WebSVN – ALCASAR – /scripts/alcasar-iptables-bypass.sh

#!/bin/bash
# $Id: alcasar-iptables-bypass.sh 1523 2014-12-20 18:30:19Z franck $

# alcasar-iptables-bypass.sh
# by Rexy - 3abtux
# This script is distributed under the Gnu General Public License (GPL)

# applique les regles du parefeu en mode ByPass
# put the firewall rules in 'ByPass' mode

CONF_FILE="/usr/local/etc/alcasar.conf"
private_ip_mask=`grep PRIVATE_IP= $CONF_FILE|cut -d"=" -f2`
private_ip_mask=${private_ip_mask:=192.168.182.1/24}
private_network=`/bin/ipcalc -n $private_ip_mask|cut -d"=" -f2`         # LAN IP address (ie.: 192.168.182.0)
private_prefix=`/bin/ipcalc -p $private_ip_mask|cut -d"=" -f2`          # LAN prefix (ie. 24)
IPTABLES="/sbin/iptables"
EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2`                           # EXTernal InterFace
INTIF=`grep ^INTIF= $CONF_FILE|cut -d"=" -f2`                           # INTernal InterFace
PRIVATE_NETWORK_MASK=$private_network/$private_prefix                   # Lan IP address + prefix (192.168.182.0/24)
PRIVATE_IP=`echo $private_ip_mask | cut -d"/" -f1`                      # ALCASAR LAN IP address
public_ip_mask=`grep PUBLIC_IP= $CONF_FILE|cut -d"=" -f2`               # ALCASAR WAN IP address
PUBLIC_IP=`echo $public_ip_mask | cut -d"/" -f1`
SSH=`grep SSH= $CONF_FILE|cut -d"=" -f2`                                # sshd active (on/off)
SSH=${SSH:=off}
SSH_ADMIN_FROM=`grep SSH_ADMIN_FROM= $CONF_FILE|cut -d"=" -f2`
SSH_ADMIN_FROM=${SSH_ADMIN_FROM:="0.0.0.0/0.0.0.0"}                             # WAN IP address to reduce ssh access (all ip allowed on LAN side)
PROTOCOLS_FILTERING=`grep PROTOCOLS_FILTERING= $conf_file|cut -d"=" -f2`        # Network protocols filter (on/off)
PROTOCOLS_FILTERING=${PROTOCOLS_FILTERING:=off}


# On vide (flush) toutes les règles existantes
# Flush all existing rules
$IPTABLES -F
$IPTABLES -t nat -F
$IPTABLES -F INPUT
$IPTABLES -F FORWARD
$IPTABLES -F OUTPUT

# On indique les politiques par défaut
# Default policies
$IPTABLES -P INPUT DROP
$IPTABLES -P FORWARD DROP
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -t nat -P PREROUTING ACCEPT
$IPTABLES -t nat -P POSTROUTING ACCEPT
$IPTABLES -t nat -P OUTPUT ACCEPT

# On efface toutes les chaînes qui ne sont pas par défaut dans les tables filter et nat
# Flush non default rules on filter and nat tables
$IPTABLES -X
$IPTABLES -t nat -X

# On autorise tout sur loopback
# accept all on loopback
$IPTABLES -A OUTPUT -o lo -j ACCEPT
$IPTABLES -A INPUT -i lo -j ACCEPT

# Insertion de règles de blocage (Devel)
# Here, we add block rules (Devel)
if [ -s /usr/local/etc/alcasar-iptables-block ]; then 
        while read ip_line
        do
                ip_on=`echo $ip_line|cut -b1`
                if [ $ip_on != "#" ]
                then    
                        ip_blocked=`echo $ip_line|cut -d" " -f1`
                        $IPTABLES -A FORWARD -d $ip_blocked -j ULOG --ulog-prefix "RULE IP-blocked -- REJECT "
                        $IPTABLES -A FORWARD -d $ip_blocked -j REJECT
                fi
        done < /usr/local/etc/alcasar-iptables-block
fi

