Rev 959 | Rev 974 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log
#!/bin/bash
# $Id: alcasar.sh 967 2012-08-02 20:37:45Z franck $
# alcasar.sh
# ALCASAR - Portail captif d'accès à l'Internet - Copyright (C) [2005] [ALcasar team - Rexy - 3abtux - ...]
# Ce programme est un logiciel libre ; vous pouvez le redistribuer et/ou le modifier au titre des clauses de la Licence Publique Générale GNU,
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
# Voir la Licence Publique Générale GNU pour plus de détails.
# Vous devriez avoir reçu un exemplaire de la Licence Publique Générale GNU avec ce programme ;
# si ce nest pas le cas, consultez : <http://www.gnu.org/licenses/>.
# team@alcasar.net
# by Franck BOUIJOUX, Pascal LEVANT and Richard REY
# This script is distributed under the Gnu General Public License (GPL)
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
# ALCASAR est architecturé autour d'une distribution Linux Mandriva minimaliste et les logiciels libres suivants :
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
# ALCASAR is based on a stripped Mandriva (LSB) with the following open source softwares :
#
# Coovachilli (a fork of chillispot), freeradius, mysql, apache, netfilter, squid, dansguardian, awstat, ntpd, openssl, dnsmasq, havp, libclamav and firewalleyes
# Options :
# -i or --install
# -u or --uninstall
# Functions :
# testing : Tests de connectivité et de téléchargement avant installation
# init : Installation des RPM et des scripts
# network : Paramètrage du réseau
# gestion : Installation de l'interface de gestion
# AC : Initialisation de l'autorité de certification. Création des certificats
# init_db : Création de la base 'radius' sur le serveur MySql
# param_radius : Configuration du serveur d'authentification FreeRadius
# param_web_radius: Configuration de l'interface de gestion de FreeRadius (dialupadmin)
# param_chilli : Configuration du daemon 'coova-chilli' et de la page d'authentification
# param_squid : Configuration du proxy squid en mode 'cache'
# param_dansguardian : Configuration de l'analyseur de contenu DansGuardian
# antivirus : Installation havp + libclamav
# param_awstats : Configuration de l'interface des statistiques de consultation WEB
# dnsmasq : Configuration du serveur de noms et du serveur dhcp de secours
# BL : Configuration de la BlackList
# cron : Mise en place des exports de logs (+ chiffrement)
# post_install : Finalisation environnement ( sécurité, bannières, rotation logs, ...)
DATE=`date '+%d %B %Y - %Hh%M'`
DATE_SHORT=`date '+%d/%m/%Y'`
Lang=`echo $LANG|cut -c 1-2`
# ******* Files parameters - paramètres fichiers *********
DIR_INSTALL=`pwd` # install directory
DIR_CONF="$DIR_INSTALL/conf" # répertoire d'installation contenant les fichiers de configuration
DIR_SCRIPTS="$DIR_INSTALL/scripts" # répertoire d'installation contenant les scripts
DIR_SAVE="/var/Save" # répertoire de sauvegarde (system_backup, user_db_backup, logs)
DIR_WEB="/var/www/html" # répertoire racine APACHE
DIR_DG="/etc/dansguardian" # répertoire de config de DansGuardian
DIR_ACC="$DIR_WEB/acc" # répertoire du centre de gestion 'ALCASAR Control Center'
DIR_DEST_BIN="/usr/local/bin" # répertoire des scripts
DIR_DEST_SBIN="/usr/local/sbin" # répertoire des scripts d'admin
DIR_DEST_ETC="/usr/local/etc" # répertoire des fichiers de conf
CONF_FILE="$DIR_DEST_ETC/alcasar.conf" # fichier de conf d'alcasar
PASSWD_FILE="/root/ALCASAR-passwords.txt" # fichier texte contenant les mots de passe et secrets partagés
# ******* DBMS parameters - paramètres SGBD ********
DB_RADIUS="radius" # nom de la base de données utilisée par le serveur FreeRadius
DB_USER="radius" # nom de l'utilisateur de la base de données
# ******* Network parameters - paramètres réseau *******
HOSTNAME="alcasar" #
DOMAIN="localdomain" # domaine local
EXTIF="eth0" # ETH0 est l'interface connectée à Internet (Box FAI)
INTIF="eth1" # ETH1 est l'interface connectée au réseau local de consultation
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24" # adresse d'ALCASAR (+masque) proposée par défaut sur le réseau de consultation
# ****** Paths - chemin des commandes *******
SED="/bin/sed -i"
# ****************** End of global parameters *********************
license ()
{
if [ $Lang == "fr" ]
then cat $DIR_INSTALL/gpl-3.0.fr.txt | more
else cat $DIR_INSTALL/gpl-3.0.txt | more
fi
echo "Taper une touche pour continuer !"
read a
}
header_install ()
{
clear
echo "-----------------------------------------------------------------------------"
echo " ALCASAR V$VERSION Installation"
echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
echo "-----------------------------------------------------------------------------"
} # End of header_install ()
##################################################################
## Fonction TESTING ##
## - Test de la connectivité Internet ##
##################################################################
testing ()
{
if [ $Lang == "fr" ]
then echo -n "Tests des paramètres réseau : "
else echo -n "Network parameters tests : "
fi
# We test eth0 config files
PUBLIC_IP=`grep IPADDR /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2`
PUBLIC_GATEWAY=`grep GATEWAY /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2`
if [ `echo $PUBLIC_IP|wc -c` -lt 7 ] || [ `echo $PUBLIC_GATEWAY|wc -c` -lt 7 ]
then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Appliquez les changements : 'service network restart'"
else
echo "Failed"
echo "The Internet connected network card ($EXTIF) isn't well configured."
echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Apply the new configuration 'service network restart'"
fi
echo "DEVICE=$EXTIF"
echo "IPADDR="
echo "NETMASK="
echo "GATEWAY="
echo "DNS1="
echo "DNS2="
echo "ONBOOT=yes"
exit 0
fi
echo -n "."
# We test the Ethernet links state
for i in $EXTIF $INTIF
do
/sbin/ip link set $i up
sleep 3
CMD=`/usr/sbin/ethtool $i |grep Link | awk '{print $NF}'`
CMD2=`/sbin/mii-tool $i | grep -i link | awk '{print $NF}'`
if [ $CMD != "yes" ] && [ $CMD2 != "ok" ]
then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Le lien réseau de la carte $i n'est pas actif."
echo "Réglez ce problème puis relancez ce script."
else
echo "Failed"
echo "The link state of $i interface id down."
echo "Resolv this problem, then restart this script."
fi
exit 0
fi
echo -n "."
done
# On teste la présence d'un routeur par défaut (Box FAI)
if [ `ip route list|grep -c ^default` -ne "1" ] ; then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
echo "Réglez ce problème puis relancez ce script."
else
echo "Failed"
echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
echo "Resolv this problem, then restart this script."
fi
exit 0
fi
echo -n "."
# On traite le cas où l'interface configurée lors de l'installation est "eth1" au lieu de "eth0" (mystère sur certaines version de BIOS et de VirtualBox)
if [ `ip route list|grep ^default|grep -c eth1` -eq "1" ] ; then
if [ $Lang == "fr" ]
then echo "La configuration des cartes réseau va être corrigée."
else echo "The Ethernet card configuration will be corrected."
fi
/etc/init.d/network stop
mv -f /etc/sysconfig/network-scripts/ifcfg-eth1 /etc/sysconfig/network-scripts/ifcfg-eth0
$SED "s?eth1?eth0?g" /etc/sysconfig/network-scripts/ifcfg-eth0
/etc/init.d/network start
echo 0 > /proc/sys/net/ipv4/conf/all/log_martians
sleep 2
if [ $Lang == "fr" ]
then echo "Configuration corrigée"
else echo "Configuration updated"
fi
sleep 2
if [ $Lang == "fr" ]
then echo "Vous pouvez relancer ce script."
else echo "You can restart this script."
fi
exit 0
fi
echo -n "."
# On test le lien vers le routeur par default
IP_GW=`ip route list|grep ^default|cut -d" " -f3`
arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $IP_GW|grep response|cut -d" " -f2`
if [ $(expr $arp_reply) -eq 0 ]
then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Le routeur de site ou la Box Internet ($IP_GW) ne répond pas."
echo "Réglez ce problème puis relancez ce script."
else
echo "Failed"
echo "The Internet gateway doesn't answered"
echo "Resolv this problem, then restart this script."
fi
exit 0
fi
echo -n "."
# On teste la connectivité Internet
rm -rf /tmp/con_ok.html
/usr/bin/curl www.google.fr -s -o /tmp/con_ok.html
if [ ! -e /tmp/con_ok.html ]
then
if [ $Lang == "fr" ]
then
echo "La tentative de connexion vers Internet a échoué (google.fr)."
echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
echo "Vérifiez la validité des adresses IP des DNS."
else
echo "The Internet connection try failed (google.fr)."
echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
echo "Verify the DNS IP addresses"
fi
exit 0
fi
rm -rf /tmp/con_ok.html
echo ". : ok"
} # end of testing
##################################################################
## Fonction INIT ##
## - Création du fichier "/root/ALCASAR_parametres.txt" ##
## - Installation et modification des scripts du portail ##
##################################################################
init ()
{
if [ "$mode" != "update" ]
then
# On affecte le nom d'organisme
header_install
ORGANISME=!
