Rev 1981 | Rev 1991 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log
#!/bin/bash
# $Id: alcasar.sh 1990 2016-07-14 17:34:45Z richard $
# alcasar.sh
# ALCASAR Install script - CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]
# Ce programme est un logiciel libre ; This software is free and open source
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
# Voir la Licence Publique Générale GNU pour plus de détails.
# team@alcasar.net
# by Franck BOUIJOUX, Pascal LEVANT and Richard REY
# This script is distributed under the Gnu General Public License (GPL)
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :
# Coovachilli, freeradius, mariaDB, apache, netfilter, dansguardian, ntpd, openssl, dnsmasq, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump
# Options :
# -i or --install
# -u or --uninstall
# Functions :
# testing : connectivity tests, free space test and mageia version test
# init : Installation of RPM and scripts
# network : Network parameters
# ACC : ALCASAR Control Center installation
# CA : Certification Authority initialization
# time_server : NTPd configuration
# init_db : Initilization of radius database managed with MariaDB
# radius : FreeRadius initialisation
# chilli : coovachilli initialisation (+authentication page)
# dansguardian : DansGuardian filtering HTTP proxy configuration
# antivirus : HAVP + libclamav configuration
# tinyproxy : little proxy for user filtered with "WL + antivirus" and "antivirus"
# ulogd : log system in userland (match NFLOG target of iptables)
# nfsen : : Configuration of Nfsen Netflow grapher
# dnsmasq : Name server configuration
# vnstat : little network stat daemon
# BL : Adaptation of Toulouse University BlackList : split into 3 BL (for Dnsmasq, for dansguardian and for Netfilter)
# cron : Logs export + watchdog + connexion statistics
# fail2ban : Fail2ban IDS installation and configuration
# gammu_smsd : Autoregister addon via SMS (gammu-smsd)
# post_install : Security, log rotation, etc.
DATE=`date '+%d %B %Y - %Hh%M'`
DATE_SHORT=`date '+%d/%m/%Y'`
Lang=`echo $LANG|cut -c 1-2`
mode="install"
# ******* Files parameters - paramètres fichiers *********
DIR_INSTALL=`pwd` # current directory
DIR_CONF="$DIR_INSTALL/conf" # install directory (with conf files)
DIR_SCRIPTS="$DIR_INSTALL/scripts" # install directory (with script files)
DIR_BLACKLIST="$DIR_INSTALL/blacklist" # install directory (with blacklist files)
DIR_SAVE="/var/Save" # backup directory (traceability_log, user_db, security_log)
DIR_WEB="/var/www/html" # directory of APACHE
DIR_DG="/etc/dansguardian" # directory of DansGuardian
DIR_ACC="$DIR_WEB/acc" # directory of the 'ALCASAR Control Center'
DIR_DEST_BIN="/usr/local/bin" # directory of ALCASAR scripts
DIR_DEST_ETC="/usr/local/etc" # directory of ALCASAR conf files
DIR_DEST_SHARE="/usr/local/share" # directory of share files used by ALCASAR (dnsmasq for instance)
CONF_FILE="$DIR_DEST_ETC/alcasar.conf" # central ALCASAR conf file
PASSWD_FILE="/root/ALCASAR-passwords.txt" # text file with the passwords and shared secrets
# ******* DBMS parameters - paramètres SGBD ********
DB_RADIUS="radius" # database name used by FreeRadius server
DB_USER="radius" # user name allows to request the users database
DB_GAMMU="gammu" # database name used by Gammu-smsd
# ******* Network parameters - paramètres réseau *******
HOSTNAME="alcasar" # default hostname
DOMAIN="localdomain" # default local domain
EXTIF=`/usr/sbin/ip route|grep default|head -n1|cut -d" " -f5` # EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
INTIF=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "lo\|$EXTIF\|tun0"|head -n1|cut -d" " -f2|tr -d ":"` # INTIF is connected to the consultation network
MTU="1500"
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24" # Default ALCASAR IP address
# ****** Paths - chemin des commandes *******
SED="/bin/sed -i"
# ****************** End of global parameters *********************
license ()
{
if [ $Lang == "fr" ]
then
cat $DIR_INSTALL/gpl-warning.fr.txt | more
else
cat $DIR_INSTALL/gpl-warning.txt | more
fi
response=0
PTN='^[oOyYnN]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
else echo -n "Do you accept the terms of this license (Y/n)? : "
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
exit 1
fi
}
header_install ()
{
clear
echo "-----------------------------------------------------------------------------"
echo " ALCASAR V$VERSION Installation"
echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
echo "-----------------------------------------------------------------------------"
}
##################################################################
## Function "testing" ##
## - Test of Mageia version ##
## - Test of ALCASAR version (if already installed) ##
## - Test of free space on /var (>10G) ##
## - Test of Internet access ##
##################################################################
testing ()
{
# Test of Mageia version
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
unknown_os=0
old="$IFS"
IFS=","
set $fic
for i in $*
do
if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
then
DISTRIBUTION=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
then
CURRENT_VERSION=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
then
ARCH=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
done
IFS="$old"
# Test if ALCASAR is already installed
if [ -e $CONF_FILE ]
then
current_version=`cat $CONF_FILE | grep VERSION | cut -d"=" -f2`
if [ $Lang == "fr" ]
then echo -n "La version "; echo -n $current_version ; echo " d'ALCASAR est déjà installée";
else echo -n "ALCASAR Version "; echo -n $current_version ; echo " is already installed";
fi
response=0
PTN='^[oOnNyY]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous effectuer une mise à jour (O/n)? ";
else echo -n "Do you want to update (Y/n)?";
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
rm -f /tmp/alcasar-conf*
else
# Retrieve former NICname
EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2` # EXTernal InterFace
INTIF=`grep ^INTIF= $CONF_FILE|cut -d"=" -f2` # INTernal InterFace
# Create the current conf file
$DIR_SCRIPTS/alcasar-conf.sh --create
mode="update"
fi
fi
if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "5" ) ]]
then
if [ -e /tmp/alcasar-conf.tar.gz ] # update
then
echo
if [ $Lang == "fr" ]
then
echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"
echo "2 - Installez Linux-Mageia 5 et ALCASAR (cf. doc d'installation)"
echo "3 - Importez votre base des usagers"
else
echo "The automatic update of ALCASAR can't be performed."
echo "1 - Save your traceability files and the user database"
echo "2 - Install Linux-Mageia 5 & ALCASAR (cf. installation doc)"
echo "3 - Import your users database"
fi
else
if [ $Lang == "fr" ]
then
echo "L'installation d'ALCASAR ne peut pas être réalisée."
else
echo "The installation of ALCASAR can't be performed."
fi
fi
echo
if [ $Lang == "fr" ]
then
echo "Le système d'exploitation doit être remplacé (Mageia5)"
else
echo "The OS must be replaced (Mageia5)"
fi
exit 0
fi
if [ ! -d /var/log/netflow/porttracker ]
then
# Test of free space on /var
free_space=`df -BG --output=avail /var|tail -1|tr -d [:space:]G`
if [ $free_space -lt 10 ]
then
if [ $Lang == "fr" ]
then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
fi
exit 0
fi
fi
if [ $Lang == "fr" ]
then echo -n "Tests des paramètres réseau : "
else echo -n "Network parameters tests : "
fi
# Test of Ethernet links state
DOWN_IF=`/usr/sbin/ip link|grep "NO-CARRIER"|cut -d":" -f2|tr -d " "`
for i in $DOWN_IF
do
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Le lien réseau de la carte $i n'est pas actif."
echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
else
echo "Failed"
echo "The link state of $i interface is down."
echo "Make sure that this network card is connected to a switch or an A.P."
fi
exit 0
done
echo -n "."
# Test EXTIF config files
PUBLIC_IP_MASK=`ip addr show $EXTIF|grep "inet "|cut -d" " -f6`
PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d"/" -f1`
PUBLIC_GATEWAY=`ip route list|grep $EXTIF|grep ^default|cut -d" " -f3`
if [ `echo $PUBLIC_IP|wc -c` -lt 7 ] || [ `echo $PUBLIC_GATEWAY|wc -c` -lt 7 ]
then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Appliquez les changements : 'systemctl restart network'"
else
echo "Failed"
echo "The Internet connected network card ($EXTIF) isn't well configured."
echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Apply the new configuration 'systemctl restart network'"
fi
echo "DEVICE=$EXTIF"
echo "IPADDR="
echo "NETMASK="
echo "GATEWAY="
echo "DNS1="
echo "DNS2="
echo "ONBOOT=yes"
exit 0
fi
echo -n "."
# Test if router is alive (Box FAI)
if [ `ip route list|grep $EXTIF|grep -c ^default` -ne "1" ] ; then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
echo "Réglez ce problème puis relancez ce script."
else
echo "Failed"
echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
echo "Resolv this problem, then restart this script."
fi
exit 0
fi
echo -n "."
# On teste le lien vers le routeur par defaut
arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
if [ $(expr $arp_reply) -eq 0 ]
then
if [ $Lang == "fr" ]
then
echo "Échec"
echo "Le routeur de site ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
echo "Réglez ce problème puis relancez ce script."
else
echo "Failed"
echo "The Internet gateway doesn't answered"
echo "Resolv this problem, then restart this script."
fi
exit 0
fi
echo -n "."
