty($open_port))
+{
 	$find_key="true";
 	$vendor=exec("udevadm info -n $openned_ports[1] | grep 'MODEL=' | cut -d'=' -f2");
 	$model=exec("udevadm info -n $openned_ports[1] | grep 'MODEL_FROM_DATABASE=' | cut -d'=' -f2");
-	$gammu_smsd_port=exec("sudo $script --port"); // Gammu_smsd listen port
+	$gammu_smsd_port=exec("cat /etc/gammu_smsd_conf| grep port | cut -d ' ' -f3"); // Gammu_smsd listen port
 	while ( list(,$row) = each($openned_ports))
+	{
 		if ( "$row" == "$gammu_smsd_port" ) // is gammu listen on an openned port ?
+		{
 			$listen_on_right_port="true";
 <tr>
 <td colspan=2><h3><center><?php echo $l_status_device ?></center></h3></td>
 </tr>
 <tr>
 <?php
-echo "port = ".$b_port;
 if($find_key=="true")
+{
 	# Start / stop of gammu-smsd (3*7sec) --> to be improve with  systemd unit (see tarball in contrib/init folder)
 	if(isset($_POST["start"])){
 		$gammu_1=exec("sudo $script --start");
 		exec("sudo $script --stop");
 		sleep(8);
 		header('Location: autoregistration.php');
 		exit();
+	}
-	# Set the speed connexion to MODEM
+	# Set the connexion speed to MODEM
-	if(isset($_POST["b_speed"])){
+	if(isset($_POST['b_speed'])){
-		$speed = $_POST["speed"];
-		switch ($speed) {
+		switch ($_POST['speed']) {
 		case "at":
-			exec("sudo $script --replace_speed  ");
+			exec("sudo $script --replace_speed");
 			break;
 		case "9600":
 			exec("sudo $script --replace_speed 9600");
 			break;
 		case "19200":
 			exec("sudo $script --replace_speed 19200");
 			break;
 		case "115200":
 			exec("sudo $script --replace_speed 115200");
 			break;
+		header('Location: autoregistration.php');
+		exit();
+		}
-		//header('Location: autoregistration.php');
-		//exit();
+	}
-	# Set the com port
+	# Set the connexion port to MODEM
-	if(isset($_POST["b_port"])){
+	if(isset($_POST['b_port'])){
+		echo "speed = ".$_POST['port'];
-		$port = $_POST["port"];
+		$port = $_POST['port'];
-		exec("sudo $script --replace_port ".escapeshellarg($port));
+		exec("sudo $script --replace_port $port");
 		header('Location: autoregistration.php');
 		exit();
+	}
 	# Set the SIM phone number
 	if(isset($_POST["b_num_alcasar"])){
+		echo "speed = ".$_POST['num_alcasar'];
 		$num = $_POST["num_alcasar"];
 		$error_num_alcasar = "";
 		if($num !="")
+		{
 			if(preg_match('#^\+#',$num))
+		{
 			$error_pin=$l_error_label_empty;
+		}
+	}
-	# Set the number of tries before ban
+	# Set the session timeout for each new account
-	if(isset($_POST["b_ban_temp"])){
+	if(isset($_POST["b_time_account"])){
-		$nb_ban_temp = $_POST["nb_essais"];
+		$time_account = $_POST["time_account"];
-		$error_nb_essais = "";
+		$error_time_account = "";
-		if($nb_ban_temp !="")
+		if($time_account !="")
+		{
-			if(is_numeric($nb_ban_temp))
+			if(is_numeric($time_account))
+			{
-				exec("sudo $script --replace_try_ban ".escapeshellarg($nb_ban_temp));
+				exec("sudo $script --replace_time_account ".escapeshellarg($time_account));
 				header('Location: autoregistration.php');
 				exit();
+			}
 			else
+			{
-				$error_nb_essais=$l_error_label_num2;
+				$error_time_account=$l_error_label_num2;
+			}
+		}
 		else
+		{
-			$error_nb_essais=$l_error_label_empty;