# SSHD rules if activate 
if [ $SSH = on ]
        then
        $IPTABLES -A INPUT -i $INTIF -s $PRIVATE_NETWORK_MASK -d $PRIVATE_IP -p tcp --dport ssh -m state --state NEW -j ULOG --ulog-nlgroup 2 --ulog-prefix "RULE ssh-from-LAN -- ACCEPT"
        $IPTABLES -A INPUT -i $INTIF -s $PRIVATE_NETWORK_MASK -d $PRIVATE_IP -p tcp --dport ssh -m state --state NEW -j ACCEPT
        $IPTABLES -A INPUT -i $EXTIF -s $SSH_ADMIN_FROM -d $PUBLIC_IP -p tcp --dport ssh -m state --state NEW -j ULOG --ulog-nlgroup 2 --ulog-prefix "RULE ssh-from-WAN -- ACCEPT"
        $IPTABLES -A INPUT -i $EXTIF -s $SSH_ADMIN_FROM -d $PUBLIC_IP -p tcp --dport ssh -m state --state NEW -j ACCEPT
fi

# Insertion de règles locales
# Here, we add local rules (i.e. VPN from Internet)
if [ -f /usr/local/etc/alcasar-iptables-local.sh ]; then
        . /usr/local/etc/alcasar-iptables-local.sh
fi

#  If protocols filter is activate 
if [ $PROTOCOLS_FILTERING = on ]; then
        echo "PROTOCOL FILTERING = On"
        # Compute exception IP (IP addresses that shouldn't be filtered)
       nb_exceptions=`wc -l /usr/local/etc/alcasar-filter-exceptions | cut -d" " -f1`
       if [ $nb_exceptions != "0" ]
       then
               while read ip_exception 
               do
                       $IPTABLES -A FORWARD -i $INTIF -s $ip_exception -m state --state NEW -j ULOG --ulog-prefix "RULE IP-exception -- ACCEPT "
#                       $IPTABLES -A FORWARD -i $INTIF -s $ip_exception -m state --state NEW -j NETFLOW
                       $IPTABLES -A FORWARD -i $INTIF -s $ip_exception -m state --state NEW -j ACCEPT
               done < /usr/local/etc/alcasar-filter-exceptions
       fi
#       # Compute uamallowed IP (IP address of equipments connected between ALCASAR and Internet (DMZ, own servers, ...) 
#       nb_uamallowed=`wc -l /usr/local/etc/alcasar-uamallowed | cut -d" "  -f1`
#       if [ $nb_uamallowed != "0" ]
#       then
#               while read ip_allowed_line 
#               do
#                       ip_allowed=`echo $ip_allowed_line|cut -d"\"" -f2`
#                       $IPTABLES -A FORWARD -i $INTIF -d $ip_allowed -m state --state NEW -j ULOG --ulog-prefix "RULE IP-allowed -- ACCEPT "
##                       $IPTABLES -A FORWARD -i $INTIF -d $ip_allowed -m state --state NEW -j NETFLOW
#                       $IPTABLES -A FORWARD -i $INTIF -d $ip_allowed -m state --state NEW -j ACCEPT
#               done < /usr/local/etc/alcasar-uamallowed
#       fi
        # Autorisation des protocoles non commentés
        # Allow non comment protocols
        while read svc_line
        do
                svc_on=`echo $svc_line|cut -b1`
                if [ $svc_on != "#" ]
                then
                        svc_name=`echo $svc_line|cut -d" " -f1`
                        svc_port=`echo $svc_line|cut -d" " -f2`
                        if [ $svc_name = "icmp" ]
                        then
#                               $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p icmp -j NETFLOW
                                $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p icmp -j ACCEPT
                        else
                                echo "Service = $svc_port  pour $svc_name"
                                $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport $svc_port -m state --state NEW -j ULOG --ulog-prefix "RULE F_TCP-$svc_name -- ACCEPT "
#                               $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport $svc_port -m state --state NEW -j NETFLOW
                                $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport $svc_port -m state --state NEW -j ACCEPT
#                               $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p udp --dport $svc_port -m state --state NEW -j ULOG --ulog-prefix "RULE F_UDP-$svc_name -- ACCEPT "
##                              $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p udp --dport $svc_port -m state --state NEW -j NETFLOW
#                               $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p udp --dport $svc_port -m state --state NEW -j ACCEPT
                        fi
                fi
        done < /usr/local/etc/alcasar-services
        # Don't forget the HTTP port
        $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport 80 -m state --state NEW -j ULOG --ulog-prefix "RULE F_TCP-http -- ACCEPT "
#       $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport 80 -m state --state NEW -j NETFLOW
        $IPTABLES -A FORWARD -i $INTIF -s $PRIVATE_NETWORK_MASK -p tcp --dport 80 -m state --state NEW -j ACCEPT