PTN='^[a-zA-Z0-9-]*$'
until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez le nom de votre organisme : "
else echo -n "Enter the name of your organism : "
fi
read ORGANISME
if [ "$ORGANISME" == "" ]
then
ORGANISME=!
fi
done
fi
# On crée aléatoirement les mots de passe et les secrets partagés
rm -f $PASSWD_FILE
grubpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8` # mot de passe de protection du menu Grub
echo -n "Password to protect the boot menu (GRUB) : " > $PASSWD_FILE
echo "$grubpwd" >> $PASSWD_FILE
md5_grubpwd=`/usr/bin/md5pass $grubpwd`
$SED "/^password.*/d" /boot/grub/menu.lst
$SED "1ipassword --md5 $md5_grubpwd" /boot/grub/menu.lst
mysqlpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8` # mot de passe de l'administrateur Mysqld
echo -n "Name and password of MYSQL administrator : " >> $PASSWD_FILE
echo "root / $mysqlpwd" >> $PASSWD_FILE
radiuspwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8` # mot de passe de l'utilisateur Mysqld (utilisé par freeradius)
echo -n "Name and password of MYSQL user : " >> $PASSWD_FILE
echo "$DB_USER / $radiuspwd" >> $PASSWD_FILE
secretuam=`cat /dev/urandom | tr -dc [:alnum:] | head -c8` # secret partagé entre intercept.php et coova-chilli
echo -n "Shared secret between the script 'intercept.php' and coova-chilli : " >> $PASSWD_FILE
echo "$secretuam" >> $PASSWD_FILE
secretradius=`cat /dev/urandom | tr -dc [:alnum:] | head -c8` # secret partagé entre coova-chilli et FreeRadius
echo -n "Shared secret between coova-chilli and FreeRadius : " >> $PASSWD_FILE
echo "$secretradius" >> $PASSWD_FILE
chmod 640 $PASSWD_FILE
# On installe les scripts et fichiers de configuration d'ALCASAR
# - dans /usr/local/bin : alcasar-{CA.sh,conf.sh,import-clean.sh,iptables-bypass.sh,iptables.sh,log.sh,watchdog.sh}
cp -f $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown root:root $DIR_DEST_BIN/alcasar* ; chmod 740 $DIR_DEST_BIN/alcasar*
# - dans /usr/local/sbin : alcasar-{bl.sh,bypass.sh,dateLog.sh,havp.sh,logout.sh,mysql.sh,nf.sh,profil.sh,uninstall.sh,version-list.sh,load-balancing.sh}
cp -f $DIR_SCRIPTS/sbin/alcasar* $DIR_DEST_SBIN/. ; chown root:root $DIR_DEST_SBIN/alcasar* ; chmod 740 $DIR_DEST_SBIN/alcasar*
# - des fichiers de conf dans /usr/local/etc : alcasar-{bl-categories-enabled,dns-name,ethers,iptables-local.sh,services}
cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown root:apache $DIR_DEST_ETC/alcasar* ; chmod 660 $DIR_DEST_ETC/alcasar*
$SED "s?^radiussecret.*?radiussecret=\"$secretradius\"?g" $DIR_DEST_SBIN/alcasar-logout.sh
$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_SBIN/alcasar-mysql.sh
$SED "s?^DB_USER=.*?DB_USER=\"$DB_USER\"?g" $DIR_DEST_SBIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
$SED "s?^radiuspwd=.*?radiuspwd=\"$radiuspwd\"?g" $DIR_DEST_SBIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
# generate central conf file
cat <<EOF > $CONF_FILE
##########################################
## ##
## ALCASAR Parameters ##
## ##
##########################################
INSTALL_DATE=$DATE
VERSION=$VERSION
ORGANISM=$ORGANISME
DOMAIN=$DOMAIN
EOF
chmod o-rwx $CONF_FILE
} # End of init ()
##################################################################
## Fonction network ##
## - Définition du plan d'adressage du réseau de consultation ##
## - Nommage DNS du système ##
## - Configuration de l'interface eth1 (réseau de consultation) ##
## - Modification du fichier /etc/hosts ##
## - Configuration du serveur de temps (NTP) ##
## - Renseignement des fichiers hosts.allow et hosts.deny ##
##################################################################
network ()
{
header_install
if [ "$mode" != "update" ]
then
if [ $Lang == "fr" ]
then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
fi
response=0
PTN='^[oOyYnN]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
PRIVATE_IP_MASK="0"
PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
fi
read PRIVATE_IP_MASK
done
else
PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
fi
else
PRIVATE_IP_MASK=`grep PRIVATE_IP conf/etc/alcasar.conf|cut -d"=" -f2`
rm -rf conf/etc/alcasar.conf
fi
# Define LAN side global parameters
hostname $HOSTNAME
PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2` # private network address (ie.: 192.168.182.0)
PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2` # private network mask (ie.: 255.255.255.0)
PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1` # ALCASAR private ip address (consultation LAN side)
PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2` # network prefix (ie. 24)
PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX # ie.: 192.168.182.0/24
classe=$((PRIVATE_PREFIX/8)); classe_sup=`expr $classe + 1`; classe_sup_sup=`expr $classe + 2` # ie.: 2=classe B, 3=classe C
PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`. # compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2` # private network broadcast (ie.: 192.168.182.255)
private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f$classe_sup` # last octet of LAN address
private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f$classe_sup` # last octet of LAN broadcast
PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1` # First network address (ex.: 192.168.182.1)
PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1` # last network address (ex.: 192.168.182.254)
# Define Internet parameters
[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
DNS1=`grep DNS1 /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF|cut -d"=" -f2` # @ip 1er DNS
DNS2=`grep DNS2 /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF|cut -d"=" -f2` # @ip 2ème DNS
DNS1=${DNS1:=208.67.220.220}
DNS2=${DNS2:=208.67.222.222}
PUBLIC_NETMASK=`grep NETMASK /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF|cut -d"=" -f2`
DEFAULT_PUBLIC_NETMASK=`ipcalc -m 192.168.182.2 | cut -d"=" -f2`
PUBLIC_NETMASK=${PUBLIC_NETMASK:=$DEFAULT_PUBLIC_NETMASK}
PUBLIC_PREFIX=`/bin/ipcalc -p 192.168.182.2 $PUBLIC_NETMASK|cut -d"=" -f2`
echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
echo "PUBLIC_MTU=1500" >> $CONF_FILE
echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
echo "DNS1=$DNS1" >> $CONF_FILE
echo "DNS2=$DNS2" >> $CONF_FILE
echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
echo "DHCP=full" >> $CONF_FILE
echo "EXT_DHCP_IP=none" >> $CONF_FILE
echo "RELAY_DHCP_IP=none" >> $CONF_FILE
echo "RELAY_DHCP_PORT=none" >> $CONF_FILE
[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
# config network
cat <<EOF > /etc/sysconfig/network
NETWORKING=yes
HOSTNAME="$HOSTNAME"
FORWARD_IPV4=true
EOF
# config /etc/hosts
[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
cat <<EOF > /etc/hosts
127.0.0.1 localhost
$PRIVATE_IP $HOSTNAME $HOSTNAME.$DOMAIN
EOF
# Config eth0 (Internet)
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=static
IPADDR=$PUBLIC_IP
NETMASK=$PUBLIC_NETMASK
GATEWAY=$PUBLIC_GATEWAY
DNS1=127.0.0.1
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
# Config eth1 (consultation LAN) in normal mode
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
# Config of eth1 in bypass mode (see "alcasar-bypass.sh")
cat <<EOF > /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
IPADDR=$PRIVATE_IP
NETMASK=$PRIVATE_NETMASK
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
# Mise à l'heure du serveur
[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
cat <<EOF > /etc/ntp/step-tickers
0.fr.pool.ntp.org # adapt to your country
1.fr.pool.ntp.org
2.fr.pool.ntp.org
EOF
# Configuration du serveur de temps (sur lui même)
[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
cat <<EOF > /etc/ntp.conf
server 0.fr.pool.ntp.org # adapt to your country
server 1.fr.pool.ntp.org
server 2.fr.pool.ntp.org
server 127.127.1.0 # local clock si NTP internet indisponible ...