# On teste la connectivité Internet
rm -rf /tmp/con_ok.html
/usr/bin/curl www.google.fr -s -o /tmp/con_ok.html
if [ ! -e /tmp/con_ok.html ]
then
if [ $Lang == "fr" ]
then
echo "La tentative de connexion vers Internet a échoué (google.fr)."
echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
echo "Vérifiez la validité des adresses IP des DNS."
else
echo "The Internet connection try failed (google.fr)."
echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
echo "Verify the DNS IP addresses"
fi
exit 0
fi
rm -rf /tmp/con_ok.html
echo ". : ok"
} # end of testing ()
##################################################################
## Function "init" ##
## - Création du fichier "/root/ALCASAR_parametres.txt" ##
## - Installation et modification des scripts du portail ##
##################################################################
init ()
{
if [ "$mode" != "update" ]
then
# On affecte le nom d'organisme
header_install
ORGANISME=!
PTN='^[a-zA-Z0-9-]*$'
until [[ $(expr $ORGANISME : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez le nom de votre organisme : "
else echo -n "Enter the name of your organism : "
fi
read ORGANISME
if [ "$ORGANISME" == "" ]
then
ORGANISME=!
fi
done
fi
# On crée aléatoirement les mots de passe et les secrets partagés
rm -f $PASSWD_FILE
grubpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
echo -n "Password to protect the GRUB boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
echo "$grubpwd" >> $PASSWD_FILE
md5_grubpwd=`/usr/bin/openssl passwd -1 $grubpwd`
$SED "/^password.*/d" /boot/grub/menu.lst
$SED "1ipassword --md5 $md5_grubpwd" /boot/grub/menu.lst
mysqlpwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
echo -n "Name and password of Mysql/mariadb administrator : " >> $PASSWD_FILE
echo "root / $mysqlpwd" >> $PASSWD_FILE
radiuspwd=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
echo -n "Name and password of Mysql/mariadb user : " >> $PASSWD_FILE
echo "$DB_USER / $radiuspwd" >> $PASSWD_FILE
secretuam=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
echo -n "Shared secret between the script 'intercept.php' and coova-chilli : " >> $PASSWD_FILE
echo "$secretuam" >> $PASSWD_FILE
secretradius=`cat /dev/urandom | tr -dc [:alnum:] | head -c8`
echo -n "Shared secret between coova-chilli and FreeRadius : " >> $PASSWD_FILE
echo "$secretradius" >> $PASSWD_FILE
chmod 640 $PASSWD_FILE
# copy scripts in in /usr/local/bin
cp -f $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown root:root $DIR_DEST_BIN/alcasar* ; chmod 740 $DIR_DEST_BIN/alcasar*
# copy conf files in /usr/local/etc
cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*
$SED "s?^radiussecret.*?radiussecret=\"$secretradius\"?g" $DIR_DEST_BIN/alcasar-logout.sh
$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
$SED "s?^DB_USER=.*?DB_USER=\"$DB_USER\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
$SED "s?^radiuspwd=.*?radiuspwd=\"$radiuspwd\"?g" $DIR_DEST_BIN/alcasar-mysql.sh $DIR_DEST_BIN/alcasar-conf.sh
# generate central conf file
cat <<EOF > $CONF_FILE
##########################################
## ##
## ALCASAR Parameters ##
## ##
##########################################
INSTALL_DATE=$DATE
VERSION=$VERSION
ORGANISM=$ORGANISME
HOSTNAME=$HOSTNAME
DOMAIN=$DOMAIN
EOF
chmod o-rwx $CONF_FILE
} # End of init ()
##################################################################
## Function "network" ##
## - Définition du plan d'adressage du réseau de consultation ##
## - Nommage DNS du système ##
## - Configuration de l'interface INTIF (réseau de consultation)##
## - Modification du fichier /etc/hosts ##
## - Renseignement des fichiers hosts.allow et hosts.deny ##
##################################################################
network ()
{
header_install
if [ "$mode" != "update" ]
then
if [ $Lang == "fr" ]
then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
fi
response=0
PTN='^[oOyYnN]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
PRIVATE_IP_MASK="0"
PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
until [[ $(expr $PRIVATE_IP_MASK : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
fi
read PRIVATE_IP_MASK
done
else
PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
fi
else
PRIVATE_IP_MASK=`grep PRIVATE_IP conf/etc/alcasar.conf|cut -d"=" -f2`
rm -rf conf/etc/alcasar.conf
fi
# Define LAN side global parameters
hostnamectl set-hostname $HOSTNAME.$DOMAIN
PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2` # private network address (ie.: 192.168.182.0)
private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4` # last octet of LAN address
PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2` # private network mask (ie.: 255.255.255.0)
PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2` # network prefix (ie. 24)
PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1` # ALCASAR private ip address (consultation LAN side)
if [ $PRIVATE_IP == $PRIVATE_NETWORK ] # when entering network address instead of ip address
then
PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`
PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
fi
private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4` # last octet of LAN address
PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1` # second network address (ex.: 192.168.182.2)
PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX # ie.: 192.168.182.0/24
classe=$((PRIVATE_PREFIX/8)) # ie.: 2=classe B, 3=classe C
PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`. # compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
PRIVATE_BROADCAST=`/bin/ipcalc -b $PRIVATE_NETWORK_MASK | cut -d"=" -f2` # private network broadcast (ie.: 192.168.182.255)
private_broadcast_ending=`echo $PRIVATE_BROADCAST | cut -d"." -f4` # last octet of LAN broadcast
PRIVATE_FIRST_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1` # First network address (ex.: 192.168.182.1)
PRIVATE_LAST_IP=`echo $PRIVATE_BROADCAST | cut -d"." -f1-3`"."`expr $private_broadcast_ending - 1` # last network address (ex.: 192.168.182.254)
PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'` # MAC address of INTIF
# Define Internet parameters
DNS1=`grep ^nameserver /etc/resolv.conf|awk -F" " '{print $2}'|head -n 1` # 1st DNS server
nb_dns=`grep ^nameserver /etc/resolv.conf|wc -l`
if [ $nb_dns == 2 ]
then
DNS2=`grep ^nameserver /etc/resolv.conf|cut -d" " -f2|tail -n 1` # 2nd DNS server (if exist)
fi
DNS1=${DNS1:=208.67.220.220}
DNS2=${DNS2:=208.67.222.222}
PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
# Wrtie the conf file
echo "EXTIF=$EXTIF" >> $CONF_FILE
echo "INTIF=$INTIF" >> $CONF_FILE
IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2` # IP setting (static or dynamic)
if [ $IP_SETTING == "dhcp" ]
then
echo "PUBLIC_IP=dhcp" >> $CONF_FILE
echo "GW=dhcp" >> $CONF_FILE
else
echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
fi
echo "DNS1=$DNS1" >> $CONF_FILE
echo "DNS2=$DNS2" >> $CONF_FILE
echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
echo "DHCP=on" >> $CONF_FILE
echo "EXT_DHCP_IP=none" >> $CONF_FILE
echo "RELAY_DHCP_IP=none" >> $CONF_FILE
echo "RELAY_DHCP_PORT=none" >> $CONF_FILE
echo "PROTOCOLS_FILTERING=off" >> $CONF_FILE
echo "INT_DNS_DOMAIN=none" >> $CONF_FILE
echo "INT_DNS_IP=none" >> $CONF_FILE
echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
# network default
[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
cat <<EOF > /etc/sysconfig/network
NETWORKING=yes
FORWARD_IPV4=true
EOF
# /etc/hosts config
[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
cat <<EOF > /etc/hosts
127.0.0.1 localhost
$PRIVATE_IP $HOSTNAME.$DOMAIN $HOSTNAME
EOF
# EXTIF (Internet) config
[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
if [ $IP_SETTING == "dhcp" ]
then
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=dhcp
DNS1=127.0.0.1
PEERDNS=no
RESOLV_MODS=yes
ONBOOT=yes
NOZEROCONF=yes
METRIC=10
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
else
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=static
IPADDR=$PUBLIC_IP
NETMASK=$PUBLIC_NETMASK
GATEWAY=$PUBLIC_GATEWAY
DNS1=127.0.0.1
RESOLV_MODS=yes
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
fi
# Config INTIF (consultation LAN) in normal mode
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
# Config of INTIF in bypass mode (see "alcasar-bypass.sh")
cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
IPADDR=$PRIVATE_IP
NETMASK=$PRIVATE_NETMASK
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
# Renseignement des fichiers hosts.allow et hosts.deny
[ -e /etc/hosts.allow.default ] || cp /etc/hosts.allow /etc/hosts.allow.default
cat <<EOF > /etc/hosts.allow
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
sshd: ALL
ntpd: $PRIVATE_NETWORK_SHORT
EOF
[ -e /etc/host.deny.default ] || cp /etc/hosts.deny /etc/hosts.deny.default
cat <<EOF > /etc/hosts.deny
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
EOF
chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
# load conntrack ftp module
[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
echo "nf_conntrack_ftp" >> /etc/modprobe.preload
# load ipt_NETFLOW module
echo "ipt_NETFLOW" >> /etc/modprobe.preload
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
#
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
} # End of network ()
##################################################################
## Function "ACC" ##
## - installation of then ALCASAR Control Center (ACC) ) ##
## - configuration of the web server (Apache) ##
## - creation of the first ACC admin account ##
## - secure the access ##
##################################################################
ACC ()
{
[ -d $DIR_WEB ] && rm -rf $DIR_WEB
