Subversion Repositories ALCASAR

#!/bin/sh
#
# $Id: alcasar-iptables-local.sh 2986 2022-01-09 17:23:00Z rexy $
#
# Custom rules for ALCASAR firewall
#
# Examples:
#       - Local MAC addresses filtering (MAC are in '/usr/local/etc/alcasar-iptables-local-mac-filtered'. Format : aa:09:23:2f:4d:ee)
#       - allow ICMP from an Internet IP address (Admin_from) to EXTIF
#       - allow SMTP from aLCASAR to an Internet server (SMTP_IP)
#       - PAT rules from Internet
#       - Deny access to protected networks from internal LAN
#       - Allow managers to access ACC from the external network
# This script inherit of alcasar-iptables.sh variables : $INTIF, $EXTIF, $IPTABLES, etc
# !!Beware, run the script "alcasar-iptables.sh" after changing this file. 

# Local MAC addresses filtering (MAC are in '/usr/local/etc/alcasar-iptables-local-mac-filtered'. Format : aa:09:23:2f:4d:ee)
if [ -s /usr/local/etc/alcasar-iptables-local-mac-filtered ]; then
        while read mac_line
        do
                ip_on=`echo $mac_line|cut -b1`
                if [ $ip_on != "#" ]
                then
                        mac_filtered=`echo $mac_line|cut -d" " -f1`
                        echo "MAC filtered = $mac_filtered"
                        $IPTABLES -A FORWARD -i $INTIF        -m mac --mac-source $mac_filtered -j NFLOG --nflog-group 1 --nflog-prefix "$mac_filtered -- Filt_DROP"
                        $IPTABLES -A FORWARD -i $INTIF -p tcp -m mac --mac-source $mac_filtered -j DROP
                        $IPTABLES -A FORWARD -i $INTIF -p udp -m mac --mac-source $mac_filtered -j DROP
                        $IPTABLES -A FORWARD -i $INTIF        -m mac --mac-source $mac_filtered -j DROP
                fi
        done < /usr/local/etc/alcasar-iptables-local-mac-filtered
fi

# On autorise le ping (echo & request) (ICMP N°0 & 8) en provenance d'Internet vers ALCASAR
# Allow ping (echo & request) (ICMP N°0 & 8) from Internet
#$IPTABLES -A INPUT  -i $EXTIF -p icmp --icmp-type 8 -j ACCEPT
#$IPTABLES -A OUTPUT -o $EXTIF -p icmp --icmp-type 0 -j ACCEPT

# On interdit les utilisateurs d'accéder à des réseaux situés entre ALCASAR et le routeur d'accès à Internet
# Deny access of users to networks connected between ALCASAR and Internet broadband router
#protectedNetworks='10.0.0.0/8,172.16.0.0/12,192.168.0.0/16' # (RFC 1918)
#[ -n "$TUNIF" ] && consultationIF=$TUNIF || consultationIF=$INTIF
#$IPTABLES -A FORWARD -i $consultationIF -d $protectedNetworks -j DROP
#$IPTABLES -A FORWARD -o $consultationIF -s $protectedNetworks -j DROP

# On autorise ALCASAR a accéder à un serveur MAIL local (envoie de rapports, alertes, etc.)
# Allow ALCASAR to conect to a local mail server (send reports, alerts, etc.)
#SMTP_IP='192.168.111.5'                # IP of mail server
#SMTP_PORT=587                  # port of mail server (25 for SMTP ; 587 for STARTTLS ; 465 for SMTPS)
#$IPTABLES -A OUTPUT -p tcp -d $SMTP_IP --dport $SMTP_PORT -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
#$IPTABLES -A INPUT  -p tcp -s $SMTP_IP --sport $SMTP_PORT -m conntrack --ctstate ESTABLISHED     -j ACCEPT

# On autorise un admin à accéder à l'ACC depuis l'extérieur (Internet ou le LAN entre ALCASAR et la BOX)
# Allow managerIP to access ACC from the external network (Internet or LAN between ALCASAR and the broadband router)
#managerIPs='192.168.0.10'
#externalPort='34443'
#$IPTABLES -t mangle -A PREROUTING -i $EXTIF -s $managerIPs -p tcp -d $PUBLIC_IP --dport $externalPort -j MARK --set-mark 100
#$IPTABLES -t nat    -A PREROUTING -i $EXTIF -s $managerIPs -p tcp -d $PUBLIC_IP --dport $externalPort -j DNAT --to $PRIVATE_IP:443
#$IPTABLES           -A INPUT      -i $EXTIF -s $managerIPs -p tcp --dport 443 -m mark --mark 100 -j ACCEPT

# On autorise l'accès depuis Internet (port 11222) vers un equipement du LAN (port 22). L'équipement sur le LAN doit être en IP fixe
# Allow access from Internet (port 11222) to an LAN equipment (port 22). The equipment must be in static IP
#$IPTABLES -A PREROUTING -i $EXTIF -t nat -p tcp -d $PUBLIC_IP --dport 11222 -j DNAT --to 192.168.182.10:22
#$IPTABLES -A PREROUTING -i $EXTIF -t nat -p udp -d $PUBLIC_IP --dport 11222 -j DNAT --to 192.168.182.10:22
#$IPTABLES -A FORWARD -p tcp -d 192.168.182.10 --dport 22 -j ACCEPT
#$IPTABLES -A FORWARD -p udp -d 192.168.182.10 --dport 22 -j ACCEPT

# On autorise l'accès depuis Internet (multiports) vers un équipement du LAN (par exemple pour un VPN). L'équipement doit être en IP fixe
# Allow access from Internet (multiports) to an LAN equipment (VPN for example). The equipment must be in static IP
#ext_ports=55022,31194; int_ports=44022,31194
#to_ip=192.168.182.7
#$IPTABLES -A PREROUTING -i $EXTIF -t nat -p tcp -d $PUBLIC_IP -m multiport --dports $ext_ports -j DNAT --to $to_ip
#$IPTABLES -A FORWARD -i $EXTIF -p tcp -d $to_ip -m multiport --dports $ext_ports -j ACCEPT
#$IPTABLES -A FORWARD -o $EXTIF -p tcp -s $to_ip -m multiport --sports $int_ports -j ACCEPT