fudge 127.127.1.0 stratum 10
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
restrict 127.0.0.1
driftfile /var/lib/ntp/drift
logfile /var/log/ntp.log
EOF
chown -R ntp:ntp /var/lib/ntp
# Renseignement des fichiers hosts.allow et hosts.deny
[ -e /etc/hosts.allow.default ] || cp /etc/hosts.allow /etc/hosts.allow.default
cat <<EOF > /etc/hosts.allow
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
sshd: ALL
ntpd: $PRIVATE_NETWORK_SHORT
EOF
[ -e /etc/host.deny.default ] || cp /etc/hosts.deny /etc/hosts.deny.default
cat <<EOF > /etc/hosts.deny
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
EOF
# Firewall config
$SED "s?^EXTIF=.*?EXTIF=\"$EXTIF\"?g" $DIR_DEST_BIN/alcasar-iptables.sh $DIR_DEST_BIN/alcasar-iptables-bypass.sh
$SED "s?^INTIF=.*?INTIF=\"$INTIF\"?g" $DIR_DEST_BIN/alcasar-iptables.sh $DIR_DEST_BIN/alcasar-iptables-bypass.sh
chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
# create the filter exception file and ip_bloqued file
touch $DIR_DEST_ETC/alcasar-filter-exceptions
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
echo "#$PUBLIC_IP/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
# load conntrack ftp module
[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
echo "ip_conntrack_ftp" >> /etc/modprobe.preload
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
} # End of network ()
##################################################################
## Fonction gestion ##
## - installation du centre de gestion ##
## - configuration du serveur web (Apache) ##
## - définition du 1er comptes de gestion ##
## - sécurisation des accès ##
##################################################################
gestion()
{
[ -d $DIR_WEB ] && rm -rf $DIR_WEB
mkdir $DIR_WEB
# Copie et configuration des fichiers du centre de gestion
cp -rf $DIR_INSTALL/web/* $DIR_WEB/
echo "$VERSION du $DATE" > $DIR_WEB/VERSION
$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
$SED "s?\$hostname =.*?\$hostname = \"$HOSTNAME\";?g" $DIR_WEB/index.php
chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
chown -R apache:apache $DIR_WEB/*
for i in system_backup base logs/firewall logs/httpd logs/squid logs/security;
do
[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
done
chown -R root:apache $DIR_SAVE
# Configuration et sécurisation php
[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
# Configuration et sécurisation Apache
rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
[ -e /etc/httpd/conf/httpd.conf.default ] || cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.default
$SED "s?^#ServerName.*?ServerName $HOSTNAME?g" /etc/httpd/conf/httpd.conf
$SED "s?^Listen.*?Listen $PRIVATE_IP:80?g" /etc/httpd/conf/httpd.conf
$SED "s?^ServerTokens.*?ServerTokens Prod?g" /etc/httpd/conf/httpd.conf
$SED "s?^ServerSignature.*?ServerSignature Off?g" /etc/httpd/conf/httpd.conf
$SED "s?^#ErrorDocument 404 /missing.html.*?ErrorDocument 404 /index.html?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule authn_anon_module.*?#LoadModule authn_anon_module modules/mod_authn_anon.so?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule status_module.*?#LoadModule status_module modules/mod_status.so?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule autoindex_module.*?#LoadModule autoindex_module modules/mod_autoindex.so?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule info_module.*?#LoadModule info_module modules/mod_info.so?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule imagemap_module.*?#LoadModule imagemap_module modules/mod_imagemap.so?g" /etc/httpd/conf/httpd.conf
$SED "s?^LoadModule rewrite_module.*?#LoadModule rewrite_module modules/mod_rewrite.so?g" /etc/httpd/conf/httpd.conf
FIC_MOD_SSL=`find /etc/httpd/modules.d/ -type f -name *mod_ssl.conf`
$SED "s?^Listen.*?Listen $PRIVATE_IP:443?g" $FIC_MOD_SSL # On écoute en SSL que sur INTIF
$SED "s?background-color.*?background-color: #EFEFEF; }?g" /var/www/error/include/top.html
[ -e /var/www/error/include/bottom.html.default ] || mv /var/www/error/include/bottom.html /var/www/error/include/bottom.html.default
cat <<EOF > /var/www/error/include/bottom.html
</body>
</html>
EOF
# Définition du premier compte lié au profil 'admin'
header_install
if [ "$mode" = "install" ]
then
admin_portal=!
PTN='^[a-zA-Z0-9-]*$'
until [[ $(expr $admin_portal : $PTN) -gt 0 ]]
do
header_install
if [ $Lang == "fr" ]
then
echo ""
echo "Définissez un premier compte d'administration du portail :"
echo
echo -n "Nom : "
else
echo ""
echo "Define the first account allow to administrate the portal :"
echo
echo -n "Account : "
fi
read admin_portal
if [ "$admin_portal" == "" ]
then
admin_portal=!
fi
done
# Création du fichier de clés de ce compte dans le profil "admin"
[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
mkdir -p $DIR_DEST_ETC/digest
chmod 755 $DIR_DEST_ETC/digest
until [ -s $DIR_DEST_ETC/digest/key_admin ]
do
/usr/sbin/htdigest -c $DIR_DEST_ETC/digest/key_admin $HOSTNAME $admin_portal
done
$DIR_DEST_SBIN/alcasar-profil.sh --list
else # mise à jour des versions < 2.1
if ([ $MAJ_RUNNING_VERSION -lt 2 ] || ([ $MAJ_RUNNING_VERSION -eq 2 ] && [ $MIN_RUNNING_VERSION -lt 1 ]))
then
if [ $Lang == "fr" ]
then
echo "Cette mise à jour nécessite de redéfinir le premier compte d'administration du portail"
echo
echo -n "Nom : "
else
echo "This update need to redefine the first admin account"
echo
echo -n "Account : "
fi
read admin_portal
[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
mkdir -p $DIR_DEST_ETC/digest
chmod 755 $DIR_DEST_ETC/digest
until [ -s $DIR_DEST_ETC/digest/key_admin ]
do
/usr/sbin/htdigest -c $DIR_DEST_ETC/digest/key_admin $HOSTNAME $admin_portal
done
$DIR_DEST_SBIN/alcasar-profil.sh --list
fi
fi
# synchronisation horaire
ntpd -q -g &
# Sécurisation du centre
rm -f /etc/httpd/conf/webapps.d/*
cat <<EOF > /etc/httpd/conf/webapps.d/alcasar.conf
<Directory $DIR_ACC>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_all
ErrorDocument 404 https://$HOSTNAME/
</Directory>
<Directory $DIR_ACC/admin>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_admin
ErrorDocument 404 https://$HOSTNAME/
</Directory>
<Directory $DIR_ACC/manager>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_manager
ErrorDocument 404 https://$HOSTNAME/
</Directory>
<Directory $DIR_ACC/backup>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_backup
ErrorDocument 404 https://$HOSTNAME/
</Directory>
Alias /save/ "$DIR_SAVE/"
<Directory $DIR_SAVE>
SSLRequireSSL
Options Indexes
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
AuthUserFile $DIR_DEST_ETC/digest/key_backup
ErrorDocument 404 https://$HOSTNAME/
</Directory>
EOF
} # End of gestion ()
##########################################################################################
## Fonction AC() ##
## - Création d'une Autorité de Certification et du certificat serveur pour apache ##
##########################################################################################
AC ()
{
$SED "s?ifcfg-eth.?ifcfg-$INTIF?g" $DIR_DEST_BIN/alcasar-CA.sh
$DIR_DEST_BIN/alcasar-CA.sh
FIC_VIRTUAL_SSL=`find /etc/httpd/conf -type f -name *default_ssl_vhost.conf`
[ -e /etc/httpd/conf/vhosts-ssl.default ] || cp $FIC_VIRTUAL_SSL /etc/httpd/conf/vhosts-ssl.default
$SED "s?localhost.crt?alcasar.crt?g" $FIC_VIRTUAL_SSL
$SED "s?localhost.key?alcasar.key?g" $FIC_VIRTUAL_SSL
$SED "s?^#SSLCertificateChainFile.*?SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt?" $FIC_VIRTUAL_SSL
chown -R root:apache /etc/pki
chmod -R 750 /etc/pki
} # End AC ()
##########################################################################################
## Fonction init_db() ##
## - Initialisation de la base Mysql ##
## - Affectation du mot de passe de l'administrateur (root) ##
## - Suppression des bases et des utilisateurs superflus ##
## - Création de la base 'radius' ##
## - Installation du schéma de cette base ##
## - Import des tables de comptabilité (mtotacct, totacct) et info_usagers (userinfo) ##
## ces table proviennent de 'dialupadmin' (paquetage freeradius-web) ##
##########################################################################################
init_db ()
{
mkdir -p /var/lib/mysql/.tmp
chown mysql:mysql /var/lib/mysql/.tmp
[ -e /etc/my.cnf.rpmnew ] && mv /etc/my.cnf.rpmnew /etc/my.cnf # prend en compte les migrations de MySQL
[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
$SED "s?^#bind-address.*?bind-address=127.0.0.1?g" /etc/my.cnf