mkdir $DIR_WEB
# Copy & adapt ACC files
cp -rf $DIR_INSTALL/web/* $DIR_WEB/
echo "$VERSION" > $DIR_WEB/VERSION
$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/phpsysinfo/includes/xml/portail.php
chmod 640 $DIR_ACC/phpsysinfo/includes/xml/portail.php
chown -R apache:apache $DIR_WEB/*
# copy & adapt "freeradius-web" files
cp -rf $DIR_CONF/freeradius-web/ /etc/
[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
cat <<EOF > /etc/freeradius-web/naslist.conf
nas1_name: alcasar-$ORGANISME
nas1_model: Network Access Controler
nas1_ip: $PRIVATE_IP
nas1_port_num: 0
nas1_community: public
EOF
chown -R apache:apache /etc/freeradius-web/
# create the log & backup structure :
# - base = users database
# - archive = tarball of "base + http firewall + netflow"
# - security = watchdog log
for i in base archive security;
do
[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
done
chown -R root:apache $DIR_SAVE
# Configuring & securing php
[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
# Configuring & sécuring Apache
rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
[ -e /etc/httpd/conf/httpd.conf.default ] || cp /etc/httpd/conf/httpd.conf /etc/httpd/conf/httpd.conf.default
$SED "s?^#ServerName.*?ServerName $HOSTNAME.$DOMAIN?g" /etc/httpd/conf/httpd.conf
$SED "s?^Listen.*?Listen $PRIVATE_IP:80?g" /etc/httpd/conf/httpd.conf
$SED "s?Options Indexes.*?Options -Indexes?g" /etc/httpd/conf/httpd.conf
echo "ServerTokens Prod" >> /etc/httpd/conf/httpd.conf
echo "ServerSignature Off" >> /etc/httpd/conf/httpd.conf
[ -e /etc/httpd/conf/modules.d/00_base.conf.default ] || cp /etc/httpd/conf/modules.d/00_base.conf /etc/httpd/conf/modules.d/00_base.conf.default
$SED "s?^LoadModule authn_anon_module.*?#LoadModule authn_anon_module modules/mod_authn_anon.so?g" /etc/httpd/conf/modules.d/00_base.conf
$SED "s?^LoadModule status_module.*?#LoadModule status_module modules/mod_status.so?g" /etc/httpd/conf/modules.d/00_base.conf
$SED "s?^LoadModule info_module.*?#LoadModule info_module modules/mod_info.so?g" /etc/httpd/conf/modules.d/00_base.conf
$SED "s?^LoadModule imagemap_module.*?#LoadModule imagemap_module modules/mod_imagemap.so?g" /etc/httpd/conf/modules.d/00_base.conf
$SED "s?^LoadModule rewrite_module.*?#LoadModule rewrite_module modules/mod_rewrite.so?g" /etc/httpd/conf/modules.d/00_base.conf
$SED "s?^LoadModule speling_module.*?#LoadModule speling_module modules/mod_speling.so?g" /etc/httpd/conf/modules.d/00_base.conf
[ -e /etc/httpd/conf/conf.d/ssl.conf.default ] || cp /etc/httpd/conf/conf.d/ssl.conf /etc/httpd/conf/conf.d/ssl.conf.default
echo "Listen $PRIVATE_IP:443" > /etc/httpd/conf/conf.d/ssl.conf # Listen only on INTIF
echo "SSLProtocol all -SSLv2 -SSLv3" >> /etc/httpd/conf/conf.d/ssl.conf # exclude vulnerable protocols
echo "SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS" >> /etc/httpd/conf/conf.d/ssl.conf # Define the cipher suite
echo "SSLHonorCipherOrder on" >> /etc/httpd/conf/conf.d/ssl.conf # The Browser must respect the order of the cipher suite
echo "SSLPassPhraseDialog builtin" >> /etc/httpd/conf/conf.d/ssl.conf # in case of passphrase the dialog will be perform on stdin
echo "SSLSessionCache \"shmcb:/run/httpd/ssl_scache(512000)\"" >> /etc/httpd/conf/conf.d/ssl.conf # default cache size
echo "SSLSessionCacheTimeout 300" >> /etc/httpd/conf/conf.d/ssl.conf # default cache time in seconds
# Error page management
[ -e /etc/httpd/conf/conf.d/multilang-errordoc.conf.default ] || cp /etc/httpd/conf/conf.d/multilang-errordoc.conf /etc/httpd/conf/conf.d/multilang-errordoc.conf.default
cat <<EOF > /etc/httpd/conf/conf.d/multilang-errordoc.conf
Alias /error/ "/var/www/html/"
<Directory "/usr/share/httpd/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Require all granted
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/error.php?error=400
ErrorDocument 401 /error/error.php?error=401
ErrorDocument 403 /error/error.php?error=403
ErrorDocument 404 /error/error.php?error=404
ErrorDocument 405 /error/error.php?error=405
ErrorDocument 408 /error/error.php?error=408
ErrorDocument 410 /error/error.php?error=410
ErrorDocument 411 /error/error.php?error=411
ErrorDocument 412 /error/error.php?error=412
ErrorDocument 413 /error/error.php?error=413
ErrorDocument 414 /error/error.php?error=414
ErrorDocument 415 /error/error.php?error=415
ErrorDocument 500 /error/error.php?error=500
ErrorDocument 501 /error/error.php?error=501
ErrorDocument 502 /error/error.php?error=502
ErrorDocument 503 /error/error.php?error=503
ErrorDocument 506 /error/error.php?error=506
EOF
[ -e /usr/share/httpd/error/include/top.html.default ] || cp /usr/share/httpd/error/include/top.html /usr/share/httpd/error/include/top.html.default
$SED "s?background-color.*?background-color: #EFEFEF; }?g" /usr/share/httpd/error/include/top.html
[ -e /usr/share/httpd/error/include/bottom.html.default ] || cp /usr/share/httpd/error/include/bottom.html /usr/share/httpd/error/include/bottom.html.default
cat <<EOF > /usr/share/httpd/error/include/bottom.html
</body>
</html>
EOF
# Définition du premier compte lié au profil 'admin'
if [ "$mode" = "install" ]
then
header_install
admin_portal=!
PTN='^[a-zA-Z0-9-]*$'
until [[ $(expr $admin_portal : $PTN) -gt 0 ]]
do
header_install
if [ $Lang == "fr" ]
then
echo ""
echo "Définissez un premier compte d'administration du portail :"
echo
echo -n "Nom : "
else
echo ""
echo "Define the first account allow to administrate the portal :"
echo
echo -n "Account : "
fi
read admin_portal
if [ "$admin_portal" == "" ]
then
admin_portal=!
fi
done
# Creation of keys file for the admin account ("admin")
[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
mkdir -p $DIR_DEST_ETC/digest
chmod 755 $DIR_DEST_ETC/digest
until [ -s $DIR_DEST_ETC/digest/key_admin ]
do
/usr/bin/htdigest -c $DIR_DEST_ETC/digest/key_admin "ALCASAR Control Center (ACC)" $admin_portal
done
$DIR_DEST_BIN/alcasar-profil.sh --list
fi
# ACC partitioning
rm -f /etc/httpd/conf/webapps.d/alcasar*
cat <<EOF > /etc/httpd/conf/webapps.d/alcasar.conf
<Directory $DIR_ACC>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName "ALCASAR Control Center (ACC)"
AuthDigestDomain $HOSTNAME.$DOMAIN
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_all
ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
</Directory>
<Directory $DIR_ACC/admin>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName "ALCASAR Control Center (ACC)"
AuthDigestDomain $HOSTNAME.$DOMAIN
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_admin
ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
</Directory>
<Directory $DIR_ACC/manager>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName "ALCASAR Control Center (ACC)"
AuthDigestDomain $HOSTNAME.$DOMAIN
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_manager
ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
</Directory>
<Directory $DIR_ACC/backup>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName "ALCASAR Control Center (ACC)"
AuthDigestDomain $HOSTNAME.$DOMAIN
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
AuthUserFile $DIR_DEST_ETC/digest/key_backup
ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
</Directory>
Alias /save/ "$DIR_SAVE/"
<Directory $DIR_SAVE>
SSLRequireSSL
Options Indexes
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
require valid-user
AuthType digest
AuthName "ALCASAR Control Center (ACC)"
AuthDigestDomain $HOSTNAME.$DOMAIN
AuthUserFile $DIR_DEST_ETC/digest/key_backup
ErrorDocument 404 https://$HOSTNAME.$DOMAIN/
</Directory>
<Directory $DIR_WEB/pass>
SSLRequireSSL
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.1
Allow from $PRIVATE_NETWORK_MASK
ErrorDocument 404 https://$HOSTNAME.$DOMAIN
</Directory>
EOF
# Launch after coova (in order to wait tun0 to be up)
$SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/httpd.service
} # End of ACC ()
##########################################################################
## Fonction "CA" ##
## - Creating the CA and the server certificate (apache) ##
##########################################################################
CA ()
{
$DIR_DEST_BIN/alcasar-CA.sh
FIC_VIRTUAL_SSL=`find /etc/httpd/conf -type f -name *default_ssl_vhost.conf`
[ -e /etc/httpd/conf/vhosts-ssl.default ] || cp $FIC_VIRTUAL_SSL /etc/httpd/conf/vhosts-ssl.default
cat <<EOF > $FIC_VIRTUAL_SSL
# default SSL virtual host, used for all HTTPS requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost _default_:443>
# general configuration
ServerAdmin root@localhost
ServerName $HOSTNAME.$DOMAIN
# SSL configuration
SSLEngine on
SSLCertificateFile /etc/pki/tls/certs/alcasar.crt
SSLCertificateKeyFile /etc/pki/tls/private/alcasar.key
SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
CustomLog logs/ssl_request_log \
"%t %{SSL_PROTOCOL}x %{SSL_CIPHER}x [%h] \"%r\" %b"
ErrorLog logs/ssl_error_log
ErrorLogFormat "[%t] [%m:%l] [client %a] %M"
</VirtualHost>
EOF
chown -R root:apache /etc/pki
chmod -R 750 /etc/pki
} # End of CA ()
##################################################################
## Function "time_server" ##
## - Configuring NTP server ##
##################################################################
time_server ()
{
# Set the Internet time server
[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
cat <<EOF > /etc/ntp/step-tickers
0.fr.pool.ntp.org # adapt to your country
1.fr.pool.ntp.org
2.fr.pool.ntp.org
EOF
[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
cat <<EOF > /etc/ntp.conf
server 0.fr.pool.ntp.org # adapt to your country
server 1.fr.pool.ntp.org
server 2.fr.pool.ntp.org
server 127.127.1.0 # local clock si NTP internet indisponible ...