+			$error_time_account=$l_error_label_empty;
+		}
+	}
-	# Set the session timeout for each new account
+	# Set the number of tries before ban
-	if(isset($_POST["b_time_account"])){
+	if(isset($_POST["b_ban_temp"])){
-		$time_account = $_POST["time_account"];
+		$nb_ban_temp = $_POST["nb_essais"];
-		$error_time_account = "";
+		$error_nb_essais = "";
-		if($time_account !="")
+		if($nb_ban_temp !="")
+		{
-			if(is_numeric($time_account))
+			if(is_numeric($nb_ban_temp))
+			{
-				exec("sudo $script --replace_time_account ".escapeshellarg($time_account));
+				exec("sudo $script --replace_try_ban ".escapeshellarg($nb_ban_temp));
 				header('Location: autoregistration.php');
 				exit();
+			}
 			else
+			{
-				$error_time_account=$l_error_label_num2;
+				$error_nb_essais=$l_error_label_num2;
+			}
+		}
 		else
+		{
-			$error_time_account=$l_error_label_empty;
+			$error_nb_essais=$l_error_label_empty;
+		}
+	}
 	# Set the ban timeout
 	if(isset($_POST["b_time_perm"])){
+{
 	#Nom du fichier de log lorsque gammu est démarré
 	#$file_log = "gammu-smsd.log";
 	#Recuperation de la vitesse de connexion
-	$current_speed = exec("sudo $script --speed");
+	$current_speed = exec("sudo $script --connect");
-	$current_speed=str_replace("at","",$current_speed)." bauds";
-	if ($current_speed == " bauds") {
-		$current_speed = "Auto";
-	}
 	#Recuperation du code PIN actuel
 	$current_pin = exec("sudo $script --pin");
 	#Recuperation du nombre de try avant le ban perm
 	$current_try_ban = exec("sudo $script --try_ban");
 	#Recuperation de la durée d'une session créée
 	$current_time_account = exec("sudo $script --time_account");
-	#Recuperation de la durée du ban perm (après flood)
+	#Recuperation de la durée dun ban perm (après flood)
 	$current_time_perm = exec("sudo $script --time_perm");
 	#Detection neméro de tel
 	$current_num_alcasar = exec("sudo $script --numero_alcasar");
 	$current_last_write = exec("sudo $script --last_writeerror");
 	#Recuperation de la dernière ligne de TIMEOUT
 	$current_last_timeout = exec("sudo $script --last_timeout");
+	# Test si le service est lancé
-	if ($gammu_pid=="") # gammu_smsd is not started
+	if ($gammu_pid=="")
+	{
 		$force_signal = "-";
 		$imei_device = "-";
 		$sms_received = "-";
+		}
 		$gammu_status_on="disabled";
 		$gammu_status_off="";
+	}
-	echo "
-		<form action=\"autoregistration.php\" method=\"post\">
+	echo "<form action=\"autoregistration.php\" method=\"post\">
 		<table border=1>
 		<tr>
 		<td colspan=3><b>$l_conf</b></td>
 		<td><b>$l_conf_actu</b></td>
 		</tr>
 		<tr>
-		<td> $l_speed </td><td>
-			<select name=\"speed\">
-				<option value=\"at\">Auto</option>
-				<option value=\"9600\">9600 Bauds</option>
-				<option value=\"19200\">19200 Bauds</option>
-				<option value=\"115200\">115200 Bauds</option>
-			</select>
-		<td><button type=\"submit\" name=\"b_speed\">$l_edit</button></td>
-		<td><center><font color=\"green\">".$current_speed."</font></center></td>
-		<tr>
 		<td> $l_connect_port </td><td><select name=\"port\">'";
 		reset ($openned_ports);
 		while ( list(,$row) = each($openned_ports))
+		{
-			echo '<option value="'.$row.'">'.$row.'</option>';