/etc/init.d/mysqld start
sleep 4
mysqladmin -u root password $mysqlpwd
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
# Delete exemple databases if exist
$MYSQL="DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;CONNECT mysql;DELETE from user where user='';FLUSH PRIVILEGES;"
# Create 'radius' database
$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES"
# Add an empty radius database structure
mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/radiusd-db-vierge.sql
# modify the start script in order to close accounting connexion when the system is comming down or up
[ -e /etc/init.d/mysqld.default ] || cp /etc/init.d/mysqld /etc/init.d/mysqld.default
$SED "/wait_for_pid created/a echo \"Flush ALCASAR open accounting sessions\"; /usr/local/sbin/alcasar-mysql.sh -acct_stop" /etc/init.d/mysqld
$SED "/'stop')/a echo \"Flush ALCASAR open accounting sessions\"; /usr/local/sbin/alcasar-mysql.sh -acct_stop" /etc/init.d/mysqld
} # End init_db ()
##########################################################################
## Fonction param_radius ##
## - Paramètrage des fichiers de configuration FreeRadius ##
## - Affectation du secret partagé entre coova-chilli et freeradius ##
## - Modification de fichier de conf pour l'accès à Mysql ##
##########################################################################
param_radius ()
{
cp -f $DIR_CONF/radiusd-db-vierge.sql /etc/raddb/
chown -R radius:radius /etc/raddb
[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
# paramètrage radius.conf
$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
# suppression de la fonction proxy
$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf
# suppression du module EAP
$SED "s?^[\t ]*\$INCLUDE eap.conf.*?#\$INCLUDE eap.conf?g" /etc/raddb/radiusd.conf
# écoute sur loopback uniquement (à modifier plus tard pour l'EAP)
$SED "s?^[\t ]*ipaddr =.*?ipaddr = 127.0.0.1?g" /etc/raddb/radiusd.conf
# prise en compte du module SQL et des compteurs SQL
$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql.conf.*?\$INCLUDE sql.conf?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql/mysql/counter.conf?\$INCLUDE sql/mysql/counter.conf?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\$INCLUDE policy.conf?#\$INCLUDE policy.conf?g" /etc/raddb/radiusd.conf
# purge du répertoire des serveurs virtuels et copie du fichier de configuration d'Alcasar
rm -f /etc/raddb/sites-enabled/*
cp $DIR_CONF/alcasar-radius /etc/raddb/sites-available/alcasar
chown radius:apache /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap # droits rw pour apache (module ldap)
chmod 660 /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap
chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/modules
ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
# Inutile dans notre fonctionnement mais les liens sont recréés par un update de radius ... donc forcé en tant que fichier à 'vide'
touch /etc/raddb/sites-enabled/{inner-tunnel,control-socket,default}
# configuration du fichier client.conf (127.0.0.1 suffit mais on laisse le deuxième client pour la future gestion de l'EAP)
[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
cat << EOF > /etc/raddb/clients.conf
client 127.0.0.1 {
secret = $secretradius
shortname = localhost
}
EOF
# modif sql.conf
[ -e /etc/raddb/sql.conf.default ] || cp /etc/raddb/sql.conf /etc/raddb/sql.conf.default
$SED "s?^[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*sqltrace =.*?sqltrace = no?g" /etc/raddb/sql.conf
# modif dialup.conf
[ -e /etc/raddb/sql/mysql/dialup.conf.default ] || cp /etc/raddb/sql/mysql/dialup.conf /etc/raddb/sql/mysql/dialup.conf.default
cp -f $DIR_CONF/dialup.conf /etc/raddb/sql/mysql/dialup.conf
} # End param_radius ()
##########################################################################
## Fonction param_web_radius ##
## - Import, modification et paramètrage de l'interface "dialupadmin" ##
## - Création du lien vers la page de changement de mot de passe ##
##########################################################################
param_web_radius ()
{
# copie de l'interface d'origine dans la structure Alcasar
[ -d /usr/share/freeradius-web ] && cp -rf /usr/share/freeradius-web/* $DIR_ACC/manager/
rm -f $DIR_ACC/manager/index.html $DIR_ACC/manager/readme
rm -f $DIR_ACC/manager/htdocs/about.html $DIR_ACC/manager/htdocs/index.html $DIR_ACC/manager/htdocs/content.html
# copie des fichiers modifiés
cp -rf $DIR_INSTALL/web/acc/manager/* $DIR_ACC/manager/
chown -R apache:apache $DIR_ACC/manager/
# Modification des fichiers de configuration
[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_debug:.*?sql_debug: false?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_usergroup_table: .*?sql_usergroup_table: radusergroup?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_password_attribute:.*?sql_password_attribute: Crypt-Password?g" /etc/freeradius-web/admin.conf
$SED "s?^general_finger_type.*?# general_finger_type: snmp?g" /etc/freeradius-web/admin.conf
$SED "s?^general_stats_use_totacct.*?general_stats_use_totacct: yes?g" /etc/freeradius-web/admin.conf
$SED "s?^general_charset.*?general_charset: utf-8?g" /etc/freeradius-web/admin.conf
[ -e /etc/freeradius-web/config.php.default ] || cp /etc/freeradius-web/config.php /etc/freeradius-web/config.php.default
cp -f $DIR_CONF/freeradiusweb-config.php /etc/freeradius-web/config.php
cat <<EOF > /etc/freeradius-web/naslist.conf
nas1_name: alcasar-$ORGANISME
nas1_model: Portail captif
nas1_ip: $PRIVATE_IP
nas1_port_num: 0
nas1_community: public
EOF
# Modification des attributs visibles lors de la création d'un usager ou d'un groupe
[ -e /etc/freeradius-web/user_edit.attrs.default ] || mv /etc/freeradius-web/user_edit.attrs /etc/freeradius-web/user_edit.attrs.default
cp -f $DIR_CONF/user_edit.attrs /etc/freeradius-web/user_edit.attrs
# Ajout du mappage des attributs chillispot
[ -e /etc/freeradius-web/sql.attrmap.default ] || mv /etc/freeradius-web/sql.attrmap /etc/freeradius-web/sql.attrmap.default
cp -f $DIR_CONF/sql.attrmap /etc/freeradius-web/sql.attrmap
# Modification des attributs visibles sur les pages des statistiques (suppression NAS_IP et NAS_port)
[ -e /etc/freeradius-web/sql.attrs.default ] || cp /etc/freeradius-web/sql.attrs /etc/freeradius-web/user_edit.attrs.default
$SED "s?^NASIPAddress.*?NASIPAddress\tNas IP Address\tno?g" /etc/freeradius-web/sql.attrs
$SED "s?^NASPortId.*?NASPortId\tNas Port\tno?g" /etc/freeradius-web/sql.attrs
chown -R apache:apache /etc/freeradius-web
# Ajout de l'alias vers la page de "changement de mot de passe usager"
cat <<EOF >> /etc/httpd/conf/webapps.d/alcasar.conf
<Directory $DIR_WEB/pass>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
ErrorDocument 404 https://$HOSTNAME
</Directory>
EOF
} # End of param_web_radius ()
##################################################################################
## Fonction param_chilli ##
## - Création du fichier d'initialisation et de configuration de coova-chilli ##
## - Paramètrage de la page d'authentification (intercept.php) ##
##################################################################################
param_chilli ()
{
# init file creation
[ -e /etc/init.d/chilli.default ] || cp /etc/init.d/chilli /etc/init.d/chilli.default
cat <<EOF > /etc/init.d/chilli
#!/bin/sh
#
# chilli CoovaChilli init
#
# chkconfig: 2345 65 35
# description: CoovaChilli
### BEGIN INIT INFO
# Provides: chilli
# Required-Start: network
# Should-Start:
# Required-Stop: network
# Should-Stop:
# Default-Start: 2 3 5
# Default-Stop:
# Description: CoovaChilli access controller
### END INIT INFO
[ -f /usr/sbin/chilli ] || exit 0
. /etc/init.d/functions
CONFIG=/etc/chilli.conf
pidfile=/var/run/chilli.pid
[ -f \$CONFIG ] || {
echo "\$CONFIG Not found"
exit 0
}
RETVAL=0
prog="chilli"
case \$1 in
start)
if [ -f \$pidfile ] ; then
gprintf "chilli is already running"
else
gprintf "Starting \$prog: "
rm -f /var/run/chilli* # cleaning
/sbin/modprobe tun >/dev/null 2>&1
echo 1 > /proc/sys/net/ipv4/ip_forward
[ -e /dev/net/tun ] || {
(cd /dev;
mkdir net;
cd net;
mknod tun c 10 200)
}
ifconfig eth1 0.0.0.0
daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
RETVAL=$?
fi
;;
reload)
killall -HUP chilli
;;
restart)
\$0 stop
sleep 2
\$0 start
;;
status)
status chilli
RETVAL=0
;;
stop)
if [ -f \$pidfile ] ; then
gprintf "Shutting down \$prog: "
killproc /usr/sbin/chilli
RETVAL=\$?