fudge 127.127.1.0 stratum 10
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
restrict 127.0.0.1
driftfile /var/lib/ntp/drift
logfile /var/log/ntp.log
disable monitor
EOF
chown -R ntp:ntp /var/lib/ntp
# Synchronize now
ntpd -q -g &
} # End of time_server ()
##########################################################################################
## Fonction "init_db" ##
## - Initialisation de la base Mysql ##
## - Affectation du mot de passe de l'administrateur (root) ##
## - Suppression des bases et des utilisateurs superflus ##
## - Création de la base 'radius' ##
## - Installation du schéma de cette base ##
## - Import des tables de comptabilité (mtotacct, totacct) et info_usagers (userinfo) ##
## ces table proviennent de 'dialupadmin' (paquetage freeradius-web) ##
##########################################################################################
init_db ()
{
if [ `systemctl is-active mysqld` == "active" ]
then
systemctl stop mysqld
fi
rm -rf /var/lib/mysql # to be sure that there is no former installation
/usr/sbin/mysql-prepare-db-dir
[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
$SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
$SED "s?^port.*?#&?g" /etc/my.cnf # we use unix socket only
$SED "s?^;collation_server =.*?collation_server = utf8_unicode_ci?g" /etc/my.cnf
$SED "s?^;character_set_server =.*?character_set_server = utf8?g" /etc/my.cnf # accentuated user names are allowed
$SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/feedback.cnf # remove the feedback plugin (ALCASAR doesn't report anything !)
/usr/bin/systemctl start mysqld.service
nb_round=1
while [ ! -S /var/lib/mysql/mysql.sock ] && [ $nb_round -lt 10 ] # we wait until mariadb is on
do
nb_round=`expr $nb_round + 1`
sleep 2
done
if [ ! -S /var/lib/mysql/mysql.sock ]
then
echo "Problème : la base données 'MariaDB' ne s'est pas lancée !"
exit
fi
mysqladmin -u root password $mysqlpwd
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
# Secure the server
$MYSQL="DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
$MYSQL="CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;"
# Create 'radius' database
$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
# Add an empty radius database structure
mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
# modify the start script in order to close accounting connexion when the system is comming down or up
[ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
$SED "/ExecStartPost=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
$SED "/ExecStartPost=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
/usr/bin/systemctl daemon-reload
} # End of init_db ()
##########################################################################
## Fonction "radius" ##
## - Paramètrage des fichiers de configuration FreeRadius ##
## - Affectation du secret partagé entre coova-chilli et freeradius ##
## - Modification de fichier de conf pour l'accès à Mysql ##
##########################################################################
radius ()
{
cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
chown -R radius:radius /etc/raddb
[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
# Set radius.conf parameters
$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
# remove the proxy function
$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf
# remove EAP module
$SED "s?^[\t ]*\$INCLUDE eap.conf.*?#\$INCLUDE eap.conf?g" /etc/raddb/radiusd.conf
# listen on loopback (should be modified later if EAP enabled)
$SED "s?^[\t ]*ipaddr =.*?ipaddr = 127.0.0.1?g" /etc/raddb/radiusd.conf
# enable the SQL module (and SQL counter)
$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql.conf.*?\$INCLUDE sql.conf?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*#[\t ]*\$INCLUDE sql/mysql/counter.conf?\$INCLUDE sql/mysql/counter.conf?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\$INCLUDE policy.conf?#\$INCLUDE policy.conf?g" /etc/raddb/radiusd.conf
# only include modules for ALCASAR needs
$SED "s?^[\t ]*\$INCLUDE \${confdir}/modules/.*?\t#\$INCLUDE \${confdir}/modules/\n\t# we only include modules for ALCASAR needs\n\t\$INCLUDE \${confdir}/modules/attr_filter\n\t\$INCLUDE \${confdir}/modules/expiration\n\t\$INCLUDE \${confdir}/modules/logintime\n\t\$INCLUDE \${confdir}/modules/ldap\n\t\$INCLUDE \${confdir}/modules/pap?g" /etc/raddb/radiusd.conf
$SED "s/^[\t ]exec$/\#\texec/g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*expr.*?\#\texpr?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\# daily.*?\#\tdaily\n\tsql?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*logintime.*?\tlogintime\n\tnoresetcounter\n\tdailycounter\n\tmonthlycounter\n\tattr_filter.access_reject\n\tattr_filter.accounting_response\n\tpap?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*\$INCLUDE sites-enabled/.*?\#\$INCLUDE sites-enabled/\n\#\tenable only alcasar virtual server\n\$INCLUDE sites-enabled/alcasar?g" /etc/raddb/radiusd.conf
# remvove virtual server and copy our conf file
rm -f /etc/raddb/sites-enabled/*
cp $DIR_CONF/radius/alcasar-radius /etc/raddb/sites-available/alcasar
chown radius:apache /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap # droits rw pour apache (module ldap)
chmod 660 /etc/raddb/sites-available/alcasar /etc/raddb/modules/ldap
chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/modules
ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
# Inutile dans notre fonctionnement mais les liens sont recréés par un update de radius ... donc forcé en tant que fichier à 'vide'
touch /etc/raddb/sites-enabled/{inner-tunnel,control-socket,default}
# client.conf configuration (127.0.0.1 suffit mais on laisse le deuxième client pour la future gestion de l'EAP)
[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
cat << EOF > /etc/raddb/clients.conf
client 127.0.0.1 {
secret = $secretradius
shortname = localhost
}
EOF
# sql.conf modification
[ -e /etc/raddb/sql.conf.default ] || cp /etc/raddb/sql.conf /etc/raddb/sql.conf.default
$SED "s?^[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/sql.conf
$SED "s?^[\t ]*sqltrace =.*?sqltrace = no?g" /etc/raddb/sql.conf
# dialup.conf modification (case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.)
[ -e /etc/raddb/sql/mysql/dialup.conf.default ] || cp /etc/raddb/sql/mysql/dialup.conf /etc/raddb/sql/mysql/dialup.conf.default
cp -f $DIR_CONF/radius/dialup.conf /etc/raddb/sql/mysql/dialup.conf
# counter.conf modification (change the Max-All-Session-Time counter)
[ -e /etc/raddb/sql/mysql/counter.conf.default ] || cp /etc/raddb/sql/mysql/counter.conf /etc/raddb/sql/mysql/counter.conf.default
cp -f $DIR_CONF/radius/counter.conf /etc/raddb/sql/mysql/counter.conf
chown -R radius:radius /etc/raddb/sql/mysql/*
# make certain that mysql is up before radius start
[ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
$SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
/usr/bin/systemctl daemon-reload
} # End radius ()
##################################################################################
## Fonction "chilli" ##
## - Création du fichier d'initialisation et de configuration de coova-chilli ##
## - Paramètrage de la page d'authentification (intercept.php) ##
##################################################################################
chilli ()
{
# chilli unit for systemd
cat << EOF > /lib/systemd/system/chilli.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
[Unit]
Description=chilli is a captive portal daemon
After=network.target
[Service]
Type=forking
ExecStart=/usr/libexec/chilli start
ExecStop=/usr/libexec/chilli stop
ExecReload=/usr/libexec/chilli reload
PIDFile=/var/run/chilli.pid
[Install]
WantedBy=multi-user.target
EOF
# init file creation
[ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
cat <<EOF > /etc/init.d/chilli
#!/bin/sh
#
# chilli CoovaChilli init
#
# chkconfig: 2345 65 35
# description: CoovaChilli
### BEGIN INIT INFO
# Provides: chilli
# Required-Start: network
# Should-Start:
# Required-Stop: network
# Should-Stop:
# Default-Start: 2 3 5
# Default-Stop:
# Description: CoovaChilli access controller
### END INIT INFO
[ -f /usr/sbin/chilli ] || exit 0
. /etc/init.d/functions
CONFIG=/etc/chilli.conf
pidfile=/var/run/chilli.pid
[ -f \$CONFIG ] || {
echo "\$CONFIG Not found"
exit 0
}
RETVAL=0
prog="chilli"
case \$1 in
start)
if [ -f \$pidfile ] ; then
gprintf "chilli is already running"
else
gprintf "Starting \$prog: "
rm -f /var/run/chilli* # cleaning
/usr/sbin/modprobe tun >/dev/null 2>&1
echo 1 > /proc/sys/net/ipv4/ip_forward
[ -e /dev/net/tun ] || {
(cd /dev;
mkdir net;
cd net;
mknod tun c 10 200)
}
ifconfig $INTIF 0.0.0.0
/usr/sbin/ethtool -K $INTIF gro off
daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
RETVAL=$?
fi
;;
reload)
killall -HUP chilli
;;
restart)
\$0 stop
sleep 2
\$0 start
;;
status)
status chilli
RETVAL=0
;;
stop)
if [ -f \$pidfile ] ; then
gprintf "Shutting down \$prog: "
killproc /usr/sbin/chilli
RETVAL=\$?