+			echo '<option value="'.$row.'"';;if ("$row" == "$gammu_smsd_port") echo " selected";echo '>'.$row.'</option>';
 			echo $row." ";
+		}
 	echo "</select></td>
 		<td><button type=\"submit\" name=\"b_port\" $gammu_status_on>$l_edit</button></td>
 		<td><center><font color=\"green\">$gammu_smsd_port</font></center></td>
 		</tr>
+		<td> $l_speed </td><td>
+			<select name=\"speed\">
+				<option value=\"at\"";if ($current_speed == "at") echo " selected";echo ">Auto</option>
+				<option value=\"9600\"";if ($current_speed == "at9600") echo " selected"; echo ">9600 Bauds</option>
+				<option value=\"19200\"";if ($current_speed == "at19200") echo " selected"; echo ">19200 Bauds</option>
+				<option value=\"115200\"";if ($current_speed == "at115200") echo " selected";echo ">115200 Bauds</option>
+			</select>
+		<td><button type=\"submit\" name=\"b_speed\">$l_edit</button></td>
+		<td><center><font color=\"green\">".str_replace("at","",$current_speed);if ($current_speed == "at"){ echo "Auto"; } else { echo " Bauds";}echo "</font></center></td>
+		<tr>
 		<tr>
 		<td> $l_num_alcasar </td><td><input type=text name='num_alcasar' maxlength=\"20\"></td>
 		<td><button type=\"submit\" name=\"b_num_alcasar\" $gammu_status_on>$l_edit</button></td>
 		<td><center><font color=\"green\">$current_num_alcasar</font></center></td>
 		</tr>
 		$gammu_writeerror
 		</table>
 		</form>";
 	require('/etc/freeradius-web/config.php');
 	if (is_file("../lib/sql/drivers/$config[sql_type]/functions.php"))
 		include_once("../lib/sql/drivers/$config[sql_type]/functions.php");
 	else{
 		echo "<b>Could not include SQL library</b>\n";
 		exit();
+	}
 	$con = mysqli_connect("$config[sql_server]","$config[sql_username]","$config[sql_password]","gammu");
 	if(mysqli_connect_errno())
+	{
 		echo "Fail to connect to $config[sql_type]" . mysqli_connect_error();
+	}
 	# Country table
 ?>
 	<div style="border-radius: 5px; background: #BDBDBD; margin-top: 15px;">
-		 <span class="showhide-but_country"><?php echo "<strong>$l_country_filtering<strong>" ?><img src="/images/down2.gif" width="15" height="15"></span>
+		 <span class="showhide-but_country"><?php echo "<strong>$l_country_filtering</strong>" ?><img src="/images/down2.gif" width="15" height="15"></span>
 		<div class="showhide-div_country">
 		<br />
 			<table width=100% style="background: #BDBDBD;">
 			<tr>
 					<td align="center" width=33%><button type="submit" name="b_country_enable"><?php echo "$l_country_all_ena" ?></button></td>
 				</form>
 			</tr>
 			</table>
 			<div style="border-radius: 5px; background: #D8D8D8; margin: 15px;">
-			<span class="showhide-but_country_plus"><?php echo "<strong>$l_country_filtering_plus<strong>" ?> <img src="/images/down2.gif" width="15" height="15"></span>
+			<span class="showhide-but_country_plus"><?php echo "<strong>$l_country_filtering_plus</strong>" ?> <img src="/images/down2.gif" width="15" height="15"></span>
 				<div class="showhide-div_country_plus">
 				<table id="table_country" class="display">
 					<thead>
 						<tr>
 							<th><b><font color="black">Pays</font></b></th>

Subversion Repositories ALCASAR

(root)/web/acc/manager/htdocs/autoregistration.php @ 2571 – Rev 2553 → 2557