[ \$RETVAL = 0 ] && rm -f $pidfile
else
gprintf "chilli is not running"
fi
;;
*)
echo "Usage: \$0 {start|stop|restart|reload|status}"
exit 1
esac
echo
EOF
# conf file creation
[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
cat <<EOF > /etc/chilli.conf
# coova config for ALCASAR
cmdsocket /var/run/chilli.sock
unixipc chilli.eth1.ipc
pidfile /var/run/chilli.eth1.pid
net $PRIVATE_NETWORK_MASK
dhcpif $INTIF
ethers $DIR_DEST_ETC/alcasar-ethers
#nodynip
#statip
dynip $PRIVATE_NETWORK_MASK
domain localdomain
dns1 $PRIVATE_IP
dns2 $PRIVATE_IP
uamlisten $PRIVATE_IP
uamport 3990
macauth
macpasswd password
locationname $HOSTNAME
radiusserver1 127.0.0.1
radiusserver2 127.0.0.1
radiussecret $secretradius
radiusauthport 1812
radiusacctport 1813
uamserver https://$HOSTNAME/intercept.php
radiusnasid $HOSTNAME
uamsecret $secretuam
uamallowed alcasar
coaport 3799
include $DIR_DEST_ETC/alcasar-uamallowed
include $DIR_DEST_ETC/alcasar-uamdomain
#dhcpgateway
#dhcprelayagent
#dhcpgatewayport
EOF
# création du fichier d'allocation d'adresses IP statiques
touch $DIR_DEST_ETC/alcasar-ethers
# create files for trusted domains and urls
touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
chown root:apache $DIR_DEST_ETC/alcasar-*
chmod 660 $DIR_DEST_ETC/alcasar-*
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
$SED "s?^\$userpassword=1.*?\$userpassword=1;?g" $DIR_WEB/intercept.php
# user 'chilli' creation (in order to run conup/off and up/down scripts
chilli_exist=`grep chilli /etc/passwd|wc -l`
if [ "$chilli_exist" == "1" ]
then
userdel -r chilli 2>/dev/null
fi
groupadd -f chilli
useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
} # End of param_chilli ()
##########################################################
## Fonction param_squid ##
## - Paramètrage du proxy 'squid' en mode 'cache' ##
## - Initialisation de la base de données ##
##########################################################
param_squid ()
{
# paramètrage de Squid (connecté en série derrière Dansguardian)
[ -e /etc/squid/squid.conf.default ] || cp /etc/squid/squid.conf /etc/squid/squid.conf.default
# suppression des références 'localnet', 'icp', 'htcp' et 'always_direct'
$SED "/^acl localnet/d" /etc/squid/squid.conf
$SED "/^icp_access allow localnet/d" /etc/squid/squid.conf
$SED "/^icp_port 3130/d" /etc/squid/squid.conf
$SED "/^http_access allow localnet/d" /etc/squid/squid.conf
$SED "/^htcp_access allow localnet/d" /etc/squid/squid.conf
$SED "/^always_direct allow localnet/d" /etc/squid/squid.conf
# mode 'proxy transparent local'
$SED "s?^http_port.*?http_port 127.0.0.1:3128 transparent?g" /etc/squid/squid.conf
# Configuration du cache local
$SED "s?^#cache_dir.*?cache_dir ufs \/var\/spool\/squid 256 16 256?g" /etc/squid/squid.conf
# emplacement et formatage standard des logs
echo '#logformat common %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st %Ss:%Sh' >> /etc/squid/squid.conf
echo '#logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh' >> /etc/squid/squid.conf
echo "access_log /var/log/squid/access.log" >> /etc/squid/squid.conf
# compatibilité des logs avec awstats
echo "emulate_httpd_log on" >> /etc/squid/squid.conf
echo "half_closed_clients off" >> /etc/squid/squid.conf
echo "server_persistent_connections off" >> /etc/squid/squid.conf
echo "client_persistent_connections on" >> /etc/squid/squid.conf
echo "client_lifetime 1440 minutes" >> /etc/squid/squid.conf
echo "request_timeout 5 minutes" >> /etc/squid/squid.conf
echo "persistent_request_timeout 2 minutes" >> /etc/squid/squid.conf
echo "cache_mem 256 MB" >> /etc/squid/squid.conf
echo "maximum_object_size_in_memory 4096 KB" >> /etc/squid/squid.conf
echo "maximum_object_size 4096 KB" >> /etc/squid/squid.conf
# anonymisation of squid version
echo "via off" >> /etc/squid/squid.conf
# remove the 'X_forwarded' http option
echo "forwarded_for delete" >> /etc/squid/squid.conf
# linked squid output in HAVP input
echo "cache_peer 127.0.0.1 parent 8090 0 no-query default" >> /etc/squid/squid.conf
echo "never_direct allow all" >> /etc/squid/squid.conf
# avoid error messages on network interfaces state changes
$SED "s?^SQUID_AUTO_RELOAD.*?SQUID_AUTO_RELOAD=no?g" /etc/sysconfig/squid
# reduce squid shutdown time (100 to 50)
$SED "s?^SQUID_SHUTDOWN_TIMEOUT.*?SQUID_SHUTDOWN_TIMEOUT=50?g" /etc/sysconfig/squid
# Squid cache init
/usr/sbin/squid -z
} # End of param_squid ()
##################################################################
## Fonction param_dansguardian ##
## - Paramètrage du gestionnaire de contenu Dansguardian ##
##################################################################
param_dansguardian ()
{
mkdir /var/dansguardian
chown dansguardian /var/dansguardian
[ -e $DIR_DG/dansguardian.conf.default ] || cp $DIR_DG/dansguardian.conf $DIR_DG/dansguardian.conf.default
# Le filtrage est désactivé par défaut
$SED "s/^reportinglevel =.*/reportinglevel = -1/g" $DIR_DG/dansguardian.conf
# la page d'interception est en français
$SED "s?^language =.*?language = french?g" $DIR_DG/dansguardian.conf
# on limite l'écoute de Dansguardian côté LAN
$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/dansguardian.conf
# on chaîne Dansguardian au proxy cache SQUID
$SED "s?^proxyport.*?proxyport = 3128?g" $DIR_DG/dansguardian.conf
# on remplace la page d'interception (template)
cp -f $DIR_CONF/template.html /usr/share/dansguardian/languages/ukenglish/
cp -f $DIR_CONF/template-fr.html /usr/share/dansguardian/languages/french/template.html
# on ne loggue que les deny (pour le reste, on a squid)
$SED "s?^loglevel =.*?loglevel = 1?g" $DIR_DG/dansguardian.conf
# lauch of 10 daemons (20 in largest server)
$SED "s?^minchildren =.*?minchildren = 10?g" $DIR_DG/dansguardian.conf
# on désactive par défaut le controle de contenu des pages html
$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/dansguardian.conf
cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
# on désactive par défaut le contrôle d'URL par expressions régulières
cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
# on désactive par défaut le contrôle de téléchargement de fichiers
[ -e $DIR_DG/dansguardianf1.conf.default ] || cp $DIR_DG/dansguardianf1.conf $DIR_DG/dansguardianf1.conf.default
$SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/dansguardianf1.conf
[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
touch $DIR_DG/lists/bannedextensionlist
touch $DIR_DG/lists/bannedmimetypelist
# 'Safesearch' regex actualisation
$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
# empty LAN IP list that won't be WEB filtered
[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
touch $DIR_DG/lists/exceptioniplist
# Keep a copy of URL & domain filter configuration files
[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
} # End of param_dansguardian ()
##################################################################
## Fonction antivirus ##
## - configuration havp + libclamav ##
##################################################################
antivirus ()
{
# création de l'usager 'havp'
havp_exist=`grep havp /etc/passwd|wc -l`
if [ "$havp_exist" == "1" ]
then
userdel -r havp 2>/dev/null
groupdel havp 2>/dev/null
fi
groupadd -f havp
useradd -r -g havp -s /bin/false -c "system user for havp" havp
mkdir -p /var/tmp/havp /var/log/havp
chown -R havp /var/tmp/havp /var/log/havp /var/run/havp
$SED "/$HAVP_BIN -c $HAVP_CONFIG/i chown -R havp:havp \/var\/tmp\/havp" /etc/init.d/havp
# configuration d'HAVP
[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config # datas come on 8090
$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config # we listen only on loopback
$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config # active libclamav AV
$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config # log only when malware matches
$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config # 10 daemons are started simultaneously
$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config # doesn't scan image files
$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
# remplacement du fichier d'initialisation
[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
cp -f $DIR_CONF/havp-init /etc/init.d/havp
# on remplace la page d'interception (template)
cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
# automatisation de la mise à jour de la base antivirale (toutes les 2 heures)
$SED "s?^Checks.*?Checks 12?g" /etc/freshclam.conf
$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
# Virus database update
rm -f /var/lib/clamav/*.cld # in case of old database scheme
[ -e /var/lib/clamav/main.cvd ] || /usr/bin/freshclam
}
##################################################################################
## param_ulogd function ##
## - Ulog config for multi-log files ##
##################################################################################
param_ulogd ()
{
# Three instances of ulogd (three different logfiles)
[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
nl=1
for log_type in tracability ssh ext-access
do
[ -e /var/log/firewall/$log_type.log ] || touch /var/log/firewall/$log_type.log
cp -f /etc/ulogd.conf /etc/ulogd-$log_type.conf
$SED "s?^nlgroup=.*?nlgroup=$nl?g" /etc/ulogd-$log_type.conf
$SED '/OPRINT/,$d' /etc/ulogd-$log_type.conf
cat << EOF >> /etc/ulogd-$log_type.conf
[LOGEMU]
file="/var/log/firewall/$log_type.log"
sync=1
EOF
nl=`expr $nl + 1`
done
chown -R root:apache /var/log/firewall
chmod 750 /var/log/firewall
chmod 640 /var/log/firewall/*
[ -e /etc/init.d/ulogd.default ] || cp /etc/init.d/ulogd /etc/init.d/ulogd.default
cp -f $DIR_CONF/ulogd-init /etc/init.d/ulogd
} # End of param_ulogd ()
##################################################################################
## Fonction param_awstats ##
## - configuration de l'interface des logs de consultation WEB (AWSTAT) ##
##################################################################################
param_awstats()
{
cp -rf /usr/share/awstats/www/ $DIR_ACC/awstats/
chown -R apache:apache $DIR_ACC/awstats
cp /etc/awstats/awstats.conf /etc/awstats/awstats.conf.default
$SED "s?^LogFile=.*?LogFile=\"/var/log/squid/access.log\"?g" /etc/awstats/awstats.conf
$SED "s?^LogFormat=.*?LogFormat=4?g" /etc/awstats/awstats.conf
$SED "s?^SiteDomain=.*?SiteDomain=\"$HOSTNAME\"?g" /etc/awstats/awstats.conf
$SED "s?^HostAliases=.*?HostAliases=\"$PRIVATE_IP\"?g" /etc/awstats/awstats.conf
$SED "s?^DNSLookup=.*?DNSLookup=0?g" /etc/awstats/awstats.conf
$SED "s?^DirData=.*?DirData=\"/var/lib/awstats\"?g" /etc/awstats/awstats.conf
$SED "s?^DirIcons=.*?DirIcons=\"/acc/awstats/icon\"?g" /etc/awstats/awstats.conf
$SED "s?^StyleSheet=.*?StyleSheet=\"/css/style.css\"?g" /etc/awstats/awstats.conf
$SED "s?^BuildReportFormat=.*?BuildReportFormat=xhtml?g" /etc/awstats/awstats.conf
$SED "s?^UseFramesWhenCGI=.*?UseFramesWhenCGI=0?g" /etc/awstats/awstats.conf
$SED "s?^UseFramesWhenCGI=.*?UseFramesWhenCGI=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowSummary=.*?ShowSummary=VPHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowSummary=.*?ShowSummary=VPHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowMonthStats=.*?ShowMonthStats=VPHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowDaysOfMonthStats=.*?ShowDaysOfMonthStats=PHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowDaysOfWeekStats=.*?ShowDaysOfWeekStats=PHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowHoursStats=.*?ShowHoursStats=PHB?g" /etc/awstats/awstats.conf
$SED "s?^ShowDomainsStats=.*?ShowDomainsStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowHostsStats=.*?ShowHostsStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowAuthenticatedUsers=.*?ShowAuthenticatedUsers=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowRobotsStats=.*?ShowRobotsStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowFileTypesStats=.*?ShowFileTypesStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowFileSizesStats=.*?ShowFileSizesStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowOSStats=.*?ShowOSStats=0?g" /etc/awstats/awstats.conf
$SED "s?^ShowScreenSizeStats=.*?ShowScreenSizeStats=0?g" /etc/awstats/awstats.conf
cat <<EOF >> /etc/httpd/conf/webapps.d/alcasar.conf
<Directory $DIR_ACC/awstats>
SSLRequireSSL
Options ExecCGI
AddHandler cgi-script .pl
DirectoryIndex awstats.pl
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName $HOSTNAME
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_admin
ErrorDocument 404 https://$HOSTNAME/
</Directory>
SetEnv PERL5LIB /usr/share/awstats/lib:/usr/share/awstats/plugins
EOF
} # End of param_awstats ()
##########################################################
## Fonction param_dnsmasq ##
##########################################################
param_dnsmasq ()
{
[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
$SED "s?^DHCP_LEASE=.*?DHCP_LEASE=/var/log/dnsmasq/lease.log?g" /etc/sysconfig/dnsmasq # fichier contenant les baux
[ -e /etc/dnsmasq.conf.default ] || cp /etc/dnsmasq.conf /etc/dnsmasq.conf.default