[ \$RETVAL = 0 ] && rm -f $pidfile
else
gprintf "chilli is not running"
fi
;;
*)
echo "Usage: \$0 {start|stop|restart|reload|status}"
exit 1
esac
echo
EOF
chmod a+x /etc/init.d/chilli
ln -s /etc/init.d/chilli /usr/libexec/chilli
# conf file creation
[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
cat <<EOF > /etc/chilli.conf
# coova config for ALCASAR
cmdsocket /var/run/chilli.sock
unixipc chilli.$INTIF.ipc
pidfile /var/run/chilli.pid
net $PRIVATE_NETWORK_MASK
dhcpif $INTIF
ethers $DIR_DEST_ETC/alcasar-ethers
#nodynip
#statip
dynip $PRIVATE_NETWORK_MASK
domain $DOMAIN
dns1 $PRIVATE_IP
dns2 $PRIVATE_IP
uamlisten $PRIVATE_IP
uamport 3990
macauth
macpasswd password
strictmacauth
locationname $HOSTNAME.$DOMAIN
radiusserver1 127.0.0.1
radiusserver2 127.0.0.1
radiussecret $secretradius
radiusauthport 1812
radiusacctport 1813
uamserver https://$HOSTNAME.$DOMAIN/intercept.php
radiusnasid $HOSTNAME.$DOMAIN
uamsecret $secretuam
uamallowed $HOSTNAME,$HOSTNAME.$DOMAIN
coaport 3799
conup $DIR_DEST_BIN/alcasar-conup.sh
condown $DIR_DEST_BIN/alcasar-condown.sh
include $DIR_DEST_ETC/alcasar-uamallowed
include $DIR_DEST_ETC/alcasar-uamdomain
#dhcpgateway none
#dhcprelayagent none
#dhcpgatewayport none
EOF
# create file for DHCP static ip. Reserve the second IP address for INTIF (the first one is for tun0)
echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
# create files for trusted domains and urls
touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
chown root:apache $DIR_DEST_ETC/alcasar-*
chmod 660 $DIR_DEST_ETC/alcasar-*
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
$SED "s?^\$userpassword=1.*?\$userpassword=1;?g" $DIR_WEB/intercept.php
# user 'chilli' creation (in order to run conup/off and up/down scripts
chilli_exist=`grep chilli /etc/passwd|wc -l`
if [ "$chilli_exist" == "1" ]
then
userdel -r chilli 2>/dev/null
fi
groupadd -f chilli
useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
} # End of chilli ()
##################################################################
## Fonction "dansguardian" ##
## - Paramètrage du gestionnaire de contenu Dansguardian ##
##################################################################
dansguardian ()
{
mkdir -p /var/dansguardian /var/log/dansguardian
chown -R dansguardian /var/dansguardian /var/log/dansguardian
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dansguardian -c /etc/dansguardian/dansguardian.conf?g" /lib/systemd/system/dansguardian.service
$SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/dansguardian.service
[ -e $DIR_DG/dansguardian.conf.default ] || cp $DIR_DG/dansguardian.conf $DIR_DG/dansguardian.conf.default
# By default the filter is off
$SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/dansguardian.conf
# French deny HTML page
$SED "s?^language =.*?language = french?g" $DIR_DG/dansguardian.conf
# Listen only on LAN side
$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/dansguardian.conf
# DG send its flow to HAVP
$SED "s?^proxyport.*?proxyport = 8090?g" $DIR_DG/dansguardian.conf
# replace the default deny HTML page
cp -f $DIR_CONF/template.html /usr/share/dansguardian/languages/ukenglish/
cp -f $DIR_CONF/template-fr.html /usr/share/dansguardian/languages/french/template.html
# Don't log
$SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/dansguardian.conf
# on désactive par défaut le controle de contenu des pages html
$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/dansguardian.conf
cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (on commente ce qui ne l'est pas)
# on désactive par défaut le contrôle d'URL par expressions régulières
cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (on commente ce qui ne l'est pas)
# Configure Dansguardian for large site
# Minimum number of processus to handle connections
$SED "s?^minchildren =.*?minchildren = 15?g" $DIR_DG/dansguardian.conf
# Maximum number of processus to handle connections
$SED "s?^maxchildren =.*?maxchildren = 200?g" $DIR_DG/dansguardian.conf
# Run at least 8 daemons
$SED "s?^minsparechildren =.*?minsparechildren = 8?g" $DIR_DG/dansguardian.conf
# minimum number of processes to spawn
$SED "s?^preforkchildren =.*?preforkchildren = 10?g" $DIR_DG/dansguardian.conf
# maximum age of a child process before it croaks it
$SED "s?^maxagechildren =.*?maxagechildren = 1000?g" $DIR_DG/dansguardian.conf
# on désactive par défaut le contrôle de téléchargement de fichiers
[ -e $DIR_DG/dansguardianf1.conf.default ] || cp $DIR_DG/dansguardianf1.conf $DIR_DG/dansguardianf1.conf.default
$SED "s?^blockdownloads =.*?blockdownloads = off?g" $DIR_DG/dansguardianf1.conf
[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
touch $DIR_DG/lists/bannedextensionlist
touch $DIR_DG/lists/bannedmimetypelist
# 'Safesearch' regex actualisation
$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
# empty LAN IP list that won't be WEB filtered
[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
touch $DIR_DG/lists/exceptioniplist
# Keep a copy of URL & domain filter configuration files
[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
} # End of dansguardian ()
##################################################################
## Fonction "antivirus" ##
## - configuration of havp, libclamav and freshclam ##
##################################################################
antivirus ()
{
# create 'havp' user
havp_exist=`grep havp /etc/passwd|wc -l`
if [ "$havp_exist" == "1" ]
then
userdel -r havp 2>/dev/null
groupdel havp 2>/dev/null
fi
groupadd -f havp
useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
mkdir -p /var/tmp/havp /var/log/havp /var/run/havp /var/log/clamav /var/lib/clamav
chown -R havp:havp /var/tmp/havp /var/log/havp /var/run/havp
chown -R clamav:clamav /var/log/clamav /var/lib/clamav
[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
$SED "s?^# PIDFILE.*?PIDFILE /var/run/havp/havp.pid?g" /etc/havp/havp.config # pidfile
$SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config # transparent mode
$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config # we listen only on loopback
$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config # datas come on port 8090 (on loopback)
$SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config # Log format
$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config # active libclamav AV
$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config # log only when malware matches
$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config # 10 daemons are started simultaneously
$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config # doesn't scan image files
$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
# skip checking of youtube flow (too heavy load / risk too low)
[ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
echo "# Whitelist youtube flow" >> /etc/havp/whitelist
echo "*.youtube.com/*" >> /etc/havp/whitelist
# adapt init script and systemd unit
[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
cp -f $DIR_CONF/havp-init /etc/init.d/havp
[ -e /lib/systemd/system/havp.service.default ] || cp /lib/systemd/system/havp.service /lib/systemd/system/havp.service.default
$SED "/^PIDFile/i ExecStartPre=/bin/mkdir -p /var/run/havp" /lib/systemd/system/havp.service
$SED "/^PIDFile/i ExecStartPre=/bin/chown -R havp:havp /var/run/havp /var/log/havp" /lib/systemd/system/havp.service
# replace of the intercept page (template)
cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
# update virus database every 4 hours (24h/6)
[ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
$SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
$SED "/^DatabaseMirror/i DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
$SED "/^DatabaseMirror db.fr.clamav.net/i DatabaseMirror switch.clamav.net" /etc/freshclam.conf
$SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
# update now
/usr/bin/freshclam --no-warnings
} # End of antivirus ()
##########################################################################
## Fonction "tinyproxy" ##
## - configuration of tinyproxy (proxy between filterde users and havp) ##
##########################################################################
tinyproxy ()
{
tinyproxy_exist=`grep tinyproxy /etc/passwd|wc -l`
if [ "$tinyproxy_exist" == "1" ]
then
userdel -r tinyproxy 2>/dev/null
groupdel tinyproxy 2>/dev/null
fi
groupadd -f tinyproxy
useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
mkdir -p /var/run/tinyproxy /var/log/tinyproxy
chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
[ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
$SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf # Listen Port
$SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf # Listen NIC (only intif)
$SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^#PidFile.*?PidFile \"/var/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf # Only errors are logged
$SED "s?^#Upstream.*?Upstream 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf # forward to HAVP
$SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf # Stealth mode
$SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf # Allow from LAN
# Create the systemd unit
cat << EOF > /lib/systemd/system/tinyproxy.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit launches tinyproxy (a very light proxy).