        # Rejet explicite des autres protocoles
        # reject the others protocols
        $IPTABLES -A FORWARD -i $INTIF -j ULOG --ulog-prefix "RULE F_filter -- REJECT "
        $IPTABLES -A FORWARD -i $INTIF -p tcp -j REJECT --reject-with tcp-reset
        $IPTABLES -A FORWARD -i $INTIF -p udp -j REJECT --reject-with icmp-port-unreachable
        $IPTABLES -A FORWARD -i $INTIF -p icmp -j REJECT

else
        ## On autorise les demandes de connexions sortantes
        echo "PROTOCOL FILTERING = Off"
        $IPTABLES -A FORWARD -i $INTIF -m state --state NEW -j ULOG --ulog-prefix "RULE Transfert -- ACCEPT "
        $IPTABLES -A FORWARD -i $INTIF -m state --state NEW -j ACCEPT
fi

# on autorise les requêtes dhcp
# accept dhcp
$IPTABLES -A INPUT -i $INTIF -p udp -m udp --sport bootpc --dport bootps -j ACCEPT

# On drop le broadcast et le multicast sur les interfaces (sans Log)
# Drop broadcast & multicast
$IPTABLES -A INPUT -m addrtype --dst-type BROADCAST,MULTICAST -j DROP

# On laisse passer les ICMP echo-request et echo-reply en provenance du LAN
# Allow ping (icmp N°0 & 8) from LAN
$IPTABLES -A INPUT -i $INTIF -s $PRIVATE_NETWORK_MASK -p icmp --icmp-type 0 -j ACCEPT
$IPTABLES -A INPUT -i $INTIF -s $PRIVATE_NETWORK_MASK -p icmp --icmp-type 8 -j ACCEPT

# On autorise les retours de connexions légitimes par FORWARD
# Conntrack on forward
$IPTABLES -A FORWARD -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT
$IPTABLES -A FORWARD -p udp -j DROP

# On autorise les flux entrant ntp et dns via INTIF
$IPTABLES -A INPUT -i $INTIF -d $PRIVATE_IP -p udp --dport domain -j ACCEPT
$IPTABLES -A INPUT -i $INTIF -d $PRIVATE_IP -p udp --dport ntp -j ACCEPT

# On autorise le retour des connexions entrante déjà acceptées
$IPTABLES -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

# On interdit et on log le reste sur les 2 interfaces d'accès
$IPTABLES -A INPUT -i $INTIF -j ULOG --ulog-prefix "RULE rej-int -- REJECT "
$IPTABLES -A INPUT -i $EXTIF -j ULOG --ulog-prefix "RULE rej-ext -- REJECT "
$IPTABLES -A INPUT -p tcp -j REJECT --reject-with tcp-reset
$IPTABLES -A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable

# On active le masquage d'adresse par translation (NAT)
$IPTABLES -A POSTROUTING -t nat -o $EXTIF -j MASQUERADE

# on ne sauvegarde pas les règles. En cas de reboot, on repasse ainsi automatiquement en mode normal (bypass -off)
# Fin du script des regles du parefeu

Generated by GNU Enscript 1.6.6.

Subversion Repositories ALCASAR

(root)/scripts/alcasar-iptables-bypass.sh – Rev 1539