# 1st dnsmasq listen on udp 53 ("dnsmasq - forward"). It's used as dhcp server only if bypass is on.
cat << EOF > /etc/dnsmasq.conf
# Configuration file for "dnsmasq in forward mode"
conf-file=$DIR_DEST_ETC/alcasar-dns-name # zone de definition de noms DNS locaux
listen-address=$PRIVATE_IP
listen-address=127.0.0.1
no-dhcp-interface=$INTIF
bind-interfaces
cache-size=256
domain=$DOMAIN
domain-needed
expand-hosts
bogus-priv
filterwin2k
server=$DNS1
server=$DNS2
# le servive DHCP est configuré mais n'est exploité que pour le "bypass"
dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h
dhcp-option=option:router,$PRIVATE_IP
#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
# Exemple de configuration statique : <@MAC>,<name>,<@IP>,<MASK>,<ttl bail>
#dhcp-host=11:22:33:44:55:66,ssic-test,192.168.182.20,255.255.255.0,45m
EOF
# 2nd dnsmasq listen on udp 54 ("dnsmasq with blackhole")
cat << EOF > /etc/dnsmasq-blackhole.conf
# Configuration file for "dnsmasq with blackhole"
# Inclusion de la blacklist <domains> de Toulouse dans la configuration
conf-dir=$DIR_DEST_ETC/alcasar-dnsfilter-enabled
conf-file=$DIR_DEST_ETC/alcasar-dns-name # zone de definition de noms DNS locaux
listen-address=$PRIVATE_IP
port=54
no-dhcp-interface=$INTIF
bind-interfaces
cache-size=256
domain=$DOMAIN
domain-needed
expand-hosts
bogus-priv
filterwin2k
server=$DNS1
server=$DNS2
EOF
# Init file modification
[ -e /etc/init.d/dnsmasq.default ] || cp /etc/init.d/dnsmasq /etc/init.d/dnsmasq.default
# Start and stop a 2nd process for the "DNS blackhole"
$SED "/daemon/a \$dnsmasq -C /etc/dnsmasq-blackhole.conf \$OPTIONS" /etc/init.d/dnsmasq
$SED "/killproc \$DAEMON_NAME/a killproc \$DAEMON_NAME" /etc/init.d/dnsmasq
# Start after chilli (65) which create tun0
$SED "s?^# chkconfig:.*?# chkconfig: 2345 99 40?g" /etc/init.d/dnsmasq
# Optionnellement on pré-active les logs DNS des clients
[ -e /etc/sysconfig/dnsmasq.default ] || cp /etc/sysconfig/dnsmasq /etc/sysconfig/dnsmasq.default
$SED "s?log-facility?#OPTIONS=\"-q --log-facility=/var/log/dnsmasq/queries.log\"?g" /etc/sysconfig/dnsmasq
# Optionnellement, exemple de configuration avec un A.D.
echo '#OPTIONS="$OPTIONS --server=/your-domain/192.168.182.2"' >> /etc/sysconfig/dnsmasq
} # End dnsmasq
##########################################################
## Fonction BL (BlackList) ##
##########################################################
BL ()
{
# on copie par défaut la BL de toulouse embarqués dans l'archive d'ALCASAR
rm -rf $DIR_DG/lists/blacklists
tar zxf $DIR_CONF/blacklists.tar.gz --directory=$DIR_DG/lists/ > /dev/null 2>&1
# on crée le répertoire ossi (noms de domaine et URLs ajoutés à la BL)
mkdir $DIR_DG/lists/blacklists/ossi
touch $DIR_DG/lists/blacklists/ossi/domains
touch $DIR_DG/lists/blacklists/ossi/urls
# On crée les fichiers vides de sites ou d'URL réhabilités
[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
touch $DIR_DG/lists/exceptionsitelist
touch $DIR_DG/lists/exceptionurllist
# On crée la configuration de base du filtrage de domaine et d'URL pour Dansguardian
cat <<EOF > $DIR_DG/lists/bannedurllist
# Dansguardian filter config for ALCASAR
EOF
cat <<EOF > $DIR_DG/lists/bannedsitelist
# Dansguardian domain filter config for ALCASAR
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
#**
# block all SSL and CONNECT tunnels
**s
# block all SSL and CONNECT tunnels specified only as an IP
*ips
# block all sites specified only by an IP
*ip
EOF
# On ajoute Bing et Youtube à la récriture d'URL liée au contrôle scolaire/parental
cat <<EOF >> $DIR_DG/lists/urlregexplist
# Bing - add 'adlt=strict'
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
# Youtube - add 'edufilter=your_ID'
#"(^http://[0-9a-z]+\.youtube\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&edufilter=ABCD1234567890abcdef"
EOF
chown -R dansguardian:apache $DIR_DG
chmod -R g+rw $DIR_DG
# On crée la structure du DNS-blackhole :
mkdir $DIR_DEST_ETC/{alcasar-dnsfilter-available,alcasar-dnsfilter-enabled}
chown -R 770 $DIR_DEST_ETC/{alcasar-dnsfilter-available,alcasar-dnsfilter-enabled}
chown -R root:apache $DIR_DEST_ETC/{alcasar-dnsfilter-available,alcasar-dnsfilter-enabled}
# On adapte la BL de Toulouse à notre structure
if [ "$mode" != "update" ]; then
$DIR_DEST_SBIN/alcasar-bl.sh --adapt
fi
}
##########################################################
## Fonction cron ##
## - Mise en place des différents fichiers de cron ##
##########################################################
cron ()
{
# Modif du fichier 'crontab' pour passer les cron à minuit au lieu de 04h00
[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
cat <<EOF > /etc/crontab
SHELL=/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/
# run-parts
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
EOF
[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
cat <<EOF >> /etc/anacrontab
7 8 cron.MysqlDump nice /etc/cron.d/alcasar-mysql
7 10 cron.logExport nice /etc/cron.d/alcasar-export_log
7 15 cron.logClean nice /etc/cron.d/alcasar-clean_log
7 20 cron.importClean nice /etc/cron.d/alcasar-clean_import
EOF
cat <<EOF > /etc/cron.d/alcasar-clean_log
# suppression des fichiers de logs de plus d'un an (tous les lundi à 4h30)
30 4 * * 1 root $DIR_DEST_BIN/alcasar-log.sh --clean
EOF
cat <<EOF > /etc/cron.d/alcasar-mysql
# Contrôle, réparation et export de la base des usagers (tous les lundi à 4h45)
45 4 * * 1 root $DIR_DEST_SBIN/alcasar-mysql.sh --dump
# Nettoyage des utilisateurs dont la date d'expiration du compte est supérieure à 7 jours
40 4 * * * root /usr/local/sbin/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
EOF
cat <<EOF > /etc/cron.d/alcasar-export_log
# export des log squid, firewall et apache (tous les lundi à 5h00)
00 5 * * 1 root $DIR_DEST_BIN/alcasar-log.sh --export
EOF
cat <<EOF > /etc/cron.d/alcasar-archive
# Archive des logs et de la base de données (tous les lundi à 5h35)
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
EOF
cat << EOF > /etc/cron.d/awstats
# mise à jour des stats de consultation WEB toutes les 30'
*/30 * * * * root $DIR_ACC/awstats/awstats.pl -config=localhost -update >/dev/null 2>&1
EOF
cat << EOF > /etc/cron.d/alcasar-clean_import
# suppression des fichiers de mots de passe lors d'imports massifs par fichier de plus de 24h
30 * * * * root $DIR_DEST_BIN/alcasar-import-clean.sh
EOF
cat << EOF > /etc/cron.d/alcasar-distrib-updates
# mise à jour automatique de la distribution tous les jours 3h30
30 3 * * * root /usr/sbin/urpmi --auto-update --auto 2>&1
EOF
# mise à jour des stats de connexion (accounting). Scripts provenant de "dialupadmin" (rpm freeradius-web) (cf. wiki.freeradius.org/Dialup_admin).