# The "sleep 2" is needed because the pid file isn't ready for systemd
[Unit]
Description=Tinyproxy Web Proxy Server
After=network.target iptables.service
[Service]
Type=forking
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /var/run/tinyproxy /var/log/tinyproxy
ExecStartPre=/bin/sleep 2
PIDFile=/var/run/tinyproxy/tinyproxy.pid
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf
[Install]
WantedBy=multi-user.target
EOF
} # end of tinyproxy
##################################################################################
## function "ulogd" ##
## - Ulog config for multi-log files ##
##################################################################################
ulogd ()
{
# Three instances of ulogd (three different logfiles)
[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
nl=1
for log_type in traceability ssh ext-access
do
[ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
[ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
$SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
if [ "$ARCH" == "i586" ]; then $SED "s/lib64/lib/g" /etc/ulogd-$log_type.conf; fi
cat << EOF >> /etc/ulogd-$log_type.conf
[emu1]
file="/var/log/firewall/$log_type.log"
sync=1
EOF
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
nl=`expr $nl + 1`
done
chown -R root:apache /var/log/firewall
chmod 750 /var/log/firewall
chmod 640 /var/log/firewall/*
} # End of ulogd ()
##########################################################
## Function "nfsen" ##
## - install the nfsen grapher ##
## - install the two plugins porttracker & surfmap ##
##########################################################
nfsen()
{
tar xzf ./conf/nfsen/nfsen-1.3.7.tar.gz -C /tmp/
# Add PortTracker plugin
for i in /var/www/html/acc/manager/nfsen/plugins /var/log/netflow/porttracker /usr/share/nfsen/plugins
do
[ ! -d $i ] && mkdir -p $i && chown -R apache:apache $i
done
$SED "s?^my \$PORTSDBDIR =.*?my \$PORTSDBDIR = \"/var/log/netflow/porttracker\";?g" /tmp/nfsen-1.3.7/contrib/PortTracker/PortTracker.pm
# use of our conf file and init unit
cp $DIR_CONF/nfsen/nfsen.conf /tmp/nfsen-1.3.7/etc/
# Installation of nfsen (we change a little 'install.pl in order not to ask the user for the perl version)
DirTmp=$(pwd)
cd /tmp/nfsen-1.3.7/
/usr/bin/perl install.pl etc/nfsen.conf
/usr/bin/perl install.pl etc/nfsen.conf # to avoid a Perl mistake "Semaphore introuvable"
# Create RRD DB for porttracker (only in it still doesn't exist)
cp contrib/PortTracker/PortTracker.pm /usr/share/nfsen/plugins/
cp contrib/PortTracker/PortTracker.php /var/www/html/acc/manager/nfsen/plugins/
if [ "$(ls -A "/var/log/netflow/porttracker" 2>&1)" = "" ]; then sudo -u apache nftrack -I -d /var/log/netflow/porttracker; else echo "RRD DB already exists"; fi
chmod -R 770 /var/log/netflow/porttracker
# nfsen unit for systemd
cat << EOF > /lib/systemd/system/nfsen.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit launches nfsen (a Netflow grapher).
[Unit]
Description= NfSen init script
After=network.target iptables.service
[Service]
Type=oneshot
RemainAfterExit=yes
PIDFile=/var/run/nfsen/nfsen.pid
ExecStartPre=/bin/mkdir -p /var/run/nfsen
ExecStartPre=/bin/chown apache:apache /var/run/nfsen
ExecStart=/usr/bin/nfsen start
ExecStop=/usr/bin/nfsen stop
ExecReload=/usr/bin/nfsen restart
TimeoutSec=0
[Install]
WantedBy=multi-user.target
EOF
# Add the listen port to collect netflow packet (nfcapd)
$SED "s?'\$ziparg $extensions.*?\$ziparg $extensions -b 127.0.0.1;'?g" /usr/libexec/NfSenRC.pm
# expire delay for the profile "live"
/usr/bin/systemctl start nfsen
/bin/nfsen -m live -e 62d 2>/dev/null
# add SURFmap plugin
cp $DIR_CONF/nfsen/SURFmap_v3.3.1.tar.gz /tmp/
cp $DIR_CONF/nfsen/GeoLiteCity* /tmp/
tar xzf /tmp/SURFmap_v3.3.1.tar.gz -C /tmp/
cd /tmp/
/usr/bin/sh SURFmap/install.sh
chown -R apache:apache /var/www/html/acc/manager/nfsen /usr/share/nfsen
# clear the installation
cd $DirTmp
rm -rf /tmp/nfsen*
rm -rf /tmp/SURFmap*
} # End of nfsen ()
##################################################
## Function "vnstat" ##
## Initialization of Vnstat and vnstat phpFE ##
##################################################
vnstat ()
{
[ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
$SED "s?Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
[ -e $DIR_ACC/manager/stats/config.php.default ] || cp $DIR_ACC/manager/stats/config.php $DIR_ACC/manager/stats/config.php.default
$SED "s?\$iface_list =.*?\$iface_list = array('$EXTIF');?g" $DIR_ACC/manager/stats/config.php
/usr/bin/vnstat -u -i $EXTIF
} # End of vnstat
##################################################
## Function "dnsmasq" ##
##################################################
dnsmasq ()
{
[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
[ -e /etc/sysconfig/dnsmasq.default ] || cp /etc/sysconfig/dnsmasq /etc/sysconfig/dnsmasq.default
# $SED "s?^OPTION=.*?OPTION=-C /etc/dnsmasq.conf?g" /etc/sysconfig/dnsmasq # default conf file for the first dnsmasq instance
$SED "s?^.*OPTIONS=.*?#OPTIONS=\"--log-async=250 --log-queries --log-facility=/var/log/dnsmasq/queries.log\"?g" /etc/sysconfig/dnsmasq # General Options for dnslog or debugging
$SED "s?^local=.*?local=/$DOMAIN/?g" $DIR_DEST_ETC/alcasar-dns-name # default domain name for all dnsmasq daemons
[ -e /etc/dnsmasq.conf.default ] || cp /etc/dnsmasq.conf /etc/dnsmasq.conf.default