# on écrase le crontab d'origine installé par le RPM "freeradius-web" (bug remonté à qa.mandriva.com : 46739).
# 'tot_stats' (tout les jours à 01h01) : aggrégat des connexions journalières par usager (renseigne la table 'totacct')
# 'monthly_tot_stat' (tous les jours à 01h05) : aggrégat des connexions mensuelles par usager (renseigne la table 'mtotacct')
# 'truncate_raddact' (tous les 1er du mois à 01h10) : supprime les entrées journalisées plus vieilles que '$back_days' jours (défini ci-après)
# 'clean_radacct' (tous les 1er du mois à 01h15) : ferme les session ouvertes de plus de '$back_days' jours (défini ci-après)
$SED "s?^\$back_days.*?\$back_days = 365;?g" /usr/bin/truncate_radacct
$SED "s?^\$back_days.*?\$back_days = 30;?g" /usr/bin/clean_radacct
rm -f /etc/cron.daily/freeradius-web
rm -f /etc/cron.monthly/freeradius-web
cat << EOF > /etc/cron.d/freeradius-web
1 1 * * * root /usr/bin/tot_stats > /dev/null 2>&1
5 1 * * * root /usr/bin/monthly_tot_stats > /dev/null 2>&1
10 1 1 * * root /usr/bin/truncate_radacct > /dev/null 2>&1
15 1 1 * * root /usr/bin/clean_radacct > /dev/null 2>&1
EOF
cat << EOF > /etc/cron.d/alcasar-watchdog
# activation du "chien de garde" (watchdog) toutes les 3'
*/3 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
EOF
# activation du "chien de garde des services" (watchdog) toutes les 18'
cat << EOF > /etc/cron.d/alcasar-daemon-watchdog
# activation du "chien de garde" (daemon-watchdog) toutes les 18'
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
EOF
# suppression des crons usagers
rm -f /var/spool/cron/*
} # End cron
##################################################################
## Fonction post_install ##
## - Modification des bannières (locales et ssh) et des prompts ##
## - Installation de la structure de chiffrement pour root ##
## - Mise en place du sudoers et de la sécurité sur les fichiers##
## - Mise en place du la rotation des logs ##
## - Configuration dans le cas d'une mise à jour ##
##################################################################
post_install()
{
# adaptation du script "chien de garde" (watchdog)
$SED "s?^EXTIF=.*?EXTIF=\"$EXTIF\"?g" $DIR_DEST_BIN/alcasar-watchdog.sh
$SED "s?^INTIF=.*?INTIF=\"$INTIF\"?g" $DIR_DEST_BIN/alcasar-watchdog.sh
# création de la bannière locale
[ -e /etc/mandriva-release.default ] || cp /etc/mandriva-release /etc/mandriva-release.default
cp -f $DIR_CONF/banner /etc/mandriva-release
echo " V$VERSION" >> /etc/mandriva-release
# création de la bannière SSH
cp /etc/mandriva-release /etc/ssh/alcasar-banner-ssh
chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
# postfix banner anonymisation
$SED "s?^smtpd_banner =.*?smtpd_banner = $myhostname ESMTP?g" /etc/postfix/main.cf
# sshd écoute côté LAN et WAN
$SED "s?^#ListenAddress 0\.0\.0\.0?ListenAddress $PRIVATE_IP?g" /etc/ssh/sshd_config
$SED "/^ListenAddress $PRIVATE_IP/a\ListenAddress $PUBLIC_IP" /etc/ssh/sshd_config
# Put the default value in conf file (sshd, QOS and protocols/dns/ are off)(web antivirus is on)
/sbin/chkconfig --del sshd
echo "SSH=off" >> $CONF_FILE
echo 'Admin_from_IP="0.0.0.0/0.0.0.0"' >> $CONF_FILE
echo "QOS=off" >> $CONF_FILE
echo "LDAP=off" >> $CONF_FILE
echo "LDAP_IP=0.0.0.0/0.0.0.0" >> $CONF_FILE
echo "WEB_ANTIVIRUS=on" >> $CONF_FILE
echo "PROTOCOLS_FILTERING=off" >> $CONF_FILE
echo "DNS_FILTERING=off" >> $CONF_FILE
echo "YOUTUBE_ID=ABCD1234567890abcdef" >> $CONF_FILE
# Coloration des prompts
[ -e /etc/bashrc.default ] || cp /etc/bashrc /etc/bashrc.default
cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
# Droits d'exécution pour utilisateur apache et sysadmin
[ -e /etc/sudoers.default ] || cp /etc/sudoers /etc/sudoers.default
cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
$SED "s?^Host_Alias.*?Host_Alias LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost #réseau de l'organisme?g" /etc/sudoers
# prise en compte de la rotation des logs sur 1 an (concerne mysql, httpd, dansguardian, squid, radiusd, ulogd)
cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
chmod 644 /etc/logrotate.d/*
# rectification sur versions précédentes de la compression des logs
$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
# actualisation des fichiers logs compressés
for dir in firewall squid dansguardian httpd
do
find /var/log/$dir -type f -name *.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] -exec gzip {} \;
done
# export des logs en 'retard' dans /var/Save/logs
/usr/local/bin/alcasar-log.sh --export
# processus lancés par défaut au démarrage
for i in ntpd iptables ulogd dnsmasq squid chilli httpd radiusd netfs mysqld dansguardian havp freshclam
do
/sbin/chkconfig --add $i
done
# On rajoute une tempo pour relancer radius après le redémarrage de mysqld (bug en cours d'analyse)
cat << EOF > /etc/rc.local
#!/bin/sh
#
### BEGIN INIT INFO
# Provides: rc.local
# X-Mandriva-Compat-Mode
# Default-Start: 2 3 4 5
# Short-Description: Local initialization script
# Description: This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
### END INIT INFO
/etc/init.d/mysqld restart
sleep 1
/etc/init.d/radiusd restart
touch /var/lock/subsys/local
EOF
# pour éviter les alertes de dépendance entre service.
$SED "s?^# Required-Start.*?# Required-Start: \$local_fs \$network?g" /etc/init.d/mysqld
$SED "s?^# Required-Stop.*?# Required-Stop: \$local_fs \$network?g" /etc/init.d/mysqld
$SED "s?^# Should-Start.*?# Should-Start: radiusd ldap?g" /etc/init.d/httpd
$SED "s?^# Should-Stop.*?# Should-Stop: radiusd ldap?g" /etc/init.d/httpd
# On affecte le niveau de sécurité du système : type "fileserver"
$SED "s?BASE_LEVEL=.*?BASE_LEVEL=fileserver?g" /etc/security/msec/security.conf
# On supprime la vérification du mode promiscious des interfaces réseaux ( nombreuses alertes sur eth1 dûes à Tun0 )
$SED "s?CHECK_PROMISC=.*?CHECK_PROMISC=no?g" /etc/security/msec/level.fileserver
# On applique les préconisations ANSSI (sysctl + msec quand c'est possible)
# Apply French Security Agency rules (sysctl + msec when possible)
# ignorer les broadcast ICMP. (attaque smurf)
$SED "s?^ACCEPT_BROADCASTED_ICMP_ECHO=.*?ACCEPT_BROADCASTED_ICMP_ECHO=no?g" /etc/security/msec/level.fileserver
sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
# ignorer les erreurs ICMP bogus
$SED "s?^ACCEPT_BOGUS_ERROR_RESPONSES=.*?ACCEPT_BOGUS_ERROR_RESPONSES=no?g" /etc/security/msec/level.fileserver
sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
# désactiver l'envoi et la réponse aux ICMP redirects
sysctl -w net.ipv4.conf.all.accept_redirects=0
accept_redirect=`grep accept_redirect /etc/sysctl.conf|wc -l`
if [ "$accept_redirect" == "0" ]
then
echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.conf
else
$SED "s?accept_redirects.*?accept_redirects = 0?g" /etc/sysctl.conf
fi
sysctl -w net.ipv4.conf.all.send_redirects=0
send_redirect=`grep send_redirect /etc/sysctl.conf|wc -l`
if [ "$send_redirect" == "0" ]
then
echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.conf
else
$SED "s?send_redirects.*?send_redirects = 0?g" /etc/sysctl.conf
fi
# activer les SYN Cookies (attaque syn flood)
sysctl -w net.ipv4.tcp_syncookies=1
tcp_syncookies=`grep tcp_syncookies /etc/sysctl.conf|wc -l`
if [ "$tcp_syncookies" == "0" ]
then
echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.conf
else
$SED "s?tcp_syncookies.*?tcp_syncookies = 1?g" /etc/sysctl.conf
fi
# activer l'antispoofing niveau Noyau
$SED "s?^ENABLE_IP_SPOOFING_PROTECTION.*?ENABLE_IP_SPOOFING_PROTECTION=yes?g" /etc/security/msec/level.fileserver
sysctl -w net.ipv4.conf.all.rp_filter=1
# ignorer le source routing
sysctl -w net.ipv4.conf.all.accept_source_route=0
accept_source_route=`grep accept_source_route /etc/sysctl.conf|wc -l`
if [ "$accept_source_route" == "0" ]
then
echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.conf
else
$SED "s?accept_source_route.*?accept_source_route = 0?g" /etc/sysctl.conf
fi
# réglage du timer de maintien de suivi de session à 1h (3600s) au lieu de 5 semaines
sysctl -w net.netfilter.nf_conntrack_tcp_timeout_established=3600
timeout_established=`grep timeout_established /etc/sysctl.conf|wc -l`
if [ "$timeout_established" == "0" ]
then
echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.conf
else
$SED "s?timeout_established.*?timeout_established = 3600?g" /etc/sysctl.conf
fi
# suppression des log_martians (ALCASAR est souvent entre deux réseaux en adressage privée)
sysctl -w net.ipv4.conf.all.log_martians=0
$SED "s?^ENABLE_LOG_STRANGE_PACKETS=.*?ENABLE_LOG_STRANGE_PACKETS=no?g" /etc/security/msec/level.fileserver
# On supprime la gestion du <CTRL>+<ALT>+<SUPPR> et des Magic SysReq Keys
$SED "s?^ALLOW_REBOOT=.*?ALLOW_REBOOT=no?g" /etc/security/msec/level.fileserver
# On mets en place la sécurité sur les fichiers
# des modif par rapport à radius update
cat <<EOF > /etc/security/msec/perm.local
/var/log/firewall/ root.apache 750
/var/log/firewall/* root.apache 640
/etc/security/msec/perm.local root.root 640
/etc/security/msec/level.local root.root 640
/etc/freeradius-web root.apache 750
/etc/freeradius-web/admin.conf root.apache 640
/etc/freeradius-web/config.php root.apache 640
/etc/raddb/dictionnary root.radius 640
/etc/raddb/ldap.attrmap root.radius 640
/etc/raddb/hints root.radius 640
/etc/raddb/huntgroups root.radius 640
/etc/raddb/attrs.access_reject root.radius 640
/etc/raddb/attrs.accounting_response root.radius 640
/etc/raddb/acct_users root.radius 640
/etc/raddb/preproxy_users root.radius 640
/etc/raddb/modules/ldap radius.apache 660
/etc/raddb/sites-available/alcasar radius.apache 660
/etc/pki/* root.apache 750
EOF
/usr/sbin/msec
# modification /etc/inittab
[ -e /etc/inittab.default ] || cp /etc/inittab /etc/inittab.default
# On ne garde que 3 terminaux
$SED "s?^4.*?#&?g" /etc/inittab
$SED "s?^5.*?#&?g" /etc/inittab
$SED "s?^6.*?#&?g" /etc/inittab
# On limite le temps d'attente de grub (3s) et on change la résolution d'écran
$SED "s?^timeout.*?timeout 3?g" /boot/grub/menu.lst
$SED "s?^kernel.*?& vga=791?g" /boot/grub/menu.lst
# On supprime les services et les utilisateurs inutiles
for svc in alsa sound dm atd bootlogd stop-bootlogd
do
/sbin/chkconfig --del $svc
done
for rm_users in avahi-autoipd avahi icapd
do
user=`cat /etc/passwd|grep $rm_users|cut -d":" -f1`
if [ "$user" == "$rm_users" ]
then
/usr/sbin/userdel -f $rm_users
fi
done
# Load and update the previous conf file
if [ "$mode" = "update" ]
then
$DIR_DEST_BIN/alcasar-conf.sh --load
$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
fi
rm -f /tmp/alcasar-conf*
chown -R root:apache $DIR_DEST_ETC/*
chmod -R 660 $DIR_DEST_ETC/*
chmod ug+x $DIR_DEST_ETC/digest $DIR_DEST_ETC/alcasar-dnsfilter*
cd $DIR_INSTALL
echo ""
echo "#############################################################################"
if [ $Lang == "fr" ]
then
echo "# Fin d'installation d'ALCASAR #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- ALCASAR sera fonctionnel après redémarrage du système"
echo
echo "- Lisez attentivement la documentation d'exploitation"
echo
echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://alcasar"
echo
echo " Appuyez sur 'Entrée' pour continuer"
else
echo "# Enf of ALCASAR install process #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- The system will be rebooted in order to operate ALCASAR"
echo
echo "- Read the exploitation documentation"
echo
echo "- The ALCASAR Control Center (ACC) is at http://alcasar"
echo
echo " Hit 'Enter' to continue"
fi
sleep 2
if [ "$mode" != "update" ]
then
read a
fi
clear
# Apply and save the firewall rules
sh $DIR_DEST_BIN/alcasar-iptables.sh
sleep 2
reboot
} # End post_install ()
#################################
# Boucle principale du script #
#################################
dir_exec=`dirname "$0"`
if [ $dir_exec != "." ]
then
echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
echo "Launch this program from the ALCASAR archive directory"
exit 0
fi
VERSION=`cat $DIR_INSTALL/VERSION`
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
nb_args=1
args="-h"
fi
case $args in
-\? | -h* | --h*)
echo "$usage"
exit 0
;;
-i | --install)
license
header_install
testing
# Test if ALCASAR is already installed
if [ -e $DIR_WEB/VERSION ]
then
actual_version=`cat $DIR_WEB/VERSION`
if [ $Lang == "fr" ]
then echo -n "La version "; echo -n $actual_version ; echo " d'ALCASAR est déjà installée";
else echo -n "ALCASAR Version "; echo -n $actual_version ; echo " is already installed";
fi
response=0
PTN='^[oOnNyY]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous effectuer une mise à jour (O/n)? ";
else echo -n "Do you want to update (Y/n)?";
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
rm -f /tmp/alcasar-conf*
else
RUNNING_VERSION=`cat $DIR_WEB/VERSION|cut -d" " -f1`
MAJ_RUNNING_VERSION=`echo $RUNNING_VERSION|cut -d"." -f1`
MIN_RUNNING_VERSION=`echo $RUNNING_VERSION|cut -d"." -f2|cut -c1`
UPD_RUNNING_VERSION=`echo $RUNNING_VERSION|cut -d"." -f3`
# Create a backup of running version importants files
chmod u+x $DIR_SCRIPTS/alcasar-conf.sh
$DIR_SCRIPTS/alcasar-conf.sh --create
mode="update"
fi
fi
# RPMs install
$DIR_SCRIPTS/alcasar-urpmi.sh
if [ "$?" != "0" ]
then
exit 0
fi
if [ -e $DIR_WEB/VERSION ]
then
# Uninstall the running version
$DIR_SCRIPTS/sbin/alcasar-uninstall.sh
fi
# Test if manual update
if [ -e /tmp/alcasar-conf.tar.gz ] && [ "$mode" != "update" ]
then
header_install
if [ $Lang == "fr" ]
then echo "Le fichier de configuration d'une ancienne version a été trouvé";
else echo "The configuration file of an old version has been found";
fi
response=0
PTN='^[oOnNyY]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous l'utiliser (O/n)? ";
else echo -n "Do you want to use it (Y/n)?";
fi
read response
if [ "$response" = "n" ] || [ "$response" = "N" ]
then rm -f /tmp/alcasar-conf*
fi
done
fi
# Test if update
if [ -e /tmp/alcasar-conf.tar.gz ]
then
if [ $Lang == "fr" ]
then echo "#### Installation avec mise à jour ####";
else echo "#### Installation with update ####";
fi
# Extract the central configuration file
tar -xf /tmp/alcasar-conf.tar.gz conf/etc/alcasar.conf
ORGANISME=`grep ORGANISM conf/etc/alcasar.conf|cut -d"=" -f2`
mode="update"
else
mode="install"
fi
for func in init network gestion AC init_db param_radius param_web_radius param_chilli param_squid param_dansguardian antivirus param_ulogd param_awstats param_dnsmasq BL cron post_install
do
$func
# echo "*** 'debug' : end of function $func ***"; read a
done
;;
-u | --uninstall)
if [ ! -e $DIR_DEST_SBIN/alcasar-uninstall.sh ]
then
if [ $Lang == "fr" ]
then echo "ALCASAR n'est pas installé!";
else echo "ALCASAR isn't installed!";
fi
exit 0
fi
response=0
PTN='^[oOnN]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
else echo -n "Do you want to create the running version configuration file (Y/n)? ";
fi
read response
done
if [ "$reponse" = "o" ] || [ "$reponse" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
then
$DIR_SCRIPT/alcasar-conf.sh --create
else
rm -f /tmp/alcasar-conf*
fi
# Uninstall the running version
$DIR_SCRIPTS/sbin/alcasar-uninstall.sh
;;
*)
echo "Argument inconnu :$1";
echo "Unknown argument :$1";
echo "$usage"
exit 1
;;
esac
# end of script