# 1st dnsmasq listen on udp 53 ("dnsmasq - forward"). It's used as dhcp server only if "alcasar-bypass" is on.
cat << EOF > /etc/dnsmasq.conf
# Configuration file for "dnsmasq in forward mode"
conf-file=$DIR_DEST_ETC/alcasar-dns-name # local DNS resolutions
listen-address=$PRIVATE_IP
pid-file=/var/run/dnsmasq.pid
listen-address=127.0.0.1
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=2048
domain-needed
expand-hosts
bogus-priv
filterwin2k
server=$DNS1
server=$DNS2
# DHCP service is configured. It will be enabled in "bypass" mode
#dhcp-range=$PRIVATE_FIRST_IP,$PRIVATE_LAST_IP,$PRIVATE_NETMASK,12h
#dhcp-option=option:router,$PRIVATE_IP
#dhcp-option=option:ntp-server,$PRIVATE_IP
#domain=$DOMAIN
# Exemple of static dhcp assignation : <@MAC>,<name>,<@IP>,<MASK>,<ttl bail>
#dhcp-host=11:22:33:44:55:66,ssic-test,192.168.182.20,255.255.255.0,45m
EOF
# 2nd dnsmasq listen on udp 54 ("dnsmasq with blacklist")
cat << EOF > /etc/dnsmasq-blacklist.conf
# Configuration file for "dnsmasq with blacklist"
# Add Toulouse University blacklist domains
conf-file=$DIR_DEST_ETC/alcasar-dns-name # local DNS resolutions
conf-dir=$DIR_DEST_SHARE/dnsmasq-bl-enabled
pid-file=/var/run/dnsmasq-blacklist.pid
listen-address=$PRIVATE_IP
port=54
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=2048
domain-needed
expand-hosts
bogus-priv
filterwin2k
server=$DNS1
server=$DNS2
EOF
# 3rd dnsmasq listen on udp 55 ("dnsmasq with whitelist")
cat << EOF > /etc/dnsmasq-whitelist.conf
# Configuration file for "dnsmasq with whitelist"
# ADD Toulouse university whitelist domains
conf-file=$DIR_DEST_ETC/alcasar-dns-name # local DNS resolutions
conf-dir=$DIR_DEST_SHARE/dnsmasq-wl-enabled
pid-file=/var/run/dnsmasq-whitelist.pid
listen-address=$PRIVATE_IP
port=55
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=1024
domain-needed
expand-hosts
bogus-priv
filterwin2k
ipset=/#/wl_ip_allowed # dynamicly add the resolv IP address in the Firewall rules
address=/#/$PRIVATE_IP # for Domain name without local resolution (WL)
EOF
# 4th dnsmasq listen on udp 56 ("blackhole")
cat << EOF > /etc/dnsmasq-blackhole.conf
# Configuration file for "dnsmasq as a blackhole"
conf-file=$DIR_DEST_ETC/alcasar-dns-name # local DNS resolutions
address=/#/$PRIVATE_IP # redirect all on ALCASAR IP address
pid-file=/var/run/dnsmasq-blackhole.pid
listen-address=$PRIVATE_IP
port=56
no-dhcp-interface=$INTIF
no-dhcp-interface=tun0
no-dhcp-interface=lo
bind-interfaces
cache-size=256
domain-needed
expand-hosts
bogus-priv
filterwin2k
EOF
# the main instance should start after network and chilli (which create tun0)
[ -e /lib/systemd/system/dnsmasq.service.default ] || cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
$SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/dnsmasq.service
# Create dnsmasq-blacklist, dnsmasq-whitelist and dnsmasq-blackhole unit
for list in blacklist whitelist blackhole
do
cp -f /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq-$list.service
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-$list.conf?g" /lib/systemd/system/dnsmasq-$list.service
$SED "s?^PIDFile=.*?PIDFile=/var/run/dnsmasq-$list.pid?g" /lib/systemd/system/dnsmasq-$list.service
done
} # End dnsmasq
##########################################################
## Fonction "BL" ##
##########################################################
BL ()
{
# copy the Toulouse university BL in order to be adapted to ALCASAR architecture (alcasar-bl.sh -adapt)
rm -rf $DIR_DG/lists/blacklists
mkdir -p /tmp/blacklists
cp $DIR_BLACKLIST/blacklists.tar.gz /tmp/blacklists/
# creation of file for the rehabilited domains and urls
[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
touch $DIR_DG/lists/exceptionsitelist
touch $DIR_DG/lists/exceptionurllist
# On crée la configuration de base du filtrage de domaine et d'URL pour Dansguardian
cat <<EOF > $DIR_DG/lists/bannedurllist
# Dansguardian filter config for ALCASAR
EOF
cat <<EOF > $DIR_DG/lists/bannedsitelist
# Dansguardian domain filter config for ALCASAR
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
#**
# block all SSL and CONNECT tunnels
**s
# block all SSL and CONNECT tunnels specified only as an IP
*ips
# block all sites specified only by an IP
*ip
EOF
# Add Bing to the safesearch url regext list (parental control)
cat <<EOF >> $DIR_DG/lists/urlregexplist
# Bing - add 'adlt=strict'
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
EOF
# change the google safesearch ("safe=strict" instead of "safe=vss")
$SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
# creation of the custom BL and WL categorie named "ossi" (for domain names & ip only)
mkdir -p $DIR_DG/lists/blacklists/ossi-bl
touch $DIR_DG/lists/blacklists/ossi-bl/domains
echo "ossi-bl" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
mkdir -p $DIR_DG/lists/blacklists/ossi-wl
touch $DIR_DG/lists/blacklists/ossi-wl/domains
echo "ossi-wl" >> $DIR_DEST_ETC/alcasar-wl-categories-enabled
# add custom ALCASAR BL files
for x in $(ls $DIR_BLACKLIST | grep -v "^blacklist")
do
mkdir $DIR_DG/lists/blacklists/ossi-bl-$x
cp $DIR_BLACKLIST/$x $DIR_DG/lists/blacklists/ossi-bl-$x/domains
echo "ossi-bl-$x" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
done
chown -R dansguardian:apache $DIR_DG
chown -R root:apache $DIR_DEST_SHARE
chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
# adapt the Toulouse BL to ALCASAR architecture
$DIR_DEST_BIN/alcasar-bl.sh --adapt
# enable the default categories
$DIR_DEST_BIN/alcasar-bl.sh --cat_choice
}
##########################################################
## Fonction "cron" ##
## - Mise en place des différents fichiers de cron ##
##########################################################
cron ()
{
# Modif du fichier 'crontab' pour passer les cron à minuit au lieu de 04h00
[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
cat <<EOF > /etc/crontab
SHELL=/usr/bin/bash
PATH=/usr/sbin:/usr/bin
MAILTO=root
HOME=/
# run-parts
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
EOF
[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
cat <<EOF >> /etc/anacrontab
7 8 cron.MysqlDump nice /etc/cron.d/alcasar-mysql
7 10 cron.logExport nice /etc/cron.d/alcasar-archive
7 20 cron.importClean nice /etc/cron.d/alcasar-clean_import
EOF
cat <<EOF > /etc/cron.d/alcasar-mysql
# Contrôle, réparation et export de la base des usagers (tous les lundi à 4h45)
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
# Nettoyage des utilisateurs dont la date d'expiration du compte est supérieure à 7 jours
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
EOF
cat <<EOF > /etc/cron.d/alcasar-archive
# Archive des logs et de la base de données (tous les lundi à 5h35)
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
EOF
cat << EOF > /etc/cron.d/alcasar-ticket-clean
# suppression des fichiers de mots de passe (imports massifs par fichier) et des ticket PDF d'utilisateur
30 * * * * root $DIR_DEST_BIN/alcasar-ticket-clean.sh
EOF
cat << EOF > /etc/cron.d/alcasar-distrib-updates
# mise à jour automatique de la distribution tous les jours 3h30
30 3 * * * root /usr/sbin/urpmi --auto-update --auto 2>&1
EOF
cat << EOF > /etc/cron.d/alcasar-connections-stats
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
# 'alcasar-tot_stats' (everyday at 01h01 pm) : aggregating the daily connections of users (write in the table 'totacct')
# 'alcasar-monthly_tot_stat' (everyday at 01h05 pm) : aggregating the monthly connections of users (write in table 'mtotacct')
# 'alcasar-truncate_raddact' (every month, the first at 01h10 pm) : removing the log sessions of users older than 365 days
# 'alcasar-clean_radacct' (every month, the first at 01h15 pm) : closing the sessions openned for more than 30 days
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
EOF
cat << EOF > /etc/cron.d/alcasar-watchdog
# run the "watchdog" every 3'
# empty the IPSET of the whitelisted IP (loaded dynamically with dnsmasq-whitelist) when every whitelisted users are logged out (every sunday at 0h05
*/3 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
0 5 * * 0 root $DIR_DEST_BIN/alcasar-flush_ipset_wl.sh > /dev/null 2>&1
EOF
# Enabling the watchdog every 18'
cat << EOF > /etc/cron.d/alcasar-daemon-watchdog
# activate the daemon-watchdog after boot process
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
# activate the daemon-watchdog every 18'
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
EOF
# Enabling category update from rsync
cat << EOF > /etc/cron.d/alcasar-rsync_bl
# Automatic update of BL via rsync every 12 hours. The categories are listed in the file '/usr/local/etc/update_cat.conf' (no sync if empty).
0 */12 * * * root $DIR_DEST_BIN/alcasar-bl.sh --update_cat > /dev/null 2>&1
EOF
# removing the users crons
rm -f /var/spool/cron/*
} # End cron
##################################################################
## Fonction "Fail2Ban" ##
##- Modification de la configuration de fail2ban ##
##- Sécurisation DDOS, SSH-Brute-Force, Intercept.php ... ##
##################################################################
fail2ban()
{
$DIR_CONF/fail2ban.sh
# Autorise la lecture seule 2 des 3 fichiers de log concernés, havp est traité dans le script d'init de havp
[ -e /var/log/fail2ban.log ] || touch /var/log/fail2ban.log
[ -e /var/Save/security/watchdog.log ] || touch /var/Save/security/watchdog.log
chmod 644 /var/log/fail2ban.log
chmod 644 /var/Save/security/watchdog.log
/usr/bin/touch /var/log/auth.log
# fail2ban unit
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
$SED '/Type=/a\PIDFile=/var/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
$SED '/After=*/c After=syslog.target network.target httpd.service' /usr/lib/systemd/system/fail2ban.service
} #Fin de fail2ban_install()
##################################################################
## Fonction "gammu_smsd" ##
## - Creation de la base de donnée Gammu ##
## - Creation du fichier de config: gammu_smsd_conf ##
## ##
##################################################################
gammu_smsd()
{
# Create 'gammu' databse
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --exec"
$MYSQL="CREATE DATABASE IF NOT EXISTS $DB_GAMMU;GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES"
# Add a gammu database structure
mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql
# config file for the daemon
cat << EOF > /etc/gammu_smsd_conf
[gammu]
port = /dev/ttyUSB0
connection = at115200
;########################################################
[smsd]
PIN = 1234
logfile = /var/log/gammu-smsd/gammu-smsd.log
logformat = textall
debuglevel = 0
service = sql
driver = native_mysql
user = $DB_USER
password = $radiuspwd
pc = localhost
database = $DB_GAMMU
RunOnReceive = $DIR_DEST_BIN/alcasar-sms.sh --new_sms
StatusFrequency = 30
;LoopSleep = 2
;ResetFrequency = 300
;HardResetFrequency = 120
CheckSecurity = 1
CheckSignal = 1
CheckBattery = 0
EOF
chmod 755 /etc/gammu_smsd_conf
#Creation dossier de log Gammu-smsd
[ -e /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
chmod 755 /var/log/gammu-smsd
#Edition du script sql gammu <-> radius
$SED "s/^u_db=\".*/u_db=\"$DB_USER\"/g" $DIR_DEST_BIN/alcasar-sms.sh
$SED "s/^p_db=\".*/p_db=\"$radiuspwd\"/g" $DIR_DEST_BIN/alcasar-sms.sh
#Création de la règle udev pour les Huawei // idVendor: 12d1
cat << EOF > /etc/udev/rules.d/66-huawei.rules
KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
EOF
} # END gammu_smsd()
##################################################################
## Fonction "post_install" ##
## - Modification des bannières (locales et ssh) et des prompts ##
## - Installation de la structure de chiffrement pour root ##
## - Mise en place du sudoers et de la sécurité sur les fichiers##
## - Mise en place du la rotation des logs ##
## - Configuration dans le cas d'une mise à jour ##
##################################################################
post_install()
{
# création de la bannière locale
[ -e /etc/mageia-release.default ] || cp /etc/mageia-release /etc/mageia-release.default
cp -f $DIR_CONF/banner /etc/mageia-release
echo " V$VERSION" >> /etc/mageia-release
# création de la bannière SSH
cp /etc/mageia-release /etc/ssh/alcasar-banner-ssh
chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
# postfix banner anonymisation
$SED "s?^smtpd_banner =.*?smtpd_banner = $myhostname ESMTP?g" /etc/postfix/main.cf
chown -R postfix:postfix /var/lib/postfix
# sshd écoute côté LAN et WAN
$SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
# sshd autorise les connections root par certificat
$SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
# Put the default values in conf file
echo "SSH=on" >> $CONF_FILE
echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
echo "LDAP=off" >> $CONF_FILE
echo "LDAP_IP=0.0.0.0/0.0.0.0" >> $CONF_FILE
echo "MULTIWAN=off" >> $CONF_FILE
echo "FAILOVER=30" >> $CONF_FILE
echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
# Coloration des prompts
[ -e /etc/bashrc.default ] || cp /etc/bashrc /etc/bashrc.default
cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
# Droits d'exécution pour utilisateur apache et sysadmin
[ -e /etc/sudoers.default ] || cp /etc/sudoers /etc/sudoers.default
cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
$SED "s?^Host_Alias.*?Host_Alias LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost #réseau de l'organisme?g" /etc/sudoers
# Modify some logrotate files (gammu, ulogd)
cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
chmod 644 /etc/logrotate.d/*
# rectification sur versions précédentes de la compression des logs
$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
# actualisation des fichiers logs compressés
for dir in firewall dansguardian httpd
do
find /var/log/$dir -type f -name *.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9] -exec gzip {} \;
done
# create the alcasar-load_balancing unit
cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit lauches alcasar-load-balancing.sh script.
[Unit]
Description=alcasar-load_balancing.sh execution
After=network.target iptables.service
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
TimeoutSec=0
SysVStartPriority=99
[Install]
WantedBy=multi-user.target
EOF
# processes launched at boot time (Systemctl)
for i in alcasar-load_balancing mysqld httpd ntpd iptables dnsmasq dnsmasq-blacklist dnsmasq-whitelist dnsmasq-blackhole radiusd nfsen dansguardian freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
do
/usr/bin/systemctl -q enable $i.service
done
# disable processes at boot time (Systemctl)
for i in ulogd
do
/usr/bin/systemctl -q disable $i.service
done
# Apply French Security Agency (ANSSI) rules
# ignore ICMP broadcast (smurf attack)
echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
# ignore ICMP errors bogus
echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
# remove ICMP redirects responces
echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
# enable SYN Cookies (Syn flood attacks)
echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
# enable kernel antispoofing
echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
# ignore source routing
echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
# set conntrack timer to 1h (3600s) instead of 5 weeks
echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
# disable log_martians (ALCASAR is often installed between two private network addresses)
echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
# disable iptables_helpers
echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
# Switch to the router mode
echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
# Remove unused service ipv6
echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.all.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.default.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.default.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
# remove Magic SysReq Keys
[ -e /etc/sysctl.d/51-alt-sysrq.conf ] && rm /etc/sysctl.d/51-alt-sysrq.conf
# switch to multi-users runlevel (instead of x11)
ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
# GRUB modifications (only one time)
# limit wait time to 3s
# create an alcasar entry instead of linux-nonfb
# change display to 1024*768 (vga791)
grub_already_modified=`grep ALCASAR /boot/grub/menu.lst|wc -l`
if [ $grub_already_modified == 0 ]
then
$SED "s?^timeout.*?timeout 3?g" /boot/grub/menu.lst
$SED "s?^title linux?title ALCASAR?g" /boot/grub/menu.lst
$SED "/^kernel/s/splash quiet //" /boot/grub/menu.lst
$SED "/^kernel/s/$/ vga=791/" /boot/grub/menu.lst
$SED "/^kernel/s/BOOT_IMAGE=linux /BOOT_IMAGE=linux-nonfb /" /boot/grub/menu.lst
$SED "/^gfxmenu/d" /boot/grub/menu.lst
fi
# Load and apply the previous conf file
if [ "$mode" = "update" ]
then
$DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
$DIR_DEST_BIN/alcasar-conf.sh --load
PARENT_SCRIPT=`basename $0`
export PARENT_SCRIPT # to avoid stop&start process during the installation process
$DIR_DEST_BIN/alcasar-conf.sh --apply
$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
fi
rm -f /tmp/alcasar-conf*
chown -R root:apache $DIR_DEST_ETC/*
chmod -R 660 $DIR_DEST_ETC/*
chmod ug+x $DIR_DEST_ETC/digest
cd $DIR_INSTALL
echo ""
echo "#############################################################################"
if [ $Lang == "fr" ]
then
echo "# Fin d'installation d'ALCASAR #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- ALCASAR sera fonctionnel après redémarrage du système"
echo
echo "- Lisez attentivement la documentation d'exploitation"
echo
echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://alcasar"
echo
echo " Appuyez sur 'Entrée' pour continuer"
else
echo "# Enf of ALCASAR install process #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- The system will be rebooted in order to operate ALCASAR"
echo
echo "- Read the exploitation documentation"
echo
echo "- The ALCASAR Control Center (ACC) is at http://alcasar"
echo
echo " Hit 'Enter' to continue"
fi
sleep 2
if [ "$mode" != "update" ]
then
read a
fi
clear
reboot
} # End post_install ()
#################################
# Main Install loop #
#################################
dir_exec=`dirname "$0"`
if [ $dir_exec != "." ]
then
echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
echo "Launch this program from the ALCASAR archive directory"
exit 0
fi
VERSION=`cat $DIR_INSTALL/VERSION`
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
nb_args=1
args="-h"
fi
chmod -R u+x $DIR_SCRIPTS/*
case $args in
-\? | -h* | --h*)
echo "$usage"
exit 0
;;
-i | --install)
header_install
license
header_install
testing
# RPMs install
$DIR_SCRIPTS/alcasar-urpmi.sh
if [ "$?" != "0" ]
then
exit 0
fi
if [ -e $CONF_FILE ]
then
# Uninstall the running version
$DIR_SCRIPTS/alcasar-uninstall.sh
fi
# Test if manual update
if [ -e /tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
then
header_install
if [ $Lang == "fr" ]
then echo "Le fichier de configuration d'une ancienne version a été trouvé";
else echo "The configuration file of an old version has been found";
fi
response=0
PTN='^[oOnNyY]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous l'utiliser (O/n)? ";
else echo -n "Do you want to use it (Y/n)?";
fi
read response
if [ "$response" = "n" ] || [ "$response" = "N" ]
then rm -f /tmp/alcasar-conf*
fi
done
fi
# Test if update
if [ -e /tmp/alcasar-conf* ]
then
if [ $Lang == "fr" ]
then echo "#### Installation avec mise à jour ####";
else echo "#### Installation with update ####";
fi
# Extract the central configuration file
tar -xf /tmp/alcasar-conf* conf/etc/alcasar.conf
ORGANISME=`grep ORGANISM conf/etc/alcasar.conf|cut -d"=" -f2`
PREVIOUS_VERSION=`grep VERSION conf/etc/alcasar.conf|cut -d"=" -f2`
MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2|cut -c1`
UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3`
mode="update"
fi
for func in init network ACC CA time_server init_db radius chilli dansguardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq BL cron fail2ban gammu_smsd post_install
do
$func
# echo "*** 'debug' : end of function $func ***"; read a
done
;;
-u | --uninstall)
if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
then
if [ $Lang == "fr" ]
then echo "ALCASAR n'est pas installé!";
else echo "ALCASAR isn't installed!";
fi
exit 0
fi
response=0
PTN='^[oOnN]$'
until [[ $(expr $response : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (0/n)? ";
else echo -n "Do you want to create the running version configuration file (Y/n)? ";
fi
read response
done
if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
then
$DIR_SCRIPTS/alcasar-conf.sh --create
else
rm -f /tmp/alcasar-conf*
fi
# Uninstall the running version
$DIR_SCRIPTS/alcasar-uninstall.sh
;;
*)
echo "Argument inconnu :$1";
echo "Unknown argument :$1";
echo "$usage"
exit 1
;;
esac
# end of script